Database Develop

My o2x won't boot when I apply a oc/uv kernel

Hi all
I possess one o2x at present there 1035.21_20110218 on mckr12 Roma fr16 beta 4.
I noticed that when I flash a capable kernel oc / uv, my phone stuck on the log's logo...
Anybody has already met this problem?
Thanx

No but if you reflash the rom it will remove the new kernal and put the original one back on and you will keep all your apps etc aswell

I have this problem too, i flash the new Fr17 & Fr18 mcr can't boot. If i just flash the older Fr16 kernel, it booted...............

soo. no way to have a uc/uv kernel on my o2xs ? :'(

If you flash vork then it won't work cause it was meant for CM7
just reflash back the ROM in recovery

Back to Stock Rom.

Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...

dridri85 said:
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
Click to expand...
Click to collapse
unfortunately, i have try two times and it is same.

Help me Get Phone TO show up in Odin

Well i tried to change kernel on my phone but something happened and no my phone is stuck in a BootLoop.
I wanna flash back to stock using Odin but it won't show up in Odin when i plug my phone in.
It can go into both recoverymode and download mode.
Plzplz help guys

CWM recovery?
Insanity CM

Jason123420 said:
CWM recovery?
Insanity CM
Click to expand...
Click to collapse
but the phone doesn't show up on my computer at all so i can't even put a stock Rom on my phone

What rom were you on stock or custom?? What recovery do you have stock or CWM?? How did you flash the last kernel? ?
Insanity CM

Jason123420 said:
What rom were you on stock or custom?? What recovery do you have stock or CWM?? How did you flash the last kernel? ?
Insanity CM
Click to expand...
Click to collapse
i was using using Darky's Rom previously and am using CWM. I haven't done anything since i first rooted it and flashed the kernel using Odin.
I then tried changing Kernels using the Darky Rom app, but i got these blue eyes that kept blinking every few seconds, i should of made a thread then cos i could at least using my phone for around 30seconds but i wiped data and now it gets Bootlooped with the Galaxy Splash start up.
I tried using CWM to flash but it gets an error.I'm gonna try again now and i'll edit the error into this post.
EDIT: I tried flashing 01_Darkys_v10.0_Extreme_Edition_RC3 and i get the error Amend scripting is no longer supported. Amend Scripting was deprecated by Google in Android 1.5. Was necessary to remove it when upgrading to ClockworkMod 3.0 Gingerbread based recovery, please switch to Edify scripting (updater-script and update-binary) to create working update zip packages. Installation aborted.
Would it be ok for me to flash to Darky's V10 again or should i just go to stock and carry on from their? but how should i do stock as i can't use CWM and it won't connect to Odin.

Flashing from one custom firmware to another

Hello guys,
actually I've darkysrom with darky kernel on my SGS but I want to change to another custom firmware, mainly because of ICS.
Can I flash the new cfw just by using clockworkmod? Because I remember that there was something concerning the kernel which was important before flashing to another cfw.
Do I have to disable the lagfix before flashing?

Yes you must disable lagfix to avoid problems with the new kernel.
Sent from my GT-I9000T using XDA

http://www.darkyrom.com/community/index.php?forums/pure-off-topic.13/
go here and here
http://hdtechvideo.com/community/index.php

Do I have to seperately flash another kernel or is that been done by flashing the cfw?

Disable lagfix, wipe (data, cache, daliv cache), Flash ROM via CWM, flash new kernel. If it gives you bootloop go to CWM and flash kernel again. It should work ;-)

Hi,
i tried to flash slim ics but something wrong happened. first i opened clockwork recovery and wiped everything. after that i tried to install from zip and choosed the base file of ics slim rom but there came a message which said that the installation was aborted. then i've read in the tutorial that one has to format the system but it still didnt work.
now the phone doesnt boot anymore but i can get to clockwork recovery. i recognized that it is a modificated version from darky with the name "cwm darkycore recovery" or something like that.
can someone please help?
EDIT:
ok the phone is back alive. i flashed darkyrom with odin.
but i guess the same will happen if i try to flash slim ics again so there must be another way right?
EDIT2:
i got it. just installed the cm9 with cwm darky core recovery and after that installed slim ics.

if you've got to the trouble of odin-flashing the darkyrom back ,why didnt you just flash something else ?
http://forum.xda-developers.com/showthread.php?t=1494493

Can't flash from philz recovery

Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.

get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work

Iconia500 said:
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
Click to expand...
Click to collapse
When u flash kerenel u have to reboot into recovery so that flashing could take effect.
PhilZ JB kernel's are safe to wipe and philZ kernel's are best for TW based ROM's.
So if u running CM10,CM10.1,AOSP,AOKP,PA ROM's u shuold look for Hydra,Franco,etc..
And make sure that u reboot into recovery when u flash kerenel...

nokiamodeln91 said:
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Click to expand...
Click to collapse
Hi thanks for the reply, I managed to flash the kernel with mobile odin, but I'm still unable to flash in cwm.

Are you able to format system with other kernel?

nokiamodeln91 said:
Are you able to format system with other kernel?
Click to expand...
Click to collapse
Yes and I always do before flashing a rom.

Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz

nokiamodeln91 said:
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
Click to expand...
Click to collapse
Thanks for your help anyway, at least I'm on the latest philz kernel now.

[Help/SOLVED] Flashed a Kernel & now cant access phone!

I was playing around with a few roms and kernels, I then got CoCore 6.8 and flashed it through CWM onto ParanoidAndroid and now I cant access my phone or go into recovery. When booting normally, android.phone Stops working and when booting into Recovery I just get a loading circle ( similar to the buffering circle on YouTube )
Thanks in advance.

fe

inthebank said:
Be more specific: flash from what rom and kernel?
You can read the thread about downgrading from JB to GB, it has all the details you need to start from scratch.
Click to expand...
Click to collapse
So I had the ParanoidAndroid 2.90 rom, then I flashed CoCore .8 using CMW onto it and now I cant accces either my phone or recovery.
Trying to go back to stock with Odin now.

PA is cyanogenmod based, and such ROMs only work with cyanogenmod based kernels. On other words, cocore is just for stock roms. You mix both of them and you'll end up with what you have right now...
Flash everything again with odin and you'll be fine!

juanchotazo99 said:
PA is cyanogenmod based, and such ROMs only work with cyanogenmod based kernels. On other words, cocore is just for stock roms. You mix both of them and you'll end up with what you have right now...
Click to expand...
Click to collapse
Okay, I got the tock onto it but its stuck in Bootloop :/
Will I be able to just flash CWM and go back to a Backup without using odin to reinstall the stock ?

Okay, I managed to get CWM up and running, currently im restoring a Backup from this morning.
// Problem solved, restored perfectly and works now. Thanks for the help