Hi,
I'm flashing to I9000XWJM8 (European Rom) and I don't know what CSC I should pick. I saw this list:
CSC_I9000BMCJH2.rar
CSC_I9000DBTJM1.rar
CSC_I9000HUIHUI.rar
CSC_I9000OLBJG4.rar
CSC_I9000OPSJG1.rar
CSC_I9000OXAJM1.rar
CSC_I9000OXEJM1.rar
CSC_I9000OXXJM1.rar
CSC_I9000TMNJM1.rar
CSC_I9000XEEJM1.rar
on you filesharing server (https://www.wuala.com/Samsung Galax...JM7, XWJM8, XWJM9 and BOJI1/?key=AfzUZSU4SpKU)
My current firmware is:
PDA: I9000XWJM2
Phone: I9000XXJM1
CSC: I9000NEEJM1
I am flashing my firmware via Odin and I've chosen the following files:
PDA = CODE_I9000XWJM8.tar.md5
PHONE = MODEM_I9000XXJM4.tar.md5
.PIT = s1_odin_20100512
CSC = ???
I am aiming for the Tayutama Edition for my phone, so any comments on my chosen firmware is much appriciated aswell.
Thanks!
I just read this:
http://forum.xda-developers.com/showthread.php?t=780867&highlight=CSC+choice
Which says that I should pick the "CSC_I9000XEEJM1.rar" one since I am from Denmark and the post states that it is for nordic countries.
So should this be my choice or are there alternatives for nordic countries? If there are, which ones and what is the difference?
Any1 got any comments ??
JohnTheOne, please use the infamous "edit" option for posts, instead of triple posting...
EEJM1 is the same as the one you are using now. It will work fine. Technically you don't even need to flash the csc but do it anyway just to be thorough.
Don't forget to do a factory rest after flashing
Sent from my GT-I9000 using XDA App
Hello all,
I have tried to search regarding this issue but did not get any real clear answer to have to solve the problem.
When I check for new firmware for my Galaxy tab 8.9 (GT-P7300) in Kies it says: your device does not support software upgrading via kies
I have had different firmwares in my tab latest ICS_CM9, but I tried to restore original firmware with Clockwork_Recovery_5.5.0.4
But somehow my backup does not seam to be approved by Kies.
When my tab was brand new I wrote down the info from About and this is the data:
Model Number: GT-P7300
Android Version : 3.1
Baseband Version : P7300XXKHC
Kernel version : 2.6.36.3 [email protected]#1 SHP PREEMPT fri Sep 2 16:00:16 KST 2011
Build number : HMJ37 P7300XWKI1
Also could someone from that data say what country model this Tab is supposed to be, I live in Finland (and its bought here) but I don´t get it to add up ...
Any ideas how to get kies to approve my firmware? Soon ICS will be released by Samsung and I like to test the official version. And to do that I probably need to have kies up and running.
This as I like to do it official way , and not true Odin ...
You need to reflash stock firmware, and remove root if you are rooted. Then kies will work.
Sent from my GT-P7310 using XDA Premium HD app
Riche101UK said:
You need to reflash stock firmware, and remove root if you are rooted. Then kies will work.
Sent from my GT-P7310 using XDA Premium HD app
Click to expand...
Click to collapse
I now tried to reflash stock firmware to something i thing was same version as I had from the beginning (http://hotfile.com/dl/145798475/58cc500/P7300XWKI1.zip.html).
I also removed root rights and put back stock recovery, but now kies don't even see what software version i have on my Tab. current software version is blank.
Any more ideas ?
Install app name check fus, it tell you tab product code.
Download lastest stock rom from sammobile.com by select the match version of rom with your product.
Samsung Kies will upgrade only if you have right version of match firmware and product code.
cheers
Sent from my GT-P7300 using XDA
keijames said:
Install app name check fus, it tell you tab product code.
Download lastest stock rom from sammobile.com by select the match version of rom with your product.
Samsung Kies will upgrade only if you have right version of match firmware and product code.
cheers
Sent from my GT-P7300 using XDA
Click to expand...
Click to collapse
Thanks for this info, learned some more but still no luck as sammobile.com don't seam to have my product codes firmware?
Product code was : GT-P7300UWANEE
Any ides for download place ?
Firstly, Odin is the official way. Samsung service centers use Odin to flash firmware on devices. If official ICS will be released, I'm sure we will get a Odin flashable .tar long before the update will show up in Kies for your Nordic tab. So i don't see the point in worrying about Kies, infact i have never used Kies to update any of my Samsung devices. I just don't trust this crappy software.
If you still want to locate your stock rom then send me a PM, i believe i can help you.
Hi all,
I have just bought me a galaxy note with 2.3.6 firmware,
And i wonder what does the PDA and CSC mean in the firmware upgrade to ICS?
http://forum.xda-developers.com/showthread.php?t=1424997
I don't really understand which firmware to choose...
I want to choose 4.0.4 but dont know which one.
I am currently using :
model number GT-N7000
android version: 2.3.6-mobile-star
baseband version: N7000XXLPT
Kernel: 2.6.35.7-N7000XXLA4CL886827
Build: GINGERBREAD.XXLA6
What is my PDA?
What is my CSC?
What is PAD?
What is CSC?
Which firmware can i choose?
What is the difference between all the firmwares?
Thanks in advance
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
I see
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
backup your efs first http://forum.xda-developers.com/showthread.php?t=1606012
you need root for that you can get that by following dr ketans guide in sticky section developement.
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
Click to expand...
Click to collapse
you can update to any rom any time, just follow dr ketans thread and follow pc odin route
Updating throught Kies/ota is tricky, you need pcode sometimes of the country rom you want to go to, no root, and csc of that countries rom, and a whole stock rom installed for that csc. Best to just always follow pc odin route lol
also read stickies and threads fully cause a lot messed up by not doing that. One tip on ics do not wipe/factory reset
happy reading and searching
Sent from my GT-N7000 using Tapatalk 2
how to install CWM application for N7000XXLRK
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
lol csc thats important, 3 letter code by dialing *#06# to get emei,
then dial *#272*emeihere*
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
Click to expand...
Click to collapse
Find rooting guide from my signature n get cf rot kernel
Ps: cf root kernwl for lrk not available, use lrg instead of that.
Or use custom kernel like speedmod
Sent from my GT-N7000 using xda premium
CWM and battery
I have rooted the N7000XXLRK successfully.
You mean that i can not install CWM application on that firmware?
So how do i backup the whole phone without CWM?
And another question:
i want to see the battery percentage on the upper bar and not only the battery icon indication, how do i do that? is that possible?
Thanks,
best, not to use cwm on a kernel that can trigger the emmc brickbug, best to use kernel like speedmod k3-11 or likewise which has the trigger for emmc brickbug disabled when doing anything in cwm, or in ics.
Dont wipe, factory reset, change csc, or delete large files on a stock ics kernel
to eliminate these issues read threads/first posts of kernel threads btw.
tip: use kernels based on tw, or stock for stock ics, kernels based on cm9 or other are not for stock..
tip2: when nandroid backup, and wanting to recover that, you need same kernel installed as when backup was made. So use a safe kernel
tip3 when recovering apps and data on different roms, issues can arise due to different database structures, which is why its not really supported on i.e. cm9
tip 4 Some roms are wipe some are not. when going to and from gb and ics stuff could linger, which could cause softbricks. There are clean ways to go to and from, enought threads on that's but always do it on safe kernel whatever wipe action
Sent from my GT-N7000 using Tapatalk 2
phone does not support upgrade via kies
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
i am on the latest ICS stock rom (INU), the CSC shows XXX, when i connect the device to kies
i have tried the *#272*IMEI#
and changed it to INU, the device got full wipe once this happened , still i get the same CSC-XXX
and the same - phone does not support upgrade via kies
plz help
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i installed the new firmware INU using the pc odin
note is unrooted no apps are installed
i hav no backup of any of the stock firmware n efs ..
.. ll that - "Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab"
work. i need to try it nw ! !
nokiamodeln91 said:
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
Click to expand...
Click to collapse
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
ShreyasRewagad said:
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
Click to expand...
Click to collapse
yeah u r right... my bad.. use mobile odin
nokiamodeln91 said:
yeah u r right... my bad.. use mobile odin
Click to expand...
Click to collapse
this wayzz not workin.. it requires root.. my note is unrooted.. plz temme sum other way..
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
Click to expand...
Click to collapse
Thanks for the explanation, but what do the letters PDA actually stand for?
(And please don't say "Personal Digital Assistant," because that's all I can find and I've been searching all day.) :fingers-crossed:
I'm sure it must mean something else when it is being used in a discussion of Android mobile phone software.
Does anyone know what "PDA" actually stands for, what are the actual words represented by that abbreviation?
Thanks in advance for your help.
CSC and Google Play App
I've tried a lot of ROMs. Some ROM makes impossible to install applis from Google Play Store. For example when using the Sweet V5 ROM, I cannot get Firefox nor Chrome from the market. It says my Galaxy Note is incompatible. Do you have any idea of CSC management ?
please help me
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
dr. ketan sir, i have some problem to understand PDA and CSC defenition and i also have some problem about unrooting my note 2
my note 2 build number is N7100UBDMA1 and i want to unroot my device.
my question is, i see your answer above that i can use any ROM for any country as long as my device is unlocked ? so can i use indonesia firmware to unroot my device ? because i bought this device at china and now i'm living in indonesia
thank you so much for your attention sir
Hi
i would like to get the file for a specific stock ICS for my Note
the ones on here and elsewhere on samfirmware are not this specific number etc
this is the one that i am looking for - i think its german as my phone came back my the german repair center - all seems well so far but i would like a backup file for this version -
Baseband Version - N7000XXLPT
Kernal Version - 3.0.15 - N7000XXLPY-CL474507
Build number - IML74K.XXLPY
many thanks
Find on first link on my signature. It is not same? very first on ics rom listing there.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find on first link on my signature. It is not same? very first on ics rom listing there.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks Dr
it seems that the numbers are for a slightly different version
N7000XXLPY---4.0.3/12.05---N7000OXALPY---Download---Open Germany
i had problems for months and months and finally my note had not crashed for over a week
i would like to root it soon but would like my version as a lifesaver should i need to revert back
would like the version i specifically named...
This shud be same b'coz baseband number is not mentioned in that list
first is ROM version (PDA) second is CSC
You can check your CSC by *#1234#, if it same as mentioned on ROM listing(N7000OXALPY), then it is same, which you are looking for.
dr.ketan said:
This shud be same b'coz baseband number is not mentioned in that list
first is ROM version (PDA) second is CSC
You can check your CSC by *#1234#, if it same as mentioned on ROM listing(N7000OXALPY), then it is same, which you are looking for.
Click to expand...
Click to collapse
i just did the *#1234# check (which i did not know about) and indeed i have the (N70000XALPY version )
was confused with all the numbers etc
thank you kindly
hello everyone,
i bought tab s2 sm-t813 but its already rooted. i want to unroot it. problem is i am not able to find the same firmware. i find out that region is Germany DBT through smart switch but PDA and CSC are different from firmware available for download.
My PDA is T813XXE0APC8 i searched everywhere but unable to find the same, which stock firmware i can use instead of above mention PDA. i have downloaded the firmware according to region which is DBT-T813XXU1APG2
can i use this one.
Secondly when i check through Droid Info it shows me some weird build number. Below is what its exactly shows
Model = SM-T813 (gts210vewifixx)
Baseband = Not available
Build number = gts210vewifixx-eng 6.0.1 MMB29M T813XXE0APC8 test-keys
i don't understand which firmware is installed in this tab. can anyone tell me?
Thanks in advance....
Regards,
sirgroh said:
hello everyone,
i bought tab s2 sm-t813 but its already rooted. i want to unroot it. problem is i am not able to find the same firmware. i find out that region is Germany DBT through smart switch but PDA and CSC are different from firmware available for download.
My PDA is T813XXE0APC8 i searched everywhere but unable to find the same, which stock firmware i can use instead of above mention PDA. i have downloaded the firmware according to region which is DBT-T813XXU1APG2
can i use this one.
Secondly when i check through Droid Info it shows me some weird build number. Below is what its exactly shows
Model = SM-T813 (gts210vewifixx)
Baseband = Not available
Build number = gts210vewifixx-eng 6.0.1 MMB29M T813XXE0APC8 test-keys
i don't understand which firmware is installed in this tab. can anyone tell me?
Thanks in advance....
Regards,
Click to expand...
Click to collapse
You don't need to install the exact build. Updates are posted regularly which changes the build number. As long as it's for your region just flash.
The one above is correct.
ashyx said:
You don't need to install the exact build. Updates are posted regularly which changes the build number. As long as it's for your region just flash.
The one above is correct.
Click to expand...
Click to collapse
thanks mate done it successfully. no problem at all.