Database Develop

[q] help installing rocket rom

hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.

abhi29021992 said:
hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.
Click to expand...
Click to collapse
Go back in recovery, wipe data/factory reset, wipe cache and dalvik cache, reflash the rom and reboot, that should do it

it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?

abhi29021992 said:
it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?
Click to expand...
Click to collapse
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up

gee2012 said:
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up
Click to expand...
Click to collapse
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?

abhi29021992 said:
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?
Click to expand...
Click to collapse
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.

jambamkin said:
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.
Click to expand...
Click to collapse
Thnx ...........

Moved To Q&A​
Please post all questions in the Q&A section​

SUT LR 1.8.2 does not detect phone

hi am on Bumblebee 101-3 rom. recently when codename rom came i thought of flashing dt rom which is ICS rom for our device mi410 ( ideos x6 ).
first step for flashing Codename is to flash Sharp 2.3.5 rom but when i connect my cell to pc via USB SUT LR 1.8.2 does not detect my cell phone now...
anyone please suggest a wayout. i wanna try some ICS goodness soon....

first : u ensure drivers installed for the mobile pls search forum for the drivers download link
second : phone needs to be connected in download mode i.e. volume up and power button.
wait for few seconds.
sut will detect now.

I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...

ezio2 said:
I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...
Click to expand...
Click to collapse
flash cwm 5.0.2.7......
how did you do that.

ezio2 said:
I ll do it it at lunch... will let u know...
Thnks nw m on Sharp 2.3.5 but as i told u dt i wanna try Codename; i tried to flash cwm 5.0.2.7 recovery did it ryt.. The moment i tried to boot into recovery i cud see a blue screen with nothing written on it after SHARP logo..
how do i get pass this stage ???
Chelsea got lucky.... Cech is accompanied by Angels sitting on goal posts...
Click to expand...
Click to collapse
At that point, you have to re flash sharp rom again

My idea was to flash Codename rom... m on Codename ryt nw... I flashed rc3 wch is pre rooted ...
FC Barcelona are Copa Del Rey Champs..

reversegear said:
flash cwm 5.0.2.7......
how did you do that.
Click to expand...
Click to collapse
i only tried ... i tried with both cwm 5.0.2.7 nd wid its Full Touch version... both i took frm Kshitij's Roll Up Thread in Development section...
but was unsuccessful then on Haree's suggestion i flashed RC3 using SUT LR 1.8.2 which is pre rooted nd allowed me to boot in recovery nd cmplt remaining steps required to flash Codenam ICS rom by elol....

ezio2 said:
i only tried ... i tried with both cwm 5.0.2.7 nd wid its Full Touch version... both i took frm Kshitij's Roll Up Thread in Development section...
but was unsuccessful then on Haree's suggestion i flashed RC3 using SUT LR 1.8.2 which is pre rooted nd allowed me to boot in recovery nd cmplt remaining steps required to flash Codenam ICS rom by elol....
Click to expand...
Click to collapse
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade

reversegear said:
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade
Click to expand...
Click to collapse
i ll do dt whnevr m free.. i hv my exams goin on.... i ll consider ur words...

reversegear said:
Congrats for successful flashing of codename by elol best ICS till date for our device.
why don't u give a HOW TO post (if u r free enough) for the problem solved by u, it will help newbies. I'm bit busy else I would have made.
because most of the people confused between kernal .32 and .35 upgrade and downgrade
Click to expand...
Click to collapse
here
Elementary Watson(just kidding)
1.Use the new 1.8 Sutlr from ur PC
2.connect ur phone in download mode(Ie power ON + volume up)
(chose erase all data in the drop down box in Sutlr this will not erase ur SD data)
3.Flash Rc3 using the same
4.Download and put the codename Rom on the root of ur SD(Not in any folder)
6.Use CWM and Flash the update zip
and enjoy ur new ROM

haree said:
here
Elementary Watson(just kidding)
1.Use the new 1.8 Sutlr from ur PC
2.connect ur phone in download mode(Ie power ON + volume up)
(chose erase all data in the drop down box in Sutlr this will not erase ur SD data)
3.Flash Rc3 using the same
4.Download and put the codename Rom on the root of ur SD(Not in any folder)
6.Use CWM and Flash the update zip
and enjoy ur new ROM
Click to expand...
Click to collapse
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.

reversegear said:
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.
Click to expand...
Click to collapse
hi
the pleasure is mine dear always willing to help in any way i can
and u can also just press the thanks button to say thanks its easier
I really dont care this is just fyi...

reversegear said:
haree here the thing is many are confused between .32 and .35 kernal change over.
thank u for ur step by step guide. cheers.
Click to expand...
Click to collapse
1 also needs set of " gapps-ics-20120429-signed " along wid Updated Codename build... u flash both after wiping data/factory reset, wipe cache, wipe dalvik cache nd i personally prefer wiping battery stats [ both in advance settings of CWM ]...
when u r done with it power off the device nd boot it... be patient may take a minute or so in booting up... [ htc splash screen looks bad to me ]
finalize ur settings , recover ur apps....
this is the time if u wanna use the custom bootanimation save in sd root.
power off the device again ... boot in recovery install zip from sdcard....
this would be ur fresh boot...
& u ll b gud 2 go....

ezio2 said:
hi am on Bumblebee 101-3 rom. recently when codename rom came i thought of flashing dt rom which is ICS rom for our device mi410 ( ideos x6 ).
first step for flashing Codename is to flash Sharp 2.3.5 rom but when i connect my cell to pc via USB SUT LR 1.8.2 does not detect my cell phone now...
anyone please suggest a wayout. i wanna try some ICS goodness soon....
Click to expand...
Click to collapse
I thing you need to flash rc3 room flash and on YouTube you can find same video for how to install and if you computer require some drivers you need check also check you must using 32 bit computer..
Sent from my Desire HD using xda premium

rockakhtar said:
I thing you need to flash rc3 room flash and on YouTube you can find same video for how to install and if you computer require some drivers you need check also check you must using 32 bit computer..
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
yea i flashed rc3 using SUT LR 1.8.2 ... flashed Codename accordingly... stayed 4 a day.. ws facing issues with camera so now agn on BumbleBee .. this tym on 102 update...

Use 3 party service for camera like dc, 360, illusion.. I hope that will work
Sent from my CSL-MI410 using xda premium

rockakhtar said:
Use 3 party service for camera like dc, 360, illusion.. I hope that will work
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
nothing works in dt update.... may work in the next codename update... 15/5/2012 was the promised update n v hvnt received it yet.....

reversegear said:
first : u ensure drivers installed for the mobile pls search forum for the drivers download link
second : phone needs to be connected in download mode i.e. volume up and power button.
wait for few seconds.
sut will detect now.
Click to expand...
Click to collapse
Hey where can i get the drivers.. As i m facing the same problem.....

gautam.is.sharma said:
Hey where can i get the drivers.. As i m facing the same problem.....
Click to expand...
Click to collapse
chk da link here....
http://forum.xda-developers.com/showthread.php?t=1535442&highlight=usb+driver

[Q] [KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP

[KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP....
need help on how to install this ROM?
Cn anyone help me step by step?
here's the link
http://forum.xda-developers.com/showthread.php?t=1728461
this is my phone detail
android version = 2.3.5
baseband version = PR323
Kernel Version = Apps_2.6.35.7 -perf

Bro mentioned link for kernel ....????
Not for rom ...
If you want flash kernel only so can flash it ....
Just download the link ...... but its ics kernel and you are using GB ..... first u need to upgrade in ics rom ....
Sent from my FIH-FB0 using xda premium

so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
First you need SUT LR 1.8.2. Link to SUT LR which worked for me.
Then you need to download Andro-id V3.3 RC3.
Link to the post
Direct link to the ROM
Flash the ROM with SUT LR. Here is a easy to understand video made by ̶H̶a̶r̶e̶e̶ leoaeries.
Hit thanks to leoaeries H̶a̶r̶e̶e̶ , if the video helped you.
After installation, you will have CWM installed by default
Go ahead and flash ROMs of your choice (be careful you can only install .35 kernel ROM, if you need to try .32 kernel roms you need to downgrade to Gingerbread 2.3.x stock, looks like your stock is .35)
Try ICS CM9, IceColdSandwich or MIUI V4 ROMs, you will like it :laugh:
Welcome to the Android, the world of unlimited possibilities and great user support.

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know

elol said:
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know
Click to expand...
Click to collapse
I think for QA should be in here, dev section is for development things like bugs report and solving.

ClockworkMod Recover on e3 recovery galaxy s

I have a 2.3.6 rom stock , on galaxsy s whit 3e recovery.
I cant install ClockworkMod .
any ideea ? or a recomended kernel whit cwm .
i only have odin cant do adb .. etc..
10x
or a 4.0 version of the andraoid whit odin instalation ....

Kernel
razvanmarius2k5 said:
I have a 2.3.6 rom stock , on galaxsy s whit 3e recovery.
I cant install ClockworkMod .
any ideea ? or a recomended kernel whit cwm .
i only have odin cant do adb .. etc..
10x
or a 4.0 version of the andraoid whit odin instalation ....
Click to expand...
Click to collapse
You would get the kernel here:
http://forum.xda-developers.com/showthread.php?t=788108
Gopala Subramanium
http://www.FixMyStuff.In
Facebook: http://www.facebook.com/gopala.subramanium | Twitter: @sgopala

Search cf root for your firmware, flash in Odin

gopalasubramanium said:
You would get the kernel here:
http://forum.xda-developers.com/showthread.php?t=788108
Gopala Subramanium
http://www.FixMyStuff.In
Facebook: http://www.facebook.com/gopala.subramanium | Twitter: @sgopala
Click to expand...
Click to collapse
10x worked great !!!!

Same Exact Problem
razvanmarius2k5 said:
10x worked great !!!!
Click to expand...
Click to collapse
Hi, I have the same phone and the same stock rom 2.3.6 and went to the page they gve you here... but which of that kernels should I use? there's a list of kernels and want to know which one worked for you... thanks

R4f said:
Hi, I have the same phone and the same stock rom 2.3.6 and went to the page they gve you here... but which of that kernels should I use? there's a list of kernels and want to know which one worked for you... thanks
Click to expand...
Click to collapse
give us ur build number, fone version, android version n any necessary info.
Sent from my GT-I9000 using xda app-developers app

Similar error.
I have the same problem. I tried to use a CF kernel, but the one for build "gingerbread.DDJVB" didn't work and I followed the steps in this thread "http://forum.xda-developers.com/showthread.php?t=1805526" (Second post.).
The flashing was successful and it installed CWM and superuser but whenever I boot into recovery, it ends up in android recovery 3e instead of CWM. I ultimately want to use the latest nightly rom for android 4.2.2. Is there a way for me to get into CWM? Or maybe get the rom without using CWM?

AlchemistK said:
I have the same problem. I tried to use a CF kernel, but the one for build "gingerbread.DDJVB" didn't work and I followed the steps in this thread "http://forum.xda-developers.com/showthread.php?t=1805526" (Second post.).
The flashing was successful and it installed CWM and superuser but whenever I boot into recovery, it ends up in android recovery 3e instead of CWM. I ultimately want to use the latest nightly rom for android 4.2.2. Is there a way for me to get into CWM? Or maybe get the rom without using CWM?
Click to expand...
Click to collapse
of course, see step 14 in da second post da word "rooted with original kernel"
why dont u flash jvu based?
read here for more detail
http://forum.xda-developers.com/showthread.php?t=2149455
n.....i juz wanna ask........if u wanted da cwm recovery for flashing n not stock rooted kernel, why do u proceed to step 14? u juz need to stop at step 8 n use semaphore kernel instead of flashing stock kernel back after step 8 on ur link...:what:
Sent from my GT-I9000 using xda app-developers app

[Q] How do i know

i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!

rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.

nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .

rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.

nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !

rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...

ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??

rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules

To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps

Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/