Database Develop

Can Somebody with flashing experence PLEASE help

ok i have an hd2 that the touch screen no longer works the lcd displays fine but it just wont respond to any touch. So i want to send it back to htc for repair but i have CM7 on it so i am trying to flash back to stock 6.5 windows i enter the bootloader and it says: PB81120 SS-B3
SPL-2.08.HSPL 8g XE
0x05
CotullaHSPL 0x50
And i put the stock on the micro sd and renamed it leoimg.NBH and it never tries to scan it just goes straight to serial and goes to usb when i plug in the usb but i cant make it look for the sd card i don't know what to do. can anybody help PLEASE

no need for sd card (16gb card doesnt work anyway)
phone into bootloader
connect usb
when serial says usb
run hspl3
choose 2.08.0000
when complete, back into bootloader
serial -> usb
run the stock .exe

Thank you VERY much worked like a charm!

im pretty new with the hd2 where i can find the stock rom for tmobile usa thanks in advance

Haha go back to the T-Mobile forum it is 2 post down from this one.
Sent from my SAMSUNG-SGH-I897 using XDA App

samsamuel said:
no need for sd card (16gb card doesnt work anyway)
Click to expand...
Click to collapse
Just an info to share Bro...
I never fails flashing via Micro SD 16GB
Am I lucky? I dont know, but I use Sanddisk. (I never try other brand with that capacity.
Cheers

silverwind said:
....Am I lucky?....
Click to expand...
Click to collapse
Definitely, you are! It should not work.

Ummmm.... works on mine too..........

sorry i should have been clearer
'' the 16gb card that ships with tmous hd2's doesn't usually work for flashing.''
(yea yea there are now gonna be half a dozen tmous users all saying they can, hehe)
((oh and i mean for stock rom flashing, of course, not android..))

[Q] Dell streak 7 frozen on dell logo (no rainbow)

PLEASE HELP ....!
i just bought dell streak 7 and after i downloaded the honycomp and press to update . it asked me that it might require to restart and take like 10 min..
but after restartin its frozen on dell logo .. i have searched alot and did pressed the button beside the sd card and did the V+ with power and nuthing happens so please help >>> if it require to be fully charge to restore in recovery mood and please note its still the defult dell logo not with rainbow or anything as i did read in many fourms .. Please help i bought it for my dad's birthday and aint know what to do ... Please ASAP .. thanks

First, open the side port, and use a paper clip and punch that little hole, it will do a hard reset.
You need at least a 60% charge for recovery mode, and always do updates while connected to the external power cable.
Do a reflash of the upgrade, and do a factory reset and let us know how it went.

giveen said:
First, open the side port, and use a paper clip and punch that little hole, it will do a hard reset.
You need at least a 60% charge for recovery mode, and always do updates while connected to the external power cable.
Do a reflash of the upgrade, and do a factory reset and let us know how it went.
Click to expand...
Click to collapse
i hard reset it by the paper clip and plug it to the charger so.. how long it take to be in fully charge??!!\Thanks

3-5 hours.

giveen said:
3-5 hours.
Click to expand...
Click to collapse
i did fully charge it ... pressed the v+ and power and just startin up with dell logo and no menu ... what to do please Help!!!:crying:

There really isn't a need to PM and post here, pick one
Like I said in the PM, Press and HOLD volume+ and power.

giveen said:
There really isn't a need to PM and post here, pick one
Like I said in the PM, Press and HOLD volume+ and power.
Click to expand...
Click to collapse
Really sorry but u know its hard to have such an issue i have to give it to my dad tomorrow.
I pressed and hold for like more than 1 min in v+ and power and nuthing comin up just the dell logo and nuthing more >> what to do ?
a friend told me its might caused because i installed the wrong software edition like not for this model >> so what to do?

Use the nvflash pack back to stock Android 2.2

giveen said:
Use the nvflash pack back to stock Android 2.2
Click to expand...
Click to collapse
Thank you ...... but how please tell me how cause am zero head in andriod.....
please send me how ? thank you in advance.:angel:

Search.
I apologize but I am tired of writing how.

Spiedy said:
Thank you ...... but how please tell me how cause am zero head in andriod.....
please send me how ? thank you in advance.:angel:
Click to expand...
Click to collapse
Watch giveen's videos here: http://www.youtube.com/watch?v=ydM7qkoCs00&list=PLB99FAE280F618B12&index=1&feature=plpp_video to learn how to NVflash, download this file http://d-h.st/iXc, unrar and run the restore.bat file.

The link you provided to the "restore to 2.2.rar"....are these files for the WiFi US model or the T-Mob version ?

wptski said:
Watch giveen's videos here: http://www.youtube.com/watch?v=ydM7qkoCs00&list=PLB99FAE280F618B12&index=1&feature=plpp_video to learn how to NVflash, download this file http://d-h.st/iXc, unrar and run the restore.bat file.
Click to expand...
Click to collapse
Hi thanks for the guide n Links, i have a Dell streak 7 4g T mobile USA n its stuck on T Mobile Boot loop, i have tried master resetting it a few time, hoping it might work but no success, i have searched google n also Xda alot but all links available r of Streakdroid.com which dont work at all, Now u hav provided this "restore to 2.2.rar" are these files for Dell streak 7 4g T mobile Locked version, if not plz help me finding files for this T mobile 4G US version cos it been a week im trying to find these files...

jseivers said:
The link you provided to the "restore to 2.2.rar"....are these files for the WiFi US model or the T-Mob version ?
Click to expand...
Click to collapse
Yes, the base version for all.
---------- Post added at 09:26 AM ---------- Previous post was at 09:22 AM ----------
princepavs said:
Hi thanks for the guide n Links, i have a Dell streak 7 4g T mobile USA n its stuck on T Mobile Boot loop, i have tried master resetting it a few time, hoping it might work but no success, i have searched google n also Xda alot but all links available r of Streakdroid.com which dont work at all, Now u hav provided this "restore to 2.2.rar" are these files for Dell streak 7 4g T mobile Locked version, if not plz help me finding files for this T mobile 4G US version cos it been a week im trying to find these files...
Click to expand...
Click to collapse
As far as I know, it's the only restore file around. Can't comment if/what you'll lose.

Pretty sure this is US wifi only and it wipes everything.

wptski said:
Yes, the base version for all.
---------- Post added at 09:26 AM ---------- Previous post was at 09:22 AM ----------
As far as I know, it's the only restore file around. Can't comment if/what you'll lose.
Click to expand...
Click to collapse
well i have tried Nv Flashing it with this restore to 2.2 file, also added a 22.img to it n flash it n few subtractions of .img files too, wot ever i could find here on xda so far but my Dell streak7 4G Tmobile USA Locked version on froyo 2.2 is stuck on tmobile boot loop & i also tried flashing via SD card by update.pkg files frm XDA & this file it loads 90% & give a Modem Error.. check image below..
i need ur help... dnt know wot to do next.. plz guide me wot to do next to bring it back to life thanks in advance

If the 2.2 file don't work, nothing will! You might be stuck in the "read only" mode. Some have returned their S7 to Dell for repair but at least one person has gotten out of that mode. Not sure if there is a thread on that subject or one got OT. Do a search on "read only".

I've been doing some research into the read only mode. Want try something but need one that is having the problem
Sent from my Nexus 7 using Tapatalk 2

Upgrade from custom ICS to official

I would like to upgrade my 2X from Nova HD Rebuild v1.1.0 to Official V30A.
Problem is that I can not install drivers for PC because my custom ROM does not support PC connection,
Then I tried to downgrade it to stock rom, but I forgot to do backup in CWM when I moved from to stock to custom ROM. Thats way I have nothing to come back to. Now I am stucked without any ideas.
Can you please give me some advice?
Thanks

Admins!! I am bit surprised about this post. How come a new member with only 4 posts can open a new (looking for customer care kind of) thread in DEVELOPMENT section?
Asking coz I think this facility was not available since many years.
Dude! This post should be in General Section. Generally Devs dont answer such things in this area. :silly:

download B2C from lg site and install drivers
put youre phone into sw mode
download smartflash
wait for drivers
flash this: http://file.qip.ru/get/EpX_YlZ5/BIN_...EUR-XXX-N.html
and you have youre ics

thanks mivv, I have already tried that. But when I connect my phone to PC, those drivers can not be recognized because my custom ROM does not allowed it

GOLUB said:
thanks mivv, I have already tried that. But when I connect my phone to PC, those drivers can not be recognized because my custom ROM does not allowed it
Click to expand...
Click to collapse
does ur compurter recognize it in APX mode?vol up + vol down
try an nvflash version from modaco or homero

cmahendra, as you can see from above I am a member for 5.5 years..... that is something like 5 years more then you.
I am posting here because there are a lot of members and guest which have same issues as me.
So, if you don`t want to help, please leave the topic

GOLUB said:
thanks mivv, I have already tried that. But when I connect my phone to PC, those drivers can not be recognized because my custom ROM does not allowed it
Click to expand...
Click to collapse
1.put youre phone into sw mode (Remove batteri Hold in volume up & down , when putting in usb cable.)
2.Install drivers
3.flash the file miw link to in smartflash.
how easy are´nt that?

dafoxen, I tried removing the battery and Holding downvolume up & down , when booting, but in that case phone wont start.
It only boots when volume down is pressed and then it goes to sw upgrading mode. After connecting to PC nothing happens, no driver installing, no nothing.
I also tried with dubuging mode on and off before booting but its the same

GOLUB said:
dafoxen, I tried removing the battery and Holding downvolume up & down , when booting, but in that case phone wont start.
It only boots when volume down is pressed and then it goes to sw upgrading mode. After connecting to PC nothing happens, no driver installing, no nothing.
I also tried with dubuging mode on and off before booting but its the same
Click to expand...
Click to collapse
Try another usb port and a new usb cable.
download this and install
http://dl.dropbox.com/u/28586464/smartflashdriver.zip

cmahendra is right, the post doesn't belong in the Dev section, if the mods see it I am sure they will move it.
If you HAD to post in the Dev section then maybe you could have posted in the Nova thread?
But.. why don't you just put another rom on your SD card (surely you can take out your SD card and connect it to your PC? Buy an adapter if you need to they cost pennies) and flash it from CWM? Then you can connect to your PC.

Right now I`m searching for stock rom in zip format to try it load with cwm

GOLUB said:
cmahendra, as you can see from above I am a member for 5.5 years..... that is something like 5 years more then you.
I am posting here because there are a lot of members and guest which have same issues as me.
So, if you don`t want to help, please leave the topic
Click to expand...
Click to collapse
You are so proud that you are member of XDA for 5.5 years but don't know the rules about creating topic in development section. You should be ashamed.
Sent from my LG-P990 using xda app-developers app

mivv said:
does ur compurter recognize it in APX mode?vol up + vol down
try an nvflash version from modaco or homero
Click to expand...
Click to collapse
I have almost exact same problem, but mine has been already update to ICS using smathflash. But for some reason I cannot install Homero's rooted V30a, becuase apparently the opti tool keep saying: USB device not found. I already try LG drivers, switching USB ports, restarting computer, poor device by now I'm sure it feels that has been raped after so many plug in's and off's.
How do I do and how do I know that the computer recognize it in APX mode?

GOLUB said:
Right now I`m searching for stock rom in zip format to try it load with cwm
Click to expand...
Click to collapse
Right now, there is no such thing...

GOLUB said:
cmahendra, as you can see from above I am a member for 5.5 years..... that is something like 5 years more then you.
I am posting here because there are a lot of members and guest which have same issues as me.
So, if you don`t want to help, please leave the topic
Click to expand...
Click to collapse
Exactly, you've been here for over 5 years, you should know that questions go in Q&A. And don't try to blame this on cmahendra, he's kinda right. The development section is for Roms, kernels etc. Not questions.

I am not blaming anyone. Everyone has its own opinion and that is great, it only makes this community better.
But still I cant solve my problem
hectormcesar is having one also.
Come on people, we count on you :good:

He probably got the point, I'm a wise guy, we all are, anyway time, to update officially downgrade at least the baseband which is what LG check, I've done it with gb, but ics from topo was denied probably because bb was 28g.......
Sent from the new smoothly LGP990

I'm having the same issue as you, it seems. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1981359
You might find an answer there, it gave me some life signs:
I flashed this:
http://forum.xda-developers.com/show....php?t=1617458
To get some sort of life signs, I switched to CP UART, because switching to AP UART didn't change anything. Anyway, I hear the sound that plays when you plug a device in a couple of times, but it shows as an unknown device in the device manager. I also get a little icon in the system tray that says "an unknown device has been plugged in". A couple of seconds later, it disappears, the "disconnect" sound plays and the "unknown device" is no longer shown in the device manager...
Click to expand...
Click to collapse
The download link in post #1 is dead, but there's a mirror on page 6.

Question threads do not belong in Development, you only post threads in there when you've got developments to share. Moved to Q&A where all question threads should be posted.
Please be civil to each other please as you should be helping not criticising each other. Also reason Golub can post in Development is because he's been a member since before the 10 post rule was ever implemented.
Thanks
AvRS

realy
are you sure that usb is enabled , and Debogage USB is enabled ......

Odin won't recognize my device.

My Galaxy s5 att has been buggy lately running dynamic cat 3.0. I want to go back to stock. I downloaded the stock rom and Odin and tried to plug my phone in (on download mode) and it would not recognize it, my computer doesn't either. I tried to install the drivers but I got a message saying they weren't installed correctly. I tried a few times, restarting my computer and nothing will work. Please help.

jeffcojake said:
My Galaxy s5 att has been buggy lately running dynamic cat 3.0. I want to go back to stock. I downloaded the stock rom and Odin and tried to plug my phone in (on download mode) and it would not recognize it, my computer doesn't either. I tried to install the drivers but I got a message saying they weren't installed correctly. I tried a few times, restarting my computer and nothing will work. Please help.
Click to expand...
Click to collapse
Try different PC, data cable or usb port. Delete drivers restart PC then connect phone with out installing drivers back. Install KIES 3.. This is all I can think of for now. Let us know.
Clicking from notecable N910A

norbarb said:
Try different PC, data cable or usb port. Delete drivers restart PC then connect phone with out installing drivers back. Install KIES 3.. This is all I can think of for now. Let us know.
Clicking from notecable N910A
Click to expand...
Click to collapse
I installed kies. It didn't find my device either. I will try a different data cable and get back to you, thanks

norbarb said:
Try different PC, data cable or usb port. Delete drivers restart PC then connect phone with out installing drivers back. Install KIES 3.. This is all I can think of for now. Let us know.
Clicking from notecable N910A
Click to expand...
Click to collapse
So I tried a different cable and same thing. Computer won't recognize the device. It does charge though so I guess that's good. My computer is saying there is an error with my device. I have an idea, if I go to recovery mode and wipe everything and then try to plug it in, will it recognize my device? I'll make sure to make a backup before I do that

jeffcojake said:
So I tried a different cable and same thing. Computer won't recognize the device. It does charge though so I guess that's good. My computer is saying there is an error with my device. I have an idea, if I go to recovery mode and wipe everything and then try to plug it in, will it recognize my device? I'll make sure to make a backup before I do that
Click to expand...
Click to collapse
Do you have access to different computer, any PC , just trying to find out if there is nothing wrong with phone. Seems to me like PC or cable problem but i want to be sure. I had similar problem with note 10.1. I change 4 cables then finally got one working. If all file you can try to wipe just make sure you will have working rom in case if that is hardware or usb port in your phone not working. Also you can try flash rom true Mobile Odin.

norbarb said:
Do you have access to different computer, any PC , just trying to find out if there is nothing wrong with phone. Seems to me like PC or cable problem but i want to be sure. I had similar problem with note 10.1. I change 4 cables then finally got one working. If all file you can try to wipe just make sure you will have working rom in case if that is hardware or usb port in your phone not working. Also you can try flash rom true Mobile Odin.
Click to expand...
Click to collapse
I looked at that app and it says do not use for Android 4.4 and up. They are working on it. I will try a different computer as soon as it's available.

jeffcojake said:
Oh wow I didn't know there was a mobile Odin. So can the app completely wipe my phone and install stock rom without a computer?
Click to expand...
Click to collapse
I can't answer this question because i personally never done this but people claimed they done this. Just search more in XDA forum if this can be done on At&t S5. I know for fact people done this on at&t S3 back in days, but S5 have lock bootloader and i don't know if this will affect this any way.. That was just suggestion if you willing to try, like i said i don't know if this will work.
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
jeffcojake said:
I looked at that app and it says do not use for Android 4.4 and up. They are working on it. I will try a different computer as soon as it's available.
Click to expand...
Click to collapse
See you got your answer... .. Look for another PC. This is safer way.

norbarb said:
I can't answer this question because i personally never done this but people claimed they done this. Just search more in XDA forum if this can be done on At&t S5. I know for fact people done this on at&t S3 back in days, but S5 have lock bootloader and i don't know if this will affect this any way.. That was just suggestion if you willing to try, like i said i don't know if this will work.
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
See you got your answer... .. Look for another PC. This is safer way.
Click to expand...
Click to collapse
There are tutorials all over saying you can and how to do it. I'm just having problems with getting the computer to recognize my phone. I will try it with another computer to see if my wire is bad like you said

norbarb said:
I can't answer this question because i personally never done this but people claimed they done this. Just search more in XDA forum if this can be done on At&t S5. I know for fact people done this on at&t S3 back in days, but S5 have lock bootloader and i don't know if this will affect this any way.. That was just suggestion if you willing to try, like i said i don't know if this will work.
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
See you got your answer... .. Look for another PC. This is safer way.
Click to expand...
Click to collapse
It's definitely not the pc. This other pc is also not recognizing it even after drivers are installed. It says the device has malfunctioned. So I'm guessing it's something wrong with my phone. I would bring it back to AT&T but I have to get it back to stock before that so I can keep my warranty.

[Q] Help Me Fix a Hard Brick! [SOLVED]

I have no clue what the hell happened. The Note 4 locked up earlier today and refused to reboot at first. Eventually it did come back on. I came home and unplugged it then the screen went black. I figure I bumped the power button getting it, well, apparently not.
I've tried pulling the battery and every button combination. It doesn't do ****. I plugged it in to the PC and found that it shows "QHSUSB__BULK". Did some hunting and apparently that means it isn't totally dead. I found some info here talking about recovering from a brick on the Note 3. Problem is I don't have an unbrick image.
So.... uhh basically what do I do now?
I need a unbrick.img from COD6 so if someone could please help with that. According to the Note 3 thread:
Just run this Unbrick Image Creator in recovery & it'll create "/sdcard/Unbrick_Files" in your internal SD card.
Click to expand...
Click to collapse
That is for the Note 3 so I have no idea if it will make a proper image for the Note 4.
EDIT: According to shabbypenguin that ought to give the proper unbrick image. So can someone here running the COD6 bootloader please run that and upload the file for me?
So for future reference, anyone that may need this can try. I take no credit for this. Most of this is a copy/paste from the Note 3 thread.
What do you need?
DO NOT TRY THIS ON ANOTHER NOTE 4 MODEL WITHOUT THE PROPER UNBRICK IMAGE!
- Hard Bricked Device: T-Mobile Samsung Galaxy Note 4 (N910T)
- Micro SD Card: 4/8/16/32 GB micro SD card
- Unbrick Image: working dump with the same bootloader/version
- Image Writer: native commands on Linux/MacOSx or Win32 Disk Imager on Windows
How to recover?
1- Download Unbrick Image for the COD6 bootloader from here or here
2- If you're using Windows, download Win32 Disk Imager
3- Backup all files on the micro SD card you're using
4- Write the Unbrick Image to your micro SD card using Win32 Disk Imager or Linux/MacOSX commands
5- Remove battery, Insert micro SD card & then the battery
6- Hold Power + Home + Volume Down to enter Download Mode by bootloader on SD card
7- Flash Stock firmware via Odin
YOU MAY NEED TO TEST MICRO SD CARDS WITH DIFFERENT TYPES/SIZES & FORMAT AS EXFAT BEFORE WRITING AN UNBRICK IMAGE ACCORDING TO YOUR BOOTLOADER!

I'd charge it for a while. Take out the battery now and then and try to get into download mode.

DarkStarr said:
I have no clue what the hell happened. The Note 4 locked up earlier today and refused to reboot at first. Eventually it did come back on. I came home and unplugged it then the screen went black. I figure I bumped the power button getting it, well, apparently not.
I've tried pulling the battery and every button combination. It doesn't do ****. I plugged it in to the PC and found that it shows "QHSUSB__BULK". Did some hunting and apparently that means it isn't totally dead. I found some info here talking about recovering from a brick on the Note 3. Problem is I don't have an unbrick image.
So.... uhh basically what do I do now?
I need a unbrick.img from COD6 so if someone could please help with that. According to the Note 3 thread:
That is for the Note 3 so I have no idea if it will make a proper image for the Note 4.
EDIT: According to shabbypenguin that ought to give the proper unbrick image. So can someone here running the COD6 bootloader please run that and upload the file for me?
Click to expand...
Click to collapse
To be honest that has yet to work for anyone. Call up and replace the phone.

10-K said:
I'd charge it for a while. Take out the battery now and then and try to get into download mode.
Click to expand...
Click to collapse
The battery was at 100% it isn't that. It is quite obviously a hard brick. It won't do anything besides show a black screen, no response at all.
BACARDILIMON said:
To be honest that has yet to work for anyone. Call up and replace the phone.
Click to expand...
Click to collapse
Obviously it hasn't helped anyone with a Note 4, we don't have an unbrick image. Now if you're trying to say it hasn't helped anyone, including those with other devices, you're full of crap. This method has unbricked numerous devices that actually have an unbrick image.
If you were not going to help by simply running the file and uploading the results then don't bother responding.

DarkStarr said:
The battery was at 100% it isn't that. It is quite obviously a hard brick. It won't do anything besides show a black screen, no response at all.
Obviously it hasn't helped anyone with a Note 4, we don't have an unbrick image. Now if you're trying to say it hasn't helped anyone, including those with other devices, you're full of crap. This method has unbricked numerous devices that actually have an unbrick image.
If you were not going to help by simply running the file and uploading the results then don't bother responding.
Click to expand...
Click to collapse
Are you not in the note 4 thread.. Why would I give a crap about another device. So again does not exist.

I just ran it for you but have no idea if it will work.
Unzip it to use.
Note4_910T_Unbrick_IMG.zip
Link Removed

I'm curious to know if this works just in case i ever hard brick my note 4. Please update us on if it worked or not OP.

DarkStarr said:
I have no clue what the hell happened. The Note 4 locked up earlier today and refused to reboot at first. Eventually it did come back on. I came home and unplugged it then the screen went black. I figure I bumped the power button getting it, well, apparently not.
I've tried pulling the battery and every button combination. It doesn't do ****. I plugged it in to the PC and found that it shows "QHSUSB__BULK". Did some hunting and apparently that means it isn't totally dead. I found some info here talking about recovering from a brick on the Note 3. Problem is I don't have an unbrick image.
So.... uhh basically what do I do now?
I need a unbrick.img from COD6 so if someone could please help with that. According to the Note 3 thread:
That is for the Note 3 so I have no idea if it will make a proper image for the Note 4.
EDIT: According to shabbypenguin that ought to give the proper unbrick image. So can someone here running the COD6 bootloader please run that and upload the file for me?
Click to expand...
Click to collapse
I think everyone has missed asking the most important question.....
What Rom were you running when this happened?

I don't think you have a hard brick.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
Hardware failure maybe.

chipworkz said:
I just ran it for you but have no idea if it will work.
Unzip it to use.
Note4_910T_Unbrick_IMG.zip
https://www.androidfilehost.com/?fid=24052804347758591
Click to expand...
Click to collapse
First, thanks for taking the time to run it and upload it. Unfortunately thanks to your unbrick image along with another guys I have determined that either:
A. The phone hates like all of my SD cards
B. Something else is wrong with the device than even just a hard brick.
XBlackChaosX said:
I'm curious to know if this works just in case i ever hard brick my note 4. Please update us on if it worked or not OP.
Click to expand...
Click to collapse
Unfortunately it didn't boot. I think something further is wrong with the device, ie hardware. I do know when plugged in it was showing the "QHSUSB__BULK" when plugged in. When the SD was installed and I attempted to go to DL mode it disappeared so it was trying to do SOMETHING. Again I think it is hardware.
Jammol said:
I think everyone has missed asking the most important question.....
What Rom were you running when this happened?
Click to expand...
Click to collapse
I was running CM12. Whatever the latest nightly was, IIRC 6/10. It was either that or 6/6. I was also running the Xposed for 5.1 6/9 version that fixed it with CM versions after ~ 6/3.
Android_Monsters said:
I don't think you have a hard brick.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
Hardware failure maybe.
Click to expand...
Click to collapse
I think it was. Even with the unbrick image it wouldn't boot. It did try to do something but I think because of some hardware failure it wouldn't even boot that.

DarkStarr said:
First, thanks for taking the time to run it and upload it. Unfortunately thanks to your unbrick image along with another guys I have determined that either:
A. The phone hates like all of my SD cards
B. Something else is wrong with the device than even just a hard brick.
Unfortunately it didn't boot. I think something further is wrong with the device, ie hardware. I do know when plugged in it was showing the "QHSUSB__BULK" when plugged in. When the SD was installed and I attempted to go to DL mode it disappeared so it was trying to do SOMETHING. Again I think it is hardware.
I was running CM12. Whatever the latest nightly was, IIRC 6/10. It was either that or 6/6. I was also running the Xposed for 5.1 6/9 version that fixed it with CM versions after ~ 6/3.
I think it was. Even with the unbrick image it wouldn't boot. It did try to do something but I think because of some hardware failure it wouldn't even boot that.
Click to expand...
Click to collapse
I definitely suggest just flashing the stock Rom in Odin and then calling in to get a replacement.

Good ole cm12 strikes again.
Pp.

Thats what happens when you venture away from TW to long on a Samsung device! [emoji38] [emoji38] [emoji38]