Wireless Problem - Tilt, TyTN II, MDA Vario III General

I just downloaded the 29-8-11 2.2.2 build on sourceforge and installed with latest .32 kernel.
But wireless not always working. If i restart the phone while wireless trying to open, it starts.
But after closing and trying to reopen it, no luck.
It first starts, tries to search the network and stops with "error"
First time i get an error like this. Tried the patch with aTools 1.3.0 and still nothing
Any suggestions will be appreciated.
And sorry for the bad English.

Good Day
I have the same problem, I cant begin wifi on "Scoot CyanogenMod 7.1.0 RLS3 (Gingerbread 2.3.5) + kernel .32"
Any idea, solution, tips?
Thanks

Related

Wifi unable to start unable to stop tether not working

I searched all over the internet and was unable to find an answer or solution.
I Installed RegawMOD's latest rom.
Wifi was working just fine, The last time i remember that it was working was before used the toolbox and before installing 2 or 3 games. I think that something messed with my wifi driver because when i try to turn it on it says "unable to start wifi", then when i try to turn on airplane mode it says "unable to turn off wifi" When i try to run the Wireless Tether it says that the tethering started with errors that i should check the log. The log says the following from the bottom going up:
Tethering now running DONE
Enabling access control DONE
Enabling IP Forwarding DONE
Enabling NAT rules DONE
Activating wifi Interface FAILED
Configuring WIfi Interface FAILED
loading wlan.ko module FAILED
Does anybody have any useful information that may pertain to my situation?
Everything else is working perfectly. this is the only thing that has ceased to work.
This belongs in Q&A, not Dev.
Thread moved to Q&A.
This is a kernal issue go with darchDroid 2.7, it will fix that problem
did you flash a different kernel? What version of tether?
if you really feel it's the driver, pull the wlan.ko from the original zip and push it into place to overwrite.
I just encountered the same problem as the OP on my HTC Hero CDMA. I rooted my phone with RegawMOD3.0 yesterday and within a few hours my Wifi stopped working. I'm getting "unable to start wifi" and "unable to stop wifi" in airplane mode. The only other thing I did was get the Adblocker app, which i thought may have cause an issue so I did a factory reset on my phone and still no dice. From what I've read it's either the kernel or wifi driver and I'm unsure what one to try and fix first. Any help would be greatly appreciated, thanks in advance.
Kernel version:
2.6.29-ba77cf03
[email protected] #1
Firmeware version:
2.1-update1
Build number:
2.51.591.4 CL343325 release-keys
Well, whatever the issue was it was solved when I put cynogen 7.2 Nightly in. My Wifi is working perfectly now.
Yeah. I'm impressed they're still making nightlies for this phone.

Kainy, problems whit connection

Hi guys, I tried using Kainy, but nothing happens on the phone screen.
After compiling all the necessary for the connection, I select "Connect" but will not connect and the only thing that appears is the following message: "Application Update kainy on your computer." And I do not understand what I do. The application is updated! Can you help me, please?
I have a Nexus S with Android 4.0.3
Matrix Kernel 3.0.17 and Apex 1.0.0 rom

[Q] WiFi Won't Connect GDX028b

Hey, I've got a problem after a fresh install of GDX 028b.
My WiFi simply won't connect. It sees the avaliable networks, but when I try to connect to my router it stucks at connecting, at disconnects, then goes back to scanning, doing this cycle forever.
I have an Alfs v08 and GDX v028b, and I've installed the GingerDX Alfs Kernel AddOn v007 as well.
What can cause this problem?
Things I've already done:
-deteled the remembered networks
-completely wiped everything, reinstalled rom, kernel
There's a kind of fix Swift did with titanium. it worked for me even on v28. You may want to search that.
Sent from me to you
yeah try to read this thread
http://forum.xda-developers.com/showthread.php?t=1605047
its so simple..and work at my phone
Thanks for the reply, but unfortunately this did not work.
Sorry, but I have to bump this.
One last update, I've obviously tried to connect to more networks, some open, some closed, but I still couldn't manage to connect.
vanza said:
One last update, I've obviously tried to connect to more networks, some open, some closed, but I still couldn't manage to connect.
Click to expand...
Click to collapse
I've got my phone like that yesterday...
and Im trying to flash all kernel and ROM
and now the wifi and mobile network is working normally :laugh::laugh:
try this !!
I had the same pribleme before i used this rom
http://forum.xda-developers.com/showthread.php?t=1507021:good:
thanks please :good:
Still cannot connect. Tried out several other roms, all of them are working fine, but not this. However, this is the best rom out there in my opinion. What to do?

[PROBLEM] Kernel Panic and Wifi greyed

A friend of mine asked me to repair his brother's phone that recently showed a "Kernel Panic" error message on 4.1.2 stock rom (followed by reboot). I read on the internet that it could be caused by a hardware failure but someone "fixed" the problem installing an AOSP rom (I know, it doesn't make much sense but it seems to be working for now). I installed cm11 by janice and AOSP Rc3 by J-Team (I can't provide you the links but they should be both in the Developement section for this phone). They both worked smoothly and kernel panic has not showed up (for now) but then, when I got everything working, I noticed I couldn't use the wifi function because the on-off switch is greyed out and unable to work. In the Wifi tab I got this constant message (Searching for Wifi network - translation may be inaccurate). Is there anything I can do to fix this problem via software?
Wifi and Kernel panic
Same problem here.Kernel panic message dont apear evry time.But i have another problem when i tried to swich on wifi it reboot my phone(Galaxy S Advance recently flashed to 4.1.2 stock whit odin).
Did you manage to do something?Btw my bluetooth is working, some peoples encoutered problems whit BT too.

[Q] HP touchpad wifi not turn on Cm11

Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
No any Response:S
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Get the newest Jcsullins CM11 build
hsroomi said:
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
Click to expand...
Click to collapse
gtallmadge said:
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Click to expand...
Click to collapse
Yep thats right, the more info the better when reporting problems and make sure you've got the most up to date rom. Full guides can be found in my signature below.
Get the most updated Jcsullins Rom here cm-11-20150113-SNAPSHOT-jcsullins-tenderloin
I have this same issue, wifi works fine on lollipop, but not on cm11, i originally used tp toolbox to remove webos, resize partitions and flash lollipop. I tried going to cm11 for full functionality and wifi would not work, i tried 3 different cm11 based roms and none worked, i went back to lollipop and wifi worked right away.

Categories

Resources