Hi
First, I've to thank Doixanh for his great Rom, GingerDX. He had make a good job. I love this rom.
So, I've just a problem when someone call me, the phone is ringing but the call screen lag for 1 to 2 seconds before i can see it.
Call Me Louder is allready disabled. Anyone can help ?
Thank you
Ladalgigi
Aint tried that one but I think its because of undervolt try to disable it and see if it goes away
Sent from my E15i using xda premium
it lags if you use stock kernel+gingerdx
flash alfs06 and it will be ok
hi
thanx for your replies. I'll try as soon as possible and give u the answer
ladalgigi
Well, even in another kernel I have the screen delay.
The only thing that solves at least for me is to set minCPU to 245 MHz.
Well i am using alfs v06 and no probs so far,, mayb it has something to do with the stock kernel ? try switching to custom kernels,, but i have asked around a lot of people who use stock kernel, They said They didn't have such a problem,, than again some said that they did face this problem ,, so im kinda confused
Hi
I solved the problem ! I flash alfs kernel and everything is alright !
Thanx for your help
Ladalgigi
lags screen in incoming call is because call mee lauder in dx setings disable this option and its ok try this
Hi
It was already disabled and lag screen continue but now with alfs kernel it's ok
Thanx
ladalgigi
Related
Hi! I unlocked bootloader and installed naaKernel v08. im happy with it but im having one issue. Sometimes (like 1 time per day) my screen "overlapps" like in the image bellow, after i reboot phone its ok though. Is anyone having this problem too?
Thank you
Have you tried fullwipe? Perhaps it's not about Karnel!
Sent from my E15i using XDA App
which rom have you? i think this is rom problem
what is the ROM you are using?may be it's a problem with the launcher too as I think.do you use SE thing as in the photo
It happened with both MiniCM7 and GingerXperiaRay both latest version and with full wipes beetween instaling roms. I think its a kernel bug also because when i installed this kernel i had stock rom and CWMRecovery had this "cuts" in the screen too.
Im thinking of changing to GDX with Alfs kernel though i like GingerRay =s
Same thing happened to me in the Recovery with Naa v08.
It's a kernel bug, you'll have to endure it...
Or try an other kernel like Alfs or linuxDX with an other ROM
Sent from my E15i using XDA App
dragxr said:
Hi! I unlocked bootloader and installed naaKernel v08. im happy with it but im having one issue. Sometimes (like 1 time per day) my screen "overlapps" like in the image bellow, after i reboot phone its ok though. Is anyone having this problem too?
Thank you
Click to expand...
Click to collapse
Enable boot animation in options.
In another thread nAa say this as a cure
I have the same proble after flashing nAa7 to nAa8
Sent from my E15i using XDA App
No more screen cuts since i activated boot animation =D
Hi guys ... have a big problem and i need fast answer... ok lets start...
I have gingerdx v021 and kernel Alfs05...update too... then i put USB in phone and then my circle stoped and phone got restart ... need fast answer rly before everything good now when i install update stopped!
try to use nAa v8 kernel....
I'm sure it will better
nelikp said:
try to use nAa v8 kernel....
I'm sure it will better
Click to expand...
Click to collapse
wifi don't worK omfgggggggggggggggggggggggggg -.-'
fenixcro said:
wifi don't worK omfgggggggggggggggggggggggggg -.-'
Click to expand...
Click to collapse
what happened??
i mean using nAa kernel it cause your wifi doesn't work???
Common....!!
NoBodyAtall will pissing away if his read your post man...
here my advice
1-flash nAa kernel again (v7 or v6)
2-if still got a problem just use stock kernel
Hi,
I am using W8 and using the custome ROM GingerXperia V22 which is beautiful and i really like it. Only thing i am having issue is the call screen lag, When i receive the call or call a contact,all i see is a black screen for couple of seconds. Any idea how to overcome this?
its because you use stock kernel+gingerxperia. same happens with stock+gingerdx
flash alfs06 kernel which i believe is compatible with both ROMS: gingerxperia and gingerdx
i have that problem to with v22 and stock kernel. is there an solution without a custom kernel cause i am afraid of unlocking the bootloader cause chance of simlock and brick
whats your phone date? if it is less than 11W29 and you know to read a few steps in english, you will be fine
pesky_89 said:
whats your phone date? if it is less than 11W29 and you know to read a few steps in english, you will be fine
Click to expand...
Click to collapse
You are right it just seems to be very hard, but after all it takes only 5 minutes to unlock and install custom kernel....i know it coz iv just do it...
you could try apps from the market like Go Contacts ...works well for me!
V23 update
Mi new version is update
flash alfs kernel..
it solves the problem
Can you pls put the link where i can know how to flash the kernels?? tks for the reply.
ghost9685 said:
Can you pls put the link where i can know how to flash the kernels?? tks for the reply.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1340861 - ALFS
http://forum.xda-developers.com/showthread.php?t=1350484 - NAA
please make use of the SEARCH BUTTON next time...
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
i restore my x8 with seus before every rom change
przemek4113 said:
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
Click to expand...
Click to collapse
yes i like alfs kernel and gingerdx & gingerxperia, but gingerxperiaray is the best for me but i have this problems
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
proN1low said:
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
Click to expand...
Click to collapse
Ya, it was the problem with the kernel version 08b
but now version 09 has been released...and the issue has been fixed i myself using it...
wilbso said:
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
Click to expand...
Click to collapse
yes i tried
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
hi i followed your post but i does'nt work for me and
it bootloops, sometimes it stuck at nAa kernel logo.
this couple week,, i hv this problem..
its never happen b4..
idk why its happen..
my kernel is nAa 11
proN1low said:
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Click to expand...
Click to collapse
I believe MiniCM7 2.1.9 is out, alongside nAa 11 kernel. The ROM has been thoroughly used by the community and most issues thrashed out. That's asides being a vast improvement over MiniCM7 2.1.6
I suggest you upgrade.
Hello there, i have a problem with gingerDx v29, im using v28 atm with alfs v09a, so far so good, but when i instal v29 i get a com.android.phone error as soon as i put the ping and then the error keeps looping. i tryed re-instal, wipe data, (wipe everything that i could with CMW actualy) but it still doesnt work, i read the forum in order to find an answer but didnt find it with this SO, (also tryed a solution that seams to work in others so like fix permisions). How do i solve this?
I really hate to bother but its been 5 days and i can make it work.
Thanks in advance!
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
update Ginger DX v29
Hello i am a new user asking about the update of DX v29. i recently purchased X8 having
Configuration .
Model no E15i ,
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
it worked!
playjun said:
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
Click to expand...
Click to collapse
thanks man, that was the problem, i cant belive i didnt saw that, thanks a lot
And for the guy asking a guide this is what i did:
download the alfs v09a kernel right in the rom page
download the rom
download the libsensor patch
download the addon
put the rom, the libsensor patch and the addon in ur sd card
flash the kernel
start in cwm
go to instal zip option, instal the rom, the libsensor and the addon
restart
enjoy
i just did it and its working fine but im finding a strange bug though, my screen seams to be moving a little bit to the left everytime :X
when i fix it i let you know how xD
Thanks again to playjun _o_
(Q) overclock in GingerDX V29 dont work?
Hi, I was trying to place GingerDX v29 overclock and does not work, any suggestions?
sorry my english,
problem
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Answer
terrordroid said:
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Click to expand...
Click to collapse
open it by touching the screen on the Sony Ericsson logo.
GingerDX v029 version selection help
First of all thanx to all
by reading a lot of stuff in this forum .successfully root the phone and install xrecovery and its working .
but i have some confusion about the
[
1 .GingerDX-v029-shakira-stock.zip GingerDX v029 nAa/alfs
2. GingerDX-v029-robyn.zip GingerDX v029 for robyn
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
The confusion is which one is for my xperia X8 .
Please help me for this My xperia configuration is
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
Hey man... ur x8 also knwn as shakira... use that rom
Sent from my X8 using xda app-developers app
stone009 said:
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
Click to expand...
Click to collapse
get the number 3 (i think your still in lock bootloader) and dont forget the addons.and read the standard procedure.goodluck
sent from my x8™ using gingerDX®
The diferent versions are for diferent kernels, for example im using Alfs kernel so i instal the number 1, i think u still using stock kernel so instal the stock one, the number 3
if you have any problems you can allways find the default rom and flash it back or try another one
Good luck
need help
(3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2 is for my x8 .
do i need the update Kernel version ?
or its work on my original configuration as below
My xperia X8 configuration is
Rooted by Superoneclick.
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
get that number 3
and addon( standard settings for stock and superuser ) and read some fix in the thread...
opps your on 11w22?
read a bit about unlocking bootloader.
sent from my x8™ using gingerDX®
alfs v9a
im having a little screen moving problem, i think its the kernel alfs v9a, i'll try v8 and let you know
Edit; Alfs v8a solves the problem
Hey guys i'm having the same problem with the screen moving bug, it moves to the right a little bit. I tried alfs v8 and it solved the problem but I still don't think it's the best answer since the combo gdx v29 and alfs v8 has A LOT of battery drain on 3g and sync on (in 8 hours it drains 90 percent of the battery just in standby).
Is there any other thing I can do to fix this screen problem? If not i'll just go back to stock kernel
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
cascabel said:
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
Click to expand...
Click to collapse
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Sorry. I meant 691.
Sent from my rooted tomato using xda app
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Try other frequencies
Sent from my X8 using xda premium