Ok to install Apex 12.2? - Captivate Q&A, Help & Troubleshooting

Hello xda!
So, after months of running Dlev's v5.0 ROM I figured its time for a change so I thought to give Apex 12.2 a shot but, while following the provided guide I got (sadly) stuck in step:
"Heimdall or ClockworkMod?
Are you already running an I9000 based ROM with ClockworkMod recovery version 3 or higher? If so, you may choose to install the kernel/modem package through CWM rather than Heimdall."
Thing is, I've never had to use Heimdall before (Odin has worked for me in the past just great) so I cant for the life of me get it to work: I put my phone succesfully in Download mode, then then i click on "Start" it gives me an "libusb error -12".
I've tried using other computers, switching USB ports, other operating systems, lots of drivers.. rebooting between each driver install, power-cycling both my captivate and pc.. Is there something wrong with my download mode/captivate?
(When powered on, i can correctly mount and read files from my sdcard on any computer, i can also mount the sdcard while on recovery, adb works just fine too)
I figured since the Dlev rom uses a i9000 JVQ firmware (2.3.4), and it comes with DarkCore Recovery v3.0.2.8x I could get away with using CWM rather than Heimdall?
Extra:
About phone info:
Baseband: I9000UGKC1
Kernel: 2.6.35.7-I9000XXJVR-CL425308
Any other info you may need, ask away!
Many thanks in advance
Alex.

seed_87 said:
"Heimdall or ClockworkMod?
Are you already running an I9000 based ROM with ClockworkMod recovery version 3 or higher? If so, you may choose to install the kernel/modem package through CWM rather than Heimdall."
I figured since the Dlev rom uses a i9000 JVQ firmware (2.3.4), and it comes with DarkCore Recovery v3.0.2.8x I could get away with using CWM rather than Heimdall?
Click to expand...
Click to collapse
You're answer is right there.... Use cwm.
The heimdall flash if for if you're NOT on an I9000 ROM. So it can flash the proper bootloaders, which you have already.

Thanx studacris, now running Apex 12.2
Alex.

Related

[Q] Can I flash CM7 via Odin?

Would anyone be kind enough to tell me how I can flash CM7 with Odin? I tried installing Heimdall, and I cannot get past error 12, and also error 3, so IDK what is up with that. Odin works, and I've used it to flash the overcome rom before. But I don't know in what order to flash the files, or if I need to reboot and flash more files, etc.
My tab is on ... GT-P1000, firmware 2.3.3, baseband P1000XXJPZ,
Kernel 2.6.35.7 [email protected] #2, build number GINGERBREAD.XXJQ1
Please. Thank you.
Why not just flash via cwr
maxtcee said:
Why not just flash via cwr
Click to expand...
Click to collapse
Sorry, I forgot to mention that I tried that, and it did not work for me.
S, have you rooted the tab and installed CWM or just flashed the rooted kernel with CWM already cooked in?
Its no good just flashing to gingerbread.
Also, with Heimdall, you need to flash the drivers 1st. Its called Zadig.exe in the drivers folder. It won't work otherwise ( this will take a little while, it even says so).
If you want to go back to Samsung drivers afterwards, just put the tab into download mode again (after flash is complete) and rollback the drivers. This has worked multiple times on my PC using Windows 7 64 bit...

[Q] I think I'm half bricked.. Help

Hello,
I own a I-897 Captivate model, and I had a custom 2.3.4 gignerbread rom recently..
Latley I tried to move to cognition becuase the other rom did problems for me..
So I followed the guide, and when I first flashed the kernel I wasn't using any pit file..
So it's just stuck on odin with nothing happening, so I closed odin and rebooted my phone.
Then the phone showed me a logo with phone and computer with X between them.
So I flashed again using the pit then I got to the recovery, where I tried to install the cognition 5.2 without succes, it finished the install, but when I rebooted it just kept switching between the boot screen of AT&T and Galaxy S GT I9000..
So I tried to use my Nandroid backup, but it just won't work, I tried to install it manually and still it isn't working..
So I tried to instal my previous rom and succeeded, but now when I reboot it it just loading the Talon logo, finishes it and stuck on the end of the loading without any action...
So, I can use the download mode and odin.
What should I do?
Thank you very much.
What build number is your phone
Sent from my I897 using XDA Premium App
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Gibieyal said:
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Click to expand...
Click to collapse
Please I beg you to stop what you're doing and just Read, Read like your life depends on it and keep reading till you can flash with utter confidence least you permanently brick your Cappy.
Sent From My SGS Captivate 2.3.5 Biffmod
I have read tons of time,
I tried to install Cyanogenmod, but it seems when I get to the recovery it doesn't work..
I flashed the recovery through CWM, but its very limited and blue not bright green or yellow as always.
I only got 4 options:
Reboot
Re-Install packges
Wipe user data
Wipe cahce
How do I get my recovery work properly?
That's not CMW that's the regular 3e recovery. You'll need to flash a kernel with CMW built in or one with an alternate recovery (I usually use an Onix kernel)
Sent From My SGS Captivate 2.3.5
I've flashed a full gingerbread stock rom, with boot loaders and it works fine,
but now I can't get to the download mode, so I cant flash the rooted kernel..
I'm stucked unrooted, How can I root it?
It's Gingerbread 2.3.3 UCKF1 Build stock rom.
Pull out your battery, Sim, and SD card. Plug your usb cable into a usb port on the back of your computer then plug it into your phone. Hold volume up and down then reinsert your battery, should boot into download mode.
Sent From My SGS Captivate 2.3.5

Galaxy S wont boot

Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch

[Q] Major issues with the i9000 right now. Please Help.

Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Well I just tested the SD card in another phone and it works fine. So it's definitely the software/rom I'm using now I think.
Is there anything I can do to make this work. Maybe like a completely stock 2.2.1, that is guaranteed to work haha? I just need this card to be read. Because even when I plug the phone and run Kies, Kies doesn't recognize the version of the firmware. And If I try to use superoneclick root, it also doesn't recognize the version of the firmware.
So right now I'm using 2.2.1 XWJSD, which stock rom should I install with odin or Heimdall to make this work?
Thanks a lot again.
Head over to this thread and download JVZ (Gingerbread 2.3.6), flash with Odin with re-partition checked, then head over to Chainfire's thread for CF-Root kernel for JVZ and flash that through Odin as well.
Forget about Kies since you'll no longer be using that to update firmware and whatnot.
CF-Root will come with CWM installed, so after you get that done, download MIUI and flash through CWM
Thanks a lot will try it out.
This CF-Root right? CF-Root-XX_OXA_JVZ-v4.3-CWM3RFS.zip
Unfortunately the phone is stuck in a bootloop now after installing 2.3.6 JVZ.
Did you make sure re-partition is checked? If it still bootloops after re-partition then try JVT or some other stock ROM and see if that boots up before applying the CF-Root kernel
Yeah I made sure re-partition is checked, and I installed it with the 512 pit file, unless I shouldn't be using the .pit?
your gona have to reflash the rom or install arom thats already rooted you could try darky 10.2 re or check out puggerduk on tube
Root Galaxy S i9000 and install a custom rom
Hey guys refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1451345
He's having the same issue, so just help us out there Thanks alot!
eclipse245 said:
Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Click to expand...
Click to collapse
MIUI is running based on Android 2.3, I found the Android forum that helps me well enough to do my first flashing and rooting. Here is what you need to try to do:
1. Flash your i9000 with XXJVU 2.3.6 ( Value Pack ):
http://www.theandroidsoul.com/xxjvu/
2. Root your I9000 with CF-Root-XX OXA JVU 2.3.6-v4.3-CWM3RFS:
http://www.theandroidsoul.com/root-xxjvu-firmware/
Do everything on the post and you can install MIUI ROM from recovery straight away after that.
Hope this helps. If it does, please consider press 'THANKS' button

Help getting cwm

Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
GendelD said:
Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Click to expand...
Click to collapse
flash GingeBread 2.3.6(Maybe xxjvu or JW4) and flash cf-root.
you may follow this http://forum.xda-developers.com/showthread.php?t=2149455
to use custom rom GB 2.3.6 is a good start, if you want to flash cm10.1 i suggest after you flash CM7(GB) -> cm9 (ICS) ->CM10 (JB) to avoid lost imei.

Categories

Resources