Related
Just got a griffin powerjolt micro, comes with an ipod cable so you'll have to use your own, but it charges the streak up a treat
Think it was 12 pounds from amazon.
It's designed for iPads, which need 2 amps, it's rated for 2.1 amps. Charged from 30 to 60% in 20 mins while using gps.
Hope that's useful .
Sent from my Dell Streak using XDA App
For battery life is better to charge with low amps and for a long time. I would prefer ,not to use a charger with more than 1A
i got myself te belkin 1A charger. Should work good I guess.
As mentioned in the other thread, both these two work just fine :
https://www.dealextreme.com/p/car-p...cable-charger-set-for-apple-ipad-12-24v-45227
https://www.dealextreme.com/p/car-cigarette-powered-1000ma-usb-adapter-charger-black-dc-12v-40470
$6 or $2 including free shipping worldwide. You'll need the Streak's USB cable to connect it.
Anbuch said:
For battery life is better to charge with low amps and for a long time. I would prefer ,not to use a charger with more than 1A
Click to expand...
Click to collapse
The car charger does not force power into the phone, the phone draws what it needs. Using a power supply with a higher Amp rating means less strain on the charger not more power than is needed going into the phone.
Sorry for my bad English, I guess you do not understand what I mean.
You're right that the car charger with more amps does not force more power into the phone (I do not say that),but if you use a charger with more amps , charging time is less. The battery prefers long time charging with less charging amps. In fact using less charging amps ,the battery allowed to load more power (a little bit ). You can try it by using a USB port of yours computer to charge the battery.
Anbuch said:
Sorry for my bad English, I guess you do not understand what I mean.
You're right that the car charger with more amps does not force more power into the phone (I do not say that),but if you use a charger with more amps , charging time is less. The battery prefers long time charging with less charging amps. In fact using less charging amps ,the battery allowed to load more power (a little bit ). You can try it by using a USB port of yours computer to charge the battery.
Click to expand...
Click to collapse
Maybe it's just me, but what you are saying is exactly the same thing.
If the charger isn't forcing more power into the phone, then the charging time will not change. If the battery is receiving less current then what it was designed, such as a low powered USB port, then it would take longer then normal to fully charge. But once the charger puts out the amount of current that the battery will normally draw, the battery will only charge at that rate. Increasing the current beyond that amount will not speed up the charging time or push more current to the battery.
brianlp said:
If the battery is receiving less current then what it was designed, such as a low powered USB port, then it would take longer then normal to fully charge. But once the charger puts out the amount of current that the battery will normally draw, the battery will only charge at that rate. Increasing the current beyond that amount will not speed up the charging time or push more current to the battery.
Click to expand...
Click to collapse
Anbuch is trying to say that the battery will last longer in the first scenario - the longer, slower charge from the low powered USB port.
Quicker battery charging does degrade the cells in less time - if you were to always use a 500mA charger, you would get more life from the battery than if you were to always use the stock 1000mA charger.
You can pick up a replacement battery from eBay for $10, so none of this really matters - when your battery wears out in 18 months, just buy a new one.
Nomgle ,thanks, this is exactly what I wanted to say!
I just gave an example with a USB port. In fact a USB port and a stock 1000mA charger are save enough for the battery of a Streak (1530mA). I just wanted to say : Do not use 2100 mA charger
Flinx78 said:
.... it's rated for 2.1 amps. Charged from 30 to 60% in 20 mins while using gps....
Click to expand...
Click to collapse
This will "kill" the battery very soon
Some battery reading:
Understanding lithium-ion
Charging lithium-ion batteries
How to prolong lithium-based batteries
From the last page linked:
[FONT=Arial, Helvetica, sans-serif]Generally speaking, batteries live longer if treated in a gentle manner. High charge voltages, excessive charge rate and extreme load conditions will have a negative effect and shorten the battery life. This also applies to high current rate lithium-ion batteries.
Not only is it better to charge lithium-ion battery at a slower charge rate, high discharge rates also contribute the extra wear and tear.[/FONT]
Click to expand...
Click to collapse
.
I use a black&decker converter and it has a usb port already built into it and that works pretty good for me.
Sent from the phone killer of ALL phone's, Dell Streak!
Hi,
I found a portable charging device which has an output of 5v 2500mAh.
http://www.ebay.com/itm/5V-2-5A-Out...B-Battery-Charger-18650-Box-NEW-/260936968759
To my knowledge, most lithium batteries has no problem charging at 1C, but for what I can see, there is no original chargers from any manufacturers for any phone that charges at 1C.
So my question is, since the battery capacity for galaxy note is 2500mAh, is it safe to charge at 2500mAh rate too? Does it dramatically affect lifespan etc?
Thanks.
Hello,
the charger you are referring to has the output 5V and 2500Ah = 2,5A, not 25000mAh..
Is it safe to charge Note with this?
I guess it is.
Just because the charger can give you 2,5A current, doesn't mean that that kind of current will really flow to your device.
I suppose that each mobile phone (including schaisung note ) has its own charging control system, and will not damage the battery.
Regards
Hubert
given that the charger that comes with the Note (and most other phones AFAIK) are rated at 1amp, I personally wouldn't want to use something pushing a higher amperage than the phone was designed for.
wouldnt it be easier just to get a spare battery and swap instead?
@hub
I think you must have misread.. I did not say it is 25000mAh, but 2500mAh (and yes, I do mean 2.5amp output), I won't be so crazy to charge it 25amps unless I want to see some explosion
As for why I just don't want to just buy a spare battery, mainly because I feel uncomfortable having to open/close battery door frequently and im using a case so makes it more of a hassle to do so.
Anyway, the question remains, is it safe to charge the battery @ 2.5amp, 1C?
AFAIK 2.5A should be risky when the note is rated a 1A under the battery.. and 4 x 18650 would be HUGEE size. I would rather go with the 1A & 2 x 18650 which is safe and small.. you can always carry extra 18650 with you instead of loading all the 4.. my 2 cents..
http://www.ebay.com/itm/5V-1A-Outpu...ltDomain_0&hash=item4ab2eae7b0#ht_3985wt_1185
tablighs said:
Hi,
I found a portable charging device which has an output of 5v 2500mAh.
http://www.ebay.com/itm/5V-2-5A-Out...B-Battery-Charger-18650-Box-NEW-/260936968759
To my knowledge, most lithium batteries has no problem charging at 1C, but for what I can see, there is no original chargers from any manufacturers for any phone that charges at 1C.
So my question is, since the battery capacity for galaxy note is 2500mAh, is it safe to charge at 2500mAh rate too? Does it dramatically affect lifespan etc?
Thanks.
Click to expand...
Click to collapse
@tablighs
Of course, that was my typo.
What I meant that the current is given in A (or mA etc) not Ah...
Thanks everyone for your help!
Last nite, I played dead trigger until battery warning indicated 4%.
But I still keep playing and suddenly the screen went black.
I think the battery is totally dried out at that time. So I used the following
charger but failed to charge even after 10min. Here's the charger:
1. 3rd party 5V 3A charger,liteon brand.
2. old nokia 0.5A charger.
3. original samsung note2 charger.
all those 3 charger works normall on my n10 before last nite.
and suddenly i think maybe i can try out the original charger of n10.
And it works!
So i wonder if samsung or google put special charger on the adapter?
Before we know anything furthur.pls put ur n10 charger in safe place.
I think most tablet chargers output a voltage of 12v. That might of kicked your battery back to life.
xxKamikazexx said:
I think most tablet chargers output a voltage of 12v. That might of kicked your battery back to life.
Click to expand...
Click to collapse
I've confirm the voltage of my n10 adapter. Which printed "5V 2A".
It probably just needed a certain amount of minimum battery voltage to function and show charging. I doubt if the OEM power supply is special in any way. The charging circuit is really inside the N10.
wptski said:
It probably just needed a certain amount of minimum battery voltage to function and show charging. I doubt if the OEM power supply is special in any way. The charging circuit is really inside the N10.
Click to expand...
Click to collapse
when i plug in the non-n10 charger, even after 10min,n10 is not able to boot. Only flaahing the battery charging symbol for 1 sec.
when i plug in the original charger, n10 can be boot instantly.
thats why i think it is very weird about the original charger. but other chargers still works well when n10 battery is NOT completely dried out.
matika said:
when i plug in the non-n10 charger, even after 10min,n10 is not able to boot. Only flaahing the battery charging symbol for 1 sec.
when i plug in the original charger, n10 can be boot instantly.
thats why i think it is very weird about the original charger. but other chargers still works well when n10 battery is NOT completely dried out.
Click to expand...
Click to collapse
Yeah, that is very strange indeed. It does draw in the 1800mA range from the battery during boot up. Are you using the same micro-USB cord all the time? It was reported that there are big differences in charging rate with different brands of cords.
This was covered in another thread recently.
Basicially the Samsung chargers have 2 pins shorted together to get full charging power of around 1.5A with the n10. Using other chargers will get you around 500ma output.
My guess is if you left your tablet on the "other" chargers overnight it would come on just fine. They simply don't output enough juice to power the tablet when the battery is that low.
matika said:
when i plug in the non-n10 charger, even after 10min,n10 is not able to boot. Only flaahing the battery charging symbol for 1 sec.
when i plug in the original charger, n10 can be boot instantly.
thats why i think it is very weird about the original charger. but other chargers still works well when n10 battery is NOT completely dried out.
Click to expand...
Click to collapse
Had you left the other chargers on long enough, the tablet would have booted fine. I've run into this. I have an old(er) Samsung Tab 2 10.1 charger I use with my N10 (now along with a Pogo cable) and my N10 charges rapidly. That, coupled with the two wires shorted out in Samy's setup for the larger amp's.....also, in my job, I work with other chargers all the time and use them all the time across multi platforms, to include my N10, and it charges fine (albeit much more slowly).
swany6mm said:
Had you left the other chargers on long enough, the tablet would have booted fine. I've run into this. I have an old(er) Samsung Tab 2 10.1 charger I use with my N10 (now along with a Pogo cable) and my N10 charges rapidly. That, coupled with the two wires shorted out in Samy's setup for the larger amp's.....also, in my job, I work with other chargers all the time and use them all the time across multi platforms, to include my N10, and it charges fine (albeit much more slowly).
Click to expand...
Click to collapse
My charger(PS) for my Dell Streak 7 works just fine with the N10. This all makes sense except for the fact that the poster stated using a: 3rd party 5V 3A charger,liteon brand which didn't work.
wptski said:
My charger(PS) for my Dell Streak 7 works just fine with the N10. This all makes sense except for the fact that the poster stated using a: 3rd party 5V 3A charger,liteon brand which didn't work.
Click to expand...
Click to collapse
Should still work fine. Voltage is the same and the device will only draw as much amperage as needed. May have something to do with the circuitry in the charger? It may have been bad. As long as you don't supply more volts you are OK. More amps is also OK. Not enough amps will lead to burning up the charger unless the device is smart enough to realize its on a low amp charger (like the n10) and kick down so as not to over draw (ie - over drawing from the USB port which is a .5amp (500mAmp) or 1amp (1000mAmp)...someone correct me on the number here please)
The whole reason manufacturers tell you not to use someone else's charger is so you don't plug in, say, a 12 volt charger into a 5 volt item. That would pop something. That or some cheap charger poorly built could allow "dirty" power through causing problems. Both issues voiding warranties
Not sure if it's been mentioned, but depending on the usage of the tablet, you might not be able to charge it quicker than the power usage. For me, if I'm playing a demanding game at 1.7Ghz and max brightness, neither USB or Pogo can charge the tablet, and battery still drops (slower, but still drops).
swany6mm said:
Should still work fine. Voltage is the same and the device will only draw as much amperage as needed. May have something to do with the circuitry in the charger? It may have been bad. As long as you don't supply more volts you are OK. More amps is also OK. Not enough amps will lead to burning up the charger unless the device is smart enough to realize its on a low amp charger (like the n10) and kick down so as not to over draw (ie - over drawing from the USB port which is a .5amp (500mAmp) or 1amp (1000mAmp)...someone correct me on the number here please)
The whole reason manufacturers tell you not to use someone else's charger is so you don't plug in, say, a 12 volt charger into a 5 volt item. That would pop something. That or some cheap charger poorly built could allow "dirty" power through causing problems. Both issues voiding warranties
Click to expand...
Click to collapse
Never seen anything burn up because of low amperage., power or watts generate heat and power(watts)=voltage x current.
Did you ever see a PS(charger is inside the N10) with a USB port that supplies anything but 5V? I haven't.
Current (amps) does the charging.
No USB charger will provide anything more than 5.1 volts. If the charging block has a USB plug look at the rating. Amperage for smaller devices may be 1a or even less. Newer big smartphones have bigger batteries and need more current to charge. My old Thunderbolt charger is 1A, the charger Motorola provides for my Maxx HD is 1.5A, the Samsung charger for my Galaxy Tab 2 7.0 is a 2 amp charger, so is the charger for the iPad that some frickin' jerk ripped off from my house. The Xoom escaped that problem by having a separate charge plug, not using the USB system, it 12 volts at 1.5 amps. See the pattern? A tablet of any kind has an even bigger battery and needs even more current to charge. The reason the N10 may lose charge even when plugged in is that the charger can't deliver the current needed to run the device and charge the battery simultaneously.
As I see it, Samsung and Google need to supply a slightly higher amperage power block to compensate for the use/charge balance problem. Our solution would be to turn it off and charge the device every night or even leave it plugged in when not in use.
Another thing is the surface area for current transfer. The USB points are tiny, the POGO Pins, dedicated to charging would be able to handle more current because they have more surface area.
Any one who knows better may correct me, I just ordered an N10 today from Google so my information here is what I have read here and what I know from years in the electronics field..
ongre12 said:
No USB charger will provide anything more than 5.1 volts. If the charging block has a USB plug look at the rating. Amperage for smaller devices may be 1a or even less. Newer big smartphones have bigger batteries and need more current to charge. My old Thunderbolt charger is 1A, the charger Motorola provides for my Maxx HD is 1.5A, the Samsung charger for my Galaxy Tab 2 7.0 is a 2 amp charger, so is the charger for the iPad that some frickin' jerk ripped off from my house. The Xoom escaped that problem by having a separate charge plug, not using the USB system, it 12 volts at 1.5 amps. See the pattern? A tablet of any kind has an even bigger battery and needs even more current to charge. The reason the N10 may lose charge even when plugged in is that the charger can't deliver the current needed to run the device and charge the battery simultaneously.
As I see it, Samsung and Google need to supply a slightly higher amperage power block to compensate for the use/charge balance problem. Our solution would be to turn it off and charge the device every night or even leave it plugged in when not in use.
Another thing is the surface area for current transfer. The USB points are tiny, the POGO Pins, dedicated to charging would be able to handle more current because they have more surface area.
Any one who knows better may correct me, I just ordered an N10 today from Google so my information here is what I have read here and what I know from years in the electronics field..
Click to expand...
Click to collapse
You don't need more current to charge a bigger battery, it's all about how long it will take to charge to full.
Some have stated that they've seen a 3A battery drain with certain games. The 9Ah battery would last approx. 3 hours which exceeds the max rate of the charging circuit and the PS. Even on a fully charged battery at that rate doesn't last that long.
AFAIK for any tablet to be able to draw 2A from any 5V charger (that can supply the needed amperage) the data pins (middle two pins from the use cable) have to be at 2.5V. Otherwise even if the charger is with correct specifications 5V/2A the tablet might not charge at all, or charge at a lower rate.
Sent from my Nexus 10 using Tapatalk HD
I forget the actual brand/model of the actual charging chip but if you poke around in the N10 files you can find it but it's specs are list as 2.5A max but N10's code limits it to 2.1A. This isn't the PS wall wart commonly called the "charger".
The recommended charging current for any lithium ion or lithium polymer is 0.7C. What that actually means is a current 0.7 x max capacity in mAh. For most phones e.g. my Galaxy Note 2 with a capacity of 3100 mAh this means a current at about 1.7A.
The battery Nexus 10, on the other hand, could very well be charged at a whooping 6.3A current.
In USB Battery Charging Specification 1.2 the maximum current a USB port can supply for charging purposes can be as high as 5A.
With the Perseus kernel for Note 2 you can actually specify the max limit for how much current the phone will draw from any charger.
So in theory.. it should be possible to charge the Nexus 10 with a 5V 5-6,3A charger.. and that would probably be very quick!
For the record: I havn't seen many (any?) chargers with more that 2.3A
MartiniGM said:
The recommended charging current for any lithium ion or lithium polymer is 0.7C. What that actually means is a current 0.7 x max capacity in mAh. For most phones e.g. my Galaxy Note 2 with a capacity of 3100 mAh this means a current at about 1.7A.
The battery Nexus 10, on the other hand, could very well be charged at a whooping 6.3A current.
In USB Battery Charging Specification 1.2 the maximum current a USB port can supply for charging purposes can be as high as 5A.
With the Perseus kernel for Note 2 you can actually specify the max limit for how much current the phone will draw from any charger.
So in theory.. it should be possible to charge the Nexus 10 with a 5V 5-6,3A charger.. and that would probably be very quick!
For the record: I havn't seen many (any?) chargers with more that 2.3A
Click to expand...
Click to collapse
Sure the charging rate is way under what it should be but as they use larger and larger capacity cells the only solution is a removable cell to charge by other means.
Hi everyone.
I recently got the Xperia Z and noticed the original charger packs a 1500mAh speed (which got me confused because I thought AMP referred to charging speed), but anyhow. I also bought a power bank (external backup battery) and the thing has 2 ports, 5V 1AMP and another 5V 2.1AMP. So I was wondering if the Z can take the 2.1AMP speed without damaging the battery. What do you guys think?
Thanks.
You won't harm it instantly no. Over time, yes.
The battery lives better if you charge it slowly, I charge mine with 500mA when I go to bed. I'd use the 2ma if you were really rushed.
My Stock charger is 1800mA btw. (Dock)
The phone will automatically limit the charging current (amperage), so the battery won't be charged too fast even if you use a 2A charger. I do not know at what amperage the XZ limits the current, but I suppose it's somewhere around the 1500mA of the standard charger.
On the other hand, charging with very low currents may also damage the battery. I read somewhere that prolonged use of a charger with less capacity than around 0.5c (c=the capacity of the battery; 2330mA) might be bad for the battery. Therefore it isn't recommended to only use the USB port of your computer (500mA).
So, for repeated use over long periods of time, a charger with a capacity of over 1165mA (0.5c) is recommended.
Well I don't know what to believe anymore :x
You can safely charge with almost any trusted-brand MicroUSB charger. As long as it's not broken or a cheap chinese knock-off or anything like that. It will output only as much as the phone will accept.
EDIT: 2.1AMP (as you state it) is 2100mA (milliamperes). That's it's current output. It does not refer to "speed" per se, but a battery will charge faster with a higher output charger. A 1000mAh battery will charge from 0 to 100% in one hour if you use a 1000mA charger. Or in half an hour with a 2000mA charger. That's the theory.
In reality, phones and batteries will have safety circuits that limit the charging current so that the battery won't get damaged. It simply will not charge faster than what's safe. If, say, our XZ is limited at 1500mA, then it won't let in more than 1500mA. No matter if the charger is rated at 1500mA or 2000mA. The phone will, however, accept less than 1500mA, but when the current sinks below a certain limit, the phone won't charge at all. That lower limit might be somewhere around 400mA. If your computer's USB port gives out considerably less than 500mA (which is the norm), then there might be something wrong with the port and the phone won't accept it.
For comparison, the Samsung Galaxy S II won't charge at any higher than 700mA. No matter if you connect it to a 700mA or a 2000mA charger, it will only take 700mA and that's it. The stock SGSII wall charger is 750mA.
The XZ, having a bigger battery, will charge at higher than that. I'm guessing 1400-1500mA because the stock charger is 1500mA.
Don MC said:
You can safely charge with almost any MicroUSB charger. As long as it's not broken or anything.
Click to expand...
Click to collapse
Awesome then, thanks a lot for your help
Let's face it. It's always best to go with the original charger. If you use a non standard charger the best practise is to use one that has a similar amperage. That said, my Power Bank case puts out 1amp via the dock pins, so... And it's made for the Xperia.
Sent from my C6603 using XDA Premium 4.
Ride it like you downhill it.
Hi everyone, I'm looking for more info about the fast charge function of the Note 4: I can read on the charger that it either provides 5 on 9V. Does this mean that I can supply 9V on the USB port to fast charge my note 4 ? Does anyone know how the charger detects wheher it it should supply 5 or 9V?
botid said:
Hi everyone, I'm looking for more info about the fast charge function of the Note 4: I can read on the charger that it either provides 5 on 9V. Does this mean that I can supply 9V on the USB port to fast charge my note 4 ? Does anyone know how the charger detects wheher it it should supply 5 or 9V?
Click to expand...
Click to collapse
Yes, it means that that charger will deliver power at 9 V (at 1.67 A) to the phone.
As for how it decides which voltage/current to use, it'll be as a function of the battery's charge level, temperature, and probably some other factors, but that's getting into some very specific settings for the phone/charger system by that point.
Dan1909 said:
Yes, it means that that charger will deliver power at 9 V (at 1.67 A) to the phone.
As for how it decides which voltage/current to use, it'll be as a function of the battery's charge level, temperature, and probably some other factors, but that's getting into some very specific settings for the phone/charger system by that point.
Click to expand...
Click to collapse
thanks for the quick reply! I've got a couple of Dc Converters (buck) and lipo batteries (11.1V) and was wondering how the phone signals the charger it can accept 9V and if I can use my DC step down to feed the phone with9V...
I guess I will have to try
botid said:
thanks for the quick reply! I've got a couple of Dc Converters (buck) and lipo batteries (11.1V) and was wondering how the phone signals the charger it can accept 9V and if I can use my DC step down to feed the phone with9V...
I guess I will have to try
Click to expand...
Click to collapse
I guess it requires original charger for that function, probably with kernel modification you can disable that only 9v OEM charger use for QC
Hello guys ! Do you think this fast charging function is alright for the battery ? as far as i know high current may damage the battery .
liberfarb said:
Hello guys ! Do you think this fast charging function is alright for the battery ? as far as i know high current may damage the battery .
Click to expand...
Click to collapse
I agree that it might be damaging to the battery (but obviously not extremely damaging). Why else would there be the option to switch off fast charging? I've switched mine off anyway because I have no use for it as my phone charges overnight and makes no difference how quickly it gets to 100%.
ozaghloul said:
I agree that it might be damaging to the battery (but obviously not extremely damaging). Why else would there be the option to switch off fast charging? I've switched mine off anyway because I have no use for it as my phone charges overnight and makes no difference how quickly it gets to 100%.
Click to expand...
Click to collapse
Thank you for the quick replay mate , I have switched this feature off as well for the same reason I charge my smartphone during the night
ozaghloul said:
I agree that it might be damaging to the battery (but obviously not extremely damaging). Why else would there be the option to switch off fast charging? I've switched mine off anyway because I have no use for it as my phone charges overnight and makes no difference how quickly it gets to 100%.
Click to expand...
Click to collapse
I personally thought the option to disable Fast Charging was Samsungs' way of reminding us, or letting the uninformed know, that it can do it.
The generally accepted rule amongst radio control hobbyists is that provided the battery is well made, it's not the current that'll kill a battery - it's overcharging it (over 4.2V per cell on a LiPo). Provided that the charging circuit is good (and I have no doubt it is of a high quality) we shouldn't see any degradation in battery life when used with the fast charge process.
Others may chime in with more info, but that's how I understand it.
SquidgyB said:
The generally accepted rule amongst radio control hobbyists is that provided the battery is well made, it's not the current that'll kill a battery - it's overcharging it (over 4.2V per cell on a LiPo). Provided that the charging circuit is good (and I have no doubt it is of a high quality) we shouldn't see any degradation in battery life when used with the fast charge process.
Others may chime in with more info, but that's how I understand it.
Click to expand...
Click to collapse
l believe the fast charge is safe for the battery as it charges it at 1C (=1hr charge) which is actually not so fast.
Here is my tip: I have an old charger to charge overnight and use the mote 4 charger only for fast charging during the day (I leave it in my bag). I'm actually lookingfor a way to make a fast charging battery bank.
So here is my question again: has anyone tried supplying 9V to the phone ?
best device in charging
its charging up the whole battery in about an hour, i really like that and the battery gives me a full day
So far right now i can talk for about an hour and play games for about an hour and leave it on overnight and all day and still have 82% left. I'm super impressed!
equlizer said:
So far right now i can talk for about an hour and play games for about an hour and leave it on overnight and all day and still have 82% left. I'm super impressed!
Click to expand...
Click to collapse
YOAH!!! Thats insane!
I know that the amperage on the charger is huge in its speed.
I used many custom Roms and kernels in the past on other phones with fast charge. I used several chargers and always charged much quicker with higher amperage outputs. Some were as low as 300 MA to as high as 1.2A. This is why the amperage is so high on this phones charger. The voltage is needed to push the charge quicker. Good luck finding high A charger at 9v.
My 1.2A charger i use as backup is much faster then the 500/700ma ones I have but they are all 5v and can't compete with fast charge.
Sent from my *ROOTED* Note 4 SM-N910W8
I'm also looking for a power bank that would be able to charge at
- 5V 2A,
- 5.5V (Galaxy Tab S)
- 9V (Note 4).
- with 2x18650
- able to charge itself fast too;
- charge-through (charging a device while changing itself).
i now have this ENB model, but it does not deliver 2A to Tab S (and charges at 5V not 5.5).
And it charges itself with 1A even from 2A-capable power supply.
Hi all,
I notice something that the note 4 does not charge fast after I installed S-View cover (original one), although an indication appeared that it is using the fast charging function.
I guessed it assume that the cover is open and charge slower. However, if I removed the S-View it charge noticeably faster.
Do you think this a bug in firmware ??
Thank you,
The so-called USB fast chargers query the device to be charged. Devices capable of fast charging at 9V DC have additional circuitry in their USB ports that the charger can detect. If the charger doesn't detect the circuitry, it falls back to 5V DC mode, like any other USB charger. Assuming the fast charger is functioning correctly, it should not over-charge an older phone or tablet that doesn't support fast charging; it will simply take as long as the original "dumb" USB charger did.