Related
Would anybody like to try to make a stock Gingerbread theme for AXURA? It looks like the only gingerbread theme thread is for perception only. I'm disappointed that I haven't seen even discussion of making a ginger theme for AXURA.
So would anybody be up for it?
+1
Sent from my SAMSUNG-SGH-I897 using XDA App
The gingerbread theme is for any JK3 based rom which i believe is what AXURA is also based off of, just like perception. It should work just fine
Auxura is jk2 and uses jk3 modem
Sent from my SAMSUNG-SGH-I897 using XDA App
WOuld love it.
Im trying to make the one posted as a metamorph... still have some tweaks to make though. Lol
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Im trying to make the one posted as a metamorph... still have some tweaks to make though. Lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sweet. Can't wait.
+1
Sent from my SAMSUNG-SGH-I897 using XDA App
Bump
Any updates?
This works with Axura, apply with CWM.
http://dl.dropbox.com/u/4610937/DJAxeWater1.1.zip
I do caution you backup the folder/file names to follow if you don't want the toggle buttons, custom boot anim and font included:
The folders to backup and restore if need be
/system/media
/system/fonts
/system/framework/twframework-res.apk
Edit: If need be I'll port the theme later today if possible to avoid people having to use the addon pack.
http://dl.dropbox.com/u/4610937/Gingerbread_Theme_AXURA_1.1.3.zip
Enjoy! Personally the DJAxeWater is a better suited companion for flashing, just uninstall your Swype and delete /system/lib/libSwypeCore.so .
I tried flashing your 1.1.3. Nothing happened. Flashed over 2.1.
I tried flashing over rc1 and it got stuck in boot.
I'm truly sorry about that, I've corrected the framework and it should work now. Use the same link I provided before.
uhh...?
yea i dont know what your posting but it doesnt work.....doesnt do anything
Having issues with the framework....still trying but it doesnt look good..
Sent from my SAMSUNG-SGH-I897 using XDA App
no go for me and now my phone is FCing all over............ :-(
Evilspawn said:
yea i dont know what your posting but it doesnt work.....doesnt do anything
Click to expand...
Click to collapse
Ok ok, will be flashing the new Axura now and test it again. Link dead for now.
Hey, guys, there's a metamorph Gingerbread theme over in the Nexus One forum that works on any HDPI device. Obviously it's not the full framework, but it's good enough to tide you over until you get a full port.
EDIT: Here's the link. http://forum.xda-developers.com/showthread.php?t=863110&highlight=Gingerbread+morph
TheEscapist said:
Hey, guys, there's a metamorph Gingerbread theme over in the Nexus One forum that works on any HDPI device. Obviously it's not the full framework, but it's good enough to tide you over until you get a full port.
EDIT: Here's the link. http://forum.xda-developers.com/showthread.php?t=863110&highlight=Gingerbread+morph
Click to expand...
Click to collapse
Don't think that will work. The naming convention in the Vibrant framework-res and twframework-res has changed which just equals to more work, not sure if an of the online kitchens even work with them. Sorry guys, I wish I could help you guys but right now I don't have the time to renaming all the images for this ROM.
DJNgoma said:
Don't think that will work. The naming convention in the Vibrant framework-res and twframework-res has changed which just equals to more work, not sure if an of the online kitchens even work with them. Sorry guys, I wish I could help you guys but right now I don't have the time to renaming all the images for this
Click to expand...
Click to collapse
Didn't realize it was a vibrant based rom. I can try throwing a framework-res together at some point, if someone wants to upload the stock one.
Thanks to SwiftJudgement and his thread I was able to get this to work for the KB1 release. I will be updating this as I add more of his mods to the files.
Disclaimer: I am not responsible for any damage flashing this mod will cause to your phone. You do this at your own risk.
These are CWM flashable files.
No Clock In Notification Bar
Remove Mods - This will put everything back the way it was. Just in case something goes wrong.
Tritan88 said:
Thanks to SwiftJudgement and his thread I was able to get this to work for the KB1 release. I will be updating this as I add more of his mods to the files.
Disclaimer: I am not responsible for any damage flashing this mod will cause to your phone. You do this at your own risk.
These are CWM flashable files.
No Clock In Notification Bar
Remove Mods - This will put everything back the way it was. Just in case something goes wrong.
Click to expand...
Click to collapse
This broke the modem on my Captivate with Cognition 4.1.1. It boots up with no clock as advertised but I have no service and won't detect the sim card.
CB650 Wolf said:
This broke the modem on my Captivate with Cognition 4.1.1. It boots up with no clock as advertised but I have no service and won't detect the sim card.
Click to expand...
Click to collapse
Again, thanks a lot! It saved me from breaking mine. How do you restore your modem? Just wanted to know so if I ever encounter this problem I can get back on track
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
antonyvijai said:
Again, thanks a lot! It saved me from breaking mine. How do you restore your modem? Just wanted to know so if I ever encounter this problem I can get back on track
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Oops. My bad. I see the revert mod in the post
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
That is strange. I used this on my phone and did not have problems with the modem or service afterwards.
I will try to dig into a little more to see what is going on.
What Modem/Kernal are you using?
Wondering if this will work for me.
I am using AT&T 2.2 Froyo ROM with SuperCurio's KB1+Voodoo Kernel.
Would/Could this work on my phone?
This mod is based off the cognition 4.1.1 release from Design Gears. I have not done anything else with this.
I am running the supercurios KB1 kernal with voodoo and cwm and the stock modem right now. I honestly do not see any way in the code that the modem can be broken with the change I put in.
bobapunk said:
Wondering if this will work for me.
I am using AT&T 2.2 Froyo ROM with SuperCurio's KB1+Voodoo Kernel.
Would/Could this work on my phone?
Click to expand...
Click to collapse
Not sure if this work on the stock rom or not. I have not looked at the stock services.jar yet.
bobapunk said:
Wondering if this will work for me.
I am using AT&T 2.2 Froyo ROM with SuperCurio's KB1+Voodoo Kernel.
Would/Could this work on my phone?
Click to expand...
Click to collapse
If you try it, please post if it works or not!
Tritan88 said:
This mod is based off the cognition 4.1.1 release from Design Gears. I have not done anything else with this.
I am running the supercurios KB1 kernal with voodoo and cwm and the stock modem right now. I honestly do not see any way in the code that the modem can be broken with the change I put in.
Not sure if this work on the stock rom or not. I have not looked at the stock services.jar yet.
Click to expand...
Click to collapse
Maybe it was a bad download. I'll redownload it and see what happens.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Ok. I flashed this again.
Really long initial boot and tons of force closes but no message popped up to tell me what exactly it was. After the media scanner stopped and I went into the task manager and cleared the ram it stopped vibrating over and over again. I'll try a reboot and see what happens.
*EDIT still no good. I'm still getting force closes when using data network but not over wifi.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
That does not make any sense. upload your original services.jar file and I will compare it to the one i posted for download. Something has to be different.
CB650 Wolf said:
Ok. I flashed this again.
Really long initial boot and tons of force closes but no message popped up to tell me what exactly it was. After the media scanner stopped and I went into the task manager and cleared the ram it stopped vibrating over and over again. I'll try a reboot and see what happens.
*EDIT still no good. I'm still getting force closes when using data network but not over wifi.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Tritan88 said:
That does not make any sense. upload your original services.jar file and I will compare it to the one i posted for download. Something has to be different.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Here it is
I found the issue with your file. Here is the new file.
http://www.mediafire.com/file/a9n2r8xqwrjb8wd/KB1_Remove_Clock_Fixed.zip
It appears that something is different between my install of the rom and the stock install. Not sure how that happened but it did.
I will update the op with this link also.
bobapunk said:
Wondering if this will work for me.
I am using AT&T 2.2 Froyo ROM with SuperCurio's KB1+Voodoo Kernel.
Would/Could this work on my phone?
Click to expand...
Click to collapse
Unless you have deodexed your rom it will not work. I also just found out that the services.jar file can change. The first file I posted was from my install and it did not work for CB650 Wolf but it worked fine for me. I just took the stock file from the cognition 4.1.1 download and applied the change to that one for the upload.
Thanks CB650 Wolf for help with this. Sorry it caused so many problems.
Sweet
Sent from my Captivate using XDA Premium
Tritan88 said:
Thanks CB650 Wolf for help with this. Sorry it caused so many problems.
Click to expand...
Click to collapse
No problem. Thats why this is such a great community; we are all willing to test eachother's releases and not complain too much about bugs.
New file works great.
Tritan88 said:
This mod is based off the cognition 4.1.1 release from Design Gears. I have not done anything else with this.
I am running the supercurios KB1 kernal with voodoo and cwm and the stock modem right now. I honestly do not see any way in the code that the modem can be broken with the change I put in.
Not sure if this work on the stock rom or not. I have not looked at the stock services.jar yet.
Click to expand...
Click to collapse
I've never heard of these changes breaking the modem. The problems he is describing are new to me as well.
The ROM has to be deodexed. So not it will not work on pure stock KB1.
EDIT: Should have read the second page.
Nice job
Edit: GREAT mod... BUT....i never realizes how much I used that little clock untill it was gone lol. But VERY nice mod
Sent from my SAMSUNG-SGH-I897 using XDA App
SwiftJudgement said:
I've never heard of these changes breaking the modem. The problems he is describing are new to me as well.
The ROM has to be deodexed. So not it will not work on pure stock KB1.
EDIT: Should have read the second page.
Click to expand...
Click to collapse
I actually found out that it was a kernel problem, not a problem with this file. If with the Cog kernel if you reboot while charging you run the chance of your phone not registering the sim card once it al boots up.
ever wanted to flash back to froyo but didnt want to use the almighty odin? well here is a simple solution that should let u install froyo on a gb build without any errors
1.open the 2.2 rom you want to flash on the file explorer on your computer then click into the META-INF folder then com, google, android, and u will see the file updater script, delete that file (if u have problems getting that to delete use a program like winrar)
2.put the updater script u downloaded in replace of the old one (if winrar or any other program made u unzip the file and didnt zip it back up automaticlly make sure its done then place the file back to your phone and flash away
dont forget about the thanks button
http://forum.xda-developers.com/showpost.php?p=16409955&postcount=48
could this be used via root explorer?? With no PC needed at all?
Sent from my SGH-T959 using XDA Premium App
bdubs4200 said:
could this be used via root explorer?? With no PC needed at all?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
if u can get the files in the correct place, give it a try
As long as your not on a cm7 based rom u can just flash the rom....
If anyone tried this an it worked plz let me know have broken USB port an can't risk my phone since its my connection to outside world lmao an will hit thanks button
Sent from my SGH-T959 using XDA Premium App
will this work for cm7/cm7 based rom
krackers said:
will this work for cm7/cm7 based rom
Click to expand...
Click to collapse
Yea that's what he is talking about regual 2.3 roms u can just go back but not cm try it out an let me know
Sent from my SGH-T959 using XDA Premium App
Nice it should be really usefull. I would try it but im not on cm7.
But you should put that on the title and op that it is for cm7 based roms(if it is)
Sent from my SGH-T959 using XDA App
es7241 said:
Nice it should be really usefull. I would try it but im not on cm7.
But you should put that on the title and op that it is for cm7 based roms(if it is)
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
its pretty much based for cm7/miui possibly even jvq/jvr roms havent tried it much on those
Plz
My pc is acting up an i cant edit file so could someone make one for me an upload thanks button will be hit
This is helpful, but you have to know why first. The difference is the difference in the install scripts. In CWM versions before CWM3, we used amend scripting. Amend scripting is no longer supported in CWM3 and above, it now uses edify scripting.
Kernels that contain recovery prior to CWM3, you can flash the old scripts just fine. For example, cmenards latest JVQ based kernel supports both amend and edify scripting, and is based off CWM 2.5.x.x.
Its all in knowing what you are running, and what's compatible.
I wont get too preachy on this, but Odin is your friend, nothing to be scared or wary of, and with regular use to actually set you back to stock, will create a much better running environment for your Vibrant experience. Shortcuts around it will eventually cause all kinds of issues.
Sent from my ZenDroid, meditating on the XDA App
gamikzone said:
if u can get the files in the correct place, give it a try
Click to expand...
Click to collapse
I'm sensing a "go ahead and F#Ck it up see what happens and let me know" sort of vibe....??
Sent from my SGH-T959 using XDA Premium App
I can't get this to work I used astro file to place updater script in the rom an then deleted old one then tried to flash it says installing then it abort what am I doing wrong also tried win rar
Edit:did not work install aborted
Sent from my T959 using XDA Premium App
Wondering
Has this worked for anyone?
The OP missed some key points in this "guide".
If your zip file is using is using the old amend scripting, then there will be one file called update-script (not updater).
The newer scripts, edify scripting, uses two files, update-binary and updater-script, and you need both files if your kernel or recovery method is cwm3 or later, edify scripting only.
Or you could save a dev a future headache, and just use Odin.
Sent from my ZenDroid, meditating on the XDA App
Br1cK'd said:
The OP missed some key points in this "guide".
If your zip file is using is using the old amend scripting, then there will be one file called update-script (not updater).
The newer scripts, edify scripting, uses two files, update-binary and updater-script, and you need both files if your kernel or recovery method is cwm3 or later, edify scripting only.
Or you could save a dev a future headache, and just use Odin.
Sent from my ZenDroid, meditating on the XDA App
Click to expand...
Click to collapse
Well the rom i used has both of those Eugene rom which zip is edify an when i flashed it was doing kernel then it started to flashed words disapperd an came back it an then it rebooted and then it looped on flash part
I'm just going to say, if you can use ODIN, do it.
Jasonhunterx said:
Well the rom i used has both of those Eugene rom which zip is edify an when i flashed it was doing kernel then it started to flashed words disapperd an came back it an then it rebooted and then it looped on flash part
Click to expand...
Click to collapse
You're talking about his last deadhorse kernel. That one, if memory serves me, even has a pre-kernel flash that you did through sgs kernel flasher, then the rom and full kernel. Coming from that one friend, I do believe Odin is your only option.
s15274n said:
I'm just going to say, if you can use ODIN, do it.
Click to expand...
Click to collapse
And if you can't, find a friend with a pc you can use for ten minutes.
Sent from my ZenDroid, meditating on the XDA App
im sorry if this hasnt worked for anyone who wants to downgrade and not use odin, i must of missed that part about updater vs update i will look in to it
Can't Odin broken USB port have warranty but phone is currently off so can't replace an I need battery life
Sent from my SGH-T959 using XDA Premium App
I want to start developing roms for my Droid 3, P.S have had experience with rooting, rom, and the rest. But though I have tested a lot, never actually had an experience building them. I was hoping someone could lead me in the right direction. I saw that for HTC devices they have something special, think it was called Android Kitchen or something. Anything like this for Motorola devices? Specifically the Droid 3?
Uot kitchen? I've tried to use it to make some changes but it always fails to install the zip so I gave up w/ it.
Sent from my DROID3 using XDA App
wootizzle said:
Uot kitchen? I've tried to use it to make some changes but it always fails to install the zip so I gave up w/ it.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Have you tried replacing the update-binary in the uot zip with the one from your stock rom
Sent from my rooted xt860
Anyone else? Has anyone tried replacing the update-binary with the stock rom one, as Endoroid said? Any help is appreciated!
Replacing the updater-script file should work but uot kitchen can only mod framework-res.apk and systemui.apk i would look at a tool that can decompile and recompile like Apk_Manager_5.0.2
Thanks, i look into that later today, but does it work with Droid 3?
Hey peeps,
I would like to know if the lockscreen can be themed.
It's lookin really nasty on a higher display resolution.
I want to try it myself but should I even start? Because I can't install it through cmw recovery. This official Rom doesn't allow cmw. And does anyone know which file I should change. Never done anything with theming before. I already got the images from the framework file.
Added a screenshot to make my story/question more clear.
Sent from my LG-P970 using xda premium
Duumke1 said:
Hey peeps,
I would like to know if the lockscreen can be themed.
It's lookin really nasty on a higher display resolution.
I want to try it myself but should I even start? Because I can't install it through cmw recovery. This official Rom doesn't allow cmw. And does anyone know which file I should change. Never done anything with theming before. I already got the images from the framework file.
Added a screenshot to make my story/question more clear.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
You can still install it by pushing it via adb, or copying the file using a root file explorer. But be careful, cause if you brick your device, you ll have to completely reinstall the ROM, or at least, reflash, reroot and reinstall the rest with Titanium
N00BY0815 said:
You can still install it by pushing it via adb, or copying the file using a root file explorer. But be careful, cause if you brick your device, you ll have to completely reinstall the ROM, or at least, reflash, reroot and reinstall the rest with Titanium
Click to expand...
Click to collapse
Thank you Nooby
Now I need to try and find the right png file(s)
Sent from my LG-P970 using xda premium