SOLVED.
Hi, this is my first post, so if this is not the right place to ask it, please move it to where it corresponds, and forgive me...
well the thing is, that i installed xdandroid (FRX07.1) on my topaz, using this thread:
http://forum.xda-developers.com/showthread.php?t=1178546
and it works almost perfect (BT working, Wifi working, GPS sometimes doesnt work, but normally yes, etc...) except for the little detail that when there is an incoming phone call, the call screen appears (sometimes with a little delay, but no problem) and when i slide the pick up phonecall button to the right, to pick up the phone call, it seems like it has really picked up the phone call, but i cant hear anything, and on seconds 8-9 of the phone call, the phone shutdowns and reboots to windows mobile.
I have already updated to the latest kernels files, but the problem keeps appearing, i dont know what to do (im a noob, sorry for that), so if anyone could help me, or know what it could be happening, i would really appreciatte it.
thank you very much (and sorry for my english, im spaniard)
fix
it's a bug, its in the buglist, you have to make an outbound call after you booted android. you can just call yourself, and you can receive calls.
had this problem myself too.
oh! seems i didnt read enough, thank you very much, michiel!!
outgoing call not possible
Hello,
same problem here. Also general no Sound over internal speakers.
A outgoing call after clean install not possible because the phone will reboot after 3-4 seconds ring.
The problem persists on all Builds, all Kernels, all SD-Cards.
Edit:
Problem is solved. the cause wa custum rom WM6.5 EVO.N-3.9.
With a other WM6.5 Custum Rom now works Gingerbrad with both Kernels (.27 or .35)
Related
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
Anyone else had anything like this:
When the phone first boots up its perfectly fine, calls work both ways, it plays music no problem.
However leave it sitting on the side for 15-20 mins and then get a call, the phone receives it but makes no noise, answer call an the phone doesnt even sound like its picked it up it's just silent, can' hear person, they can't hear you. Same on outbound calls the phone is just dead i cant hear anything an receiver cant hear me. But the phone does no the call is connected as it rumbles when the person answers but i never hear the ringing before that.
Also once it is in this state, got to music on the phone and click play and there is no sound at all!
This has happened even after updating to newer official rom as well.
Any ideas???
Many Thanks
I am having exactly the same problem.... All sound from the phone just stops working, also the alarm, which means I can never trust my phone to wake me up in the mornings!
Another problem with the phone is that when the phone is called it takes a while for the phone to ring. I have tried to call my phone from a landline and it actually rings three times before the diamond makes a noise!
The latest Tweak 2k2 software solves the 3s ring delay problem...
Do you have a link for this?
Thanks
http://www.tweaks2k2.com/
Some users here were also tweaking the registry, but i solved the problem this kind of way...
My phone has developed a strange problem whereby it no longer makes any audible tone when someone rings! If I set it to vibrate, it does indeed vibrate, but if its set to ring, its completely silent. The incoming call notification is displayed from S2U2, and I’ve tried changing the ringtone to ensure it wasn’t having difficulty finding the file, but it doesn’t seem to work. I’ve verified the volume is set to ring, but its still not working. Has anyone experienced this or able to suggest a possible fix?
6.1 stock att tilt
I have the same problem and really like some help towad this matter. see mines is a little different it rings,but it's low but once the call comes to the end of the call volume get loud like it should at the begening. i thinks the cause of this is the s2u2 on my tilt . everything works but incoming call is so low ,I do't know someone was calling until they hang up the volume comes back it's like s2u2 ver.136 muffes my ringtone untile the call end someone please take the time out and give alittle help over here plz asp.
I have the same problem too. I changed from ATT stock ROM to Garmin DK 1.2 ROM and then after a month, the phone stopped ringing for incoming calls. I upgraded the ROM to Garmin DK 2 and the problem temporarily vanished and then started again after about a month.
Does anyone know about this problem? For now, I am installing the HTC Kaiser ROM to test if that solves the problem.
random freezing
I've been having the similar issues with my tilt. It freezes and will vibrate when a call comes, but no sound and it won't stop vibrating until i soft reset. It does it randomly and sometimes it freezes before the number can be displayed so it is shown as an unknown number and i don't know who's calling because after the phone restarts the last call is not in the history. I have a few programs installed like skyfire, tcpmp, s2p, and i use my bluetooth headset at almost all times and i still can't answer with the headset on. I also have the HTC home plugin installed but it came with the windows mobile 6.1 update.
idea
Hya,
I had the same problem with my Niki and it intercame even with the Kaiser.
On Niki the problem was on WM6.0 .. after I upgraded no problem came. The "vibration freeze" never happened again and it's ringing every time.
On Kaiser the problem was in mirror. The ringing functioned well with WM6.0 and the problem came with the upgrade to WM6.1.
I can only think that the problem was that the ROM was broken but not sure.
An idea which I can gave to you to resolve a bit the problem is to install SPB phone suit where you can set ringtones to the calls, SMS, MMS and e-mails (and on newer versions maybe to many other things). It worked on my Niki `till I didn't upgraded (I didn't try it on WM6.1).
Never tried on Kayser but it worked for sure on Hermes.
Just try it, you can be sure that you don't brake anything and SPB phone suite for me was a usefull prog. Friendly interface, easy use and VERY usefull.
Have luck
hi guys, ever since i got my phone (and rooted it and rommed it the next day), i have always randomly heard beeping noises when im talking.
it sounds like an incoming call but there is nothing that shows it.
anyone have a solution to this?
vyraz said:
hi guys, ever since i got my phone (and rooted it and rommed it the next day), i have always randomly heard beeping noises when im talking.
it sounds like an incoming call but there is nothing that shows it.
anyone have a solution to this?
Click to expand...
Click to collapse
By any chance did you enable the minute reminder for outgoing calls?
that was the first thing i checked. the minute thing isnt on. it sounded exactly like an incoming call. but it wasnt
humm.. can you give more details on which ROM and Kernal are you on now ?
did you install any other apps that would interfere with your calls ? dialer , etc ?
hi,
kernel is abyssnote 4.2
rom is rocket rom 23
dont have any apps that would interfere with the calls. all the apps i have installed are generally monitoring apps and some games
Maybe you could help me
I installed Cyanogenmod 10.1 last sunday (version from 13th of july.). The first time I tried to call someone, there was no problem at all. An since then, everytime I try to call, no sound at all, even the ringtone before someone answer. It's the same if somebody try to call me, I answer, I hear nothing even if I activate the speaker. The volume is at the maximum. And after trying to make or receive a call, my smartphone is systematically rebooting...
I know there was some problem like this but after searching on the web, it seems like the most people who got this problem is only with outgoing calls...
Someone got an idea?? :crying:
Many thanks