Database Develop

Need Rom for i9001 plus...

hello,
wish all here a happy xmas. sorry for my bad english but i hope that i can explain my problem.
I cant find the right firmware in your list.
what i need is a brandingfree firmware. sorry but iam a noob
firmware is 2.3.5
Baseband I9001XXKPF (this what i cant find)
wed-sep-28/KST2011
csc- 9001/XEGKP2
you need more ?
and question is : which custom firmware are pos. ?
hope u can help me
lg marc

You should be able to flash any custom firmware, like Performance Edition RC2 or Cranium Rom. If you want just the stock unbranded firmware, you can flash last one on the list - 2.3.6 XXKPS. I don't know what language are you using on your phone, if it is not English, pay attention to that as well - you'll find all info in relevant threads.

@tomi555,
I flashed the regular 2.3.6 yesterday.with odin very simple and easy. like 10 minutes.
I need a custom firmware a mixed between speed and akku protection.
anybody an idea ??
lg gyver

Well I can recommend you try Performance Edition RC2, it is currenty in beta, you can wait a day or two for the final release. If you are going to install beta, be sure to change CPU governor to smartass v2. Final version will have that enabled by default. It is really fast with good battery life and no bugs (but you can have small issues with installation). You will really see a difference compared to stock rom
Or you can try Cranium rom, but I haven't tested it, seems it currently has a problem if you want to set mp3 as a ringtone. Other than that it seems to be great if you want to overclock your CPU. I don't have such needs so I'm not using it.

thx tomi
ok I have the rc4 now. but how I can update to rc6 or rc5 ?? Is it pos. to run rc6 on my i9001 ??
pls help
thx gyver

You mean Cranium RC6, of course it is possible, you can download the Odin one package from their website.
http://sakindia123.prophecy.li/
For other questions, info and installation tips check out its thread.
http://forum.xda-developers.com/showthread.php?t=1313650

thx soooo much.
I used this thread to flash to rc4.
Installation:
Installation for RC6(comin' up)
*Recovery Package (Now,easy to install!)
1)Install FeaMod Recovery
2)boot into recovery mode
3)Flash Cranium Rom
4)dont wipe cache.............and fix permssions!
thats all for update up to rc6 ???
lg gyver

Yes, I believe that's the method if you downloaded
Cranium Rom RC6 (CWM Version)
You can flash it via Odin MultiDownloader from your computer just like the stock rom if you download
Cranium Rom RC6 (Odin Version by nikagl)
But... like I said I don't have that ROM so perhaps better double-check / ask in that thread

I dont know how I can install Feamod Recovery.
If I have it to flash with odin ?? where is the ariesve file ?
or can I use the same as to flash the rom ?
lg gyver

got it.
damn this is very cool. thx to the hole xda team.
@tom special thx to u
lg gyver

Andro-ID V3.3-RC3

General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.

Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.

older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2

Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil

strange problem when i try to install this .nb0 it says some kind of error using sut

Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.

Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.

[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom

Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App

Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(

orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.

Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3

hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem

Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!

Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2

I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA

Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA

Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA

bravida engine
does bravida engine work on this room

SUT LR 1.8.2 does not detect phone

hi am on Bumblebee 101-3 rom. recently when codename rom came i thought of flashing dt rom which is ICS rom for our device mi410 ( ideos x6 ).
first step for flashing Codename is to flash Sharp 2.3.5 rom but when i connect my cell to pc via USB SUT LR 1.8.2 does not detect my cell phone now...
anyone please suggest a wayout. i wanna try some ICS goodness soon....

first : u ensure drivers installed for the mobile pls search forum for the drivers download link
second : phone needs to be connected in download mode i.e. volume up and power button.
wait for few seconds.
sut will detect now.

I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...

ezio2 said:
I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...
Click to expand...
Click to collapse
flash cwm 5.0.2.7......
how did you do that.

ezio2 said:
I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...
Click to expand...
Click to collapse
At that point, you have to re flash sharp rom again

My idea was to flash Codename rom... m on Codename ryt nw... I flashed rc3 wch is pre rooted ...
FC Barcelona are Copa Del Rey Champs..

reversegear said:
flash cwm 5.0.2.7......
how did you do that.
Click to expand...
Click to collapse
i only tried ... i tried with both cwm 5.0.2.7 nd wid its Full Touch version... both i took frm Kshitij's Roll Up Thread in Development section...
but was unsuccessful then on Haree's suggestion i flashed RC3 using SUT LR 1.8.2 which is pre rooted nd allowed me to boot in recovery nd cmplt remaining steps required to flash Codenam ICS rom by elol....

ezio2 said:
i only tried ... i tried with both cwm 5.0.2.7 nd wid its Full Touch version... both i took frm Kshitij's Roll Up Thread in Development section...
but was unsuccessful then on Haree's suggestion i flashed RC3 using SUT LR 1.8.2 which is pre rooted nd allowed me to boot in recovery nd cmplt remaining steps required to flash Codenam ICS rom by elol....
Click to expand...
Click to collapse
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade

reversegear said:
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade
Click to expand...
Click to collapse
i ll do dt whnevr m free.. i hv my exams goin on.... i ll consider ur words...

reversegear said:
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade
Click to expand...
Click to collapse
here
Elementary Watson(just kidding)
1.Use the new 1.8 Sutlr from ur PC
2.connect ur phone in download mode(Ie power ON + volume up)
(chose erase all data in the drop down box in Sutlr this will not erase ur SD data)
3.Flash Rc3 using the same
4.Download and put the codename Rom on the root of ur SD(Not in any folder)
6.Use CWM and Flash the update zip
and enjoy ur new ROM

haree said:
here
Elementary Watson(just kidding)
1.Use the new 1.8 Sutlr from ur PC
2.connect ur phone in download mode(Ie power ON + volume up)
(chose erase all data in the drop down box in Sutlr this will not erase ur SD data)
3.Flash Rc3 using the same
4.Download and put the codename Rom on the root of ur SD(Not in any folder)
6.Use CWM and Flash the update zip
and enjoy ur new ROM
Click to expand...
Click to collapse
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.

reversegear said:
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.
Click to expand...
Click to collapse
hi
the pleasure is mine dear always willing to help in any way i can
and u can also just press the thanks button to say thanks its easier
I really dont care this is just fyi...

reversegear said:
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.
Click to expand...
Click to collapse
1 also needs set of " gapps-ics-20120429-signed " along wid Updated Codename build... u flash both after wiping data/factory reset, wipe cache, wipe dalvik cache nd i personally prefer wiping battery stats [ both in advance settings of CWM ]...
when u r done with it power off the device nd boot it... be patient may take a minute or so in booting up... [ htc splash screen looks bad to me ]
finalize ur settings , recover ur apps....
this is the time if u wanna use the custom bootanimation save in sd root.
power off the device again ... boot in recovery install zip from sdcard....
this would be ur fresh boot...
& u ll b gud 2 go....

ezio2 said:
hi am on Bumblebee 101-3 rom. recently when codename rom came i thought of flashing dt rom which is ICS rom for our device mi410 ( ideos x6 ).
first step for flashing Codename is to flash Sharp 2.3.5 rom but when i connect my cell to pc via USB SUT LR 1.8.2 does not detect my cell phone now...
anyone please suggest a wayout. i wanna try some ICS goodness soon....
Click to expand...
Click to collapse
I thing you need to flash rc3 room flash and on YouTube you can find same video for how to install and if you computer require some drivers you need check also check you must using 32 bit computer..
Sent from my Desire HD using xda premium

rockakhtar said:
I thing you need to flash rc3 room flash and on YouTube you can find same video for how to install and if you computer require some drivers you need check also check you must using 32 bit computer..
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
yea i flashed rc3 using SUT LR 1.8.2 ... flashed Codename accordingly... stayed 4 a day.. ws facing issues with camera so now agn on BumbleBee .. this tym on 102 update...

Use 3 party service for camera like dc, 360, illusion.. I hope that will work
Sent from my CSL-MI410 using xda premium

rockakhtar said:
Use 3 party service for camera like dc, 360, illusion.. I hope that will work
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
nothing works in dt update.... may work in the next codename update... 15/5/2012 was the promised update n v hvnt received it yet.....

reversegear said:
first : u ensure drivers installed for the mobile pls search forum for the drivers download link
second : phone needs to be connected in download mode i.e. volume up and power button.
wait for few seconds.
sut will detect now.
Click to expand...
Click to collapse
Hey where can i get the drivers.. As i m facing the same problem.....

gautam.is.sharma said:
Hey where can i get the drivers.. As i m facing the same problem.....
Click to expand...
Click to collapse
chk da link here....
http://forum.xda-developers.com/showthread.php?t=1535442&highlight=usb+driver

[Q] [KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP

[KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP....
need help on how to install this ROM?
Cn anyone help me step by step?
here's the link
http://forum.xda-developers.com/showthread.php?t=1728461
this is my phone detail
android version = 2.3.5
baseband version = PR323
Kernel Version = Apps_2.6.35.7 -perf

Bro mentioned link for kernel ....????
Not for rom ...
If you want flash kernel only so can flash it ....
Just download the link ...... but its ics kernel and you are using GB ..... first u need to upgrade in ics rom ....
Sent from my FIH-FB0 using xda premium

so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
First you need SUT LR 1.8.2. Link to SUT LR which worked for me.
Then you need to download Andro-id V3.3 RC3.
Link to the post
Direct link to the ROM
Flash the ROM with SUT LR. Here is a easy to understand video made by ̶H̶a̶r̶e̶e̶ leoaeries.
Hit thanks to leoaeries H̶a̶r̶e̶e̶ , if the video helped you.
After installation, you will have CWM installed by default
Go ahead and flash ROMs of your choice (be careful you can only install .35 kernel ROM, if you need to try .32 kernel roms you need to downgrade to Gingerbread 2.3.x stock, looks like your stock is .35)
Try ICS CM9, IceColdSandwich or MIUI V4 ROMs, you will like it :laugh:
Welcome to the Android, the world of unlimited possibilities and great user support.

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know

elol said:
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know
Click to expand...
Click to collapse
I think for QA should be in here, dev section is for development things like bugs report and solving.

[Q] To: GUNDUL46 have a question

AOKP 8.8 (Lord ClockaN) UPDATE
AOKP-8.8 Update V2
here is a question :how to flash this rom ?from <RC3> or just install <IceColdSandwich-8.8.AOKP-FB0_v2>.(Start from where)
i don't know cuz i newbie,plese detailed teach me :victory:
THANK YOU:good:

Rokanio said:
AOKP 8.8 (Lord ClockaN) UPDATE
AOKP-8.8 Update V2
here is a question :how to flash this rom ?from <RC3> or just install <IceColdSandwich-8.8.AOKP-FB0_v2>.(Start from where)
i don't know cuz i newbie,plese detailed teach me :victory:
THANK YOU:good:
Click to expand...
Click to collapse
please give us the detail of
1. Current rom
2. Kernel version

reversegear said:
please give us the detail of
1. Current rom
2. Kernel version
Click to expand...
Click to collapse
i;m using Mi410,official rom 2.3.4,kernal <Apps_2.6.32.9-perf>

Rokanio said:
i;m using Mi410,official rom 2.3.4,kernal <Apps_2.6.32.9-perf>
Click to expand...
Click to collapse
download SUT LR ,mi410 drivers,andro id rc3 rom,custom recovery v5,and Aokp 8.8 rom. every thing is availabe in the forum search for it pls dont ask for links.
install sut lr in PC
connect the phone in download mode
install drivers
flash RC3 rom.
after flashing rc3 your kernel will be changed to 2.6.35
change stock recovery to cwm recovery v5 in download mode by connecting to pc.
enter into recovery mode ( vol + ,vol- , power button)
flash aokp 8.8 in cwn recovery
clear cache and clear dalvik
done you will be running on aokp rom
every detailed procedure is in the forum please take your time and read

reversegear said:
download SUT LR ,mi410 drivers,andro id rc3 rom,custom recovery v5,and Aokp 8.8 rom. every thing is availabe in the forum search for it pls dont ask for links.
install sut lr in PC
connect the phone in download mode
install drivers
flash RC3 rom.
after flashing rc3 your kernel will be changed to 2.6.35
change stock recovery to cwm recovery v5 in download mode by connecting to pc.
enter into recovery mode ( vol + ,vol- , power button)
flash aokp 8.8 in cwn recovery
clear cache and clear dalvik
done you will be running on aokp rom
every detailed procedure is in the forum please take your time and read
Click to expand...
Click to collapse
ok,i will~:laugh:thx bro,:good:

:thumbup:
Sent from my Axioo-Vigo410 using xda app-developers app