Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
No any Response:S
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Get the newest Jcsullins CM11 build
hsroomi said:
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
Click to expand...
Click to collapse
gtallmadge said:
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Click to expand...
Click to collapse
Yep thats right, the more info the better when reporting problems and make sure you've got the most up to date rom. Full guides can be found in my signature below.
Get the most updated Jcsullins Rom here cm-11-20150113-SNAPSHOT-jcsullins-tenderloin
I have this same issue, wifi works fine on lollipop, but not on cm11, i originally used tp toolbox to remove webos, resize partitions and flash lollipop. I tried going to cm11 for full functionality and wifi would not work, i tried 3 different cm11 based roms and none worked, i went back to lollipop and wifi worked right away.
Related
After a few days running Dlev's 4.2 ROM, my wifi stopped working suddenly. When I try to turn it on it says error or unable to start wifi. I've exhausted several initial options I began walking myself back through various ROM's back to the original 2.1 stock ROM. Without success I even performed a master clear and several reflashes of the orininal stock ROM, nothing is working. I tried FXR Wifi fix and rescue. Does anybody have any ideas on what I should do?
Thanks,
-Digitalchaos
Kernel?
What kernel were you running with the custom ROM? Talon's being updated really frequently, so if it's Talon, you might try the latest version of that (0.4.4.22, as of this writing)
digitalchaos said:
After a few days running Dlev's 4.2 ROM, my wifi stopped working suddenly. When I try to turn it on it says error or unable to start wifi. I've exhausted several initial options I began walking myself back through various ROM's back to the original 2.1 stock ROM. Without success I even performed a master clear and several reflashes of the orininal stock ROM, nothing is working. I tried FXR Wifi fix and rescue. Does anybody have any ideas on what I should do?
Thanks,
-Digitalchaos
Click to expand...
Click to collapse
Did you try rebooting your router or device that gives you wireless signal? also see if other devices can connect.
It was Talon 0.4.4, but I've gone all the way back to stock ROM/kernel etc and that makes me think that this is a HW malfunction.
AT&T had me reboot the router too, my laptops are able to connect just fine. It's not really a connection problem either, Wifi will not turn on at all.
I called Samsung and they want me to ship them the phone, still debating that one since I will have to go without a phone.
-digitalchaos
Hi folks,
I can't post in the dev section so I'm hoping someone can answer here instead. Searched imilka's thread but couldn't find anything that helped me. Wipe & reflash has worked for others but not me.
Wifi doesn't work for me. It worked when I activated it in the setup wizard after flashing the rom but after the first reboot it doesn't present me with any networks and it doesn't connect to the one I configured. I know the wifi device works because the mac address is identified in the status menu.
Also, battery time isn't very good. Less than half remains after being fully charged then left alone over night.
I have tried a full wipe & re-flash and also flashed the last version released yesterday. Does anyone have any tips or do I just wait for a new version? Seems weird that it works for everyone else.
thezood said:
Hi folks,
I can't post in the dev section so I'm hoping someone can answer here instead. Searched imilka's thread but couldn't find anything that helped me. Wipe & reflash has worked for others but not me.
Wifi doesn't work for me. It worked when I activated it in the setup wizard after flashing the rom but after the first reboot it doesn't present me with any networks and it doesn't connect to the one I configured. I know the wifi device works because the mac address is identified in the status menu.
Also, battery time isn't very good. Less than half remains after being fully charged then left alone over night.
I have tried a full wipe & re-flash and also flashed the last version released yesterday. Does anyone have any tips or do I just wait for a new version? Seems weird that it works for everyone else.
Click to expand...
Click to collapse
Indeed, I didn't come accross any of these problems... I don't know what to say mate, might have something to do from whatever ROM you came from, some kernel remnants...but again, that's just guessing...
What I'd do in a situation like this would be to revert to a stock GB, use jBroid's kernel cleaner, and then try to reflash Chainfire's repack and back to CM. That's just what I'd do...
I'd try to do a factory reset first. That way you'll get another chance to setup your WiFi from scratch and see what transpires. If it fails, it's back to basics, most probably. Rooted GB --> ICS Repack --> CM9.
It's such a hassle to reinstall everything again.
I'm downloading a stock rom now and I'm going to try flashing the modem partition. Perhaps the modem in the chainfire repack I flashed before is not 100% compatible with my phone... Otherwise I'll just have to stick to mobile data.
Flashing modem made no difference so it's something with the ROM. Luckily I have a good data plan so I'll just leave it and see what happens in the versions to come. If anyone has an idea, feel free to let me know.
And thanks for your answers guys.
Suddenly it all works. Thank you Google. You're swell!
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the exact same problem. I went insane scouring the web for hours trying to find a single person with the same problem until I finally gave up. Does anyone know the last version that actually worked?
I also have this problem, do anyone have any idea how to fix this problem?
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had similar problems on cm10.1. I have no idea if this will work (I'm outside the US, and my phone asked me to activate the phone), but I also had no service, no data. I changed my network mode from GLOBAL to GSM/WCDMA auto. Now I have service and data (Data after applying the correct carrier apn settings)
I hope this helps you all
P.S. after this step I made factory resets without the need to do the above step again (You only need to put the correct apn settings again if your on networks other than Verizon)
Hello everyone,
I flashed CM 10.1.2 with build-date 2013 Jul 11 and I can't activate my WiFi anymore.
Bluetooth is ok, but I can't disable NFC - same as WiFi.
I push the button and it's "working" to activate wifi or deactivate nfc - but nothing happens. [edit: nfc working after reboot]
I've got not many ideas what I can do. Everything is working fine with the stock rom v.20a EUR_Open.
Has got someone an idea what I can try?
I did every step on it's own to have a look on which point the problem appears - after installing cm 10.1.2 with cwm recovery.
Bootloader is unlocked.
I'm looking forward to your suggestions and please accept my apologies for my bad english.
Kind Regards
FChaos
For nfc, just restart once, that will fix it
Hey,
im having the same issue with wifi.
When i try to activate the switch gets stuck in grey but it does not activate.
I have it since I installed CM 10.1.2 stable. Before everything worked just fine.
Any solutions for this problem?
Greetz
Wipe cache & dalvik cache
Fix permissions
Reboot
If that doesn't work then full wipe and reflash.
Note: WEP encryption will not work with CM v10.x so make sure you are using WPA on your wireless networks.
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
eliarno said:
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
Click to expand...
Click to collapse
I presume the CM build you refer to is a nightly? Try a different one or CM stable - nightlies are a beta software and may have random bugs.
The problem occurs since I installed the CM 10.1.2 stable.
After that I also tried some of the new CM 10.2 nightlies, but the problem still exists.
Any other ideas?
Edit:
When I install Android 4.1.2 Stock everything works just fine, but the moment I install CM wifi does not work anymore.
Hello Guys,
I have been facing a serious problem ever since I updated my Mi3 to latest developer version. My 3g internet isn't working. I have tried all the possible trouble shooting like reinstalling the OS both stable and developer, clearing cache lot of times, reinserted the sim couple of times. I even tried to flash a lower version but it didn't help.
Initially i was on custom LP with extended partition on TWRP recovery and everything was working flawlessly. I reverted back to stock partition and now using CWM recovery with miui 6 developer version.
On the other hand the wifi works perfectly no issues with it. Not sure whether its a bug or i am missing something.
I would highly appreciate if a solution can be found and i can start using my internet data.
Thanks