hey guys i just thought u might be able to help me. i tried installing android 4.0.3 on my x8 and it turned off and now keeps getting stuck on the black screen with white "sony ericsson" on it. i have tried a hard reset but the hard reset screen wont come up but the green light flashes when i try. plz can some one help me, i need my phone and cant afford a new 1
et1990 said:
hey guys i just thought u might be able to help me. i tried installing android 4.0.3 on my x8 and it turned off and now keeps getting stuck on the black screen with white "sony ericsson" on it. i have tried a hard reset but the hard reset screen wont come up but the green light flashes when i try. plz can some one help me, i need my phone and cant afford a new 1
Click to expand...
Click to collapse
repair phone with SEUS http://sony-ericsson-update-service.en.uptodown.com/
or http://forum.xda-developers.com/showthread.php?t=1011071
when getting sony ericsson logo try pressing back button a few times so you will get into Xrecovery/CWM mode. from there you can flash any ROM you want with the condition of having it on your SD card.
kirmada said:
repair phone with SEUS http://sony-ericsson-update-service.en.uptodown.com/
or http://forum.xda-developers.com/showthread.php?t=1011071
Click to expand...
Click to collapse
worked a treat, thanks alot, i well like my x8 (dunno why, iv had more problems with that than i ever had with anything). but it workin again, thanks again
Sherman143 said:
worked a treat, thanks alot, i well like my x8 (dunno why, iv had more problems with that than i ever had with anything). but it workin again, thanks again
Click to expand...
Click to collapse
ur welcome, glad it worked
loved my x8 but hate andriod so gt a hd mini now, cond the pilok at shop to give me a refund lmao. well how was he to know i rooted it haha
Use PCC
I had flashed an incompatible ROM on my device , and I had the same problem (I dont remember the name of the ROM)
I used PCC. It worked for me. I didnt need SEUS.
Prefer PCC
Thanks!
Thank you so much!
SEUS is da best.
Run out of ideas
Hello, I have the same problem, and already tryed the three options posted on this thread.
tryed to install a miniCM7, and now the phone get stucked in the screen "Sony Ericsson" My phone es a e15a (im in argentina)
1) SEUS -> Message: There is no software available for your phone, your phone already has the most resent software
2) PC Companion -> Message: There is no software available for your phone. Try again later
3) FlashTool -> Message:
25/003/2012 16:03:26 - INFO - Device disconnected
25/003/2012 16:03:34 - INFO - Selected X8a_2.1.1.A.0.6_Baseband_015.ftf
25/003/2012 16:03:34 - INFO - Preparing files for flashing
25/003/2012 16:03:34 - INFO - Please connect your device into flashmode.
25/003/2012 16:03:46 - INFO - Device connected in flash mode
25/003/2012 16:03:47 - INFO - Opening device for R/W
25/003/2012 16:03:47 - INFO - Reading device information
25/003/2012 16:03:47 - INFO - Phone reading for flashing.
25/003/2012 16:03:47 - INFO - Start Flashing
25/003/2012 16:03:47 - INFO - Flashing loader
25/003/2012 16:03:48 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
25/003/2012 16:03:48 - INFO - Flashing amss_fs.sin
25/003/2012 16:03:49 - INFO - Flashing cache.sin
25/003/2012 16:03:49 - INFO - Flashing fota1.sin
25/003/2012 16:03:50 - INFO - Flashing kernel.sin
25/003/2012 16:03:54 - INFO - Flashing amss.sin
25/004/2012 16:04:06 - INFO - Flashing fota0.sin
25/004/2012 16:04:06 - INFO - Flashing finished.
25/004/2012 16:04:06 - INFO - Please wait. Phone will reboot
25/004/2012 16:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
25/004/2012 16:04:07 - INFO - Device connected in flash mode
25/004/2012 16:04:08 - INFO - Device disconnected
25/004/2012 16:04:10 - INFO - Device connected in flash mode
25/004/2012 16:04:33 - INFO - Device disconnected
25/004/2012 16:04:36 - INFO - Device connected with USB debugging off
25/004/2012 16:04:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
So.... Im despered!! any other ideas?
nahueltaibo said:
Hello, I have the same problem, and already tryed the three options posted on this thread.
3) FlashTool -> Message:
25/003/2012 16:03:34 - INFO - Selected X8a_2.1.1.A.0.6_Baseband_015.ftf
25/003/2012 16:03:48 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
So.... Im despered!! any other ideas?
Click to expand...
Click to collapse
You want to flash the baseband on LOCKED boot loader?
That will never work.
Since it seems your boot loader is still locked you only need to flash the Stock ROM.
EDIT: By the way, that's also the root of your problem.
MiniCM7 requires you to...
- Unlock the boot loader (ONLY if your phone is SAFE for doing so!!!)
- Flash nAa's kernel
- Flash MiniCM7
But then, why the hell do I repeat again what's actually written in the OP post of MiniCM7 and you failed to read?
Related
Dear,
I've tried almost everything, sry
The problem is simple.
I've an X8 with stock (FW 2.1-update1, Kernel 2.6.29 and Build 2.1.1.A.0.6) and I'm trying to put it on ICS with MiniCM9.
The first thing I did was Root with SuperOneClick. Don!
Second was turn off the phone and install Flashtool and Flashtool drivers also.
Third, I tried to turn the phone into Flash mode and... the phone do not stay in "flash mode". After some seconds the phone reboot and enter in a orange light, instead of the green one.
Follow below the log of Flashtool:
Code:
20/032/2012 23:32:15 - INFO - <- This level is successfully initialized
20/032/2012 23:32:15 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
20/032/2012 23:32:15 - INFO - You can drag and drop ftf files here to start flashing them
20/032/2012 23:32:20 - INFO - Device disconnected
20/032/2012 23:32:33 - INFO - Selected E15_nAa-ics-02_2.6.29.6-nAa-ics-02.ftf
20/032/2012 23:32:33 - INFO - Preparing files for flashing
20/032/2012 23:32:33 - INFO - Please connect your device into flashmode.
20/032/2012 23:32:41 - INFO - Device connected in flash mode
20/032/2012 23:32:42 - INFO - Opening device for R/W
20/032/2012 23:32:42 - INFO - Start Flashing
20/032/2012 23:32:42 - INFO - Flashing loader
20/032/2012 23:32:42 - INFO - Ending flash session
20/032/2012 23:32:42 - ERROR -
20/032/2012 23:32:42 - ERROR - Error flashing. Aborted
20/032/2012 23:32:42 - INFO - Device connected in flash mode
20/033/2012 23:33:01 - INFO - Device disconnected
20/033/2012 23:33:06 - INFO - Device connected with USB debugging off
20/033/2012 23:33:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
Code:
20/033/2012 23:33:24 - INFO - Selected E15_nAa-ics-02_2.6.29.6-nAa-ics-02.ftf
20/033/2012 23:33:24 - INFO - Preparing files for flashing
20/033/2012 23:33:24 - INFO - Please connect your device into flashmode.
20/033/2012 23:33:31 - INFO - Device disconnected
20/033/2012 23:33:41 - INFO - Device connected in flash mode
20/033/2012 23:33:41 - INFO - Opening device for R/W
20/033/2012 23:33:41 - INFO - Reading device information
20/033/2012 23:33:41 - INFO - Phone ready for flashmode operations.
20/033/2012 23:33:41 - INFO - Start Flashing
20/033/2012 23:33:41 - INFO - Flashing loader
20/033/2012 23:33:42 - INFO - Ending flash session
20/033/2012 23:33:42 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
20/033/2012 23:33:42 - ERROR - Error flashing. Aborted
20/033/2012 23:33:42 - INFO - Device connected in flash mode
20/033/2012 23:33:43 - INFO - Device disconnected
20/033/2012 23:33:45 - INFO - Device connected in flash mode
20/034/2012 23:34:04 - INFO - Device disconnected
20/034/2012 23:34:06 - INFO - Device connected with USB debugging off
20/034/2012 23:34:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
It's not stablishing the Flash mode state.
I'm folowing this video: http://www.youtube.com/watch?v=sWqPnzhYnmQ
Follow this link..And flash your phone..
http://mkasharingiscaring.blogspot.in/2011/11/guide-how-to-unbrick-xperia-x8-d.html
If i helped you pls press thanks button..
http://forum.xda-developers.com/showthread.php?p=25955449#post25955449
turn on usb debugging. go to settings then to applications, development and touch where it says USB debugging
usb debug are on
i've install superuser first and then i've tried to install the new kernel.
the problem is "stay in flash mode"
the point is: when i put the device in flash mode, it stays for 5 seconds or less and reboot
I was having the same problem
http://forum.xda-developers.com/showthread.php?t=1663775
I made two mistakes, i didn't reboot my pc after installing flashtool and my antivirus was activated. After having rebooting my pc and disabling my antivirus, the flashmode was working.
Julianocas said:
usb debug are on
i've install superuser first and then i've tried to install the new kernel.
the problem is "stay in flash mode"
the point is: when i put the device in flash mode, it stays for 5 seconds or less and reboot
Click to expand...
Click to collapse
Ok, I will ask only once. Did You unlock Your bootloader?
Bolussimo said:
Ok, I will ask only once. Did You unlock Your bootloader?
Click to expand...
Click to collapse
Damm tutorials, lol
Ok, all done. Thank you, I did it with "msm7227_semc.cmd" and checked with "S1Tool" with the "r" or "R" check.
Regards.
same problem of ERROR - ERR_SEVERITY="MAJOR"ERR_CLASS="SECURITY_CLASS"ERR_ DYNAMIC="SI
Julianocas said:
Damm tutorials, lol
Ok, all done. Thank you, I did it with "msm7227_semc.cmd" and checked with "S1Tool" with the "r" or "R" check.
Regards.
Click to expand...
Click to collapse
Hi Juliano i´m from Brasil too, but i don´t know if i can speak portuguese in the forum. But anyway i was having a problem more or less like yours, the problem was not really the light in the flashtool, but with the error when i tried to flash any kernel, the message is equal that you post in your log: ERROR - ERR_SEVERITY="MAJOR"ERR_CLASS="SECURITY_CLASS"ERR_DYNAMIC="SIN header verification failed".
When you run the smc 7727 did you not have any error?Because when i run i have another error, where says that is not possible to gains acess route, but how? if the cel is rooted and the usb debuug was on too?
felpsi said:
Hi Juliano i´m from Brasil too, but i don´t know if i can speak portuguese in the forum. But anyway i was having a problem more or less like yours, the problem was not really the light in the flashtool, but with the error when i tried to flash any kernel, the message is equal that you post in your log: ERROR - ERR_SEVERITY="MAJOR"ERR_CLASS="SECURITY_CLASS"ERR_DYNAMIC="SIN header verification failed".
When you run the smc 7727 did you not have any error?Because when i run i have another error, where says that is not possible to gains acess route, but how? if the cel is rooted and the usb debuug was on too?
Click to expand...
Click to collapse
Disable antivirus, and run again with admin privileges
Sent from my E15i using xda premium
You need to unlock your bootloader then for example flash the nAa ics kernel via flashtool and install ROM via CWM.
Cheers,
Mistev
I am having the same error Rooted, installed CWM 5, and AFAIK bootloader unlocked:
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1232-9897_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511LXAGN
SEMC SIMLOCK CERTIFICATE
Elapsed:14 secs.
Click to expand...
Click to collapse
But as soon as I try to flash the kernel for Miui, FXP 133, I get the error. Really annoying cause I can't install Miui this way Anyone here have an idea? I have rebooted with AV shut down and then started FlashTool as admin but still no result.
_JT said:
I am having the same error Rooted, installed CWM 5, and AFAIK bootloader unlocked:
But as soon as I try to flash the kernel for Miui, FXP 133, I get the error. Really annoying cause I can't install Miui this way Anyone here have an idea? I have rebooted with AV shut down and then started FlashTool as admin but still no result.
Click to expand...
Click to collapse
If you look at the log you will see that your BL is still locked.
fifo171 said:
If you look at the log you will see that your BL is still locked.
Click to expand...
Click to collapse
Ok, guess I misinterpreted then. How can I see it? Can I also see in this log of my X10 can be unlocked with flashtool? Or do I need another method for this?
on the debugging :good:
hi frds im nw in xda world n also in customrom world so i wnt to hlp n sry frds 4 my bad englis but pls hlp..
somdy ago install minicm6 on my x8 its nice but some bug like memorycard corrut n chking for errors so i desire to go with another rom but searching here i found that many roms n many installion method so i confused, i confused on'
1) which rom have need unlockbootloader for install n which rom install without unlocking bootloader..
2)can't i use rom without unlock bootloader..
im also trying for unlock bootloader from 2 days but im not success in that process, i carefully read topic on bootloader unlock in xda but im nt success so i wrote my problem here so plss hlp me frds n pls tell me solution in detail pls..
my phone is x8, 10w51 n now its running on minicm6, i do every work explain in this link "http://forum.xda-developers.com/showthread.php?t=1549696" i process with s1 tool n its show "SEMC SIMLOCK CERTIFICATE" but its so "R8A029" means my bootloader is locked so i go step for "msm7227_semc.cmd" n then its show,
"ADB server didn't ACK
failed to start
error:cannot connect to daemon"-
i tried many times but evrytime its show that n idnt understand whts this then i go for flashtool as suggested in above link but its not worked for me i do everystep carefully but the output shows
"08/034/2012 13:34:57 - INFO - <- This level is successfully initialized
08/034/2012 13:34:58 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
08/034/2012 13:34:58 - INFO - You can drag and drop ftf files here to start flashing them
08/035/2012 13:35:06 - INFO - Device connected with USB debugging off
08/035/2012 13:35:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
08/039/2012 13:39:04 - INFO - Selected X10_V1_BLRelock.ftf
08/039/2012 13:39:04 - INFO - Preparing files for flashing
08/039/2012 13:39:04 - INFO - Please connect your device into flashmode.
08/039/2012 13:39:07 - INFO - Device disconnected
08/039/2012 13:39:40 - INFO - Device connected in flash mode
08/039/2012 13:39:40 - INFO - Opening device for R/W
08/039/2012 13:39:40 - INFO - Reading device information
08/039/2012 13:39:40 - INFO - Phone ready for flashmode operations.
08/039/2012 13:39:40 - INFO - Start Flashing
08/039/2012 13:39:40 - INFO - Flashing loader
08/039/2012 13:39:41 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
08/039/2012 13:39:41 - ERROR - Error flashing. Aborted
08/039/2012 13:39:41 - INFO - Device connected in flash mode
08/039/2012 13:39:42 - INFO - Device disconnected
08/039/2012 13:39:44 - INFO - Device connected in flash mode
08/039/2012 13:39:59 - INFO - Device disconnected"
now what i do for unlock boot loader pls solution of my problem pls frds explain in detail pls
i tried very much but i cant find any solution so i make a thread so hlp me frd
make sure all the adb.exe in processes tab of task manager are killed. then try again. and for flashtool, you selected the X10 bl unlock firmware; our device is the X8.
sgt. meow said:
make sure all the adb.exe in processes tab of task manager are killed. then try again. and for flashtool, you selected the X10 bl unlock firmware; our device is the X8.
Click to expand...
Click to collapse
yes i chek it evrytime n kill the adb.exe but it not work n in flashtool how i select x8 is already only one showing x10 so wht i do pls frd explain all process in detail i confused vry much so plss
You need stock rom 2.1 eclair for unlocking and not minicm6,flash stock rom and try again
If you don't want to unlock bootloader you can use custom roms that are for stock kernel.
Sent from my X8 using xda premium
oh yeah stamatis16 is right. you can unlock only on stock and if you are lucky maybe on gdx 13 but stock is the safer pick of the two.
Hi, Could you help me please, I was using FlashTool, and after I Connect phone X8 in flashmode, it got stuckt and then I unplug phone from PC, And It wont start now, and cant connect even in flashmode from Flashtool, and PC companion cant find it,
Can It be solved some way, please?
There is a last report from FlashTool:
24/033/2013 20:33:27 - INFO - Reading device information
24/034/2013 20:34:11 - INFO - Unable to read from phone after having opened it.
24/034/2013 20:34:11 - INFO - trying to continue anyway
24/034/2013 20:34:11 - INFO - Start Flashing
24/034/2013 20:34:11 - INFO - Processing loader
24/034/2013 20:34:11 - INFO - Checking header
24/034/2013 20:34:11 - INFO - Ending flash session
24/034/2013 20:34:11 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
24/034/2013 20:34:11 - ERROR - Error flashing. Aborted
24/034/2013 20:34:11 - INFO - Device disconnected
24/034/2013 20:34:17 - INFO - Selected X10_V1_BLRelock.ftf
24/034/2013 20:34:17 - INFO - Preparing files for flashing
24/034/2013 20:34:17 - INFO - Please connect your device into flashmode.
24/034/2013 20:34:44 - INFO - Flash canceled
Thanks
Why are you trying to flash x10 kernel on x8?
ouch, damn, I did not notice that.
That is Very Good ....
Is there anything to do with that?
You must install on your pc Gordon's gate flash driver and after reebot your pc.Then pcc and flashtool will recognize it.
nope Gordon's gate flash driver do not work either.
Everything was working fine, until I accidently flashed X10 kernel.
Now, It not even react when I connect phone to PC.
I am worried that X10 kernel had sets some higger voltages , or something else what ruined some hardware.
does the phone not turn on or it just stays at se logo? If the phone wont turn on you have a dead boot and this must be repaired using Jtag.
TomyOne said:
nope Gordon's gate flash driver do not work either.
Everything was working fine, until I accidently flashed X10 kernel.
Now, It not even react when I connect phone to PC.
I am worried that X10 kernel had sets some higger voltages , or something else what ruined some hardware.
Click to expand...
Click to collapse
nope. i have flashed X10 kernels sometimes.. it does nothing. a simple reflash works. if it does not detect them i reboot pc or reinstall drivers
Phone do not turn on.
I tried restarting PC, and reinstaling drivers, but I think that shoud not be problem, when I worked before.
Hello,
I would like to ask about possibility of bootlader unlock on my phone.
http://forum.xda-developers.com/showthread.php?t=1254225
I want instal on my phone GingerDX
http://forum.xda-developers.com/showthread.php?t=1188486
I just get my phone X8 from repair service, where they repair it with JTAG and load new original ROM (Firmware).
And If I indentify phone in S1Tool I get NOT RECOGNIZED SIMLOCK certificate.
But before repair SIMLOCK was recognized. And manufactured date on phone is 11W11.
Can I proceed with Bootunlock ? Or is there anything to do to get again simlock certificate recognized?
There is a screen from S1Tool
http://img15.imageshack.us/img15/2133/simlockcertificate.jpg
Thanks
On 11w11 u can try
----------------------------------------------------------
"Life is nothing without freedom!"
Oumn, good, it is dead again.
hello guys . i have a xperia x8 e15i and i tried to install a custom rom. so it all went like this.
First i downlaoded gingerdx v.31 then rooted my phone,installed busybox,installed xrecovery,put gingerdx in my sd card,booted my phone into xrecovery made a backup of my rom cleared my cache installed gingerdx and hit reboot.
now my phone just stays on the SE logo and cant get into xrecovery. every time i put in the battery it just keeps on going into the SE logo and doesnt do anything.
I was thinking maybe i forgot to unlock bootloader but i cant really fix that now. all im thinking is how to get it back.
any suggestions ?
It's just a soft brick. You can repair it using pcc or simply flash stock rom via flashtool.
It's a soft brick. I have encountered it aswell. If you have PC companion you can install the Stock Eclair 2.1 back or flash it via Flashtool
banny.dude said:
It's a soft brick. I have encountered it aswell. If you have PC companion you can install the Stock Eclair 2.1 back or flash it via Flashtool
Click to expand...
Click to collapse
thanks but i have tried to do it with pc companoin which wont let me cause it tells me to turn my phone on which i cant and when i try flash it with flash tool i cant find the right firmware :I
No dude. Just click on the support zone and some option will say Repair device or Upgrade software( I am not sure .. cant remember , you'll find it ) after that it will Download the Eclair 2.1 automatically and when it is downloaded it will ask you to hold some button and while holding that button ( I think its the back button ) connect the usb cable to your phone! your phone will show a green light and after that leave the job on the PC companion
solution
@dansei12
Nothing to worry, its just a soft brick , easy to fix.
You just need SONY PC COMPANION and your device with data cable.
Follow the steps in screenshot.
After the third step just follow instruction [SONY will show you the way ] .. and it will be done.
NOTE:- You will return back to stock without SU. !
Just a soft brick..
experienced the exat issue..
just use Sony Update service.. .
easiest to remove your soft brick!
Flashtool Failure
Hey guys , thanks to everybody who has replied already but i have been very short in time lately.
So a few days ago ive managed to get flashtool and tried to flash it with the x10 v1 BLRelock.
Sadly i get an error.
Heres how it goes :
11/036/2013 17:36:44 - INFO - <- This level is successfully initialized
11/036/2013 17:36:44 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
11/036/2013 17:36:50 - INFO - Selected X10 / V1 / BLRelock
11/036/2013 17:36:50 - INFO - Preparing files for flashing
11/036/2013 17:36:50 - INFO - Please connect your device into flashmode.
11/036/2013 17:36:51 - INFO - Device connected with USB debugging on
11/036/2013 17:36:51 - INFO - Connected device : SonyEricson X8
11/036/2013 17:36:52 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-02-05 18:40 +0100) multi-call binary.
11/036/2013 17:36:52 - INFO - Android version : 4.0.4 / kernel version : 3.0.36-android-bst+ / Build number : IMM76L
11/036/2013 17:36:54 - INFO - Device disconnected
11/037/2013 17:37:09 - INFO - Device connected in flash mode
11/037/2013 17:37:10 - INFO - Opening device for R/W
11/037/2013 17:37:10 - INFO - Reading device information
11/037/2013 17:37:10 - INFO - Phone ready for flashmode operations.
11/037/2013 17:37:10 - INFO - Current device : E15i - CB511N2F52 - 1241-2655_R4B - 1236-9291_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
11/037/2013 17:37:10 - INFO - Start Flashing
11/037/2013 17:37:10 - INFO - Processing loader.sin
11/037/2013 17:37:10 - INFO - Checking header
11/037/2013 17:37:11 - INFO - Ending flash session
11/037/2013 17:37:11 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/037/2013 17:37:11 - ERROR - Error flashing. Aborted
11/037/2013 17:37:11 - INFO - Device connected in flash mode
11/037/2013 17:37:14 - INFO - Device disconnected
11/037/2013 17:37:15 - INFO - Device connected in flash mode
11/037/2013 17:37:21 - INFO - Device disconnected
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
dansei12 said:
Hey guys , thanks to everybody who has replied already but i have been very short in time lately.
So a few days ago ive managed to get flashtool and tried to flash it with the x10 v1 BLRelock.
Sadly i get an error.
Heres how it goes :
11/036/2013 17:36:44 - INFO - <- This level is successfully initialized
11/036/2013 17:36:44 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
11/036/2013 17:36:50 - INFO - Selected X10 / V1 / BLRelock
11/036/2013 17:36:50 - INFO - Preparing files for flashing
11/036/2013 17:36:50 - INFO - Please connect your device into flashmode.
11/036/2013 17:36:51 - INFO - Device connected with USB debugging on
11/036/2013 17:36:51 - INFO - Connected device : SonyEricson X8
11/036/2013 17:36:52 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-02-05 18:40 +0100) multi-call binary.
11/036/2013 17:36:52 - INFO - Android version : 4.0.4 / kernel version : 3.0.36-android-bst+ / Build number : IMM76L
11/036/2013 17:36:54 - INFO - Device disconnected
11/037/2013 17:37:09 - INFO - Device connected in flash mode
11/037/2013 17:37:10 - INFO - Opening device for R/W
11/037/2013 17:37:10 - INFO - Reading device information
11/037/2013 17:37:10 - INFO - Phone ready for flashmode operations.
11/037/2013 17:37:10 - INFO - Current device : E15i - CB511N2F52 - 1241-2655_R4B - 1236-9291_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
11/037/2013 17:37:10 - INFO - Start Flashing
11/037/2013 17:37:10 - INFO - Processing loader.sin
11/037/2013 17:37:10 - INFO - Checking header
11/037/2013 17:37:11 - INFO - Ending flash session
11/037/2013 17:37:11 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/037/2013 17:37:11 - ERROR - Error flashing. Aborted
11/037/2013 17:37:11 - INFO - Device connected in flash mode
11/037/2013 17:37:14 - INFO - Device disconnected
11/037/2013 17:37:15 - INFO - Device connected in flash mode
11/037/2013 17:37:21 - INFO - Device disconnected
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
Click to expand...
Click to collapse
Every time a noob flashes their x8 with x10-BootooaderRelock God kills a kitten.
I would offer to help but you just can't be bothered reading so it's a waste of time.
I'm laughing so hard right now at you and your phone. Pays to read idiot!
Dude , it doesnt help what you say cause you dont know but bothered to write ?
Why then write in the first place genius.
CtrlAltDelIrl said:
Every time a noob flashes their x8 with x10-BootooaderRelock God kills a kitten.
I would offer to help but you just can't be bothered reading so it's a waste of time.
I'm laughing so hard right now at you and your phone. Pays to read idiot!
Click to expand...
Click to collapse
Haha lolz.... agree with u....!!! I also xperienced this with a noob... !!!!
Sent from my Xperia Z1 using Tapatalk 2
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
dansei12 said:
Dude , it doesnt help what you say cause you dont know but bothered to write ?
Why then write in the first place genius.
Click to expand...
Click to collapse
Dude what u did is exactly wrong dont use x10 relock bl its for x10 phone better u choose stock rom of x8 that is android 2.1 then u r phone will boot and be sure to use flashtol.....!!!!
Sent from my Xperia Z1 using Tapatalk 2
dansei12 said:
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
Click to expand...
Click to collapse
You can use Sony Update Service, you are right it's different !
Download here
SEUS works even when the phone won't boot...
You just need to find xperia x8 from listed mobiles, and follow instructions.. easy
Good luck
@dansei12
i already replied to this prob.. see reply #6 .
Ignore flashtool use SONY PC COMPANION.
adneon0 said:
@dansei12
i already replied to this prob.. see reply #6 .
Ignore flashtool use SONY PC COMPANION.
Click to expand...
Click to collapse
This phone won't boot so PC companion will not be able to repair it !
Only Sony update service is able to repair the phone in flash mode
Many XDA users talk about SEUS and PC companion like if they were the same program...
P.S: if bootloader is unlocked, relock it by using RESTORE option in S1-tool or any soft you used to unlock it.
Relock the bootloader before using Sony Update Service
bileldjerba said:
This phone won't boot so PC companion will not be able to repair it !
Only Sony update service is able to repair the phone in flash mode
Many XDA users talk about SEUS and PC companion like if they were the same program...
P.S: if bootloader is unlocked, relock it by using RESTORE option in S1-tool or any soft you used to unlock it.
Relock the bootloader before using Sony Update Service
Click to expand...
Click to collapse
Are you serious? You don't know how to use pcc to unbrick a soft bricked phone then. Read up. Lots of guides showing just how to do it. And the update service is NOT the only tool to unbrick a phone. Please do a simple search about bricks first before you start giving answers and claim other users think pcc and seus is the same. You're only giving op false info.
cascabel said:
Are you serious? You don't know how to use pcc to unbrick a soft bricked phone then. Read up. Lots of guides showing just how to do it. And the update service is NOT the only tool to unbrick a phone. Please do a simple search about bricks first before you start giving answers and claim other users think pcc and seus is the same. You're only giving op false info.
Click to expand...
Click to collapse
I was just telling you that they are not the same software..
It happened to me during old soft bricks that PC companion sometimes won't do nothing through support zone => update
Ok Update Service is better (because it's different) and sorry for giving a fake info
bileldjerba said:
I was just telling you that they are not the same software..
It happened to me during old soft bricks that PC companion sometimes won't do nothing through support zone => update
Ok Update Service is better (because it's different) and sorry for giving a fake info
Click to expand...
Click to collapse
I apologize for jumping on you mate.
Pcc can repair soft bricked phones although it's tricky for new users. In that aspect seus is better since it's simpler. Personally I prefer flashtool. I have stock rom and kernel on my pc just in case. I guess it's personal preference.
Thanks
QUOTE=bileldjerba;48446553]You can use Sony Update Service, you are right it's different !
Download here
SEUS works even when the phone won't boot...
You just need to find xperia x8 from listed mobiles, and follow instructions.. easy
Good luck[/QUOTE]
Thank you. This was propably the one out of 2 comments that actually helped me.
Thanks phone up and running again.
I cant root it though. I dunno why. I restored it with SEUS and then updated firmware with pcc. Still cant root it.
dansei12 said:
Thank you. This was propably the one out of 2 comments that actually helped me.
Thanks phone up and running again.
I cant root it though. I dunno why. I restored it with SEUS and then updated firmware with pcc. Still cant root it.
Click to expand...
Click to collapse
How are you trying to root it? Can you give us a log? Someone can probably help you out if we can identify what's wrong.
Hi guys, my X8 is not booting up. Everytime I press the power button, it vibrates but after that nothing happens. I tried to flash the stock firmware of x8 thru flashtool but nothing happens. I also tried using SEUS and PC companion. Please help? My computer can recognize the x8 but I don't know what to do next. Is it a hard brick or a soft brick only? Please I need your help. Thanks in advance.
what the log say when you tried to flash with flashtool?
-HuntDX- said:
what the log say when you tried to flash with flashtool?
Click to expand...
Click to collapse
Code:
03/041/2014 14:41:26 - INFO - <- This level is successfully initialized
03/041/2014 14:41:26 - INFO - Flashtool Version 0.8.5.0 built on 2012-06-03 20:17:43
03/041/2014 14:41:26 - INFO - You can drag and drop ftf files here to start flashing them
03/041/2014 14:41:31 - INFO - Device disconnected
03/041/2014 14:41:33 - INFO - Selected X8 E15i 2.1.1.C.0.0._un.ftf
03/041/2014 14:41:33 - INFO - Preparing files for flashing
03/042/2014 14:42:06 - INFO - Please connect your device into flashmode.
03/042/2014 14:42:13 - INFO - Device connected in flash mode
03/042/2014 14:42:14 - INFO - Opening device for R/W
03/042/2014 14:42:14 - INFO - Reading device information
03/042/2014 14:42:14 - INFO - Phone ready for flashmode operations.
03/042/2014 14:42:14 - INFO - Start Flashing
03/042/2014 14:42:14 - INFO - Flashing loader
03/042/2014 14:42:16 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
03/042/2014 14:42:16 - WARN - This file is ignored : simlock.ta
03/042/2014 14:42:16 - INFO - Flashing kernel.sin
03/042/2014 14:42:19 - INFO - Flashing fota0.sin
03/042/2014 14:42:20 - INFO - Flashing fota1.sin
03/042/2014 14:42:20 - INFO - Flashing amss_fs.sin
03/042/2014 14:42:20 - INFO - Flashing amss.sin
03/042/2014 14:42:32 - INFO - Flashing system.sin
03/044/2014 14:44:27 - INFO - Flashing userdata.sin
03/044/2014 14:44:31 - INFO - Flashing cache.sin
03/044/2014 14:44:31 - INFO - Ending flash session
03/044/2014 14:44:31 - INFO - Flashing finished.
03/044/2014 14:44:31 - INFO - Please wait. Phone will reboot
03/044/2014 14:44:31 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/044/2014 14:44:31 - INFO - Device connected in flash mode
My x8 manufacture date is 10w51. I just relocked it hoping that it will fix the problem. But it didn't. The problem happened while I am on LewaOS rom. I just turned off my x8 because I am going to church and when I am going to open it. It just vibrates and nothing happen. And one thing I notice is that even though I didn't hold the back button, it can connect to flashtool on flash mode.
- EDIT -
Guys, please reply. I really need your help.
Stupid observation but believe me i have seen cases where this was the problem, are you sure it isn't out of battery?
If that's not the case then maybe there is a problem with the battery, does it charge normally?
stamatis said:
Stupid observation but believe me i have seen cases where this was the problem, are you sure it isn't out of battery?
If that's not the case then maybe there is a problem with the battery, does it charge normally?
Click to expand...
Click to collapse
I don't know if the battery is the problem. I turned my phone off but it has 20% charge left. Actually, I can't charge my phone now. I tried to charge it for hours but nothing happens. Also, when I look on my battery, there is no change on its appearance. It looks normal. I am totally confused right now on what to do. My PC can recognize it and I can go to flash mode on flash tool. But whenever I try to turn it on, it only just vibrates. Thanks for you reply.
jerickph said:
I don't know if the battery is the problem. I turned my phone off but it has 20% charge left. Actually, I can't charge my phone now. I tried to charge it for hours but nothing happens. Also, when I look on my battery, there is no change on its appearance. It looks normal. I am totally confused right now on what to do. My PC can recognize it and I can go to flash mode on flash tool. But whenever I try to turn it on, it only just vibrates. Thanks for you reply.
Click to expand...
Click to collapse
i faced the same problem... as the #stamatis mentioned above(correctly)....my battery was too low and i tried flashing(unknowingly battery status) again and again(got afraid) stupidly... then i changed my battery connected to flashtool... successfully flashed:cyclops:.....
and believe me it wont charge the battery when the phone facing this kind of problem... better idea is to change the battery and try to flash...
hope that ll work.....
--------------------------------------------------------------------------------------------------------------------
MY DEVICES: X8, Samsung Note II, Galaxy gts5360, HTC One
Common Sense is a Flower that does not grow in every Garden
mailmyinbox said:
i faced the same problem... as the #stamatis mentioned above(correctly)....my battery was too low and i tried flashing(unknowingly battery status) again and again(got afraid) stupidly... then i changed my battery connected to flashtool... successfully flashed:cyclops:.....
and believe me it wont charge the battery when the phone facing this kind of problem... better idea is to change the battery and try to flash...
hope that ll work.....
--------------------------------------------------------------------------------------------------------------------
MY DEVICES: X8, Samsung Note II, Galaxy gts5360, HTC One
Common Sense is a Flower that does not grow in every Garden
Click to expand...
Click to collapse
How much the battery for X8?
jerickph said:
How much the battery for X8?
Click to expand...
Click to collapse
search in Ebay or Amazon....... it might be around 14-15$
--------------------------------------------------------------------------------------------------------
MY DEVICES: X8, Samsung Note II, Galaxy gts5360, HTC One
Common Sense is a Flower that does not grow in every Garden
Thanks for the reply guys. I'll try to buy a new battery but I'm still waiting for other suggestions to fix the problem. Thanks :fingers-crossed:
I already bought a new battery and flashed GDX. But now, i have the same problem. Zzzzzzzzzzzzzzzzz