Database Develop

[Q] Battery Calibration - reboot?

I recently installed Serendipity and made sure the battery was at 100% while doing so (and deleted the battery file). I'm waiting for the battery to drain before I plug it in. Am i supposed to let it charge all the way again? Also, is it safe to reboot the phone while it is draining the first time? I want to install something using clockwork.
I'm being careful about this because cognition would report 14% battery life after 33 minutes of display usage and display eating up 96% of my battery....

killsto said:
I recently installed Serendipity and made sure the battery was at 100% while doing so (and deleted the battery file). I'm waiting for the battery to drain before I plug it in. Am i supposed to let it charge all the way again? Also, is it safe to reboot the phone while it is draining the first time? I want to install something using clockwork.
I'm being careful about this because cognition would report 14% battery life after 33 minutes of display usage and display eating up 96% of my battery....
Click to expand...
Click to collapse
There's a complete thread on this, I suggest you look it up.
After you reset your battery stats, it is suggested to do a few full battery circle (use til dead, full charge, rince and repeat). You should be fine after 2-3 circles.
Note tho that it will not improve your battery life. All it does is a attempt to tell your phone what % your battery life is exactly.
For your fast drain, I don't think it has anything to do with your battery calibration or your ROM. It's most likely a app (or a few) that are draining alot of juice or that are running w/o realy being needed. (Check your running services.. make sure you know which one to stop and not to***)
Also using a app/widget like advanced task killer can help your battery life as it will stop every app running with a simple touch. I suggest doing it anything you're not using your phone.
One last thing, display eating 96% of your battery is normal.. it's not telling you it's using 96% of your battery. It's telling you that during the time your phone as been unplugged, your display use was your main action.. probably cause you didn't make many calls or anything else.. Display is just about everything you do with your phone so it will always have some high numbers like that.

BWolf56 said:
There's a complete thread on this, I suggest you look it up.
After you reset your battery stats, it is suggested to do a few full battery circle (use til dead, full charge, rince and repeat). You should be fine after 2-3 circles.
Note tho that it will not improve your battery life. All it does is a attempt to tell your phone what % your battery life is exactly.
For your fast drain, I don't think it has anything to do with your battery calibration or your ROM. It's most likely a app (or a few) that are draining alot of juice or that are running w/o realy being needed. (Check your running services.. make sure you know which one to stop and not to***)
Also using a app/widget like advanced task killer can help your battery life as it will stop every app running with a simple touch. I suggest doing it anything you're not using your phone.
One last thing, display eating 96% of your battery is normal.. it's not telling you it's using 96% of your battery. It's telling you that during the time your phone as been unplugged, your display use was your main action.. probably cause you didn't make many calls or anything else.. Display is just about everything you do with your phone so it will always have some high numbers like that.
Click to expand...
Click to collapse
Yeah, I've seen the thread before but forgot about it. Thanks for reminding me. And my point about the display was that it was on for such a short amount of time, yet still killing my battery.
I am now down to 30% or so after 3 hours or more of display time after calibration & rom switch- and I was streaming music through WiFi and using Bluetooth headphones. So it it seems like it made a huge difference =D
Thanks

[Q] Why in Battery stat "display" is showing 98%

Dear Android Community,
Overcome-day to all!
I've upgraded to "Overcome-Jupiter" 3 days back and though admittedly the new ROM is smooth and fast I believe am noticing some irregularities on the battery.
I have a question and situation, wherein in battery statistics is is show that "Display" is using around 96% of the batter, all other task including the "Android system which is only 2% is for the remaining 4%.
Furthermore for a full charge, am getting around 14-17 hours usage on the batter.
I've done a "battery wipe" and have done two discharge cycle.
Any other Galaxy tab7 user here having the same issue, your comment, suggestion and recation on my query is greatly appreciated.
Thanks in advance.
Xmen88
Overcome-Jupiter proud-user

As for display that is normal since Froyo especially with heavy use, the beast display consumes the battery more than anything. As for the battery life if its on moderate to heavy use that seems quiet normal even good actually (remember official stock firmware gives you 7hrs on heavy use). Finally read the tips and tweaks section on our website for more info.

I have heavy drain on the battery after upgrading from Hermes to Jupiter. (All apps and setting being similar)
I can get only close to 5 hours of continuous usage compared to about 7 hours on Hermes. You're not the only one to be affected...... I've posted my cries for help :
http://forum.xda-developers.com/showthread.php?t=1176978
I'm still monitoring to see if there's improvement after a few charge cycle.

Darkpal,
Thanks for the quick reply, I have to agree with you on the display thing. What I wanted was actually, just a confirmation from other users that they are having the same battery statics. This will then confirm that everything is normal with my "precious/fragile SGT".
I will do further testing and monitoring.
To PCdumb,
Cheer-up buddy, still I believe our SGT is one of the best tablet out there. ADB and the Overcome team can only do so much nho.
To Darkpal,
On a final note, will the "app lucher" (am using "go launcher EX") will have and effect on battery usage, any launcher you can suggest.
Thanks again for the help

Launchers if coded correctly shouldnt have that much impact if at all on the battery. I personally am using the stock launcher only because am too busy or lazy to configure ADW launcher EX which I have an recommend

DarkPal said:
Launchers if coded correctly shouldnt have that much impact if at all on the battery. I personally am using the stock launcher only because am too busy or lazy to configure ADW launcher EX which I have an recommend
Click to expand...
Click to collapse
Darkpal,
Thanks again friend/sadiq,
Am hearing good review on "ADW launcher", i'll try this and will let you know if there will be any improvement in battery consumption.
Again thanks and best regards;
Xmen88
Overcome-Jupiter Proud-User

battery % weird
Hi. I have a strange question in relation to the topic. I use a P1000 running Gingerbread (stock no mods). I hope you guys have some solution to share to me.
I had Battery Monitor installed so I can check the battery usage and percentages, and Juice Defender Ultimate to you know, save juice.
1. There are few instances that when the unit still has 10% or below power, I sometimes encounter unit shut down (powers off) while I am browsing. So I turn it on again, the Samsung animation appears, but still turns off. Therefore I am forced to charge it (using mains plug). Is that normal?
2. Coming from a critical low battery (5% or lower), with the unit off, I leave it charging (using mains plug) until the battery goes full green (full). 4 hours or so if I am not mistaken. When I turn it on, Battery Monitor displays only 76% or 81% power.
I find that strange since it is supposed to display 100% right?
3. At 76% or 81% while unit on, I plug it to charge again, but does not increase percent anymore.
4. Upon my gut assessment, the unit still performs normally, the standby time and usage time are still as expected, the battery is working fine.
TO DO:
I am thinking to just clear data and reinstall battery monitor.
I am also thinking to install another battery application to display percentage for comparison.
In any case, is there a way to calibrate the unit when turned on to display 100% when it is really full when charged off?
I am not modding or rooting it, I am just a basic user. Any ideas? Thanks!

jtdc said:
Hi. I have a strange question in relation to the topic. I use a P1000 running Gingerbread (stock no mods). I hope you guys have some solution to share to me.
I had Battery Monitor installed so I can check the battery usage and percentages, and Juice Defender Ultimate to you know, save juice.
1. There are few instances that when the unit still has 10% or below power, I sometimes encounter unit shut down (powers off) while I am browsing. So I turn it on again, the Samsung animation appears, but still turns off. Therefore I am forced to charge it (using mains plug). Is that normal?
2. Coming from a critical low battery (5% or lower), with the unit off, I leave it charging (using mains plug) until the battery goes full green (full). 4 hours or so if I am not mistaken. When I turn it on, Battery Monitor displays only 76% or 81% power.
I find that strange since it is supposed to display 100% right?
3. At 76% or 81% while unit on, I plug it to charge again, but does not increase percent anymore.
4. Upon my gut assessment, the unit still performs normally, the standby time and usage time are still as expected, the battery is working fine.
TO DO:
I am thinking to just clear data and reinstall battery monitor.
I am also thinking to install another battery application to display percentage for comparison.
In any case, is there a way to calibrate the unit when turned on to display 100% when it is really full when charged off?
I am not modding or rooting it, I am just a basic user. Any ideas? Thanks!
Click to expand...
Click to collapse
Try to reflash or factory reset then monitor the battery without installing the battery monitor.
I use "battery doctor to save battery" from the market. You can try that but try first without a battery monitor app.
did you try to use another usb cable? or perhaps your charger is not the original? loose internal battery connector? there are so many factors that might cause your problem not mentioned.

bongski55 said:
Try to reflash or factory reset then monitor the battery without installing the battery monitor.
I use "battery doctor to save battery" from the market. You can try that but try first without a battery monitor app.
did you try to use another usb cable? or perhaps your charger is not the original? loose internal battery connector? there are so many factors that might cause your problem not mentioned.
Click to expand...
Click to collapse
Thank you for the reply bongski. Without any battery monitor app, the problem is I cannot see percentages. But anyway I will do the factory reset, it is another option but I find that drastic and will be the last choice. Also, the USB cable and the charger is the one that came with the Samsung box so they're original. The loose internal battery connector is a bit far fetched, the battery is not user accessible and also the unit is not dropped and carefully handled.
Hopefully I get accurate readings, I will update here.

The battery percentage is in settings/about device/status/battery level.
Sent from my GT-P1000 using Tapatalk

bongski55 said:
The battery percentage is in settings/about device/status/battery level.
Click to expand...
Click to collapse
ok. well i did the following
1. clear data and reinstall battery monitor.
2. install another battery application to display percentage for comparison.
i tried the battery doctor but provided the same percentage reading.
so i just factory reset the thing, and i am observing now (ie. charge later and see if the issue persist). i've no knowledge on how to reflash the thing.

well ok to clear all my doubts i just factory reset it. then i reinstalled my initial apps (including battery monitor), used it til it died (1% until it off itself). plugged to mains, turned it on, and let it charge while ON (of course screen is off). took 174 minutes (3 hours) when it reached 99% and stayed 99% (looks like it does not touch 100%) 4176mV. after 5 mins of non use, it still remains 99% but at 4012mV. with the 1% missing, i guess i can let that go and dismiss as normal now... although i read related thread
http://forum.xda-developers.com/showthread.php?t=866011
and some resetting technique here
http://forum.xda-developers.com/showthread.php?t=921848
but anyway my simple mind would just like to say, "ok its displaying normalcy now".
now i did not figure what caused the tab to display erratic behavior before this, but once i got it i will update again.

Method to improve battery life

Hey guys I just picked up the Thrill the other day, and like others I've realized the battery life is horrible on this phone not to mention when I reboot the phone would take a 10-15% out of the battery. Coming from an Atrix I decided to try the battery fix for the Atrix since it worked for me in the past, well after following all the steps in the guide it seems my phone reports the battery more accurate and battery life is better but your mileage will vary. Reboot doesn't take 10-15% out of the batter percentage either so here is the guide and link to the original thread, all credits go to xploited.
PS.. I followed all the steps except for flashing the jug6ernaut's CWM battery fix since it is for gingerbread roms
Link:http://forum.xda-developers.com/showthread.php?t=1198333
Guide:
Standart disclaimer: I am not responsible if you break things by following this guide, though I will be genuinely surprised if you do.
Credits: This fix is a combination of battery management techniques discussed in the Atrix forums + a technique that I originally found in a Milestone forum (I didn't invent it, but I am too lazy to search who originally posted it ).
This worked in fixing the problem for me (the same problem that I see many others are writing about on the forums), but I can't guarantee it will work for you.
Who should use this? (aka your battery problem symptoms are
1. Battery life on 2.3.4 is significantly worse for you than before.
2. Battery stats are jumping and showing inconsistent information.
3. Your phone loses 30%-60% just by sitting there overnight.
4. Phone idle draining 30%-60% of battery just by sitting there overnight.
5. After flashing a couple of roms, your battery stats got messed up and the phone thinks it's at 100% charge while it's not.
I personally started having battery problems after flashing a couple of roms, applying 1% battery mod and despite flashing jug6ernaut's CWM battery fix.
When I went to bed with a 100% charge, I would wake up to a 50% charge, with Phone Idle process showing up as massacring the battery. The steps below successfully fixed the problem for me.
Prerequisites:
1. Atrix on one of the rooted 2.3.4 roms (ideally,- deodexed and with unlocked CWM)
2. Wall Charger
3. jug6ernaut's CWM battery fix (put it on your SD card you will need it later!) I have also attached it to this post.
4. Battery Calibration app from the market
5. Watchdog Lite or Full from the market
Instructions:
It's best to complete this procedure in the evening before going to bed, so you can leave it at 100% overnight and check in the morning if the drainage issue is fixed!!!
The whole procedure along with recalibration might take up to 5-6 hours!
1. Take the case off your Atrix (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your Atrix to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. (Explanatory pic, needed number circled in red). Write it down.
My Atrix was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your Atrix completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%. Back when I used a Milestone, it usually showed 60% after doing this.
10. Let it sit there charging for 2-3 hours.
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours, turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Install jug6ernaut's CWM battery fix (even if you had it installed before), do not reboot yet.
Do not disconnect it from the charger still!
13. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
14. When the phone turns on, go into BatteryCalibration app again and look up your MV numbers
- if you were like me, they should be significantly higher than before. After this whole process I had 4200MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
15. Before going to sleep - Install Watchdog from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
16. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
17. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
(Your general battery capacity should have increased, even if something still was draining the battery, you will be able to find the infringing process in WatchDog with the settings we've set up in step 15 )
Click to expand...
Click to collapse

Not a bad process. I did something similar. Main part is Watchdog and finding out what's draining your battery. On my phone the infringing process is "Suspend". Now, if there were an app that was keeping my phone from suspending and running up the process it would be an easy fix but unfortunately the process with the highest "partial wake" battling my "Suspend" is the "dialer" so unfortunate I'm just gonna have to wait for GB since I have no interest in Rooting or installing roms at this point.

I'll give this a go. Thank you

When I'm killing my phone,
It says:
3% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
Lulwut?
Sent from my LG Thrill 4G

The Dark Lestat said:
When I'm killing my phone,
It says:
3% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
1% Battery Remaining
2% Battery Remaining
Lulwut?
Sent from my LG Thrill 4G
Click to expand...
Click to collapse
lol seems like your phone doesn't want to die

nexendz said:
lol seems like your phone doesn't want to die
Click to expand...
Click to collapse
It did that for an hour then FINALLY reached 0% haha

Drain while standby

my note is draning 1 percent every 10 minutes
when in standby
after downloading cpu spy i discovered that deep sleep was 1% and 200MHZ was 84%
it has something to do with it?
also in battery usage
android os is 57%
any fix?
by the way
im running ics stunner rom

The Note's battery is a POS... If you want to partially solve it you'll have to keep both wifi and data off.

i kind of found a way now deep sleep is on
but what do you mean POS

Have you changed anything in the last days? Installed any suspicious apps, or changed any settings?
If you found the problem now, then maybe you can also calibrate your battery just in case it "lost" some performance. To be sure!
Use Battery calibration or wipe Battery stats in Recovery, Anvanced menu (after you fully charged your device).

[Q] Battery Percentage.

I'm Currently On Apocalypse Rom. I'm having Battery percentage issue.
I Charged 1Minute it can direct boost up to 100% Which mean it show Charged but when i plug off - the battery percentage drop directly. Anyway to fix this?
even i charged for 1 night, the battery can last only like 8hours.
The battery is new :O
i need real battery percentage =X

Search the market/ play for an app called "battery full notification"
It's light weight and non-invasive and will tell you when your battery its actually charged (your phone normally will say 100% long before it has competed it's charge. The only other way to tell if it has completely charged that i know of is to go to settings> about phone> status. The app has many options to let you know without disturbing you. Check it out.
Also, when you install a new ROM, do it with a full battery. You can help by calibrating your battery with an app or:
When your phone runs out of battery and dies, boot to recovery and wipe battery stats in the advanced menu of cwm. If you don't have enough charge to do this charge for a few seconds then boot to recovery.
Charge your phone until full and that's it.

Your battery on your ace is not great and if you use your phone as much as I do, 8 hours isn't bad!
I use my phone LOTS!