Related
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400
hello everyone
here is the deal
i'vetried to flash ths AC!D Audio engine on my phone and for some reason it didnt work out
no the phone is stuck in the booting screen
the thing is i dont have any rom copied to the SD Card and The STUPID mistake is that i didnt back it up first
ive tried to wipe (factory reset/cache/dalvik cache) with no luck
now to add oil to the fire recently ive formatted my laptop and im not sure that all the phones driver are installed, so i cant be sure if using odin will work
what should i do
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:
Downloadaholik said:
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:
Click to expand...
Click to collapse
Just download the required Files in your Laptop, use CWM> mounts and storage> copy files to your SD card and flash
Install kies and adb. That will ensure that you have all the drivers. Just make sure that kies is not running when you want yo use odin.
Sent from my GT-I9000 using Tapatalk 2
Samsung Drivers...
Downloadaholik said:
hello everyone
here is the deal
i'vetried to flash ths AC!D Audio engine on my phone and for some reason it didnt work out
no the phone is stuck in the booting screen
the thing is i dont have any rom copied to the SD Card and The STUPID mistake is that i didnt back it up first
ive tried to wipe (factory reset/cache/dalvik cache) with no luck
now to add oil to the fire recently ive formatted my laptop and im not sure that all the phones driver are installed, so i cant be sure if using odin will work
what should i do
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:
Click to expand...
Click to collapse
I used this link originally to root my phone and it has links for windows drivers for samsung phones.
http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/
I also think there are drivers in some of the Odin packages you can download.
xsenman said:
Just download the required Files in your Laptop, use CWM> mounts and storage> copy files to your SD card and flash
Click to expand...
Click to collapse
Dude You Are a Genius
it worked thank you soo much
Try this
http://forum.xda-developers.com/showthread.php?t=1637966
Hello guys finally got root but cant install any roms? I have rooted via rootgalaxynote.com installing odin ver. 1.85 and cwm recovery 5.5 or something like that but still get error 7 when install cm10 zip file thru cwm. I also tried to install twrp thru odin but says invalid and ends. Dont know if im outdated with any of these versions as they are old threads and dont know if the uvmal1 update back in january has anything to do with it. Please help i have rooted as i have titanium backup and superuser installed. I am lost as to how to fix this issue and have read everywhere. I saw a link for cwm ver 6.0.3.1 which is what i need i believe but it was on a tmo s2 thread so dont know i can use that link and just reflash thru odin again like i did the first time. Thanks
parmakr said:
Hello guys finally got root but cant install any roms? I have rooted via rootgalaxynote.com installing odin ver. 1.85 and cwm recovery 5.5 or something like that but still get error 7 when install cm10 zip file thru cwm. I also tried to install twrp thru odin but says invalid and ends. Dont know if im outdated with any of these versions as they are old threads and dont know if the uvmal1 update back in january has anything to do with it. Please help i have rooted as i have titanium backup and superuser installed. I am lost as to how to fix this issue and have read everywhere. I saw a link for cwm ver 6.0.3.1 which is what i need i believe but it was on a tmo s2 thread so dont know i can use that link and just reflash thru odin again like i did the first time. Thanks
Click to expand...
Click to collapse
Instead of odin, try to flash the TWRP zip version through CWM and see if that gets you anywhere.
www.techerrata.com/file/twrp2/sgh-t879/openrecovery-twrp-2.3.1.1-sgh-879.zip
I will see if that works thanks
Ok i got it installed using the zip method thru cwm now i got twrp. One problem though when i click to install in twrp recovery i cant find any of the downloaded roms or any files on my internal sd card. I only show my external sd card which is only pictures and videos which is all keep in there. There is a an option to click on external or internal at the top of the page but nothing happens when i click the small bubble for internal sd card? What can be the problem? Thanks for your help
parmakr said:
Ok i got it installed using the zip method thru cwm now i got twrp. One problem though when i click to install in twrp recovery i cant find any of the downloaded roms or any files on my internal sd card. I only show my external sd card which is only pictures and videos which is all keep in there. There is a an option to click on external or internal at the top of the page but nothing happens when i click the small bubble for internal sd card? What can be the problem? Thanks for your help
Click to expand...
Click to collapse
In TWRP, if you click advanced/ filemanager/ emmc folder, can you see your internal storage? There is also fix permissions under advanced. You could try that too if nothing else is working.
fraughtsigewulf said:
In TWRP, if you click advanced/ filemanager/ emmc folder, can you see your internal storage? There is also fix permissions under advanced. You could try that too if nothing else is working.
Click to expand...
Click to collapse
Awesome it was under emmc folder. Thanks again great help!
parmakr said:
Hello guys finally got root but cant install any roms? I have rooted via rootgalaxynote.com installing odin ver. 1.85 and cwm recovery 5.5 or something like that but still get error 7 when install cm10 zip file thru cwm. I also tried to install twrp thru odin but says invalid and ends. Dont know if im outdated with any of these versions as they are old threads and dont know if the uvmal1 update back in january has anything to do with it. Please help i have rooted as i have titanium backup and superuser installed. I am lost as to how to fix this issue and have read everywhere. I saw a link for cwm ver 6.0.3.1 which is what i need i believe but it was on a tmo s2 thread so dont know i can use that link and just reflash thru odin again like i did the first time. Thanks
Click to expand...
Click to collapse
How did you get cwm to work? I've tried through rom manger and it says its installed and its a file in my internal sd but when I reboot into recovery it just the factory recovery screen????? I have been looking for a tar file that I can flash through odin ?
http://forum.xda-developers.com/showthread.php?p=47238901
follwed all the steps on this thread but it just doesnt work evrytime i enter the command it says no such file found, pls help
If you see the main thread you notice lot of people are reporting problems mounting internal storage.. why not keep an eye there...
Or maybe you use the alternate method or putting an alternate kernel the file in /preload/TWRP/
This does not require root, and the preload partition is mounted in the recovery instead of the sd card automaticly.
placing it /preload/ does require root, so go for /preload/TWRP/
Azeazezar said:
Or maybe you use the alternate method or putting an alternate kernel the file in /preload/TWRP/
This does not require root, and the preload partition is mounted in the recovery instead of the sd card automaticly.
placing it /preload/ does require root, so go for /preload/TWRP/
Click to expand...
Click to collapse
Thanks totally solved it
Need help to restore N7000
Hi i had installed Teamwin recovery v2.6.3.0 when i installed omni 4.4 rom on my samsung galaxy gt n7000. As i installed 4-4 my keyboard was not working on it . By mistake i have wipe dalvik cache ,system,data and cache as the factory reset was failed . I did not notice that it was not showing my sd card .
Now i am struck up i have no os on my device .
I had previously CWM recovery and the backup of my Asylum rom was on sd card now i dont know how to fix up my phone.
i tried few things it even shows u need to install supersu and as i reboot it try to install it but it never happen waited for long time for that.
i will appreciate if anyone can guide me and tell me how can i come out of the problem.
i will also like to bring to your notice that when i connect my device with laptop via usb cable it is not deducting my device
will be waiting i hope some one of u will take out some time and advice me how to make my phone work again
omesh_midha said:
Hi i had installed Teamwin recovery v2.6.3.0 when i installed omni 4.4 rom on my samsung galaxy gt n7000. As i installed 4-4 my keyboard was not working on it . By mistake i have wipe dalvik cache ,system,data and cache as the factory reset was failed . I did not notice that it was not showing my sd card .
Now i am struck up i have no os on my device .
I had previously CWM recovery and the backup of my Asylum rom was on sd card now i dont know how to fix up my phone.
i tried few things it even shows u need to install supersu and as i reboot it try to install it but it never happen waited for long time for that.
i will appreciate if anyone can guide me and tell me how can i come out of the problem.
i will also like to bring to your notice that when i connect my device with laptop via usb cable it is not deducting my device
will be waiting i hope some one of u will take out some time and advice me how to make my phone work again
Click to expand...
Click to collapse
Read:
http://forum.xda-developers.com/showpost.php?p=47238901&postcount=40
also to restore previous backup, you may also flash philz kernel and then restore.
Should be fixed in the latest nightly
kindly advice
treacherous_hawk said:
Read:
http://forum.xda-developers.com/showpost.php?p=47238901&postcount=40
also to restore previous backup, you may also flash philz kernel and then restore.
Click to expand...
Click to collapse
Thanks for your help...Can you tell how to flash philz kernel as i have no os on my mobile its only showing me teamwin . i have cwm and recovery but in teamwin i cant excess my sdcard .
will highly appreciate your advice
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
nokiamodeln91 said:
Should be fixed in the latest nightly
Click to expand...
Click to collapse
Thanks for the reply
Can you help me in getting my mobile working again . is there any way i can excess my sd card .....is there any way i can go to cwm recovery as i have the backup on that
Waiting for your reply
Thanks
If you use root explorer, can you see any of the files? IN TWRP recovery, when you click on "Install", which folder do you see as default.. try to place the Philz kernel zip to that location and flash it in recovery.. then reboot recovery.
can you please explain alternate method
Azeazezar said:
Or maybe you use the alternate method or putting an alternate kernel the file in /preload/TWRP/
This does not require root, and the preload partition is mounted in the recovery instead of the sd card automaticly.
placing it /preload/ does require root, so go for /preload/TWRP/
Click to expand...
Click to collapse
Can you please advice how can i put another kernel when i have no os.....and my mobile is not deducted by my laptop .is there any other way i can go back to cwm recovery which is on my sd card ....
kindly help
Why is there no OS? Anyhow.. boot into twrp recovery.. connect phone to pc and run adb devices. It should show the phone.. then activate adb sideload. In cmd prompt, use command adb sideload "path or the zip file on pc". this should install the kernel/rom.
thanks
nokiamodeln91 said:
If you use root explorer, can you see any of the files? IN TWRP recovery, when you click on "Install", which folder do you see as default.. try to place the Philz kernel zip to that location and flash it in recovery.. then reboot recovery.
Click to expand...
Click to collapse
thanks for your prompt help
I am sorry to ask so many questions here . I dont know much about flashing and doing trouble shooting i also appreciate your help.
As i told have no os on my device which is samsung gt n7000 . When i go to TWRP i went to Advance then from there recovery but i cant find any files there .
All my backup was on cwm recovery which is on my internal and sd card also both of which i cant see on TWRP
when i reboot my device it says supersu not installed it tries to install but nothing happen and the screen keep telling that its installing supersu
Kindly let me know if there is any other way to make my device work
Thanks
try whats in my last post.
thanks
nokiamodeln91 said:
try whats in my last post.
Click to expand...
Click to collapse
Dear Sir
I am will appreciate if you can provide me link or any tutorial where i can get the same done . As i am not good in all this and have no knowledge regarding the same.
And do let me know if there is any other way from where i can just excess my data on sd card and internal card and i can use cwm as i have used that so many times once i can excess my data on internal and external card of my device i can do that.
Is there any terminal command on TWRP from where i can run supersu or any command so i can excess my internal and external sd storage .
I am sorry to bother u again and again but i hope you can understand i am not good like ur
Waiting for your reply
Warm Regards and Thanks
Easy way use pc Odin flash philz kernel. Boot into recover using three button method and restore cwm backup. You will get yellow triangle but that's easy to remove as well. If anybody is going to be flashing any Roms pc Odin and adb is a must have. If don't have a backup or a Rom on your sd card you can flash a stock Rom with Odin.
Experimental roms are going to leave you stranded most of the time and if people are going to flash roms labeled as such then the should learn how to recover from them before flashing
Sent from my GT-N7000 using XDA Premium 4 mobile app
ttibbetts83 said:
Experimental roms are going to leave you stranded most of the time and if people are going to flash roms labeled as such then the should learn how to recover from them before flashing
Click to expand...
Click to collapse
Should stick it.
omesh_midha said:
thanks for your prompt help
I am sorry to ask so many questions here . I dont know much about flashing and doing trouble shooting i also appreciate your help.
As i told have no os on my device which is samsung gt n7000 . When i go to TWRP i went to Advance then from there recovery but i cant find any files there .
All my backup was on cwm recovery which is on my internal and sd card also both of which i cant see on TWRP
when i reboot my device it says supersu not installed it tries to install but nothing happen and the screen keep telling that its installing supersu
Kindly let me know if there is any other way to make my device work
Thanks
Click to expand...
Click to collapse
I recommend Odin(PC).
As an alternative, try this, should mount the external SD card.
This does not work if that sd card is partitioned.
Code:
mount /dev/block/mmcblk1 /sdcard/
I don't have enough posts to post in the right thread, so I have to do it here.
Unable to install unofficial version of CM11, I have CWM Recovery 6.0.4.8., and when I try to install, the message is
set_metadata_recursive : some changes failed
E:Error in /data/media...etc
Click to expand...
Click to collapse
File is on the SD card, and I found that the error message is connected when using old CWM, but I don't have the idea why it stops, I don't see that there is newer one. Also, CWM is not doing anything with mount USB storage, I just click and nothing happens.
Phone is Sprint LS-995.
nesharm said:
I don't have enough posts to post in the right thread, so I have to do it here.
Unable to install unofficial version of CM11, I have CWM Recovery 6.0.4.8., and when I try to install, the message is
File is on the SD card, and I found that the error message is connected when using old CWM, but I don't have the idea why it stops, I don't see that there is newer one. Also, CWM is not doing anything with mount USB storage, I just click and nothing happens.
Phone is Sprint LS-995.
Click to expand...
Click to collapse
The newest CWM is 6.0.4.9. My suggestion would be to delete LGFreedom folder off your SD Card and re-run the FreedomFlex app again as it will then download the latest CWM and you can just flash the recovery again. I had the same issue with 6.0.4.8
Problem is I can't get anything accept CWM, and I can't mount internal card, LG driver is already installed, and I tried to reinstall it, but he is still not seeing it. Any idea how to access it? If I have to have old Sprint ROM to install FreedomFlex again, I need somehow to transfer it to the internal memory and start the installation from there.
nesharm said:
Problem is I can't get anything accept CWM, and I can't mount internal card, LG driver is already installed, and I tried to reinstall it, but he is still not seeing it. Any idea how to access it? If I have to have old Sprint ROM to install FreedomFlex again, I need somehow to transfer it to the internal memory and start the installation from there.
Click to expand...
Click to collapse
I don't quite get what the problem is.... Are you stuck in CWM or can you boot into the rom?
If you're stuck in CWM and don't have a backup or any other rom to flash (why?), you can always sideload a rom using adb (if you are stuck in a CWM bootloop look here for help http://forum.xda-developers.com/showthread.php?t=2744482)
If you can boot back into the rom, follow my previous reply....
The only other option is to flash back to stock by following the tutorial here http://forum.xda-developers.com/showthread.php?t=2644083
[vertigo] said:
If you're stuck in CWM and don't have a backup or any other rom to flash (why?), you can always sideload a rom using adb (if you are stuck in a CWM bootloop look here for help http://forum.xda-developers.com/showthread.php?t=2744482)
Click to expand...
Click to collapse
Can't boot back to the ROM, I have stock ROM downloaded on hard drive, but I thought if I make a mistake, I would easily copy it to internal memory, and install it from there. Problem is that I cant, adb devices is showing nothing, so I can't use shell to copy ROM.
nesharm said:
Can't boot back to the ROM, I have stock ROM downloaded on hard drive, but I thought if I make a mistake, I would easily copy it to internal memory, and install it from there. Problem is that I cant, adb devices is showing nothing, so I can't use shell to copy ROM.
Click to expand...
Click to collapse
Well it looks like the only option is to go back to stock from the link I posted and start again, but make sure you've got everything on your phone you need before trying anything... Also trust me CM11 isn't worth bothering with just yet as there is a lot of issues with it, but I'm sure it will get there as PlayfulGod is working on it
[vertigo] said:
Well it looks like the only option is to go back to stock from the link I posted and start again, but make sure you've got everything on your phone you need before trying anything... Also trust me CM11 isn't worth bothering with just yet as there is a lot of issues with it, but I'm sure it will get there as PlayfulGod is working on it
Click to expand...
Click to collapse
Tnx for help, but I spent 4 hours trying to solve why I can't reach internal memory. At the end, LG drivers weren't working, so I pushed manually to set it as ADB port , and finally found the phone through adb devices command. After that, returning stock was easy. Now, I'm on CM11, thanx on those links, combining with one more thread and the problem is solved.