Database Develop

[Q] Problem rooting Stock froyo captivate

Hi All,
I just purchased my Captivate yesterday from Costco (Expecting to still get the 2.4 Eclair) but unfortunately I got the Froyo 2.2 on my new captivate.
I tried rooting it using superoneClick and it just gets stuck on "Waiting for Device". I have drivers properly installed on my windows 7 64 bit machine (because I can use the phone and access its internal SD card).
Can anyone have suggestion or faced similar problems?
I have tried disabling/re-enabling usb debgging while it says "Waiting for the device"

Search the forum. There are a few threads floating around on different ways to root the stock froyo build. I don't know why the superoneclick wont work in your case but a search will turn up some info for you.

thanks. I will search the the threads and will post my results here in this thread for someone like me struggling with the same problem.

If you were planning on flashing a custom ROM after rooting anyway, you could use Odin one-click from download mode to flash 2.1 eclair, and then go from there.

Are you sure you are enabling debugging? I just used superoneclick on my phone last night after I flashe dback to stock.
First thing I do is change the phone in settings to - Ask on Connection, then I enable debugging.
Also you could try a different USB port on your computer and also make sure you have all of your necessary drivers installed.
I hope you get it figured out!

PeteSeiler2010: I haven't tried different USB port yet. I will try tonight and see if it goes through.
For usb debugging, I tried that as I mentioned. Let me just conform what I did. When it says "Waiting for device" for several seconds, I disconnected USB cable from either phone or computer (because it says that if you are stuck on "waiting for device", disable and re-enable usb debugging) because without disconnecting the cable, phone didn't let me disable the USB debugging..
So looks like I am missing something here??

22andy2 said:
PeteSeiler2010: I haven't tried different USB port yet. I will try tonight and see if it goes through.
For usb debugging, I tried that as I mentioned. Let me just conform what I did. When it says "Waiting for device" for several seconds, I disconnected USB cable from either phone or computer (because it says that if you are stuck on "waiting for device", disable and re-enable usb debugging) because without disconnecting the cable, phone didn't let me disable the USB debugging..
So looks like I am missing something here??
Click to expand...
Click to collapse
want a much easier method? install speedmod kernel using odin, reboot into recovery, advanced features (not the CWM version), and choose the option that says something like "root phone" and choose the "simple" option. congratulations, you are now rooted and running a custom kernel with CWM that can install a custom ROM.
next time, please do not post this in development as this has NOTHING to do with development. Q&A or general next time, please.

How did someone with no posts, post a question in this section? I thought you had to have a minimum of 10 posts to post in here.

I am sorry if I have missed that rule for the new posting but I am new (just two days old) into the android world and for the xda forums as well..

22andy2 said:
I am sorry if I have missed that rule for the new posting but I am new (just two days old) into the android world and for the xda forums as well..
Click to expand...
Click to collapse
So why is your join date Dec 2007?

CB650 Wolf said:
So why is your join date Dec 2007?
Click to expand...
Click to collapse
thats when I just registered.. I will be the active member now as I officially own the android phone.
I really appreciate all of you guys work and I didn't mean to offend any one by posting the thread here.
I already apologize for missing the rule for the 10 minimum posts on forum before posting.

I rooted my device successfully by using odin. Thanks all of you for the suggestions.

[Q] One Click Unbrick questions

I have done the unfortunate thing and bricked my phone, now I did see a post in here on this subject but I am not able to open this program/app on either Ubuntu or Windows 7 PC's.
Now my questions...
Is this the only way to unbrick my phone?
Using Linux or Windows, which one works better?
I am using the Rogers one i896, the screen just stays at i896. I will explain what I was trying to do, I had installed Clockworkmod on my rooted phone on the intentions to install another ROM on my phone. I boycotted this idea as I saw another way that had me download the zip, enable debugging, turnoff and place into recovery mode...that is where I got stuck. I obviously made a mistake somewhere, does anyone have any ideas how to unbrick my phone. Not too make it sound worse but I have to use my wife's old Blackberry...a pink flip!

Linux works better. After dl, right click, permissions, check the little box that says make it executable. Click ok. Now right click on it, open with java (either open jdk, or sun java ). The app should open.

Thanks very much, I was now able to install on Linux but after all this the unbrick did not work. It tells me to plug my phone in, the phone is in the USB port it has always been in. I turned the phone in the off position and all it does is show a load symbol similar to the one before the battery charge comes on, when it goes on it just stops at the i896 screen and does nothing else. Any other ideas on how to unbrick this phone? or am I done and got to get a new one? I'd rather keep this one

Ok not to say nothing is working, but I have a yellow triangle with Android digging, says downloading below and at the bottom do not turn off target!!! What does this mean?

coltiger said:
Ok not to say nothing is working, but I have a yellow triangle with Android digging, says downloading below and at the bottom do not turn off target!!! What does this mean?
Click to expand...
Click to collapse
Plug it into the computer and hit the button.

I tried that but my pc doesnt pickup my Samsung anymore, it is like it doesnt exist when I plug in. I am gonna reboot the PC and retry.

Are you using a Linux machine?

yes I am I have Ubuntu 11.10 installed, I never had this trouble before with it recognizing the phone.

If you can get download mode, flash back to stock.

It goes into download mode but not sure how to flash to stock

There is a sticky in the development section for stock ROM.

http://forum.xda-developers.com/showthread.php?t=1285616

Thanks guys, I have read the instructions and all is fine except that I am using Rogers version i896, if it doesn't make any difference then I will load the AT&T if there would be issues. Second issue I am running into is while my phone goes into download mode, my PC's continue to not see my phone, I have removed everything including the SD card. Any ideas how to get the phone to be recognized as I think this would solve a lot

My friend recently had similar problems and it turned out to be a bad cable. Don't overlook the obvious.
/e
Sent from my SGH-I897 using xda premium

HD7 Half brick fix with goldcard

Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.

Google is your best friend.check this link out. http://forum.xda-developers.com/showpost.php?p=10187622&postcount=1

Oh, really? Thanks a lot.
Did you read my question? I already checked that guide, and I don't understand the 4th point.

manuel92 said:
Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.
Click to expand...
Click to collapse
connect all the cables, except the phone (micro USB on the bottom of the phone)
press and hold volume down button with the camera button, then press the power button, the phone should turn on with a grey screen and blue text in the middle that says "Enter USB Host Mode" or something like that..
connect your phone to usb
your screen should look like the photo attached in that thread

Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.

manuel92 said:
Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.
Click to expand...
Click to collapse
hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works

hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works
Click to expand...
Click to collapse
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.

manuel92 said:
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.
Click to expand...
Click to collapse
The ones in the link are your only hope, hmm, try pre-nodo if nodo didn't download, or ask someone to upload the one you want.
oh, if you have a flash memory less than 1gb, it could give you better results.. no harm in try.
idk, sorry, but I think that's all I got :/

hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
Click to expand...
Click to collapse
problem solve card reader change and work

waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
problem solve card reader change and work
Click to expand...
Click to collapse
good to hear

[Q]Possible brick after failed RUU install?

First of all I experimented with some custom ROMs. But after a while I wanted to go back to stock and tried to install a RUU I already used succesfull. But during the installation it hung up and I had to cancel it. And now it is impossible to use everything. The phone just show me the black background with the HTC log and four triangles in the corners. I can't use the bootloader, go into recovery or use adb, first of all because my PC doesn't recognize my phone anymore. Already tried to use adb and some tools like the AIO bye anders and the XL Multi tool. I also tried the Forum search for bricked stuff, but nothing worked so far. Any idea how to fix it?
And please excuse my bad english. It was a long day. ^^

In pretty sure that's completely bring, idk how yous brick the sxl, ivebdonebso much stuff to mine and I wonder how mines still perfect, you might wanna look into some articles about jtag!

Don't know how, as I said. I did also do a lot of stuff to my phone, custom ROMs, Themes, Kernel etc. Now I just tried to go back to stock, relocked, went into fastboot, everything as prescribed.
And during the installation I've got said that the installation was aborted. The progress bar on the phone didn't react and the software stucked too. Additionaly, my PC is really potent, without any other software problems so far. So, Software forced to close and I had no other joice than to put the battery out of my phone to restart it. And so it happened.
Thanks for the info about jtag. As an Electrician, it is really inviting to buy such a machine. But I think, this time I'll bring it to repair and wait for the results. Let to the experts their job. But thanks for the reply.

Mr. Despair said:
Don't know how, as I said. I did also do a lot of stuff to my phone, custom ROMs, Themes, Kernel etc. Now I just tried to go back to stock, relocked, went into fastboot, everything as prescribed.
And during the installation I've got said that the installation was aborted. The progress bar on the phone didn't react and the software stucked too. Additionaly, my PC is really potent, without any other software problems so far. So, Software forced to close and I had no other joice than to put the battery out of my phone to restart it. And so it happened.
Thanks for the info about jtag. As an Electrician, it is really inviting to buy such a machine. But I think, this time I'll bring it to repair and wait for the results. Let to the experts their job. But thanks for the reply.
Click to expand...
Click to collapse
So if you turn on phone all you have is a black screen? What if you pull out battery and insert it and hold down volume down and power button? Does it go to bootloader or also just black screen? If black screen try adb devices and fastboot devices. And when connected look in control panel what it calls the phone. Perhaps it says qsusb or something?
Sent from my HTC Sensation Z710e using XDA Premium HD app

I'm not being rude I'm.just stating sxl is very hard to brick if you even try to, I'm not saying its your fault either, a fault USB cable could brick your phone if your half way through an installation if you can't get into bootloader, recovery or pick up your device in adb, I think the only solution is jtag! All the best!

ricky310711 said:
I'm not being rude I'm.just stating sxl is very hard to brick if you even try to, I'm not saying its your fault either, a fault USB cable could brick your phone if your half way through an installation if you can't get into bootloader, recovery or pick up your device in adb, I think the only solution is jtag! All the best!
Click to expand...
Click to collapse
before jtag , if the phone is under 2 years , always try to send it in for repair they cant boot up the device , then they cant see if it is unlocked

Very true Anders! Just hope he has warrenty!

anders3408 said:
So if you turn on phone all you have is a black screen? What if you pull out battery and insert it and hold down volume down and power button? Does it go to bootloader or also just black screen? If black screen try adb devices and fastboot devices. And when connected look in control panel what it calls the phone. Perhaps it says qsusb or something?
Sent from my HTC Sensation Z710e using XDA Premium HD app
Click to expand...
Click to collapse
When yo flash RUU the phone goes into kind an own bootloader. The black screen with a silver HTC logo. This is the only thing i get into, but with four triangles, in each corner of the display. It doesn't matter what I do, tried to pull the battery, use the key combo, adb/fastboot etc. When the phone starts, it shows directly the screen described above.
Sent in for repair today and just can wait now. But thanks guys for your replies.

How did it go? Did they fix your problem? Also this happened to me, I discovered that the cause was because installing the ruu relocks the bootloader before it wipes the Rom, and mine failed just before wiping the Rom,I had a custom Rom installed so it would not boot into it because the bootloader was locked so I re-unlocked the bootloader then the phone booted up normally!
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium

Phone in USB Host Mode

Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?

lumogox said:
Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
Click to expand...
Click to collapse
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.

Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Click to expand...
Click to collapse
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.

My HTC showed the same message. Saying it can not charge into host mode.
HTC only charges powered off.

ferincr said:
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
Click to expand...
Click to collapse
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.

lumogox said:
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
Click to expand...
Click to collapse
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.

nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.

nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Steps 8-15 of my guide show how to set up adb/fastboot in Ubuntu 32bit and to check if your device is recognized. You don't have to install Ubuntu just select to try it. I think that's what scares everyone off, is thinking they have to install the OS...It seems like a lot of work but it really isn't and compared to what you've gone through, it can't hurt....good luck

lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar

nkk71 said:
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
Click to expand...
Click to collapse
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.

lumogox said:
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
Click to expand...
Click to collapse
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example

I really haven't explored what steps are needed to get it back to stock, but mine connects to the pc as long as it's in bootloader so I can flash stuff like Fw but nothing that need to get into the sd card. (as far as I know).

nkk71 said:
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
Click to expand...
Click to collapse
Well, it's says nothing... doesn't appear anymore on Win 7 devices.

Try cleaning your USB ports?
Sent from my HTC One using Tapatalk

n1234d said:
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I'm thinking this a port issue, is damage somehow, however, I hope to find a software solution.

New Firmware
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.

Loading New Firmware
Also, for some reason, computer would not recognize phone with TWRP recovery yet I could push files through adb when using CWM recovery. So what happened for me was loading up CWM and pushing the files that I needed into the data folder and flashing TWRP to then install it or rebooting the phone as normal and finding the file with something like a root file explorer. I feel like I may not be very clear with this so post if there needs to be more clarification.

it's a strange issue ,i think it is a hardware problem,happen to me and i try everything possible,without success,than i charge phone when power of and it was the only way ,but led was flashing so it was intermittent charging,i was able to charge only to 97%..i use my phone and somehow next day i was able to charge phone,but then problem occur again...and wired thing is that fastboot devices list is not empty but adb devices list is empty,so phone is not fully recognized by computer,and i forgot to say that day when i was able to charge phone,adb command worked...that day i flashed firmware recovery and rom again ,because i thought it will resolve the problem...
---------- Post added at 11:35 PM ---------- Previous post was at 11:23 PM ----------
ricehoshi said:
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Click to expand...
Click to collapse
And do have same problem again after flashing new firmware?

The phone was a gift for my dad and it has been running fine since my last post. No charging issues and the phone does not go into host mode randomly anymore.

Well i also had the same problem...but i did factory reset on the phone and flashed it to completly stock ...and since then no problem..
Sent from my HTC One using XDA Free mobile app