Related
Hello everyone,
Alright, I've just updated my phone to the latest version Androind 2.2.1 JPY.
I was following the guide for installing Darky's ROM, but my pc doesn't show anything when I connect my phone.
I have up-to-date drivers.
When my phone was on 2.1 JM2 it was working.
I have no idea what the problem is.
I really appreciate the help and thanks in advance.
-Mick
Hi i have a similar problem, i have to connect it about 3 times for it to recognise, i am on darkys rom. anyway try this:
go into settings - wireless + networks - USB settings and select ask on connection. then try it again.
I'm not on Darky's rom yet since I can't connect to my PC.
I've just tried that a couple of times but didn't work.
does the phone connect when in download mode ? try a re flash if it does...
It does not, it also doesn't show up in Odin.
does the pc make any sounds when usb is connected ?? are you sure its not the usb cable thats at fault here ??
No sound at all. But like I said, it worked when I was on 2.1. So it's not the USB cable.
Uninstall Kies .
Reboot and reinstall Kies to give you USB drivers .
If your phone works and is set to USB mode Mass Storage connect cab;e and windows will pick up phone .
jje
Just tried it, but it didn't work.
try a stock rom
I am on a stock rom. A fresh JPY 2.2.1.
Still stuck with this problem.
have you tried a different port on the PC ? if that doesnt work u will have to try another cable to find out if its the phone or not... have u done factory reset in recovery
Yes, I've tried all the ports on my PC.
The cable is fine, because it worked just before I updated.
I'm going to try a factory reset right now.
EDIT:
Factory reset didn't work. Should I try a re-flash?
EDIT2:
Just remembered I can't do a re-flash since I can't connect to my PC whatsoever.
Did I brick my phone?
I have the same issues but I have flashed several roms none the less. I gave up on the PC after serveral PC's and several days. I think it may be a usb hardware issue as I did connect to Kies once and the PC once but then I tried the next day and I've never gotten it back on despite countless driver reinstalls, android SDK adb attempts, odin, heimdall etc...
So to flash I first installed clockwork mod as an update.zip (put it in the root folder, then boot up in recovery - you'll need 3 button mode working I think). This was in the instructions for the first VoodooDoctor rom I flashed.
I also highly recomend also getting steam recovery (mine was part of a rom so I don't know the XDA link) as it allows flashing roms that are stored on the SD card. which is handy for me as that is the only way to get something on the phone if the flash goes sideways and I didn't already have it in the root folder. It is accessible now as the update.zip in my root folder and so I can run it from clockwork.
Clockwork allows you to flash from the phone - no odin needed. Steam does the same but steam is newer so I've mainly stuck with CWM except when I had to figure out a way to fix a bad flash....
I made this post about my near death (of my sgs)
http://forum.xda-developers.com/showthread.php?t=929020
I'd still stick with the tried and true as its a little nerve racking to flash knowing that you need some function on the phone to recover but if you are dying to try a good tested custom rom I'd encourage you do so.
G
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
Hi all, I have scoured the web for similar issues and can't find any answers
-Captivate I897 running 2.1 formerly mounted to my MAC just fine, rooted using Galaxy-S one click root. Root was successful, mostly just removed bloatware, etc.. but alas my phone is no longer recognized by the computer, although the phone recognizes that it is connected, when I click "mount" nothing happens on the computer's end.
-Appears to be a problem with the phone, I have tried Win7 w/ Kies mini and installed/reinstalled drivers, dev mode, etc...nada. And here's the kicker - these machines will recognize and mount my GF's unrooted Vibrant just fine.
-I have a separate micro SD card reader that can read the SD card out of the phone that way.
-So, I am hoping for some help to either
1 - fix the computer recognition issue, or
2- find steps to manually update to 2.2 or unroot, etc, any ideas that will get me running 2.2 and hopefully mount to Mac or PC, using files manually loaded to the SD and installed during recovery mode, this looks like flashing, would Andromeda or Cognition fix the connectivity issue?
Thanks in advance!!
If you're rooted and can get into download mode (power off+2 volume buttons+plug usb in) then you can use this link ----> http://www.megaupload.com/?d=QL6NX702 to flash stock 2.2 firmware. Note: This WILL break your root. Here's the thread on Odin One Click as well---->http://forum.xda-developers.com/showthread.php?t=731989. You probably want to read the information there before flashing to 2.2.
Good Luck!
Thanks for the suggestion, I've tried multiple drivers, but since my PC doesnt recognize my phone, both Odin or Superoneclick dont recognize my phone also.
I was able to manually unroot by copying the One Click Root Update.zip to my phone via Wifi File-sharing app. Unroot was successful, but still no connection to PC or Mac.
I'm stuck for now, It appears that any type of flashing requires a PC connection, unless there is some way to flash completely with Wifi-copied files and using the 'reinstall packages' option?
Well, if you have a dropbox, you could drag and drop a rom (say cognition) onto your phone's dropbox. Then you'd need to find a CWM recovery (make sure it's not 3.0) update.zip and reinstall packages. This will give you CWM recovery, from which you could install Cognition from your dropbox. No guarantees it will work, but it's worth a shot.
Can't help on the Mac and I only have a dim memory of 2.1, but what are your setting under Settings/Applications for USB settings and Development? Do you have USB debugging checked (on)? Do you have the Development settings set to something weird like Kies update?
My recommendation is to put USB debugging on (checked). In that case I think the USB settings choice is disabled and therefore ignored. Then when you connect to the computer you will get a message in the notification bar on your phone saying something like "select to copy files to/from the computer". Click that, then click the mount button. You should then be able to see the extra drives on your computer by looking under My Computer or whatever (on a PC). On mine they are F and G, no special indications that they are drives on an attached phone. I also do get an automatic pop-up for the new drives, like when you insert a USB stick, but I imagine that setting could be disabled so look for the drives manually.
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Sent from my I897 using XDA App
do u have the drivers installed?
Mr.AdAbsurdum said:
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Click to expand...
Click to collapse
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
flashed without a cable
Thanks for the tip jomeister 15, I was able to flash new roms dropped over wifi with CWM recovery. This got me onto 2.2 which was the main purpose of this whole adventure. I just loaded Andromeda3 and it's pretty darn impressive.
My PC and Mac still do not recognise my phone, I troubleshot extensively like Snowake and nothing is recognized. I'm convinced its a hardware issue but who cares with wireless flashing and file transfer.
snowake said:
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
Click to expand...
Click to collapse
You could try to send a ROM, kernel, and update.zip(CWM flash) and attempt to get another ROM over it. Format the system, wipe dalvik, I don't think its a hardware issue, I had the same problem first time I tried using 1 click rooting, I just waited patiently and got a com port after about two days, so that just leads me to believe some configuration file was corrupted during flash to stock, possibly flashing a ROM or reflashing the ROM you're on with a complete wipe of the system and user data and whatnot, or possibly just doing a backup up from cwm and immediately restore it, if its charging I highly doubt its hardware
Sent from my I897 using XDA App
Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.
Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.
Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."
I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.
I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.
Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?
Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App
I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.
I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App
Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it
Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.
Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.
To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says
I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.
I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.
I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile
I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App
I really need some help here since I'm out of ideas.
WHAT LED TO MY PROBLEM:
I have had custom rom with custom kernel and everything on my x8, however one day after i changed SIM, i couldnt see anything in the notification bar which means no battery icon, no clock or anything. i could open it though and it WAS there.
So i restarted the phone again but this time it was bricked.
THE ACTUAL PROBLEM:
I used SEUS to recover the phone to stock and remove the brick however now the usb debugging doesnt work so i cant root my phone.
I go to settings and turn on USB Debugging and when i connect it to my PC, every program that i open says that the phone is connected with USB Debugging off. Restarting the phone didnt fix the problem...
I need help here since i dont want to use the Stock firmware, cuz IT SIMPLY SUCKS. Youtube isnt working and the UI is discusting (if you know what i mean)...
What should i do?
Check out the drivers that if they are installed properly or not....or else try to re-install your phone drivers
DeathNotice said:
Check out the drivers that if they are installed properly or not....or else try to re-install your phone drivers
Click to expand...
Click to collapse
I will try to uninstall SEUS and then reinstall it.
Btw i tried to do another recovery to stock. Still same problem.
There will b the same problem untill u didnot re-install your phonr drivers properly....and once installed thrn try to install ur stock recovery
DeathNotice said:
There will b the same problem untill u didnot re-install your phonr drivers properly....and once installed thrn try to install ur stock recovery
Click to expand...
Click to collapse
I uninstalled SEUS, then i went to device manager and uninstalled the drivers there. I rebooted and then installed drivers through the installer included in flashtool. Then i connected the phone to pc and it said that the ADB interface driver was installed. I opened flashtool but it still says USB Debugging off....
EDIT: Now i disconnected the phone and flashtool got messages saying that the phone is NOW connected in usb debugging mode, also says that busybox is installed.
EDIT 2: Fixed the problem, I had Bluestacks App Player running -.-
rapeandescape said:
I really need some help here since I'm out of ideas.
WHAT LED TO MY PROBLEM:
I have had custom rom with custom kernel and everything on my x8, however one day after i changed SIM, i couldnt see anything in the notification bar which means no battery icon, no clock or anything. i could open it though and it WAS there.
So i restarted the phone again but this time it was bricked.
THE ACTUAL PROBLEM:
I used SEUS to recover the phone to stock and remove the brick however now the usb debugging doesnt work so i cant root my phone.
I go to settings and turn on USB Debugging and when i connect it to my PC, every program that i open says that the phone is connected with USB Debugging off. Restarting the phone didnt fix the problem...
I need help here since i dont want to use the Stock firmware, cuz IT SIMPLY SUCKS. Youtube isnt working and the UI is discusting (if you know what i mean)...
What should i do?
Click to expand...
Click to collapse
try using the PCC to fix it
but if it didnt work for u just flash the stock kernel..it will make your phone back to normal again
of course in 2.1 condition
u can download from my signature :good: