Database Develop

[Q] From an old ICS Stunner ROM, to a new CM9/10 ROM

It's been a long time since I was last seen here, I've been busy working and studying, but now that it's vacation I'd very much like to update my ROM.
Currently I'm on Kernel version: 3.0.15-I9220ZCLP5-CL295568
And my ROM is ICS Stunner Beta 5.0 (yes, a pretty old one)
CWM: v5.0.2.7
So, the question is.. How do I get from that ROM, to a new, updated one?
I've been looking around but there are no specific guides on how to do this.. And I rooted mine back when I was on 2.3.4.
Honestly, I have no idea what I should get back to before putting a new ROM over it.
It'd be great if any of you could help me out describing how it's done! I would really appreciate the effort.
Thank you in advance, and hopefully I'll be able to get the best out of my Note again after this!

Use PC Odin to flash a stock gingerbread ROM, then root and install clockworkmod recovery, download and place whatever ROM you'd like to flash on your external sd card or internal memory, lastly boot into recovery (hold volume up + home + power buttons) and factory rest, wipe cache partition and dalvik cache then flash the ROM and reboot.
Sent From An Awesome Jelly Bean Galaxy Note

Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!

Lanarix said:
Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!
Click to expand...
Click to collapse
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history

Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.

Bump .

Nobody has an answer for me? Please?

Lanarix said:
Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.
Click to expand...
Click to collapse
I just explained to you the "100% safe way" to go from a stock ics rom to a custom rom in my last post. Stock gingerbread first through pc odin, root, install clockworkmod recovery, flash custom ics/jb rom of choice.

Lanarix said:
Nobody has an answer for me? Please?
Click to expand...
Click to collapse
Follow these instructions.
If you have CWM installed and your device have full root.
Reboot into CWM Recovery
Install a safe kernel (hardcore, notecore, cf root, franco etc) or flash abyss 4.2 redpill recovery.
Reboot recovery
Now full wipe for a clean install.(cache/dalvik /data)
Flash rom
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?

+1 I would hold off on the Jelly.....nothing exciting now. Give it a little more time....like another 3-5 updates I flashed CM10 and lasted 10mins before I came back to ICS. :good:
abhisahara said:
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history
Click to expand...
Click to collapse

Lanarix said:
So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

Flash problem

Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?

max_x said:
Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?
Click to expand...
Click to collapse
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...

rajamahbub said:
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...
Click to expand...
Click to collapse
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?

max_x said:
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?
Click to expand...
Click to collapse
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app

Sorry if I interrupt, but i have a quite similar problem. My SGS DOES boot though, and works okay... BUT it isn´t recognized proberly by my pc(although having all drivers installed) tried reinstalling both drivers and whole OS. Also tried other computers and cables. Phone boot fine in download and recovery mode but isn´t recognized by Odin, heimdall, oneclick etc.? My question is as following: Is it in anyway possible to grab a OTA/STOCK .zip to flash in Recovery 3e??
Thanks

rajamahbub said:
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
first I do this http://www.theandroidsoul.com/downl...mware-update-galaxy-s-i9000-to-android-2-3-5/
then this http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
then i rooted it and install cwm like this http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/
and then I copy slimbean 2.2 and 2.3.0 and when I'm in recovery I cant go immediately on 2.3.0 because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work

max_x said:
because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work
Click to expand...
Click to collapse
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page

xsenman said:
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page
Click to expand...
Click to collapse
but when i flash semaphore kernel i don't get root

When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you

Latrop said:
When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
thanks

[Q] How to upgrade GB to JB?

Hi Guys,
Can someone guide / help me on how to upgrade my N7000 unit to JB and still rooted.
I'm still using GingerBread ROM with AbyssNote Kernel and already Rooted. Also installed with CWM
I want to know the step in upgrading it to Custom JB ROMs (MKalter JB, RocketRom)
Any suggestion will greatly appreciated.
Kindly refer on the images regarding details of my beloved SG Note
Thanks

You can not go from gingerbread to jb.
You need to download an ics rom ,like rocket with root and cwm. Do full wipe. Flash ics rom.
If that's cool download eybees jb
Full wipe and flash that .if root has gone open up SU and update the binary. The app will do this .just press on it .
Do not try skipping the ics . You will brick your phone ! Hope I helped
Sent from the man in Your attic.....

who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first

itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7

You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..

chasmodo said:
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7
Click to expand...
Click to collapse
Ill dig the quote out
Sent from the man in Your attic.....

howard bamber said:
You can not go from gingerbread to jb..
Click to expand...
Click to collapse
howard bamber said:
Ill dig the quote out
Click to expand...
Click to collapse
No need...its simply not accurate information
Sent from my GT-N7000 using Tapatalk 2

nhivlem said:
You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..
Click to expand...
Click to collapse
That's correct, all you need is safe kernel.
Sent from my GT-N7000 using xda premium

itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
i agree!! i've done that several times to flash from gb to jb using abyss kernel (just a personal preference); there are other safe kernels to flash from.

Successfully Flashed Custom ROM
From GingerBread 2.3.5 upgrade to Jelly Bean 4.1.1
This is what I've do:
1.Flash Abyss Kernel (Many Thanks to Chasmodo)
2.Reboot CWM Recovery
3. Wipe Data
4. Wipe Cache
5. Mount/System -> Format/System
6. Advance/Wipe Dalvik Cache
7. Wipe Battery Stats
8. Fix Permissions
9. Flash Rom RocketRom V1 - (Many Thanks to Eyebee)
10.Reboot (it will reboot by itself) - wait for at least 2 - 5 mins
Lastly Wait and do the Gangnam style ^_^
Note: you MUST have a safe kernel in performing this.
Many thanks to all the guys who reply to this post
Many thanks to XDA!:good:

Congrats
Back up your EFS now using k-tool
Sent from my GT-N7000 using Tapatalk 2

Thanks for the info - asf58967 :angel:
Backup and verified my EFS done.. :highfive:

flash hydracore kernel with mobile odin or if you can deal with triangle with pc odin and then you can flash whatever you want.

caution. hydracore might not work with this rom

nokiamodeln91 said:
caution. hydracore might not work with this rom
Click to expand...
Click to collapse
Present HydraCore kernels will most certainly NOT work with the JB leak Rom.

[Q] Can't understand how te change beetwen ROMs

Hi. Totaly new here. I just rooted my phone and installed cm9 so that i could install paranoid. I also installed hydracore kernel after paranoid rom. I could do all this because it was all explained. Now I found new rom TMT 4 to instal, but I am afraid to install it because I don't know and don't understand when you can change roms.
Please help me understand how to change (what i have to do before changing roms)
Thanks

kjerkoli said:
Hi. Totaly new here. I just rooted my phone and installed cm9 so that i could install paranoid. I also installed hydracore kernel after paranoid rom. I could do all this because it was all explained. Now I found new rom TMT 4 to instal, but I am afraid to install it because I don't know and don't understand when you can change roms.
Please help me understand how to change (what i have to do before changing roms)
Thanks
Click to expand...
Click to collapse
Same as you installed cm9 and and PA.. Save the rom to your sd card, go to cwm wipe data/cache/Dalvik cache and the flash the rom
Tapatalking on my n7000

msedek said:
Same as you installed cm9 and and PA.. Save the rom to your sd card, go to cwm wipe data/cache/Dalvik cache and the flash the rom
Tapatalking on my n7000
Click to expand...
Click to collapse
So always when changing roms (any rom) just wipe/cache/dalvik cache and install the rom? should I leave hydracore kernel?
Thanks

no need to change. be on that kernel. its safe.
Sent from my GT-N7000 using xda premium

I still don't understand because something just happened to my phone. I had rocket jb rom v2 and I wanted to go back to paranoid android. for that I first had to install cm9 (right???) So I wiped data, cache, dalvik and then try to install cmp zip. after 10 sec reported that the instalation stoped and the Android robot had a red triangle inside.
Then I went back and did everything the same, but instaled back rocket jb rom v2 and it worket. Where did I go wrong???
Want to go back to paranoid utacka

what was cmp.zip?
I guess it was cm9, try this
format/system
format/cache
format/data
format/preload
install zip-point to the new rom
Sent from my GT-N7000 using xda premium
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
flash the pa directly
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
what was cmp.zip?
I guess it was cm9, try this
format/system
format/cache
format/data
format/preload
install zip-point to the new rom
Sent from my GT-N7000 using xda premium
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
flash the pa directly
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
sorry, but can't understand any of it. I am tottaly new here. sorry for inconvinience ( are all this things in recovery mode - vol up, home, power?)
I didn't see any format data, cache. (can you tell me from point to point please) 1. click this, 2. click that The file is cm-9-2012090...TLY-n7000.zip
Thanks

Once boot into recovery
go to mounts and storage
the the format commands I described earlier.
Go back
install zip from sd
point to the cm9 rom

nokiamodeln91 said:
Once boot into recovery
go to mounts and storage
the the format commands I described earlier.
Go back
install zip from sd
point to the cm9 rom
Click to expand...
Click to collapse
didn't work. i've done everything like you said.
it said: instalation aborted ( red triangle in Android robot)
What can I do to get Paranoid Utacka?
Please help. I am getting really paranoid about bricking my phone.

I guess the rom you have downloaded is corrupt then. First re download the rom and then match the md5

nokiamodeln91 said:
I guess the rom you have downloaded is corrupt then. First re download the rom and then match the md5
Click to expand...
Click to collapse
so I have to download another cm9 rom and install it like you said?
format everything like above?
What is md5?
Sorry for causing you trouble with my unknowledgement

Also you try to flash a stock ROM with odin and reinstall paranoid as you did the first time. There is no need to install CM9 before Paranoid android.
Here you can find all stock rom and the procedure to install and root installing a safe kernel.

andreaonelove said:
Also you try to flash a stock ROM with odin and reinstall paranoid as you did the first time. There is no need to install CM9 before Paranoid android.
Here you can find all stock rom and the procedure to install and root installing a safe kernel.
Click to expand...
Click to collapse
on Paranoid utacka rom it says:
Make sure to run CM9/10 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!

please help, I am stuck with rocket jb rom

as I said before, there is no need to be on cm9, just download the pa rom and flash it using the procedure above.
md5 is a checksum created when the dev creates the rom. when you download the rom, use a md5 check to verify that the rom you downloaded matches the md5 provided by the dev to make sure you have a genuine download.

I think my phone is damaged, because again it showed red triangle in the robot when I tried to install ne rom (paranoid utacka).
I formated all that you said and tried to install new rom and nothing
What is wrong??????????

and md5 check is the same as Utacka posted

can you paste a pic of that red DROID you talking about

I DONT WANT TO MESS MY PHONE
dont you rhink it will damage it after many problems?

I don't know. You have been talking about that red DROID so was curious to see.

RemICS

Hello guys,
i have succesfully flashed the new RemICS rom. It's works fine. When i will install the new addonpack, it's still show the bootanimation. I wait for 30 min but nothing happened. I try it 3 times but nothings change. I come from ICS 4.3. Can anyone please help me out?
And yes... I follow the installation steps.
Rom link: http://forum.xda-developers.com/showthread.php?t=2427514
Thanks,
Marvin
PS: Sorry for my bad english.

Did you try to do a full wipe?
Sent from my GT-I9001 using xda app-developers app

KiLLAH89 said:
ICS 4.3
Click to expand...
Click to collapse
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?

käsebr0t:45552591 said:
Did you try to do a full wipe?
Click to expand...
Click to collapse
Yes everytime i flashed it.
tetakpatak said:
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?
Click to expand...
Click to collapse
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.

KiLLAH89 said:
Yes everytime i flashed it.
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.
Click to expand...
Click to collapse
It is just name of the ROM, and the developer writes you clearly in the first blue field, in the first text line:
Android Base CM10.1.3. RC1 JellyBean
JellyBean is not ICS (ICS is 4.0.x) so you need Gapps for CM10.1x / Android 4.2.x
CyanogenMod 9 is based on ICS

HELP needed for RemICS Odin installation
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:

[email protected] said:
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:
Click to expand...
Click to collapse
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD

thx for reply
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Soryuu said:
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

[email protected] said:
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Click to expand...
Click to collapse
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD

Here is where my noob-ness kicks in.
What internal storage is available by default on the Note1? Is it just the internal sdcard?
what puzzled me when I last flashed with odin (repeated it a number of times as I was trying to get the device to recognise ext sd card) to get the current Darky Extreme rom on (which is working fine no problem at all) is that there was still some relic directory structure left over. These were all empty folders visible when navigating within CWM. Didn't matter what type of formatting I did they wouldn't go. To summarise: much confusion and something got twisted.
So questions arising are:
-How to nuke the internal disk/card properly so there are no remnants prior to me doing another darky reinstall?
-Then, how to copy a zip file to internal card but still have it remain after the format and wipes that would precede a zip install?
-How to fix the device to mount the ext sdcard? FYI other sdcards can't be mounted either. I have tried 4 different ones. And here's the kicker-once booted I go to file manager and there I can see and access all the files/folders on the external card!!! So it's definitely a phone problem as opposed to a sdcard problem. Something got flagged along the line.
Rgrds
Lawrence
Soryuu said:
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse