Related
I have done a reasonable amount of searching on this and have not found anything specific to my problem so figured I should post a question.
I have an issue with my Dimaond when it gets hot generally either using Wifi or Phone Data connection that the screen goes out. Basically everything goes to the left side of the phone so if you hit the Task Icon in the top right corner you get the Start Menu. Phone is basically useless at this point and you have to wait for it to cool down. Has happened since day one and is generally worse when using it when charging. I was watching Utube on it the other night 5min video while on AC charge and it went out. I am running Dutty 2.5 Rom and 25.07 radio have tryed 25.08 and 25.05 no difference was happening when the phone had orginal HTC ROM as well. Also will happen on a long call if the screen is on.
Basically feel issue is hardware related and maybe faulty screen still under warrenty so wanted to know peoples opinion on weather I should send back. Problem is will take a couple of weeks and I don't really wnat to wait that long if I can help it. Also assume it would be best to flash standard ROM back, should I do anything with HARDSPL eg should this be changed back as well if I send it back.
And before anyone says it I have tryed searching this topic and have found lots about HOT dimaonds but nothing related to screen going out at the same time :-(
Thanks
I had this issue in my JasJam (Hermes) whre the screen would simply go white after a while of use and I would have to leave it for a while for it to work again.
Unfortunately it sa hardware issue and you should claim a warranty repair on it
I can't see how this could be a software problem so I figured it must be the screen eg hardware related. Would be nice to know if anyone has had the same issue with a dimaond... Seems we may be spending some time apart, just hope it doesn't take long to fix..
I've had the same issue
http://forum.xda-developers.com/showthread.php?t=428976
My first device had been replaced recently (i.e. today) by my network provider (o2) and the new device seems to work without any problems now even if it's "hot".
(i.e. default screen adjustment + creating heat by activating the phone, wlan, bt + recharging it)
I sent an email to HTC regarding the fault and they said it would have to go back for a warrenty repair. I brought it through a resellar so has to go back to HK from NZ so will be away three weeks uurggghhh... Just seems odd I don't have any physical damage on the screen but hte problem has been around since day one as I remember having the problem the first day I got it. Juyst seems to be getting worse and is easily reproduced by usiung utube over wifi gets hot and it is all over. Just wondering if I should put an offical ROM from HTC back on the device before I send it back as I currenty am running Dutty ROM, what do you think....
i put the original rom back on and they still found out the the rom had been flashed, and would not repair on warranty
yep, i also asked about this problem
http://forum.xda-developers.com/showthread.php?t=438733
there are some youtube video's of how the phone behaves
my phone seems to do it less frequently since stopping using panosha's rom
im using alpha zero 7 at the moment..
i've also noticed that it isnt necessarily a heat issue, my phone does it completely at random
yesterday i found though, that when the phone did the alignment issue, i gave it a good shake.. and hey.. its all aligned again?!
maybe it was just a fluke, it hasnt freaked out since..
holding thumbs
Hey,
I also have the same screen problem, but my Alignment goes to right.
If I press on the left side, a press on the right side is recognized.
Good to know that Im not the only one with this problem.
greets doena
I got my phone back a week ago replaced the screen has been away for over two months, complete disaster, anyway all sorted now and I have not had the problem since....
I had this exact same issue (out of the box).
It was a hardware fault and I exchanged it for another one.
Haven't had any problems since.
Minus-1 said:
I had this exact same issue (out of the box).
It was a hardware fault and I exchanged it for another one.
Haven't had any problems since.
Click to expand...
Click to collapse
Hardware's fault ? Most likely not. I will give u an example of why I think it was software related. My device ran hot as well but I simply switched roms and now it's the complete opposite. Your most recent device most likely come with a different Rom in the phone.
PLLEASE WOULD SOMEONE HELP ME....
its been a few days ago that my screen was acting a lil weird...
First i would press on the left side of the screen but it would react on the right...
Example i would press on the start menu and it would open the sorta task manager....another example i was press on phone (left softkey) and it would go into program (right key)
and now i thought it was the rom so i got a new rom and now i cant get pass the align screen, and i have tried with 4 different roms now and still the same problem...
PLEASE HELP I LOVE THE DIAMOND I CANT AFFORD TO LOOSE IT
Thank YOU!!!
Try making smal circles arround the +
does anybody know how to get around this problem?
Download and use this remote alignment bypass utility , connect usb ....
link :- http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip
alireza_simkesh said:
does anybody know how to get around this problem?
Click to expand...
Click to collapse
It's not software's problem, it's more hardware problem, exactlier touch screen problem, for this kind problem we can't do anything, just to send phone to repairing service, and to hope , problem will'not repeat, but from my expirience, just after 10-15 days of using, touch screen start to not responding, i scarried all htc diamonds after some period, became same, and i think this is generally problem of htc diamond 1st generation, maybe for htc diamond 2 , htc company solved this "strange" and big problem, cause this situation means, give money for nothing and problems!
Giving 2 years warranty is ****, if phone will start 3rd year of using with same problem, maybe is better to give 5 years of warrant , cause this problem
I don't know if you've fixed this but i had this very problem and it turned out if you wiped the screen over once then it would be okay.. strange i know but theres quick fix that worked for me.
I had the same problem, I send it to service and tey changed the display
I've same problem, the screen only works well when phone is cold, after warms up it shows the same sintoms
Got the same problem here - when the phone is cold its 99% ok, when it gets warm (or even hot due CPU heavy to flash websites), it starts with this touch screen "dance" (and empties the battery in maybe 2 hours by not going into sleep mode).
But I found out that somehow giving the lower screen border a "massage" does help. I guess there is some screen to board connection behind, which does not get 100% contact when the device is warm/hot.
last tuesday diamond came back from service with new screen....today the same problem
mhoesch said:
Got the same problem here - when the phone is cold its 99% ok, when it gets warm (or even hot due CPU heavy to flash websites), it starts with this touch screen "dance" (and empties the battery in maybe 2 hours by not going into sleep mode).
But I found out that somehow giving the lower screen border a "massage" does help. I guess there is some screen to board connection behind, which does not get 100% contact when the device is warm/hot.
Click to expand...
Click to collapse
Well i tried to make some pressure but same problem. I can disassemble the phone and see if something is not in place, and also use some contact spray to improve connection. Did someone try something like that?
i had the same problem as you due to water damage from using it after a shower. sent it off for warranty and they sent me a refurbished one. sending it off again because it had bad whites and a dodgy centre button.
to bypass the screen alignment screen create a file called "welcome.not" and put it in the root directory of the phone. not in the internal storage, you must put it in the device storage.
i had the same problem as you due to water damage from using it after a shower. sent it off for warranty and they sent me a refurbished one. sending it off again because it had bad whites and a dodgy centre button.
to bypass the screen alignment screen create a file called "welcome.not" and put it in the root directory of the phone. not in the internal storage, you must put it in the device storage.
Hi Guys
I've been having some serious problems with the screen on my X1, most of the time now the screen doesn't respond to me tapping it, alignment is a waste of time.I'm wondering is there something I can do to fix it or will it simply be a matter of returning it. I'm in my last few months of a 18month contract and based on my recent experiences I doubt I will be getting another x1 (or even x2)
Thanks
Simon.
Exactly whats happened to mine! Its my 3rd X1 now and O2 cant (wont) fix it. Its a terrible phone. I cant use it now and you know what, I dont care, I would rather have a Nokia 6310.
Ive had every problem going and Im careful with my phones. First one the screen died when opening, second one no one can hear me and now this. I have also had the usual cracks issue on all 3 phones. Even when the phone works the reception terrible and it hangs all the time. Never a sony Xanything again.
Alignment problems and touch screen problem
I just updated my X1 last week ( 02/17/2010, my phone it's 1 year old with no problem at all, before this ) and everything was OK. Then on sunday the screen wasn't aligned, and I started to aligned almost every hour. Then I realized that after sliding the keyboard, the touch screen was death (not black, but doesn't work the touch function) for about 40 seconds, and after that it works again ( opened and Landscape). I also need to align the screen very often.
Before this happend, I never aligned the screen, only when I updated the X1. Also, on last friday ( before the screen problem ) I installed the Youtube aplication for the X1, and gave me problems because it doesn't have a Landscape screen, and the X1 crashed when I slide it, then I had to reboot it.
After this problem I started to have problems with my X1 ( alignments and death touch screen with keyboard opened )
Does some body have an idea to solve the problem?
Im sure this has to do with software or advanced settings like HKEY config.
Thanks in advance.
i have the same problem
but now, the problem is horrible
the alignement doesn t accept
when i touch the down list (call, contact etc...) the xperia open the Start bar
arggg
Noelch said:
i have the same problem
but now, the problem is horrible
the alignement doesn t accept
when i touch the down list (call, contact etc...) the xperia open the Start bar
arggg
Click to expand...
Click to collapse
me 2
and it returns to normal after a while
what could cause this problem
i flashed many roms, with same result
It's not something either of you installed, but your hardware - either your digitizers are on the way out or your flex.
its hardware
yes, i can say its hardware. I have repaired many of them now.
Most of the time when its black/no touch screen response its the flex cable.
somehow the cable damages very easy when opening/closing it.
its hardware
yes, i can say its hardware. I have repaired many of them now.
Most of the time when its black/no touch screen response its the flex cable.
somehow the cable damages very easy when opening/closing it.
Have try this?
1. Use a registry editor
2. Navigate to or search for:
HKLM/Drivers/TouchPanel/PressureThreshold
and
HKLM/Software/OEM/TFLOSettings/FingerPressure
(eg search on "pressure" and you'll find both)
3. Edit the values to any VERY VERY high value such as 999999999 (nine 9s)
*** CAUTION: do NOT change either of these fields to anything less than about 2000
because if you go low enough you will make your touchscreen unresponsive,
at which point it's tricky to change it back (learned the hard way)
Do I welcome aboard?
I have the same problem now and before I read this thread, I formatted my X1 cos I thought that problem was caused by software. Now I am sure it's about hardware. Have to open it soon
are you sure it's an hardware issue?
for me it started today after hard reset...too bad!
Well screen problems in Xperia are mostly caused due to the loose flex cable. Mine had the same problem. At times the screen would work and sometime the screen would not appear. But if you want to open your X1 and have a go at it yourself then do so.
I managed to fix my flex cable without causing any damage *phew*
If you have nothing to loose then give it a try and see if you get lucky.
Carrier: Rogers (Canada)
Mode: X1A
Hi guys, I've got a pretty big problem with my phone so I'm hoping someone can help. My Xperia is about 10 months old, and it just started giving me this problem last week.
When I slide the keyboard open, the display either doesn't switch to landscape mode, or takes like 30-45 seconds to switch, and doesn't switch entirely so some aspects like the taskbar are still appearing with the stuff that was from portrait mode.
When I slide it out, if I start typing the text won't show up, but when I slide it back in, the text appears instantly so it is registering the key presses.
I thought it would be a software problem so I tried uninstalling some stuff even though i didnt add anything recently, didn't help.
Finally after suffering with I decided to do a hard reset. I was very surprised to find that this didn't fix the problem, because I don't understand how this could be a hardware problem.
I've been using the Touch X ROM for 8 months and have never had this problem until now.
Anyone have any ideas? If not - I'm going to flash back to the stock ROM and try to return under warranty. Is there any way for them to tell that I used a custom ROM and does that void the warranty?
The keyboard also illuminates when I slide it out so I know that the slide is being registered as well as the fact it usually but not always, eventually switch to landscape mode
Normally I would say its a ribbon failure but its a bit odd that it does eventually switch. But its almost definitely a hardware problem.
If you send it under warranty just flash to the stock rom, and the return it to the original spl. And yes having a custom rom will void the warranty, but they can't find that out if you return to original spl
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
moses992 said:
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Click to expand...
Click to collapse
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Didgeridoohan said:
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
Click to expand...
Click to collapse
Havent done that yet. Only thing that would be good for is making sure its a hardware defect right ?
jazz995756 said:
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
Click to expand...
Click to collapse
That makes sense. could be just a loose connector between the LCD panel and the MoBo ..
Problem is i live in Jordan and I got the phone from Dubai. Its still under warranty of the seller (Souq.com ; an online store .. kind of like Amazon of the middle east ), So i have to send my phone to Dubai to fix it. Now i could just go to a local phone repair shop and ask the guy to check the connectors, but im afraid that would void the warranty and not solve the problem ;( .
dahawthorne said:
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Click to expand...
Click to collapse
I submitted the form , although i live in Jordan which has no presence of Google whatsoever but what the heck !
thanks all for your suggestions.
Google is supposedly a global company...
Let us know how it goes, and good luck.
Well, if you figure out that it is just the screen, you can use this program for basic control with a lot of latency
http://forum.xda-developers.com/showthread.php?t=2786395
It's a little rough and confusing but, it's workable. If you need help setting it up feel free to shoot me a PM.