Related
For the most part I was just looking for the wifi tether app. So I did one click root and everything was still good. Downloaded rom manager, everything was still good, installed the clockworkmod. Phone rebooted and I had to do the update thing. Phone rebooted, still good. Installed busybox and lost the ability to usb tether my phone. Removed the busybox and got tether back. Downloaded the beast update and told rom manager to reboot into recovery and installed update, rebooted, update didn't take, did it again and still nothing. Finally booted phone and manually entered recovery mode and ran update. This one took. Now I go to try run the wifi app and it force closes. Tried to run super user app, force close. Tried to run rom mananger to restore last backup and super user fails there too. Any ideas?
parttimer428 said:
For the most part I was just looking for the wifi tether app. So I did one click root and everything was still good. Downloaded rom manager, everything was still good, installed the clockworkmod. Phone rebooted and I had to do the update thing. Phone rebooted, still good. Installed busybox and lost the ability to usb tether my phone. Removed the busybox and got tether back. Downloaded the beast update and told rom manager to reboot into recovery and installed update, rebooted, update didn't take, did it again and still nothing. Finally booted phone and manually entered recovery mode and ran update. This one took. Now I go to try run the wifi app and it force closes. Tried to run super user app, force close. Tried to run rom mananger to restore last backup and super user fails there too. Any ideas?
Click to expand...
Click to collapse
This doesn't belong in development.
I would suggest you flash back to stock using Odin.
parttimer428 said:
For the most part I was just looking for the wifi tether app. So I did one click root and everything was still good. Downloaded rom manager, everything was still good, installed the clockworkmod. Phone rebooted and I had to do the update thing. Phone rebooted, still good. Installed busybox and lost the ability to usb tether my phone. Removed the busybox and got tether back. Downloaded the beast update and told rom manager to reboot into recovery and installed update, rebooted, update didn't take, did it again and still nothing. Finally booted phone and manually entered recovery mode and ran update. This one took. Now I go to try run the wifi app and it force closes. Tried to run super user app, force close. Tried to run rom mananger to restore last backup and super user fails there too. Any ideas?
Click to expand...
Click to collapse
Post in Q&A
You removed busybox which is necessarily for many rooted apps, hence you get a lot of FCs
Sent from my SAMSUNG-SGH-I897 using XDA App
Seriously do you just think in Q&A they just talk about glitter and shoes? You don't need to goto development to get a technical answer lol
Sent from my SAMSUNG-SGH-I897 using XDA App
fatttire said:
Seriously do you just think in Q&A they just talk about glitter and shoes? You don't need to goto development to get a technical answer lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Glitter, not so much.
But we can talk Ferragamo all day long.
fatttire said:
Seriously do you just think in Q&A they just talk about glitter and shoes? You don't need to goto development to get a technical answer lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why don't you pruds try to help and not criticize that is what is wrong with this Dev Forum God forbid if you all come down off your this is a dev forum.
It looks like you rooted twice with 2 different apps. Not sure what that would do bit it cant be good.
I would one click to stock, then run unleash the beast and be done with it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Moved to Q&A.
Thank for moving it to the correct forum, I guess I figured since it was a problem with something from dev that is where I should post, my bad. As for the rooting twice the post said it was ok if you were already rooted.
Ok, so I used the one click root and took it back, re ran unleash and still same problem. According to the post it should install busy box at the time of the installation. It didn't, I downloaded it but it won't install.
Thanks, I flashed back with odin. I was able to install the beast, however wifi tether continually crashes with force close. I tried to update with the new install but it still crashes.
parttimer428 said:
Thanks, I flashed back with odin. I was able to install the beast, however wifi tether continually crashes with force close. I tried to update with the new install but it still crashes.
Click to expand...
Click to collapse
Try master clearing
Sent from my SAMSUNG-SGH-I897 using XDA App
dpmurphy81 said:
Why don't you pruds try to help and not criticize that is what is wrong with this Dev Forum God forbid if you all come down off your this is a dev forum.
Click to expand...
Click to collapse
Dude. So let me get this straight. You don't like it when people just complain and don't help, and yet I helped (well, tried, sorry it didn't work lol) and then let loose a rant about posting in the right area, and then you complain and don't help.....???
Sent from my SAMSUNG-SGH-I897 using XDA App
Flashed back to stock with odin and did a master clear. Wifi tether still force closes
So i got cm7 on my phone last week and ever since i got it when i leave the phone on for more that 2 min the phone will just turn itself off and restart and show the cyanogenmod logo with the little android guy on the skateboard (same as once you turn on the device) and all the apps and everything is shut off. What is happening, is this normal?
Still looking for a solution
Flash back to stock to see if it does it there. Then reflash CM7.
Eyeronik said:
Still looking for a solution
Click to expand...
Click to collapse
Maybe you restored system data from a different ROM and it broke something. Flash back to stock and then follow the direction to a T on flashing CM7. Do not restore anything and see if you have the issue.
I used cm7 for 2 weeks to see what all the fuss is about. I had the problem you where describing. in my case it was caused by restoring too much stuff from titanium back up. follow the instructions and you shuld be fine.
After getting it working I did not like cm7 so I uninstalled it and went to the i9000 gingerbread based ROMs(I am using continuum) and dident look back.
Us cappy owners are fortunate to have such a rich developer community with so much to choose from.
Sent from my GT-I9000 using XDA Premium App
Yea this is the first rom i have put on it. I just got it a couple weeks ago. Im going to attempt to figure out how to flash back to stock. Thanks guys.
Move some apps to external and see if it still happens.
Sent from my SGH-I897 using XDA Premium App
WOW! HOLY CRAP THIS PLACE IS DEAD! Its been a while since I read around these Zio places. Yup, my ol Zio still bootlooped (its around here somewhere). I tried all the "guides" n zip's and skd's and all that other.....stuff, its koo gathering and installing stuff and gettin that lil rush of hope, but then one lil thing goes wrong or ain't in the step-by-step guied, BOOM- all bad, and nobody's around all of a sudden. Alot of HERE, TRY THIS POST FROM SO N SO (not for the Zio), GO TO BLAHBLAH.COM install that n profit (evil setup to rom someone's phone AND wipe it clean), BUT ITS ALL MY BAD, NEWBIE like me shouldn't mess with roots n roms. Don't get me wrong, if I can find somebody that would fix it for cash, id go back to my zio and chuck this HALLWIE A2 (whatever its called) to a dev. Well, I'm probly gona get smashed for posting this. DEEEEP BREATH........K, I FEEL BETTER NOW.
Now I'm soo broke I cant even pay attention!
What you need help on? Bootloop fix? I can help you. Pm me on the details. Could you still get into faatboot or recovery? What service sprint or cricket!?
Sent from my Zio using XDA App
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Not sure where it is but there was a fast boot zip of launcher apk. If you boot your phone into fast boot and cwm copy the zip to the phone and then flash the zip to your Zio it should resolve the issue
Sent from my Zio
Krsmqn said:
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Click to expand...
Click to collapse
I can make a launcher apk. flashable zip for ya,just let Me know.
Sent from my LG-P509 using xda premium
openZIO Rom issue
Hi, I just installed the openZIO 2.1.2 ROM. Everything worked fine, but after rebooting and going through the initial set up (i.e. the google user setup blahblah) the VTL Launcher continually force closes and I can't do anything but go back and recover my original boot.img has anyone else had this kind of issue? Any possible fixes? Any help would be appreciated, I know not to many people are in using the Zio forums anymore... but yeah.. Thanks in advance
Try Reflashing again
Sent from my LG-P509 using xda premium
I've actually already done that, and it's still doing the same thing. I've deleted and re-downloaded the ROM, and re-flashed it to my phone, and still having the same issue. VTL Launcher just continually force closes, and it sucks cause I've been waiting months to get to install the ROM cause I couldn't afford a new USB cord. I've read so much on this ROM and everything for the Zio and was excited to actually be able to overclock my phone, and get some pretty good performance boosts out of it. Now I got one, and can't get it to work.. what a sad day
Could you explain your steps when flashing?
Sent from my LG-P509 using xda premium
well I first move the .zip to the sd, then power down and boot up CWM, and "install from SD card" and once it's finished flashing, I reboot the phone. when it comes back up my kyocera logo comes back up and it takes me through the first-boot programming (google sign-in) and once I input my un/pw and sign in, it tells me that VTL had an error and must hit force close. and once I hit force close it continues to come up saying the same thing over and over again. so I rebooted my phone, still the same thing. SO I go back through and flash it back to my original boot.img. I have gone through and completely deleted the openZIO 2.1.2.zip file and re-downloaded it, and gone through the same steps to see if maybe it was just a bad file somehow. But to no avail, still having the same issues.
After you boot into cwm : wipe cache partition, then go into mounts and storage, format: system, data, cache :then go into advanced and wipe dalvick cache.
Now flash rom
Sent from my LG-P509 using xda premium
Ok just went through with what you had mentioned, and still getting the same results. "Sorry! The application VTL.Launcher (process android.process.acore) has stopped unexpectedly. Please try again. with the only option to force close. As soon as I force close, the same message pops up
Have you tryed flashing my rom?
I would try that, and see what happens.
You can always push a launcher with adb or Droid commander.
Sent from my LG-P509 using xda premium
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
XCmaster said:
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
Click to expand...
Click to collapse
Im outta suggestions, I think you might have a hardware problem, but can't be for sure on that.
I've never heard of anybody having that problem, let me know if you get the issue resolved
Sent from my LG-P509 using xda premium
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
XCmaster said:
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
Click to expand...
Click to collapse
Was your phone acting like that before you flashed openzio?
Sent from my LG-P509 using Tapatalk 2
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
XCmaster said:
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
Click to expand...
Click to collapse
I guess then its probably not a hardware issue.. hmm.. its almost Like the roms your flashing are getting corrupted some how.
Sent from my LG-P509 using Tapatalk 2
hmm.. .well maybe I'll format my sd and do a factory reset on the phone first, then try to flash the rom?
Everytime i start my camera and select second camera, it says it cant initialize and the app closes. I was rooted but flashed back to non rooted stock and still have this issue.. any idea how to fix??
Airo18 said:
Everytime i start my camera and select second camera, it says it cant initialize and the app closes. I was rooted but flashed back to non rooted stock and still have this issue.. any idea how to fix??
Click to expand...
Click to collapse
I had the same problem. My solution was to go to Verizon and get a replacement lol. Which rom were you using?
I was on the stock verizon rom
D you tried the SBF from @chaoticweaponry thread¿? I havent had this issue but i imagine that you should replace every bit of partition/ info...
I had an unrelated i cant switch to cdma anymore which was repaired by SBFing
I will look for the post later if you cant find It
edited
----------------------------------
http://forum.xda-developers.com/showthread.php?t=1339816&highlight=unbrick
link is in my signature as well
Sent from my DROID3 using Tapatalk
Hi all, I have looked all over the place, I need help.
Here are my Current "About Device"
Hardware Version: I800.0.3
Model Number: SCH-I800
Firmware: 2.3.5
Baseband Version S:I800.0.3V.E104
Kernel Version: 2.6.35.7-dsb9938.VZW.GTab.E104.1.1.2
I have looked at the "back to stock" threads, multiple DL links are no longer available.
I had rooted, and Flashed a "Cube" ROM quite some time ago. A while after that I messed something up with the built in "overclocking" type app. Set it to the side and kind of forgot about it. Fast forward to know, I would like to get it working for my son to use, but there are a few issues that keep us from using it. I kept getting all sorts of random force closes, so I was able to get in recovery, and tried to wipe everything. This somewhat worked for a while, but now I am getting a force close from Facebook (which isn't installed, and I have narrowed it down to a contact synching issue) and I keep getting a popup for an OTA system update. I have tried to do the update, but I think the recovery is keeping it from completing.
Long story short, I know this device is a bit older, but where should I start from? I am ok with a fresh, wipe everything start. Not looking for a crazy ROM, but just a everything works ROM. I am ok with GB, ICS, etc, I just want it to be fully functioning. I plan on adding the tablet on my account so I can stop tethering for my son to use it. This has been the only device I have ever needed to ask for help, I am just not so used to the ODIN type stuff.
Thanks in advance.
I tried to do a reset, and wipe from CW recovery. Then restore, it has been stuck on the black with white Samsung screen for about 10 minutes. Don't know what else to do right now.
Sent from my SCH-I605 using xda premium
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
priyana said:
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Much appreciated, long/slow download, but hope it works.
Wish I could get into recovery, I would just flash from the card.
Sent from my SCH-I605 using xda premium
There's a very new thread that should help you get back to stock. http://forum.xda-developers.com/showthread.php?t=2383201
As far as what to put on it, I highly recommend this CM10.1 ROM. It runs very smoothly, but if you want to activate data, I think you have to go back a bit for a working kernel. http://forum.xda-developers.com/showthread.php?t=2043421 The CDMA version is the p1c.
I don't know if you have come across this yet, but unlike any device I had flashed before, the GTab recovery has to be flashed with a corresponding kernel. You can't just flash the recovery to get into recovery.