Database Develop

Help with OC kernel

Hey guys.
I want to install dumfuqs oc 710 kernel on cos ds gingerbread rom
When I flash the kernel it stays stuck on the boot screen and never boots the rom.
How do I set up the scaling_max_frequency properly.
I tried once before and it didnt work, which is why im asking for help...,.
Also does dumfuqs 710 kernel work with 2708 15mb hack???

My o2x won't boot when I apply a oc/uv kernel

Hi all
I possess one o2x at present there 1035.21_20110218 on mckr12 Roma fr16 beta 4.
I noticed that when I flash a capable kernel oc / uv, my phone stuck on the log's logo...
Anybody has already met this problem?
Thanx

No but if you reflash the rom it will remove the new kernal and put the original one back on and you will keep all your apps etc aswell

I have this problem too, i flash the new Fr17 & Fr18 mcr can't boot. If i just flash the older Fr16 kernel, it booted...............

soo. no way to have a uc/uv kernel on my o2xs ? :'(

If you flash vork then it won't work cause it was meant for CM7
just reflash back the ROM in recovery

Back to Stock Rom.

Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...

dridri85 said:
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
Click to expand...
Click to collapse
unfortunately, i have try two times and it is same.

Unable to change ROM

Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks

U should root ur device...flash clockwork mod and then flash rom
Sent from my GT-S5570 using xda premium

How do you think I flashed the rom in the first place?
Device rooted, latest version of CWM.

innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
hi
use SUTL and flash stock rom then get the CWM and install the CM7 via CWM it should work

this CM7 is on .35 based kernel and utterchaos kernel is .32 , that is creating the problem .....
So, if you want to try this rom, first install TJ's RC3 rom than install this rom .....
if u dontt want to try this now (as u have bricked ur phone once ) ....
just install stock GB rom via SUT ....

innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
dude since edowar's latest cm7 is Based on a new kernel 2.6.35.7, u have to flash stock sharp rom through SUT. then use tj's cwm recovery for latest kernal and flash cm7 27-3-2012
else you can flash UPDATE ROM 31-12 directly it is also good rom

So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?

innocuous76 said:
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
Click to expand...
Click to collapse
No u cant. But if you're from stock GB you could flash older CM7 based on the. 32 kernel instead
Sent from my CSL-MI410 using XDA

[Q] CWM missing after ICS Semaphore kernel upgrade

Hi, i'm running Teamhacksungs build 17, and just tried upgrading to new Semaphore 1.2 (regular and s version).
Started by running kernel cleaner script from CWM.
First tried the regular version, and phone would not boot anymore past the Semaphore kernel splash screen.
Then i tried the s version (aka. bigmem configuration), and after succesful flash trough cwm and boot, now my phone freezes at kernel splash screen. To make matters worst, CWM through three button combo is not working anymore!
Bootloader still works, so i was wondering, is it possible to flash new ics kernel with CWM through odin? I really dont want to re-stock my phone with GB and then start the whole ics upgrade process all over again, specially cos my backups are not fresh . (I know, stupid me).
Any help would be great!!

I think you can flash mid night kernel using odin.
Sent from my GT-I9000 using Tapatalk 2

Try another rom
This rom cleanAOKP 1.0.2 have already update to semaphore 1.2
http://forum.xda-developers.com/showthread.php?t=1552124

[Q] Kernel won't flash

Hi all,
I'm running CM7 on my i9001 and tried to experiment with different kernels. Everytime I try to flash a new kernel, however, the phone won't boot up anymore and I have to recover. I tried vitality, skyhigh and cranium using both CM recovery and quick flasher.
Is CM7 possibly incompatible with other kernels? I'd very much like to try overclocking and undervolting but set cpu doesn't allow me to do that.
Thanks,
Marsi

No idea anyone?