Database Develop

Stable Combinations with V20L stock gb (Kernerls, packs, patch fixes, etc)

I wanna to open this thread to share experiences about V20L in combination with mod kernerls, packs, fixes, etc ... in order to know compatibilities and progresses with STOCK GB V20L.
These are my experiences with v20l;
SPICA KERNEl sr1: So good so far, I see some lags on slow scrolling, everything else work good (WIFI, GPS (not as fast as topos room))
NEOBLAZE KERNEL: The most stable kernel Ive prove with v20l. (not as fast as spica)
SPICA KERNEL RC8: Fas...t pretty fast, good memory manage but I also notice some slow scrolling issues.
SPICA HP PERFORMACE PACK: Almost necessary if you decide to go with spica's kernerls.
STOCK KERNEL: Not bad at all, but the others are just better
I Cannot test complete cycles with battery life, but seems to be pretty close to stock froyo
And you people?, what can you share? spica, neoblaze or stock, ext3 or ext4, battery life?

I'm running V20L plus horse power sr1 for a few days now, but you are right with a few lags from time to time. So I'll go back to topogigi 2 SP3 today. This combination is still the best for me at the moment. Snappy, fast and stable

I'm running V20L stock odexed with HP RC8 Kernel + HP Kernel Performance Pack.
This combination is really great!

i think for right now spica is the best choice, especially his performance pack it's nice one eventhough it's ext2

SPICA RULESSSS with topo sp3

I have tried most of these combinations.
The stock-stock is very stable, only downside that it cannot be overclocked.
BTW were can I find the stock kernel by it self?

Flix123 said:
I'm running V20L stock odexed with HP RC8 Kernel + HP Kernel Performance Pack.
This combination is really great!
Click to expand...
Click to collapse
whick pack are you using?

I'm running SR2 Kernel and Performance Pack V6 (first V2, then flashed V6).
It's really good!

[Q] searching a simple OC Kernel

Hi,
I'm curently searching for a stock GB V20l Kernel (2.6.32.9) with only overcloking ability.
Thanks

You can try Spica's HP kernel, it's stable and has pretty good battery life. OC can be up to 1.55ghz, but I recommend no more than 1.2 for daily usage

want it too. the very first kernels had just CPU OC, but now all overclock gpu, ram, etc. but my device can't deal with memory OC

up!
10 characters

Why up? The answer has been given. Horse power kernel is a good kernel, choose SR2 version.
No kernel overclocks gpu, and ram hack exists only in some CM7 kernels.

For me sr2 works great.
Sent from my LG-P990 using XDA App

Best Kernel for CM7 Nightlies

Guys,
What's the best Kernels for this rom - CyanogenMod-7 for Optimus 2X - NIGHLTIES
Would like something stable and would push to 1.5 (currently stuck at 1000 standard)
Ta

The best kernel I would recommend is ETaNa Kernel (link in signature), because it's really stable for CM, and you can tweak it a lot with spicas On The Fly pack. Also the battery life is awesome with it. Only, ETaNa Kernel doesn't OC to 1.5Ghz. The HOC version OC's to 1.4Ghz and the LOC version OC's to 1.2Ghz. However the difference between 1.5Ghz and 1.4Ghz isn't noticeable. It doesn't make the phone smoother, it only consumes more battery.
But if you want to OC to 1.5Ghz so badly then I recommend Ironkernel for Gingerbread, you can find it in the dev section.

SP1996AC said:
The best kernel I would recommend is ETaNa Kernel (link in signature), because it's really stable for CM, and you can tweak it a lot with spicas On The Fly pack. Also the battery life is awesome with it. Only, ETaNa Kernel doesn't OC to 1.5Ghz. The HOC version OC's to 1.4Ghz and the LOC version OC's to 1.2Ghz. However the difference between 1.5Ghz and 1.4Ghz isn't noticeable. It doesn't make the phone smoother, it only consumes more battery.
But if you want to OC to 1.5Ghz so badly then I recommend Ironkernel for Gingerbread, you can find it in the dev section.
Click to expand...
Click to collapse
Hi,
1.2 - 1.4 would be fine also.
I will give it a go!
Downloading this one
1203050915-ETaNa_HOC_DS_OTF_96M.zip 05-Mar-2012 09:15 4.3M
Seems to be the latest.

choccy31 said:
Hi,
1.2 - 1.4 would be fine also.
I will give it a go!
Downloading this one
1203050915-ETaNa_HOC_DS_OTF_96M.zip 05-Mar-2012 09:15 4.3M
Seems to be the latest.
Click to expand...
Click to collapse
It is the latest, but are you sure you want a 96MB Ramhack? You are aware of the fact that some things might not work right? All in all I just think that 96MB is just a little too big. 48MB should be sufficient in my opinion...

Hi,
Yeah it's not installing, stuck on boot screen ;-(
Will try different one.
Thanks

SP1996AC said:
It is the latest, but are you sure you want a 96MB Ramhack? You are aware of the fact that some things might not work right? All in all I just think that 96MB is just a little too big. 48MB should be sufficient in my opinion...
Click to expand...
Click to collapse
Ignore,
Took ages to boot but seems to have worked now.
Fingers crossed all ok on 48MB hoc

Hi guys, i'm currently using Etana, the last release LOC with 0 ramhacked!
Drain battery isn't to high and it's very very smooth ^_*
+1 for Vadonka

I can also suggest the latest Etana kernel. Works fine.

FlynDual said:
Hi guys, i'm currently using Etana, the last release LOC with 0 ramhacked!
Drain battery isn't to high and it's very very smooth ^_*
+1 for Vadonka
Click to expand...
Click to collapse
I have installed too. Used it long and works great.
Sent from my LG-P990 using xda premium

ETaNa kernel from Vadonka is amazing
http://forum.xda-developers.com/showthread.php?t=1427646

Good Combination?

I want to get a good performance and a good battery life (if i can ). I want to install Temasek UNOFFICIAL BUILD 134 ROM and Symbiosis kernel 1.1.2! What do you think about this? or have better ideas? Tell me Please! Thank You!

Go ahead, it's a very good combo. Very stable. Great performance and battery life. Just remember that if you change cpu settings this might change(for better or worse).
Sent from O2X via xda premium, beware of autocorrection

Yep, I'm with Temasek 134 + symbi0sis 1.1.2 for now 2 weeks and I didn't have any problems.
I'm also running my O2x with:
1100Mhz Overclock
32Mb Ramhack
ZRam with Swappiness:100 and Virtual Memory Size: 256Mb
You can make that setting via GuesteOC app when flashing symbi0sis kernel.
Everything is working like a charm :good:

Try Gueste2X with baseband 218, It includes ramhack

[KERNEL][CM10] CM10 kernel for ICS bootloader (RAM hack,OC)

This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez

Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz

Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.

i tested..............

Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler

Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!

angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)

thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time

included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one

First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.

I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.

Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.

rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test

Can you put in the next update some more CPU governers and I/O scheduler?

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium

lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!

Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.

Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2

rugglez,
Please add pulse boost and hotplug governor. Thanks.