Related
Hi, I was wondering if anyone has the original optus milestone sbf file.????
slym84 said:
Hi, I was wondering if anyone has the original optus milestone sbf file.????
Click to expand...
Click to collapse
Hi slym84, you can find the stock 2.1 optus .SBF here:
http://and-developers.com/sbf:milestone
EDIT: It appears the mirror is down, if you can't find a copy by Saturday, I know I have it at work, so I can upload it then.
mystichobo said:
Hi slym84, you can find the stock 2.1 optus .SBF here:
http://and-developers.com/sbf:milestone
EDIT: It appears the mirror is down, if you can't find a copy by Saturday, I know I have it at work, so I can upload it then.
Click to expand...
Click to collapse
Thanks, will wait till saturday..Do you have a problem with the Airplane mode?? Mine restarts when changed from On mode to OFF mode.
Update: Somebody recommended flashing new 2.2.1 leak for the airplane mode bug but it is still there. So, i'd like to have the Optus sbf so that i can take it to the store to solve the problem.
So, the mirror link is still no up. PleSe help me get the sbf. I'mm gettinng more and problems. One vertical area of my MS doesn't response to touch. I recently flashed to O2 official 2.2.
Sent from my Milestone using XDA App
Hi slym84 i've mirrored the sbf for you.
h**p://and-developers.com/sbf:milestone
Thank u so much for helping me.
So, since i'm using O2 2.2 with the updated kernel, is it possible to flash this sbf? will the kernel be downgraded too?
Sent from my Milestone using XDA App
ntroducing the new Android Froyo 2.2.2 software release for the Motorola Atrix. This update is now available and Bell strongly recommend clients to upgrade the software on their device.
Benefits of the Android Froyo 2.2.2 software update [Firmware v37.23] :
Improved device stability and performance.
Faster upload speeds now up to 5.76Mbps.
Improved email setup – for easier automatic email configuration.
Accented character support within Webtop application now available.
Greater touch screen and fingerprint sensitivity.
Addresses charging issues through USB from PC after battery is completely drained.
http://www.motorola.com/Support/CA-EN/sdcards/Atrix
Edit: Link = Fixed.
binary110 said:
ntroducing the new Android Froyo 2.2.2 software release for the Motorola Atrix. This update is now available and Bell strongly recommend clients to upgrade the software on their device.
Benefits of the Android Froyo 2.2.2 software update [Firmware v37.23] :
Improved device stability and performance.
Faster upload speeds now up to 5.76Mbps.
Improved email setup – for easier automatic email configuration.
Accented character support within Webtop application now available.
Greater touch screen and fingerprint sensitivity.
Addresses charging issues through USB from PC after battery is completely drained.
http://www.motorola.com/Support/US-EN/Atrix+Upgrade
Edit: Link was from a bell document, the Source says that its available OTA, as well as manually, but i can't seem to find the manual link working properly.
Sweet
Click to expand...
Click to collapse
Shouldn't this be somewhere else? Not a dev not even link to stock room?
Sent from my MB860 using XDA Premium App
Possibly, but i figured devs could use it.
http://www.motorola.com/Support/CA-EN/sdcards/Atrix
This is the proper link!
can i install this over greyblur?
and this would remove root priv? anyone tried rooting post install??
Not working
Just tried to update my atrix 3 times with no luck. Anyone else have issues updating a rooted, unlocked phone?
Now we need someone to pull the modem only from this.
Sent from my Blue Myst GladiAtrix on Bell using the XDA Premium App.
I've tried the update 3 times as well. No luck. It seems to hang about 20% through the unpacking.
I'm rooted, have the telstra modem and did the webtop via hdmi. Any ideas on how to move to the update?
zoverion said:
Just tried to update my atrix 3 times with no luck. Anyone else have issues updating a rooted, unlocked phone?
Click to expand...
Click to collapse
Ya..I tried this update yesterday OTA and had the same issues (I'm rooted and unlocked with webtop hack)..after about 20% I get the exclamation mark in the triangle telling me its failed. I was hoping to log on this morning and find the sbf ready to upload
I have the french SBF installed and greyblur/root. - I havent tried it, I doubt it will work on the french SBF. I really didn't realize how screwed we bell guys are without a factory SBF to work with. I feel like we get shafted out of all countries that got the atrix.
I just got my battery life issues sorted out, So even if i were able to try it, I wouldn't want to, But maybe there are useful fixes in it for the developers. We are getting custom roms for the ATT phones. Hopefully bell and international are soon.
I saw a post on motorola's forums from a guy who has a bell atrix that wants them to post a factory sbf for us so that we are "on par" with other countries around the world. i agree.
Should we stay on 2.1.1 and wait to flash the modem only or is this version better than 2.1.1
I hAve a bell atrix..
Sent from my MB860 using XDA Premium App
I am/was rooted and I was able to do the update. Just a bunch of fixes in it I guess. No major changes except for the faster upload. That's nice
You will have to re-root after installing it though. Gingerbreak works fine.
i installed the french sbf to get grey blur going so i'm guessing update won't work...
hburn said:
Should we stay on 2.1.1 and wait to flash the modem only or is this version better than 2.1.1
I hAve a bell atrix..
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I'd like to know this as well.
I'm thinking of at least flashing the new radio after work today though. People seem to say it's better than the one shipped with 2.1.1. I'll keep checking these threads though to wait for more comments.
Thanks for sharing your comments and experiences, guys. It's always very much appreciated.
I Didn't say it wont work for the french SBF, I just haven't tried.
I'm at work right now and can't have my phone go down at all, or i'll get fired. Which is why im not just jumping in and testing it.
Can someone confirm if it works or not with the Telstra SBF? I'm not on stock sbf, im greyblurred. If it does work, i'll re-sbf this thing to 2.1.1, and run the bell update.
I think my issue is that i'm rooted/greyblurred. So unless is flash sbf, and then try, i doubt it will work here.
I tried to run this over the French SBF, but was unable to.
binary110 said:
I Didn't say it wont work for the french SBF, I just haven't tried.
I'm at work right now and can't have my phone go down at all, or i'll get fired. Which is why im not just jumping in and testing it.
Can someone confirm if it works or not with the Telstra SBF? I'm not on stock sbf, im greyblurred. If it does work, i'll re-sbf this thing to 2.1.1, and run the bell update.
I think my issue is that i'm rooted/greyblurred. So unless is flash sbf, and then try, i doubt it will work here.
Click to expand...
Click to collapse
Zero-K said:
I am/was rooted and I was able to do the update. Just a bunch of fixes in it I guess. No major changes except for the faster upload. That's nice
You will have to re-root after installing it though. Gingerbreak works fine.
Click to expand...
Click to collapse
Did the rooting method work on this? Can you verify if the WebTop without Dock MOD works on this?
sservati said:
Did the rooting method work on this? Can you verify if the WebTop without Dock MOD works on this?
Click to expand...
Click to collapse
I took the Bell 37.23 update this morning.
My root was gone (I had originally rooted using GladRoot 4.3) and there was no longer any /osh/sbin/frozenfish.
I re-rooted my 37.23 using Gingerbreak 1.20 and it worked perfectly.
EDIT: just ran Speedtest.net mobile in downtown Montreal (great reception quality) and got 5737 kbps down and 2335 kbps up
Can I run the update even if i have froze all the bloatware? And will I have to re-freeze them after the update? ¸
I am kinda new to android but have a good experience in modding other mobile os (webos, wm5).
Thank you
quick question
i have french sbf
can i restore stock bell sbf to get this update
if yes where can i get stock bell sbf
Here is the a link I found that is still working on Rapidshare for V21D.KDZ
If I am wrong, and it is already posted in here then please let me know.
345MB direct download
https://rapidshare.com/#!download|612p2|457678976|V21D_00.kdz|361942|R~DCA85DA16620B9FDCA64039AE6782155|0|0
It seems kinda slow so i will also post a torrent up here after I make it for better speed, I can Upload faster than rapidshares unpaid speed. 3/22/12 @ 2:00pm
Please give thanks if this helped you !!
Thanks,
D
which one is v21d? Is this newer than v21p?
Don't think so, V21D is newer than every other one, but I just heard about V21P an hour ago.. Cant seem to find a working link for V21P though. Is this an official
ATT baseband that I am hearing about ??
Hello!
Heard anything more about the V21P kdz?
Where did you hear about it?
i just updated my thrill officailly with the att version today....i know my computer downloaded it through the official lg updater tool, how can i fetch it from my computer so that i may share?? btw i did it on a xp machine
dwaynedman said:
Don't think so, V21D is newer than every other one, but I just heard about V21P an hour ago.. Cant seem to find a working link for V21P though. Is this an official
ATT baseband that I am hearing about ??
Click to expand...
Click to collapse
Look through the 'General' area in the forum, read the through most of them and you'll soon see that the Official GB Baseband is called v20p
Sent from my LG-P925 using XDA
Is this the v21D from the Optimus 3D? If so, here's the link from LG themselves:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/ADEUML/V21d_00/V21D_00.kdz
Make sure csmg.lgmobile.com has been unblocked in your hosts file before downloading.
Warning : This may brick your phone . I am not responsible for damaged devices.
OTA IS ONLY FOR AT&T
Here is the OTA update zip
CAUTION!!!!
Some users reported bricks
failed to boot 1
http://db.tt/ATldH97n
And 38P Radio Rom (pulled from ota)
http://db.tt/AkQHXIc8
I dont prefer to flash ota
And the fruitcake
All credits goes to NYG-SBXLII
THIS IS FOR UNLOCKED DEVICES ONLY
BE SURE TO BACKUP BEFORE FLASHING
DONT FORGET TO WIPE USER DATA
Download here http://www.mediafire.com/?yofp249u4bcc26m
why ravilov 38p radio is less its 8.9mb
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom
Maybe compression level is different.
blttalas said:
Maybe compression level is different.
Click to expand...
Click to collapse
should i reflash with your radio or its the same
It's the same. Not sure why he decided to repack the same radio I already uploaded or how he did it (my unzip is reporting some warnings), but the radio images inside are exactly the same in both.
ravilov said:
It's the same. Not sure why he decided to repack the same radio I already uploaded or how he did it (my unzip seems to be reporting some warnings), but the radio image inside is exactly the same in both.
Click to expand...
Click to collapse
ok thx
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom
ravilov said:
It's the same. Not sure why he decided to repack the same radio I already uploaded or how he did it (my unzip is reporting some warnings), but the radio images inside are exactly the same in both.
Click to expand...
Click to collapse
Sir I can't find your radio?
I used 37p radio zip
Sent from my MB860 using xda app-developers app
blttalas said:
Sir I can't find your radio?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=37666539#post37666539
http://forum.xda-developers.com/showthread.php?p=37688490#post37688490
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom
Ok I saw
Sent from my MB860 using xda app-developers app
where did you find this? Is it an official release from dem motorolin? I cannot find anything on motorola's entire site that references anything at all with 4.5.145.
Also, how can every single file in the zip be 1KB in size, there's a few that are bigger than that but only a handfull maybe, every file is listed as just 1KB. Compression rate is way under 50% so it's not an elite intergalactic method of compression.
Just wondering why you always post things you dont test and just put a label that says it may brick your phone. No screenshots, no explanation or details about anything useful to someone who is risking bricking their phone while trying one of your downloads. I'm just confused why do a half-ass post without testing anything first
I agree with Android DEP.
I also want to know where it came from.
Is this for AT&T, Europe, Asia? Is it universal?
Did you install this on your device?
It is reckless and irresponsible to post stuff like this and hope someone else installs it first.
Grow up before you brick someone's device.
____________
Android DEP,
Moto did come out with an update with this name even though it is not on their website. This is probably the real deal.
Not all the files are 1KB, but most are. They also seem to be compiled or encrypted.
OTA4.5.145/patch/system/build.prop.p is just a bunch of gibberish.
Overall it appears to be a minor update: New radio, new webtop files, (presumably) updated app and framework files.
Pretty much what Moto said it would be.
Edit:
http://www.androidpolice.com/2013/0...o-build-4-5-145no-its-not-ice-cream-sandwich/
Edit2:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/92735
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom
android-DEP said:
Just wondering why you always post things you dont test and just put a label that says it may brick your phone. No screenshots, no explanation or details about anything useful to someone who is risking bricking their phone while trying one of your downloads. I'm just confused why do a half-ass post without testing anything first
Click to expand...
Click to collapse
Was about to post the same thing, what if a newb wants the "last" motorola update and flash this?? No ONE have tried it so it could brick unlocked phones..Try it before posting.
Edit: Just noticed upndwn already posted my point, sorry.
Sent from my MB860
The zip is not flashable in recovery, so no bricks.
(not that the OP knew that)
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom
This seems a collection of patches for 4.5.141, I guess you have to install that first and then flash this.
As for source, this may be the update from the soak test.
Enviado desde mi MB860 usando Tapatalk 2
F**k noobs, the community have rules and if they dont follow it, they deserve what they get.
but a "[OTA] ATT Blur Version 4.5.145 2.3.6 And 38P Radio" in the thread name, or "...FOR ATT DEVICES...", would make things a lil better.
also, bet a lot of you tried to flash the ATT SBF knowing the risks just to try to unlock its bootloader two years ago, so chill out.
its only ota i installed 4.5.141 sbf and downloaded ota pulled from /cache and shared
marcovrv said:
This seems a collection of patches for 4.5.141, I guess you have to install that first and then flash this.
As for source, this may be the update from the soak test.
Enviado desde mi MB860 usando Tapatalk 2
Click to expand...
Click to collapse
After checking out the updater-script and being pretty sure it was not flashable I restored to GB236 and tried to flash it...nada.
guidoido004 said:
F**k noobs, the community have rules and if they dont follow it, they deserve what they get.
but a "[OTA] ATT Blur Version 4.5.145 2.3.6 And 38P Radio" in the thread name, or "...FOR ATT DEVICES...", would make things a lil better.
also, bet a lot of you tried to flash the ATT SBF knowing the risks just to try to unlock its bootloader two years ago, so chill out.
Click to expand...
Click to collapse
We were all warned about the dangers of flashing the pudding file. It was explained to us in great detail. The difference here is that the dev flashed the pudding file himself and did not brick his device.
This guy didn't even try to install it himself.. That is irresponsible.
Does it have soomething different compared to .141 firmware?
Gps and security fixes
Re: [OTA] Blur Version 4.5.145 2.3.6 And 38P Radio Rom [ONLY AT&T]
I was able to take the ota and remove the the new bootloader edit the updater script and install. If no one has done so by the time i get home from work ill upload a fruitcake sometime later today for anyone that would like to safely test the update
Sent from my MB860 using xda premium
Saw this on the Android Central forum, thought I'd share it here. I have not tried this myself, but the OP, SamurHL is a trusted developer and source, the creator of House of Bionic.
!!!WARNING!!!
THIS IS ONLY FOR PEOPLE WHO HAVE NOT ALREADY TAKEN THE JB UPGRADE. YOU WILL BRICK YOUR PHONE IF YOU HAVE ALREADY UPGRADED YOUR BIONIC TO JB AND YOU TRY THIS. I'M NOT KIDDING.
Furthermore, this is not my hack. I am not responsible (nor is anyone else) for you monkeying about with your phone if you break it.
SamuriHL said:
Re: DROID BIONIC Jelly Bean Update
So, thanks to timmy10shoes (one of my Bionic mentors), we have a new method for people to use to get to JB. All of you (including myself) who rushed to upgrade are going to kick your own @$$ now. Trust me. Using the cdt.bin from the 246 FXZ and using it to replace the cdt.bin from the 98.72.22 FXZ, you can then use the House of Bionic's FXZ Keep Data option to upgrade to JB. Big deal, says you...I'm already upgraded....so what....Ah the skeptics. The big deal, says I.....say you don't like JB or can't live without root. Fine....put the 246 FXZ back into the House of Bionic and downgrade away. "WAIT, WHAT??!! I heard, FROM YOU, that I'd brick my phone doing that!" Yes, YOU will...cause YOU took the update and didn't use this process. Therefore your security is updated. Using THIS method, however, the security is NOT updated and you can happily downgrade to your heart's content.
I take NO responsibility for those that try this. This is a USE AT YOUR OWN RISK and I will not provide ANY support for it whatsoever. But it has been confirmed to work so long as you follow the quite simple directions EXACTLY.
A word of warning...those who took the JB update already, don't bother. You're screwed. You WILL brick.
Click to expand...
Click to collapse
External link to House of Bionic
External link to original Android Central forum discussion.
Well this is intriguing. Gives me something to try tomorrow.
jjkoolaid said:
Well this is intriguing. Gives me something to try tomorrow.
Click to expand...
Click to collapse
Please post your feedback...
I'm a corporate user... can't go for trial and errors...
sent from my DROID BIONIC via Reliance Wireless
Sorry, work then races got home late. Shower and sleep. Let ya know tomorrow
Sent from my xt875 using Tapatalk 2