[Q]Help with cwm after rooting. - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi I rooted my galaxy s i9000 on 2.2 Froyo. When I boot into recovery, I only have standard Samsung 2e recovery. I have tried using rom manager to flash clockworkmod but it is not working. I have also tried using the update.zip in recovery but is sayin its not verified. So I am looking for Help
Thanks

When you boot into recovery, do the 3 button Vol up + Home + Power again! It should then load into CWR.

Help
Do you mean once in samsung 2e recovery do the three button combo again and you should go into cwm??? I just tried that and it didn't work. Any more suggestions?? I reckon that I must of just missed something

Help
Please help...

In which way you rooted your phone?
Did you install custom kernel or something?
I don't remember much about Froyo, since when I got my SGS I updated to 2.3 almost straight away.

Root 2.2
I rooted my phone on 2.2 using the one click root application for the computer

abell431 said:
I rooted my phone on 2.2 using the one click root application for the computer
Click to expand...
Click to collapse
Man rooted your phone with this:http://forum.xda-developers.com/showthread.php?t=788108

Possibly when did the cell root, put the stock kernel without cwm. You only need to download a custom kernel for example CF-Root or SpeedMod, you should look which is the PDA version installed and according to that you download the correct version. When you install it you will have access to cwm by the combination of the three buttons (Vol + + Home + Power)

hi there, don´t know if I can ask something about CWM here too????
I´ve got Firmware 2.3.3 Gingerbread, Basisbandversion I9000XXJVO, Kernel [email protected]#2, Buildnumber Gingerbread.XWJVI
can´t run CMW via Rom Manager as i´ve got 3e recovery ..... which ROM shall I flash via Odin to get the 2e recovery to install Vlockwork Mod properly??
tx in advance !!!!

Related

[Q] ClockworkMod Recovery doesn't work

Hi everyone.
I installed ROM Manager and flashed ClockworkMod Recovery, but even though the phone said it successfully flashed it, when I enter recovery mode I get the stock recovery. I even tried using the apply sdcard:update.zip option, but it gives me an error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I even considered installing Amon RA's recovery, but there doesn't seem to be a version compatible with this phone. What should I do? Is there another recovery you'd suggest me to install? If not, what can I do to get the ClockworkMod Recovery to work? Any help would be much appreciated
You must have recovery 3e. Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Sent from my GT-I9000 using XDA App
Sorry if my questions are too basic, but I'm a new Android user.
android.francis said:
You must have recovery 3e.
Click to expand...
Click to collapse
When I enter the stock recovery mode, it says Android system recovery <3e>. Does that mean anything?
android.francis said:
Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Click to expand...
Click to collapse
On the creator's blog it says that SpeedMod "works on all stock Froyo ROMs XXJPO/DXJPA/XWJPA and popular custom ROMs", although his thread doesn't state so. My ROM is Froyo I9000BUJP7; am I safe installing this kernel? Also, I don't know if it matters, but my phone is network locked.
Thanks for your help.
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
android.francis said:
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
As android.francis said your best bet is to flash a kernel with 2e. I use cf root it always does the job for me.. http://forum.xda-developers.com/showthread.php?t=788108
I am having the same issue, now installed the Speedmod kernel, how can I enter the CWR now?!
My stock recovery still says 3e
Hello,
I had the same problem and I used cf root too. It works very well and if you use a stock rom you will find the rigth kernel there. I only had some problems to find the rigth kernel for my branding firmeware, because this I flashed a stock rom before and after cf root.
Clockwordmod Rom Mgr boots into 3e but up button/power/menu button boots speedmod 2e.
Here is a weird one I think. I installed stock JVH 2.3.3 (from wuala site I9000XWJVH.7z) which I rooted with CF-Root (CF-Root-WX_NEE_JVH-v3.2-CWM3RFS.tar) and then applied Speed mod (speedmod-kernel-k15h-t24-300hz.tar). If I press the 3 button combination I get the speedmod 2e recovery and can backup and restore, install update.zips and reformat partitions to ext4 just fine. So far so good. All updates performed using ODIN.
Here is the problem. I installed a 'paid for' version of ClockworkMod Rom manager (from the market) but when I select backup or 'reboot into recovery' I get the stock 3e kernel and it fails.
Any ideas?
Thanks

[Q] some help pls!!!! - recovery mode issue!

Hello people,
I am kind of a new comer to all of this so pls bear with me......I have a Galaxy s I9000, stock Froyo 2.2.1 : JPY, BUILD NO. XFJS4.
I have root it with "1clickshot" and got from the market ROM MANAGER, AND INSTALL cwm, BUT STILL, IN RECOVERY MODE i HAVE THE STOCK ONE........."no ïnstall from zip" option...., only run from update.zip.....
ps: I also tried turning it off and use the 3 buttons combo, but .......still stock!
Can someone pls help or direct me to some sort of fix.........?
Thx a lot!!!
download cf-root or a kernel and flash that thru odin
that will give you CWM
azzledazzle said:
download cf-root or a kernel and flash that thru odin
that will give you CWM
Click to expand...
Click to collapse
ok......but how to find out witch versions are good for my rom version.......?......i saw that there are a lot of ver......
ps: in my recovery menu it's states it is e3...........is it right.........shoulnt i have the e2 version?
Open phone like you want to call someone then type this code
*#1234# and then you will se PDA version.after that use cf root and root it.you can see product code via kids also.
[email protected]
i did some reading.....but now i only have to figure out what kind of kernel i want ........or witch one is best for my stock version.........thx guys......xda ruless
Just boot in recovery n let it show 3e. Just choose to install update.zip n ur cwm recovery will show up..
Sent from my Desire HD using Tapatalk
If you want to stay to close stock use cf root .it works.
[email protected]
moonstar_paddy said:
Just boot in recovery n let it show 3e. Just choose to install update.zip n ur cwm recovery will show up..
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
thx......allready tried it.......but it says : "signature verification failed - instalation aborded"................so no cwm ........is there a fix to this ?.........cause i don't want to flash a new kernel just yet

[Soved] CWM on Captivate - Help Needed

Hi Guys,
I just a Captivate from from a fellow xda member.
The phone is already rooted with superuser installed.
Now I want to install CWM on it manually (not through ROM Manager, coz I like to do it manually).
I am trying the method posted here http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide.
The drivers are installed and when I try to Hardcore's SpeedMod Kernel I get error -12 from Heimdall Suite.
For me the 3 button download mode does not work, volume down + up and then attach usb cable works.
I am on UCKB1. Recovery 3e
Questions -
Do I need to apply the 3 button fix? from what I have read I do not need to,
How Do i fix the 12 error, I have rebooted my machine and the phone as well.
Thanks
EDIT-SOLVED
Downloaded this file http://forum.xda-developers.com/attachment.php?attachmentid=522490&d=1298201640
and flashed via Odin. 3e recovery replaced with CWM

[Q] Download mode menu missing

Hi guys. Recently I bought a used I896 with I897UCKF1 2.3.3 firmware. I cannot root it or upgrade it to ICS cos I have a problem: when I press vol down button plus power button to enter download mode the phone boots normally. When I press vol up plus power button instead of recovery mode my phone enters "Android system recovery <3e>". Any advice what to do?
The combination for recovery is vol up/down+power. You will need to flash a kernel with ClockworkMod recovery baked in.
Why didn't you also tell him the proper dl mode combo?
Anyway... Its both volume buttons only, no power at all, and inserting a USB cable that boots into download mode.
[QUOTEAnyway... Its both volume buttons only, no power at all, and inserting a USB cable that boots into download mode.[/QUOTE]
Thans a lot man. My Cappy is now rooted and having 2.3.5. Right now I'm looking for a stable ICS rom. Any suggestions will be appreciated.
korockinout13 said:
The combination for recovery is vol up/down+power. You will need to flash a kernel with ClockworkMod recovery baked in.
Click to expand...
Click to collapse
Can you recommend me a kernel with cwm recovery? In my Samsung recovery menu 3e I do not have "install zip from sd card" option. Or may I use Rom Manager Premium to install ICS .zip rom?
If you are on Gingerbread and an i897 rom (KF1 would meet that requirement), you can flash boog's kernel, which will have CWM baked in.
You'll need to use something like Odin or Heimdall to get there, which boog includes in the files listed above.
The other option is to flash a stock rom with a CWM kernel included, like the one in my signature.
I'm on UCKK4 - 2.3.5. Is it ok to flash that kernel? And I ask you guys who have ICS on your Cappy is it worth to install it now or should I wait for more stable versions?
You should be able to use Boog's kernel. If you want to be 100% sure of a match, you can try corn kernel KK4.
ICS is pretty great, but be aware there is a risk (although small) of the internal SD card being messed up. Look for "Encryption Unsuccessful" in the development forum - if you flash ICS, just know what to do if that situation happens.
Hmm, you made think about it. I'm not so sure anymore about ICS. I think it's better waiting for a while. I also have a i9000 and installed ICS on it and there was a problem with external sd.
Finally I installed a 4.0.3 rom and I have to admit it was a mistake. Now I'm looking forward to get back to UCKK4 2.3.5 but I don't really know how to do it. On my internal memory I have the backup of the 2.3.5 version made before getting to 4.0.3 and I tried to restore it from the recovery menu but it doesn't work. I think I'm missing something. Can you help me? Thankx.
erycx said:
Finally I installed a 4.0.3 rom and I have to admit it was a mistake. Now I'm looking forward to get back to UCKK4 2.3.5 but I don't really know how to do it. On my internal memory I have the backup of the 2.3.5 version made before getting to 4.0.3 and I tried to restore it from the recovery menu but it doesn't work. I think I'm missing something. Can you help me? Thankx.
Click to expand...
Click to collapse
You'll need to flash back to the 2.3.5 rom you had before flashing to ICS (whatever rom you were using when you made the backup), then restore the backup in recovery.
jmtheiss said:
You'll need to flash back to the 2.3.5 rom you had before flashing to ICS (whatever rom you were using when you made the backup), then restore the backup in recovery.
Click to expand...
Click to collapse
Can you be more specific please? What are the steps I need to follow?
AOKP build 32 is very stable for me if your looking to give ics another chance. Make sure you do all the proper wipes before flashing.
Sent from my glitched ICS Captivate using XDA App
erycx said:
Can you be more specific please? What are the steps I need to follow?
Click to expand...
Click to collapse
Grab an Odin or Heimdall one-click to get back to stock KK4, and flash that. Once you've flashed back to stock KK4, if you were using any custom rom (anything non-stock), flash that to your phone. (The idea is to be as close to your previous setup as you can be.)
Once you've done those steps, reboot into recovery and go to "backup/restore". In the restore options, look for the backup you made and restore it.
cmilldrummin said:
AOKP build 32 is very stable for me if your looking to give ics another chance. Make sure you do all the proper wipes before flashing.
Click to expand...
Click to collapse
Ok, if you say so, I'll try it. It crossed my mind to give ICS the second chance but I didn't know exactly what rom to try. I supose I need to do a wipe cache from recovery mode and after this I have to use the option install from sd card? Am I right?
What ROM are you coming from before ics?
Sent from my glitched ICS Captivate using XDA App
jmtheiss said:
Grab an Odin or Heimdall one-click to get back to stock KK4, and flash that. Once you've flashed back to stock KK4, if you were using any custom rom (anything non-stock), flash that to your phone. (The idea is to be as close to your previous setup as you can be.)
Click to expand...
Click to collapse
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
cmilldrummin said:
What ROM are you coming from before ics?
Sent from my glitched ICS Captivate using XDA App
Click to expand...
Click to collapse
I897UCKK4
erycx said:
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
Click to expand...
Click to collapse
I'm not sure what that file is - it may be fine, but I don't want to say "flash away!" and leave you with a messed up phone.
I would suggest going here and grabbing the non-bootloader Odin one-click (assuming one-clicks have worked for you in the past). Flash that, and you should be good to go with KK4.
erycx said:
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
Click to expand...
Click to collapse
that is safe to flash. that is the kk4 stock.
that is all i have to add to this discussion.

Help getting cwm

Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
GendelD said:
Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Click to expand...
Click to collapse
flash GingeBread 2.3.6(Maybe xxjvu or JW4) and flash cf-root.
you may follow this http://forum.xda-developers.com/showthread.php?t=2149455
to use custom rom GB 2.3.6 is a good start, if you want to flash cm10.1 i suggest after you flash CM7(GB) -> cm9 (ICS) ->CM10 (JB) to avoid lost imei.

Categories

Resources