Xperia X8, Cant run even in Boot Mode - XPERIA X8 Q&A, Help & Troubleshooting

Hi, Could you help me please, I was using FlashTool, and after I Connect phone X8 in flashmode, it got stuckt and then I unplug phone from PC, And It wont start now, and cant connect even in flashmode from Flashtool, and PC companion cant find it,
Can It be solved some way, please?
There is a last report from FlashTool:
24/033/2013 20:33:27 - INFO - Reading device information
24/034/2013 20:34:11 - INFO - Unable to read from phone after having opened it.
24/034/2013 20:34:11 - INFO - trying to continue anyway
24/034/2013 20:34:11 - INFO - Start Flashing
24/034/2013 20:34:11 - INFO - Processing loader
24/034/2013 20:34:11 - INFO - Checking header
24/034/2013 20:34:11 - INFO - Ending flash session
24/034/2013 20:34:11 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
24/034/2013 20:34:11 - ERROR - Error flashing. Aborted
24/034/2013 20:34:11 - INFO - Device disconnected
24/034/2013 20:34:17 - INFO - Selected X10_V1_BLRelock.ftf
24/034/2013 20:34:17 - INFO - Preparing files for flashing
24/034/2013 20:34:17 - INFO - Please connect your device into flashmode.
24/034/2013 20:34:44 - INFO - Flash canceled
Thanks

Why are you trying to flash x10 kernel on x8?

ouch, damn, I did not notice that.
That is Very Good ....
Is there anything to do with that?

You must install on your pc Gordon's gate flash driver and after reebot your pc.Then pcc and flashtool will recognize it.

nope Gordon's gate flash driver do not work either.
Everything was working fine, until I accidently flashed X10 kernel.
Now, It not even react when I connect phone to PC.
I am worried that X10 kernel had sets some higger voltages , or something else what ruined some hardware.

does the phone not turn on or it just stays at se logo? If the phone wont turn on you have a dead boot and this must be repaired using Jtag.

TomyOne said:
nope Gordon's gate flash driver do not work either.
Everything was working fine, until I accidently flashed X10 kernel.
Now, It not even react when I connect phone to PC.
I am worried that X10 kernel had sets some higger voltages , or something else what ruined some hardware.
Click to expand...
Click to collapse
nope. i have flashed X10 kernels sometimes.. it does nothing. a simple reflash works. if it does not detect them i reboot pc or reinstall drivers

Phone do not turn on.
I tried restarting PC, and reinstaling drivers, but I think that shoud not be problem, when I worked before.

Hello,
I would like to ask about possibility of bootlader unlock on my phone.
http://forum.xda-developers.com/showthread.php?t=1254225
I want instal on my phone GingerDX
http://forum.xda-developers.com/showthread.php?t=1188486
I just get my phone X8 from repair service, where they repair it with JTAG and load new original ROM (Firmware).
And If I indentify phone in S1Tool I get NOT RECOGNIZED SIMLOCK certificate.
But before repair SIMLOCK was recognized. And manufactured date on phone is 11W11.
Can I proceed with Bootunlock ? Or is there anything to do to get again simlock certificate recognized?
There is a screen from S1Tool
http://img15.imageshack.us/img15/2133/simlockcertificate.jpg
Thanks

On 11w11 u can try
----------------------------------------------------------
"Life is nothing without freedom!"

Oumn, good, it is dead again.

Related

sony ericsson x8 wont start

hey guys i just thought u might be able to help me. i tried installing android 4.0.3 on my x8 and it turned off and now keeps getting stuck on the black screen with white "sony ericsson" on it. i have tried a hard reset but the hard reset screen wont come up but the green light flashes when i try. plz can some one help me, i need my phone and cant afford a new 1
et1990 said:
hey guys i just thought u might be able to help me. i tried installing android 4.0.3 on my x8 and it turned off and now keeps getting stuck on the black screen with white "sony ericsson" on it. i have tried a hard reset but the hard reset screen wont come up but the green light flashes when i try. plz can some one help me, i need my phone and cant afford a new 1
Click to expand...
Click to collapse
repair phone with SEUS http://sony-ericsson-update-service.en.uptodown.com/
or http://forum.xda-developers.com/showthread.php?t=1011071
when getting sony ericsson logo try pressing back button a few times so you will get into Xrecovery/CWM mode. from there you can flash any ROM you want with the condition of having it on your SD card.
kirmada said:
repair phone with SEUS http://sony-ericsson-update-service.en.uptodown.com/
or http://forum.xda-developers.com/showthread.php?t=1011071
Click to expand...
Click to collapse
worked a treat, thanks alot, i well like my x8 (dunno why, iv had more problems with that than i ever had with anything). but it workin again, thanks again
Sherman143 said:
worked a treat, thanks alot, i well like my x8 (dunno why, iv had more problems with that than i ever had with anything). but it workin again, thanks again
Click to expand...
Click to collapse
ur welcome, glad it worked
loved my x8 but hate andriod so gt a hd mini now, cond the pilok at shop to give me a refund lmao. well how was he to know i rooted it haha
Use PCC
I had flashed an incompatible ROM on my device , and I had the same problem (I dont remember the name of the ROM)
I used PCC. It worked for me. I didnt need SEUS.
Prefer PCC
Thanks!
Thank you so much!
SEUS is da best.
Run out of ideas
Hello, I have the same problem, and already tryed the three options posted on this thread.
tryed to install a miniCM7, and now the phone get stucked in the screen "Sony Ericsson" My phone es a e15a (im in argentina)
1) SEUS -> Message: There is no software available for your phone, your phone already has the most resent software
2) PC Companion -> Message: There is no software available for your phone. Try again later
3) FlashTool -> Message:
25/003/2012 16:03:26 - INFO - Device disconnected
25/003/2012 16:03:34 - INFO - Selected X8a_2.1.1.A.0.6_Baseband_015.ftf
25/003/2012 16:03:34 - INFO - Preparing files for flashing
25/003/2012 16:03:34 - INFO - Please connect your device into flashmode.
25/003/2012 16:03:46 - INFO - Device connected in flash mode
25/003/2012 16:03:47 - INFO - Opening device for R/W
25/003/2012 16:03:47 - INFO - Reading device information
25/003/2012 16:03:47 - INFO - Phone reading for flashing.
25/003/2012 16:03:47 - INFO - Start Flashing
25/003/2012 16:03:47 - INFO - Flashing loader
25/003/2012 16:03:48 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
25/003/2012 16:03:48 - INFO - Flashing amss_fs.sin
25/003/2012 16:03:49 - INFO - Flashing cache.sin
25/003/2012 16:03:49 - INFO - Flashing fota1.sin
25/003/2012 16:03:50 - INFO - Flashing kernel.sin
25/003/2012 16:03:54 - INFO - Flashing amss.sin
25/004/2012 16:04:06 - INFO - Flashing fota0.sin
25/004/2012 16:04:06 - INFO - Flashing finished.
25/004/2012 16:04:06 - INFO - Please wait. Phone will reboot
25/004/2012 16:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
25/004/2012 16:04:07 - INFO - Device connected in flash mode
25/004/2012 16:04:08 - INFO - Device disconnected
25/004/2012 16:04:10 - INFO - Device connected in flash mode
25/004/2012 16:04:33 - INFO - Device disconnected
25/004/2012 16:04:36 - INFO - Device connected with USB debugging off
25/004/2012 16:04:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
So.... Im despered!! any other ideas?
nahueltaibo said:
Hello, I have the same problem, and already tryed the three options posted on this thread.
3) FlashTool -> Message:
25/003/2012 16:03:34 - INFO - Selected X8a_2.1.1.A.0.6_Baseband_015.ftf
25/003/2012 16:03:48 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
So.... Im despered!! any other ideas?
Click to expand...
Click to collapse
You want to flash the baseband on LOCKED boot loader?
That will never work.
Since it seems your boot loader is still locked you only need to flash the Stock ROM.
EDIT: By the way, that's also the root of your problem.
MiniCM7 requires you to...
- Unlock the boot loader (ONLY if your phone is SAFE for doing so!!!)
- Flash nAa's kernel
- Flash MiniCM7
But then, why the hell do I repeat again what's actually written in the OP post of MiniCM7 and you failed to read?

(Q) Having flash issues (doesnt go into flashboot)

Hi,
My Z is running on stock .350, rooted and running XZDualrecovery and locked bootloader. I'm trying to flash the new .235 firmware but I have no luck at all using whatever methods. When I use flashtool, an error appears like this:
22/027/2013 15:27:22 - INFO - Device connected in flash mode
22/027/2013 15:27:22 - INFO - Opening device for R/W
22/027/2013 15:27:22 - INFO - Start Flashing
22/027/2013 15:27:22 - INFO - Processing loader
22/027/2013 15:27:22 - INFO - Checking header
22/027/2013 15:27:22 - INFO - Ending flash session
22/027/2013 15:27:22 - ERROR -
22/027/2013 15:27:22 - ERROR - Error flashing. Aborted
22/027/2013 15:27:23 - INFO - Device connected in flash mode
When I use PC companion, to the step when it told me to power off the phone and holding the volume down key while reconnecting to the PC, nothing happen when I did as it told me to.
Also I notice when I dont run any program at all, and then power off my phone and holding the volume down key while reconnecting, there is a sound on my PC that notify a connecting device, but doesnt show anything at all (window 8). And the led of the phone started with red and blinked into green then disappear completely after just half a second. I dont know what happen, it seems like my phone cant go to flashboot mode. Please help me, I just want to upgrade to a newer firmware with root access and nothing else. Thanks
Have you got the correct drivers installed, have you followed the correct way in @shadowboy23 tutorial also there is a link in my sig on how to (shadows way is thought windows, mine is through dos)
Also try another ftf file maybe a bad creator/download
Edit: Please don't panic post, just read there is a lot of advise out there. Your not the first person to have problems and won't be the last but we all try to help each other
Sent from my C6603 using xda premium

xperia sp not starting

i was trying this app from market called anim mod
wich changes the transition animation.it asked me a reboot so i accepted it.but after the phone went into bootloop.
so i decided to restore my nandroid backup.but it says eroor while restoring....now my fone is stuck up at this logo.
it charges if cconnected to charger.and i can enter cwm.guys please help asap
m on existenz rom 1.3.7
unlocked bootloader
with advanced stock kernel
please help
i tried flashtool
but it shows this
05/004/2013 23:04:03 - INFO - <- This level is successfully initialized
05/004/2013 23:04:03 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
05/004/2013 23:04:08 - INFO - Device disconnected
05/004/2013 23:04:12 - INFO - Selected C5302 / 12.0.A.2.254 / India
05/004/2013 23:04:12 - INFO - Preparing files for flashing
05/005/2013 23:05:08 - INFO - Please connect your device into flashmode.
05/005/2013 23:05:17 - INFO - Device connected in flash mode
05/006/2013 23:06:00 - INFO - Device disconnected
my device is c5302.but because of existenz my phone used to show c5303.
i have instlled all the drivers.and the drivers are ready to use
but still cant flash and phone just shows sony screen and then the attachment one pic
i tried flashtool
but it shows this
05/004/2013 23:04:03 - INFO - <- This level is successfully initialized
05/004/2013 23:04:03 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
05/004/2013 23:04:08 - INFO - Device disconnected
05/004/2013 23:04:12 - INFO - Selected C5302 / 12.0.A.2.254 / India
05/004/2013 23:04:12 - INFO - Preparing files for flashing
05/005/2013 23:05:08 - INFO - Please connect your device into flashmode.
05/005/2013 23:05:17 - INFO - Device connected in flash mode
05/006/2013 23:06:00 - INFO - Device disconnected
my device is c5302.but because of existenz my phone used to show c5303.
i have instlled all the drivers.and the drivers are ready to use
but still cant flash and phone just shows sony screen and then the attachment one pic
Restore the system. Use Sony PC Companion. And when you install, root and cwm.
Saludos.
EDIT:
When you install the drivers, it must be in usb debugging mode. Delete in windows system administration and connects to your pc othertime, but as you can't enter the system, you can't do it.
The restoration process is long. Pc Companion download the rom and then is installed. Make sure the phone has at least 30% battery (for internet download speed of 10mb), more is better. If you are in bootloop when you recharge or if you can't recharge, don't waste battery, located where is the option in PC Companion and when you have controlled, do it.
Good Luck.
What status now?
i tried flashtool.not happening the same message m getting plz suggest something
Rajeev said:
What status now?
Click to expand...
Click to collapse
bro plz help.
my device is c5302 but becz of existenzz it changed to c5303.so pc companion used to detect it as c5303.shud i try flashing c5303??
and while restoring the nandroid backup it says erasing boot image before restart and the says erroor while restoring data.
m on advances stock kernel.flashtool detecting my phone in flashmode but it doesnt proceed an the device gets disconnected
dipesh1502 said:
bro plz help.
my device is c5302 but becz of existenzz it changed to c5303.so pc companion used to detect it as c5303.shud i try flashing c5303??
and while restoring the nandroid backup it says erasing boot image before restart and the says erroor while restoring data.
m on advances stock kernel.flashtool detecting my phone in flashmode but it doesnt proceed an the device gets disconnected
Click to expand...
Click to collapse
Forget about PC Companion.
First totally disable PC Companion and then try with Flashtool again. I mean While using Flashtool PC Companion will b disabled in ur PC. Try it..
If u have C5302 Firmware means flash that.. Its very very easy bro. Dont know what happens with u .. try again the way i told
Guys problem solved
Did a factory reset and kept for charging for 1 hour
Fone restrtd automaticaly.
Thanks
To get it to C5302, just edit build.prop :wink:

[Q] HELP:: Forgot to unlock bootloader and now stuck ??

hello guys . i have a xperia x8 e15i and i tried to install a custom rom. so it all went like this.
First i downlaoded gingerdx v.31 then rooted my phone,installed busybox,installed xrecovery,put gingerdx in my sd card,booted my phone into xrecovery made a backup of my rom cleared my cache installed gingerdx and hit reboot.
now my phone just stays on the SE logo and cant get into xrecovery. every time i put in the battery it just keeps on going into the SE logo and doesnt do anything.
I was thinking maybe i forgot to unlock bootloader but i cant really fix that now. all im thinking is how to get it back.
any suggestions ?
It's just a soft brick. You can repair it using pcc or simply flash stock rom via flashtool.
It's a soft brick. I have encountered it aswell. If you have PC companion you can install the Stock Eclair 2.1 back or flash it via Flashtool
banny.dude said:
It's a soft brick. I have encountered it aswell. If you have PC companion you can install the Stock Eclair 2.1 back or flash it via Flashtool
Click to expand...
Click to collapse
thanks but i have tried to do it with pc companoin which wont let me cause it tells me to turn my phone on which i cant and when i try flash it with flash tool i cant find the right firmware :I
No dude. Just click on the support zone and some option will say Repair device or Upgrade software( I am not sure .. cant remember , you'll find it ) after that it will Download the Eclair 2.1 automatically and when it is downloaded it will ask you to hold some button and while holding that button ( I think its the back button ) connect the usb cable to your phone! your phone will show a green light and after that leave the job on the PC companion
solution
@dansei12
Nothing to worry, its just a soft brick , easy to fix.
You just need SONY PC COMPANION and your device with data cable.
Follow the steps in screenshot.
After the third step just follow instruction [SONY will show you the way ] .. and it will be done.
NOTE:- You will return back to stock without SU. !
Just a soft brick..
experienced the exat issue..
just use Sony Update service.. .
easiest to remove your soft brick!
Flashtool Failure
Hey guys , thanks to everybody who has replied already but i have been very short in time lately.
So a few days ago ive managed to get flashtool and tried to flash it with the x10 v1 BLRelock.
Sadly i get an error.
Heres how it goes :
11/036/2013 17:36:44 - INFO - <- This level is successfully initialized
11/036/2013 17:36:44 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
11/036/2013 17:36:50 - INFO - Selected X10 / V1 / BLRelock
11/036/2013 17:36:50 - INFO - Preparing files for flashing
11/036/2013 17:36:50 - INFO - Please connect your device into flashmode.
11/036/2013 17:36:51 - INFO - Device connected with USB debugging on
11/036/2013 17:36:51 - INFO - Connected device : SonyEricson X8
11/036/2013 17:36:52 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-02-05 18:40 +0100) multi-call binary.
11/036/2013 17:36:52 - INFO - Android version : 4.0.4 / kernel version : 3.0.36-android-bst+ / Build number : IMM76L
11/036/2013 17:36:54 - INFO - Device disconnected
11/037/2013 17:37:09 - INFO - Device connected in flash mode
11/037/2013 17:37:10 - INFO - Opening device for R/W
11/037/2013 17:37:10 - INFO - Reading device information
11/037/2013 17:37:10 - INFO - Phone ready for flashmode operations.
11/037/2013 17:37:10 - INFO - Current device : E15i - CB511N2F52 - 1241-2655_R4B - 1236-9291_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
11/037/2013 17:37:10 - INFO - Start Flashing
11/037/2013 17:37:10 - INFO - Processing loader.sin
11/037/2013 17:37:10 - INFO - Checking header
11/037/2013 17:37:11 - INFO - Ending flash session
11/037/2013 17:37:11 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/037/2013 17:37:11 - ERROR - Error flashing. Aborted
11/037/2013 17:37:11 - INFO - Device connected in flash mode
11/037/2013 17:37:14 - INFO - Device disconnected
11/037/2013 17:37:15 - INFO - Device connected in flash mode
11/037/2013 17:37:21 - INFO - Device disconnected
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
dansei12 said:
Hey guys , thanks to everybody who has replied already but i have been very short in time lately.
So a few days ago ive managed to get flashtool and tried to flash it with the x10 v1 BLRelock.
Sadly i get an error.
Heres how it goes :
11/036/2013 17:36:44 - INFO - <- This level is successfully initialized
11/036/2013 17:36:44 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
11/036/2013 17:36:50 - INFO - Selected X10 / V1 / BLRelock
11/036/2013 17:36:50 - INFO - Preparing files for flashing
11/036/2013 17:36:50 - INFO - Please connect your device into flashmode.
11/036/2013 17:36:51 - INFO - Device connected with USB debugging on
11/036/2013 17:36:51 - INFO - Connected device : SonyEricson X8
11/036/2013 17:36:52 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-02-05 18:40 +0100) multi-call binary.
11/036/2013 17:36:52 - INFO - Android version : 4.0.4 / kernel version : 3.0.36-android-bst+ / Build number : IMM76L
11/036/2013 17:36:54 - INFO - Device disconnected
11/037/2013 17:37:09 - INFO - Device connected in flash mode
11/037/2013 17:37:10 - INFO - Opening device for R/W
11/037/2013 17:37:10 - INFO - Reading device information
11/037/2013 17:37:10 - INFO - Phone ready for flashmode operations.
11/037/2013 17:37:10 - INFO - Current device : E15i - CB511N2F52 - 1241-2655_R4B - 1236-9291_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
11/037/2013 17:37:10 - INFO - Start Flashing
11/037/2013 17:37:10 - INFO - Processing loader.sin
11/037/2013 17:37:10 - INFO - Checking header
11/037/2013 17:37:11 - INFO - Ending flash session
11/037/2013 17:37:11 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/037/2013 17:37:11 - ERROR - Error flashing. Aborted
11/037/2013 17:37:11 - INFO - Device connected in flash mode
11/037/2013 17:37:14 - INFO - Device disconnected
11/037/2013 17:37:15 - INFO - Device connected in flash mode
11/037/2013 17:37:21 - INFO - Device disconnected
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
Click to expand...
Click to collapse
Every time a noob flashes their x8 with x10-BootooaderRelock God kills a kitten.
I would offer to help but you just can't be bothered reading so it's a waste of time.
I'm laughing so hard right now at you and your phone. Pays to read idiot!
Dude , it doesnt help what you say cause you dont know but bothered to write ?
Why then write in the first place genius.
CtrlAltDelIrl said:
Every time a noob flashes their x8 with x10-BootooaderRelock God kills a kitten.
I would offer to help but you just can't be bothered reading so it's a waste of time.
I'm laughing so hard right now at you and your phone. Pays to read idiot!
Click to expand...
Click to collapse
Haha lolz.... agree with u....!!! I also xperienced this with a noob... !!!!
Sent from my Xperia Z1 using Tapatalk 2
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
dansei12 said:
Dude , it doesnt help what you say cause you dont know but bothered to write ?
Why then write in the first place genius.
Click to expand...
Click to collapse
Dude what u did is exactly wrong dont use x10 relock bl its for x10 phone better u choose stock rom of x8 that is android 2.1 then u r phone will boot and be sure to use flashtol.....!!!!
Sent from my Xperia Z1 using Tapatalk 2
dansei12 said:
I searched it up but to fix it you needed to turn the device on for the awnser i found.
Any suggestions for this ?
Also sorry that i havent been able to run pcc but i will have time this weekend .
Click to expand...
Click to collapse
You can use Sony Update Service, you are right it's different !
Download here
SEUS works even when the phone won't boot...
You just need to find xperia x8 from listed mobiles, and follow instructions.. easy
Good luck
@dansei12
i already replied to this prob.. see reply #6 .
Ignore flashtool use SONY PC COMPANION.
adneon0 said:
@dansei12
i already replied to this prob.. see reply #6 .
Ignore flashtool use SONY PC COMPANION.
Click to expand...
Click to collapse
This phone won't boot so PC companion will not be able to repair it !
Only Sony update service is able to repair the phone in flash mode
Many XDA users talk about SEUS and PC companion like if they were the same program...
P.S: if bootloader is unlocked, relock it by using RESTORE option in S1-tool or any soft you used to unlock it.
Relock the bootloader before using Sony Update Service
bileldjerba said:
This phone won't boot so PC companion will not be able to repair it !
Only Sony update service is able to repair the phone in flash mode
Many XDA users talk about SEUS and PC companion like if they were the same program...
P.S: if bootloader is unlocked, relock it by using RESTORE option in S1-tool or any soft you used to unlock it.
Relock the bootloader before using Sony Update Service
Click to expand...
Click to collapse
Are you serious? You don't know how to use pcc to unbrick a soft bricked phone then. Read up. Lots of guides showing just how to do it. And the update service is NOT the only tool to unbrick a phone. Please do a simple search about bricks first before you start giving answers and claim other users think pcc and seus is the same. You're only giving op false info.
cascabel said:
Are you serious? You don't know how to use pcc to unbrick a soft bricked phone then. Read up. Lots of guides showing just how to do it. And the update service is NOT the only tool to unbrick a phone. Please do a simple search about bricks first before you start giving answers and claim other users think pcc and seus is the same. You're only giving op false info.
Click to expand...
Click to collapse
I was just telling you that they are not the same software..
It happened to me during old soft bricks that PC companion sometimes won't do nothing through support zone => update
Ok Update Service is better (because it's different) and sorry for giving a fake info
bileldjerba said:
I was just telling you that they are not the same software..
It happened to me during old soft bricks that PC companion sometimes won't do nothing through support zone => update
Ok Update Service is better (because it's different) and sorry for giving a fake info
Click to expand...
Click to collapse
I apologize for jumping on you mate.
Pcc can repair soft bricked phones although it's tricky for new users. In that aspect seus is better since it's simpler. Personally I prefer flashtool. I have stock rom and kernel on my pc just in case. I guess it's personal preference.
Thanks
QUOTE=bileldjerba;48446553]You can use Sony Update Service, you are right it's different !
Download here
SEUS works even when the phone won't boot...
You just need to find xperia x8 from listed mobiles, and follow instructions.. easy
Good luck[/QUOTE]
Thank you. This was propably the one out of 2 comments that actually helped me.
Thanks phone up and running again.
I cant root it though. I dunno why. I restored it with SEUS and then updated firmware with pcc. Still cant root it.
dansei12 said:
Thank you. This was propably the one out of 2 comments that actually helped me.
Thanks phone up and running again.
I cant root it though. I dunno why. I restored it with SEUS and then updated firmware with pcc. Still cant root it.
Click to expand...
Click to collapse
How are you trying to root it? Can you give us a log? Someone can probably help you out if we can identify what's wrong.

[Q] Xperia Z1 bricked : qhsusb_bulk ?

Hi Guys,
I require your help.
I think i have bricked my Xperia Z1 while trying to flash a ftf.
firstly when i tried to switch on my phone it showed "Update failed please connect to system and update again"
now the phone is totally bricked (no response) and when i try to connect it in flashmode windows detect it as qhsusb_bulk device.
Can anyone please suggest or help !
can you please enumerate your steps of doing this?if it's ok...think positive dont panic!
You are not the first and I think you are not the last. Phone Bricked mean dead, your is not. If you PC can recognize the phone that mean something is working.
So, did you use flashtool v0.9.11 or v0.9.13?
From my previous experience, the best way to rescue Xperia is Sony Update Service.
So, please try SUS.
maxboy said:
From my previous experience, the best way to rescue Xperia is Sony Update Service.
So, please try SUS.
Click to expand...
Click to collapse
Someone said with PC Companion you repair your phone, try as well.
eclyptos said:
Someone said with PC Companion you repair your phone, try as well.
Click to expand...
Click to collapse
Thanks Guys for replies :
Flashtool version 0.9.13.0
Somehow i got the phone being detected in flashmode but now flashtool gives following error :
20/034/2013 17:34:32 - INFO - Selected C6902 / 14.1.G.2.257 / Generic_IN
20/034/2013 17:34:32 - INFO - Preparing files for flashing
20/040/2013 17:40:39 - INFO - Please connect your device into flashmode.
20/041/2013 17:41:02 - INFO - Device connected in flash mode
20/041/2013 17:41:02 - INFO - Opening device for R/W
20/041/2013 17:41:02 - INFO - Reading device information
20/041/2013 17:41:03 - INFO - Phone ready for flashmode operations.
20/041/2013 17:41:03 - INFO - Current device : C6902 - CB51251KDX - 1277-2364_R4A - 1272-6084_14.1.G.1.518 - GLOBAL-HSPA_14.1.G.1.518
20/041/2013 17:41:03 - INFO - Start Flashing
20/041/2013 17:41:03 - INFO - Processing loader.sin
20/041/2013 17:41:03 - INFO - Checking header
20/041/2013 17:41:03 - INFO - Flashing data
20/041/2013 17:41:03 - INFO - Loader : S1_Root_6732 - Version : MSM8974_23 / Boot version : S1_Boot_MSM8974_LA1.0_56-A / Bootloader status : ROOTABLE
20/041/2013 17:41:03 - INFO - Processing partition-image.sin
20/041/2013 17:41:03 - INFO - Checking header
20/041/2013 17:41:03 - INFO - Flashing data
20/041/2013 17:41:03 - INFO - Parsing boot delivery
20/041/2013 17:41:03 - INFO - Phone boot version : S1_Boot_MSM8974_LA1.0_56-A. Boot delivery version : S1_Boot_MSM8974_LA1.0_67
20/041/2013 17:41:03 - INFO - Going to flash boot delivery
20/041/2013 17:41:03 - INFO - Ending flash session
20/041/2013 17:41:03 - ERROR - -1
20/041/2013 17:41:03 - ERROR - Error flashing. Aborted
20/041/2013 17:41:03 - INFO - Device connected in flash mode
20/041/2013 17:41:04 - INFO - Device disconnected
20/041/2013 17:41:06 - INFO - Device connected in flash mode
nice
Karmic. said:
Hi Guys,
I require your help.
I think i have bricked my Xperia Z1 while trying to flash a ftf.
firstly when i tried to switch on my phone it showed "Update failed please connect to system and update again"
now the phone is totally bricked (no response) and when i try to connect it in flashmode windows detect it as qhsusb_bulk device.
Can anyone please suggest or help !
Click to expand...
Click to collapse
i have the same question
eclyptos said:
Someone said with PC Companion you repair your phone, try as well.
Click to expand...
Click to collapse
Since your device is detected by flashtool , please use SUS.
Flashtool has little chance to force flash since it gives errors and stop half way.
But SUS does because it dont need to verifer your phone but you have to choose it from a list, it might not success at the first time but will go through the whole process(i tried to resure xperia TX with 5 flashs and it eventually boot)
So keep flash with SUS until your phone boot.
PC companion need to recognise your phone model so it is a bit tricky.
Sent from my C6906 using xda app-developers app
maxboy said:
Since your device is detected by flashtool , please use SUS.
PC companion need to recognise your phone model so it is a bit tricky.
Click to expand...
Click to collapse
Like you can see in the post the phone is recognised so I don't see the problem.
I will also recommended to try different FTF, it seem like will be some error there.
And at last I will repeated the follow steps:
Keep pressed volume down all the time and connect the phone via usb to PC, do not open flashtool (do not use drivers from sony site, if you installed them uninstall them, windows will do that) wait 1 minute and let windows install the drivers automatically first, then open flashtool, select firmware and flash it, keep pushing volume down all the time. When on the green bar below show up the % of the process you can leave your phone alone. Done.
maxboy said:
Since your device is detected by flashtool , please use SUS.
Flashtool has little chance to force flash since it gives errors and stop half way.
But SUS does because it dont need to verifer your phone but you have to choose it from a list, it might not success at the first time but will go through the whole process(i tried to resure xperia TX with 5 flashs and it eventually boot)
So keep flash with SUS until your phone boot.
PC companion need to recognise your phone model so it is a bit tricky.
Sent from my C6906 using xda app-developers app
Click to expand...
Click to collapse
Or just try flashing using Flashtool and tick "no final verification"
Just2Cause said:
Or just try flashing using Flashtool and tick "no final verification"
Click to expand...
Click to collapse
+1
and wipe data, cache and appslog.
Xperia Z1磚砌:qhsusb_bulk
me too!:(
:crying:
I have the same problem, anyone can help me?
PC recognizes it as qualcomm hs-usb 9008 qdloader my Z1
No Logo Sony, only LED Yellow o RED.
Regards!!! :good:
Kisaraji said:
:crying:
I have the same problem, anyone can help me?
PC recognizes it as qualcomm hs-usb 9008 qdloader my Z1
No Logo Sony, only LED Yellow o RED.
Regards!!! :good:
Click to expand...
Click to collapse
I have the same problem like yours no vibration no led blinking or something i even removed the battery tryed to charge it over 24 hours nothing to get it back to life so we have a hardbricked phone now thanks to 4.3 update and for now the only solution is to change the mainboard or first to chek it with a fully charged battery (new one)
Kisaraji said:
:crying:
I have the same problem, anyone can help me?
PC recognizes it as qualcomm hs-usb 9008 qdloader my Z1
No Logo Sony, only LED Yellow o RED.
Regards!!! :good:
Click to expand...
Click to collapse
Meni30 said:
I have the same problem like yours no vibration no led blinking or something i even removed the battery tryed to charge it over 24 hours nothing to get it back to life so we have a hardbricked phone now thanks to 4.3 update and for now the only solution is to change the mainboard or first to chek it with a fully charged battery (new one)
Click to expand...
Click to collapse
you need to have a look how to flash the device if it is in hs-usb mode (qualcomm is the manufacturer of our snapdragon 800 CPU and the hs-usb mode is meant for vendors to flash bootloader a.s.o.)
i never tried such a thing and maybe it simply can't be done without the special unofficial tools that the vendors have.
so this really looks like a brick ...
hope the best for you guys ...
Kisaraji said:
:crying:
PC recognizes it as qualcomm hs-usb 9008 qdloader my Z1
Click to expand...
Click to collapse
Bored to mention it: Wrong Windwos ADB Drivers. If the device is recognized how can it be bricked. Just wrong set/recognized.
But if you all prefer to send your devices in, open the cases (OMG) or other useless stuff... Entering in Flash/Fastbootmode has nothing to do with the battery. On older Xperia devices you could even flash without/removed battery... The S1 Fastboot unlock worked without battery. How do you think does Sony interact with the ROM's or EEPROMS? A special hidden connector? A special Software? Whispering?
I have the same problem and posted here - http://forum.xda-developers.com/showthread.php?t=2623486
I tried with a second sony xperia z1 that already had 4.3 OTA update and then tried flashing it again using flashtool and it worked so this eliminates the program and usb cable.....the one I have now which is giving me issues is one which had 4.2.2 and im trying to flash to 4.3

Categories

Resources