Database Develop

Please help me downgrade my SPL 5.10

Dear All,
I want to install the new deepshine rom.. i have read alot of treads and forums and im really confused. i recently switched from a iphone to HD7.. so here goes..
Below are my phone details
Model - HTC HD7 T9292
Software Windows Phone 7.5
OS version - 7.10.7740.16
Radio software version - 5.71.09.02a_22.51.50.21U
Bootloader - 5.10.2250.0(132968)
Im aware that i have to downgrade SPL to avoid bricking it. but how downgrade? i was thinking of downloading this veriosn:Europe 1.16.401.01 HTC HD7 T9292 7.0.7004.0 2250.09.11601.401 5.51.09.06a_22.30.50.09U 1.16.2250.0(110866). and install that to my fone. will it work or do i have to use gold card method?? if i can flash this rom to my phone and if it will work .. how do i flush this old stock rom to my phone.... i know this is the first step in installing custom rom but have to go step by step right
IF any one can help to go through this process ill appreciate it a lot..
THANKS IN ADVANCE

Pleae help
Dear All,
i read that if i even downgrade to pre-nodo this rom Europe 1.16.401.01 HTC HD7 T9292 7.0.7004.0 2250.09.11601.401 5.51.09.06a_22.30.50.09U 1.16.2250.0(110866)) ''the SPL will not downgrade and will remain the same as 5.10 is that true or will it downgrade SPL
THANKS GUYS PLEASE REPLY

HI
YOU SHOULD VISIT THIS
http://forum.xda-developers.com/showthread.php?t=1411904
IN MY CASE I DAMAGED MY BOOT LOADER BUT WITH THE HELP OF GOLD CARD METHOD NOW I AM ON STOCK ROM.

more info
hellskater said:
Dear All,
i read that if i even downgrade to pre-nodo this rom Europe 1.16.401.01 HTC HD7 T9292 7.0.7004.0 2250.09.11601.401 5.51.09.06a_22.30.50.09U 1.16.2250.0(110866)) ''the SPL will not downgrade and will remain the same as 5.10 is that true or will it downgrade SPL
THANKS GUYS PLEASE REPLY
Click to expand...
Click to collapse
before you do anything.... need more info
you have given phone info but NO info of bootloader screen info???
firstly you have to see if your phone is supported !
cheers and have a gr8 day
thanks button is next to qoute button

How do I get into the three color screen ? And how do I get out ?

HC13 said:
How do I get into the three color screen ? And how do I get out ?
Click to expand...
Click to collapse
turn of the phone
when phone off... turn back on using the press power button and vol at same time
cheers and have a gr8 day
thanks button is next to qoute button

Downgrading
http://forum.xda-developers.com/showthread.php?p=18244911
try this its simple and to the point

DONE IT
Thanks for all your posts and help i have successfully followed sh4d0w86 [TUT] How-to: downgrade SPL, flash XSPL, flash Custom ROMs & Radios, and downgraded my bootloader installed RSPL/HSPL and installed deepshining ROM
THANKS

New To HD7 and Windows - Need Help Flashing and Unlocking

Hi i just bought a HTC HD7 16Gb on eBay which is on o2 and thought il use the windows 7 mobile devices since the interface and overall phone is brilliant.
I want to unlock it (not sim unlock) and instal a custom ROM.
I cant remember what version the had when i opened it but im pretty sure it only said "Windows 7". I have now updated the phone and this is what i currently have.
Model HTC HD7 T9292
Software: Windows Phone 7.5
Total Storage :14.63
Available Storage: 13.75 GB
OS Version: 7.10.7720.68
Firmware Revision Number: 2250.21.40501.206
Hardware Revision Number: 0002
Radio Software Version: 5.69.09.29a_22.50.50.21U
Radio Hardware Version: A.102.0.D4
Bootloader Version: 4.5.2250.0(129291)
Chip SOC Version: 2.2.50
Now Sorry i know this question has been asked countless times but after reading for 3 hours i just want 2 make sure i do everything right so i don't want to end up with a brick. If i said any errors could you correct me please.
From what i understand The radio version isn't important but it is the Bootloader version that matters right? Bootloaders with 5.xxx need to be downgraded via a special way otherwise 4.xxx or lower bootloaders are ok however bootloader lower than 3xxx are better to have?.
Do i need to downgrade my OS version before i can even begin flashing?
Once you instal a custom ROM not all custom ROMS support being up datable via Zune without bright right?
So in simple terms can someone advise me the steps to first unlock my phone so i can instal my XAP files, then secondly how would i go about installing a custom ROM.
Thanks You and Sorry for the trouble.

hi Awofadeju
need more info .... phone mid number.... found on bootloader screen
first thing to do is check to see if your phone can be installed with Cotulla HSPL
if not supported dont waste any more of your time
1, yes you have to downgrade your OS to downgrade your hspl
2, ONLY after you have downgraded your Hspl... then install Cotulla HSPL
3, some custom roms are updatable via zune but not recommended
4, sh4d0w86 has the best install instructions HERE
5, read sh4d0w86 instructions and follow his steps....link....http://forum.xda-developers.com/showthread.php?t=1295068
cheers and have a gr8 day
thanks button is next to qoute button

Removing my HTC HD7's OS and reinstall some other custom version

I need to remove my WP7.5 Mango 7.10.8107.79 version..
All the guides who I have read are difficoult and unnecessary.
I tryed to do the downgrate before the Interop Unlock, but always goes wrong.
I'm really disappointed, but I continue to search some methods to unlock this f*****g System!
Anyway I need to install some Custom ROM like Nexgen+ 3.2 or to unlock the mine.
Are some news?
Are some differents methods?
Can you help me?

which bootloader are you on?
it can be found out in the about page in settings

Ok, is this:
PD29100 SS-BC (4K)
SPL-5.11.2250.0 (123578) MNG <---
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)

hey man u need to downgrade your bootloader
your version is 5.1 so u can use "GoldCard method" (in this method u will install an original ROM like 7004 and with this,your bootloader version will change to lowers like 1.23 depends on ROM)
after that u must turn your SPL to RSPL and then u can install a costum rom like PWPD or other ROMs.

http://forum.xda-developers.com/showthread.php?t=1295068
Follow the tutorial here

Ok, thanks guys!
Today I try the method inside the guide, after the finish I'll say my response!

Øne× said:
Ok, thanks guys!
Today I try the method inside the guide, after the finish I'll say my response!
Click to expand...
Click to collapse
Ah, I forgot.. Active Sync and Windows Mobile Device Center don't run on my Windows 7.
I already tried one week ago.

Øne× said:
Ah, I forgot.. Active Sync and Windows Mobile Device Center don't run on my Windows 7.
I already tried one week ago.
Click to expand...
Click to collapse
what? those are supposed to run on any windows 7

Hi, Mine was on 02 and cheapest unlock I could find was about £9 on internet but on ebay I unlocked the phone for £1.19 and I had the code in 2 minutes. Still wouldnt mind getting rid of the 02 branding but cant be bothered downgrading and all that.

Can you help mi with my HTC HD7? (flashing and fixing errors)

Hi! First of all, i'm sorry if you can't understand this post as well as you expect but i'm spanish. However, i'm going to try it without using Google transaltor.
This forum is the best i've found in the web about windows phone scene, and i hope you to help me with my problem
I'm using HTC HD7 with the following system:
-SO = 7.10.8107.79
-2250.21.51101.401
-0002
-5.71.09.02a_22.51.50.21U
-A.102.0.D4
-5.11.2250.0
So, if it is posible, i want to install this SROM --> http://forum.xda-developers.com/showthread.php?t=1271118
I'm confused because my SCL is 5.x and i'm starting from 0 in this Operative System.
When i start my phone holding camera button, it doesn't show my usb information.
Can you help me step by step? if it is more comfortable for you, by private message.
Thank you and sorry for my english.

That link doesn't work to show what rom you want to download. Power off your phone, hold down the volume down key and power your hd7 back on while continuing to hold down the volume button, this will bring you into boatloader mode. Use shadows awesome tutorial to downgrade your spl at or below 3.xxx on this thread http://forum.xda-developers.com/showthread.php?t=1295068
Post any more questions or problems.
If you found this helpful click the thank you button!

hello xdrc45, is SPL and bootloader version the same? im struggling with all of these letters. lol
I already asked this in a different thread. apparently, no one's still around to answer.
here are the details:
OS version: 7.10.8773.98
Firmware revision number: Deepshining v7.6
Hardware revision number: 0002
Radio Software:5.51.09.11a_22.31.50.09U
Radio hardware: A.12.0.D4
Bootloader: 3.1.2250.0(119314)
can I flash a different rom with that? I just got this phone with a custom rom already. I got tired and bored of android so im exploring wp7. please help me.
Thanks!

Yes its pretty much is the same, when in boatloader mode do you have rspl or hspl if you have hspl you can just flash a new rom, if you have rspl then you need to re rspl and then flash a new rom.
If you found this helpful please click the thank you button!

xdrc45 said:
That link doesn't work to show what rom you want to download. Power off your phone, hold down the volume down key and power your hd7 back on while continuing to hold down the volume button, this will bring you into boatloader mode. Use shadows awesome tutorial to downgrade your spl at or below 3.xxx on this thread http://forum.xda-developers.com/showthread.php?t=1295068
Post any more questions or problems.
If you found this helpful click the thank you button!
Click to expand...
Click to collapse
Sorry for invalid link - http://forum.xda-developers.com/showthread.php?t=1271118
i want to install is SROM deepshining v7.6
i'm going to follow that tutorial and i will post how it worked or not
Thank you so much for the answer
i will give you thank button if it works

Im running the Deepshining V7.6 rom on my hd7 and its an excellent rom! If you have any problems or questions just post them and I'll try to help you! Also make sure after you flash the rom to run your HTC connection setup app to fix your phones reception and don't forget to thank dotcompt for his rom and shadow for his tutorial!!

xdrc45 said:
Im running the Deepshining V7.6 rom on my hd7 and its an excellent rom! If you have any problems or questions just post them and I'll try to help you! Also make sure after you flash the rom to run your HTC connection setup app to fix your phones reception and don't forget to thank dotcompt for his rom and shadow for his tutorial!!
Click to expand...
Click to collapse
Thank you for reply!
Now i'm a bit confused. I am in
7.0.7004.0
5.71.09.02A......
SPL -> 1.57.2250.0 (113571)
I tried to install rspl, but i can't do it. i'm trying it with DFT in 1.56 and 1.60, but it doesn't work.
What can i do now? i'm downloading RUU_Schubert_HTC_Europe_1.60.401.01_Radio_5.52... to try changing my spl again.
Is it ok?

Leri4 what's your detailed info in bootloader mode?

ph019725 said:
hello xdrc45, is SPL and bootloader version the same? im struggling with all of these letters. lol
I already asked this in a different thread. apparently, no one's still around to answer.
here are the details:
OS version: 7.10.8773.98
Firmware revision number: Deepshining v7.6
Hardware revision number: 0002
Radio Software:5.51.09.11a_22.31.50.09U
Radio hardware: A.12.0.D4
Bootloader: 3.1.2250.0(119314)
can I flash a different rom with that? I just got this phone with a custom rom already. I got tired and bored of android so im exploring wp7. please help me.
Thanks!
Click to expand...
Click to collapse
you already have bootloader 3.1 so install HSPL and you can flash any rom after that
http://forum.xda-developers.com/showthread.php?t=1295068
install hspl from here

xdrc45 said:
Leri4 what's your detailed info in bootloader mode?
Click to expand...
Click to collapse
PD29100 MFG SS-BC (4K)
SPLE- 1.57.2250.0. (113571)
MICROP (LED) Ox07
SD SANDISK 7500 MB CLASS B
PARTITTION INFO- V211V413
thanks!

Thank you for your help! I just clicked in thank!
I made many errors and i'm going to explain it for those people who have the same problems.
-I originally had HTC HD7 (Schubert) with mango 7.5 installed from zune
-My originally spl was 5.x
1º- I entered in bootloader (useful information for newbies) switching of my phone and switching it on while pressing volume down button.
2º- i downgraded my spl using SLSPL from here -> http://forum.xda-developers.com/showthread.php?t=1411904
3º- once rebooted in spl mode i got SPL 1.57
4º- I installed this RUU http://www.4shared.com/file/kXXbn7HR/RUU_Schubert_HTC_Europe_169401.html
This will give you SPL 1.69 wich is supported in DFT
5º- Use cotulla DFT, now without problems.
6º- install your favourite cROM, i used deepshining v7.6 --> http://forum.xda-developers.com/showthread.php?p=17735530#post17735530

leri4 said:
PD29100 MFG SS-BC (4K)
SPLE- 1.57.2250.0. (113571)
MICROP (LED) Ox07
SD SANDISK 7500 MB CLASS B
PARTITTION INFO- V211V413
thanks!
Click to expand...
Click to collapse
flash another radio rom and change your spl to something in 3.xx then install HSPL

[Q] Canada Bell HD7 flash asian rom help

Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!

quekou said:
Hi Folks. I will be getting a HD7 tomorrow. The HD7 is from Bell network (Canada). I would like to change the display to Chinese. I am completely new at flashing rom stuff. What file do I need and what steps should I take? Also the phone is locked to Bell, how do I get it unlocked? if I flash a Asia rom, is it unlocked automatcially. Thank you!
Click to expand...
Click to collapse
You'll have to SIM unlock the device to get it to work on your network carrier. There are online sites that charge a small fee and will have your device SIM unlocked in a couple hours to a day. Unfortunately flashing a rom won't SIM unlock the device.
When you get the device go to - Setting - About - More - this will give you the devices Bootloader version, Firmware Revision Number, Radio version and other information such as OS version but those are the important ones you'll need.
The last 3 digits of the Firmware Revision # will give you the network carrier that it's locked to for sure. Bell Mobility = .666
Since its Bell carrier you'll need to download a Bell Mobility Pre-NoDo or NoDo rom to downgrade the SPL and use it with the goldcard method to downgrade the SPL.
To flash a rom you'll have to follow these steps -
1. Downgrade the devices SPL to at or below 3.xxx (which is required to install RSPL/HSPL)
2. Install RSPL and HSPL = Flashing XSPL
3. Flash a custom rom of your choice.
Just follow Shadow's tutorial on downgrading SPL, flashing XSPL and installing a custom rom -
http://forum.xda-developers.com/showthread.php?t=1295068

thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .

quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Luckily yes!
You just have to download and install RSPL/HSPL while the device is in bootloader mode.
Read through the DFT XSPL post carefully to avoid damage to the device.
Then download and flash the custom rom of your choice while the device is in bootloader mode
---------- Post added at 08:12 PM ---------- Previous post was at 07:43 PM ----------
quekou said:
thank you very much much for the info. igo the phone today.
i managed to enter the tri color screeen and saw following info.
pd29130
spl-2.16.2250.0 (117476)
......
does it mean that my phone's spl is 2.16 and downgrade is not necessary?
thanks again .
Click to expand...
Click to collapse
Before you start trying to flash the device... Make sure you have ActiveSync install for windows XP or windows mobile device center for Vista/7 on your PC, this allows for the proper drivers to be installed. Then you'll want to plug the device into your PC into and let the drivers install. Once that's done put the device into bootloader mode and connect it to the PC again and it will install the Qualcomm drivers. This will change the white section in bootloader mode from "Serial" to "USB" and now your ready to start flashing!

i downloaded tried to run xspl following the link but the it says my hd7 model ID is not supported. Mine is a bell hd7 ( just unlocked using codes order online) with information as
PD29130
SPL-2.16.2250.0
......
error msg when running xspl:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291300'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
would you be able to shed some lights on what i should do?

well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks

quekou said:
well, another problem emerged. my newly bought htc hd7 keeps rebooting itself . i haven't installed anything or changed anything other than entered the unlock code. why, tks
Click to expand...
Click to collapse
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0

xdrc45 said:
Your device is supported use the Newest version Revision #3 here -
http://htcfanboys.com/download/cotulla/?action=view&file=2942
As far as the rebooting I'm not sure....that can be caused from multiple things. Hopefully after flashing the device it will take care of it.
When in bootloader mode is there any other information displayed on the screen?
Other than
PD29130
SPL 2.16.2250.0
Click to expand...
Click to collapse
thank you so much for the info. i will try it when i get home. the rebooting problem seems to have lessened after sleeping on it for a night. it's strange though. anyway, i will try to flash the rom to see if it elimates the problem.
yes, on the tri color screen, it shows other lines as well which i don't have a club what they are.
i will let you know what's going to happen .tks again.

it still didn't work. phone is recognized but there isn't 2.16 spl so i choose 2.10. it didn't work, then i tried 2.56 , it still didn't work. after the sussful msg, i took out the battery and then restart the phone going into tricolor state, its still spl, not rspl. any ideas, thanks ...

i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,

quekou said:
i just noticed that the tricolor screen has " MNG" in the spl version line. i remember the DFT software says to make sure no MNG is displayed in the message. i guess the DFT method does not work with my HTC HD7. now what i do? thank you,
Click to expand...
Click to collapse
It should still work even with the MNG.
I would try and run RSPL/HSPL again. Sometimes it doesn't work the first time. Run the RSPL wizard and select the 2.10, The device should stay in bootloader mode and say RSPL, if it doesn't change run the wizard again and it should work. Then while it's still in bootloader mode run the HSPL wizard and select the closest version to your RSPL 2.1
Once you install RSPL don't pull the battery or it will reset and go back to OSPL.