Related
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
Hello everyone,
first of all, thanks for reading this.
So here's a short scetch of the details of my phone:
I have an samsung GT-s5570 galaxy mini I, and a half year ago i succesfully rooted it, now it's running android 2.3
Today I tried to upgrade it to 4.1 with cyanogenmod 10, so i did the recovery, update thing, but i forgot to install clockworkmod. after a 'succesfull' update, rebooting ends up giving me a black screen, normal startup gets stuck at the samsung logo. i tried to update it to the version it ported with, i tried to update it to the root thing, but none of these changed anything. Odin multidownloader doesnt detect it, even system wipe/factory recovery doesnt change anything. I'm not able to figure out how to fix this, please someone help me with fixing this and/or updating it to android 4.1 with cyanogenmod 10? thanks in advance!
Coolie_747 said:
Hello everyone,
first of all, thanks for reading this.
So here's a short scetch of the details of my phone:
I have an samsung GT-s5570 galaxy mini I, and a half year ago i succesfully rooted it, now it's running android 2.3
Today I tried to upgrade it to 4.1 with cyanogenmod 10, so i did the recovery, update thing, but i forgot to install clockworkmod. after a 'succesfull' update, rebooting ends up giving me a black screen, normal startup gets stuck at the samsung logo. i tried to update it to the version it ported with, i tried to update it to the root thing, but none of these changed anything. Odin multidownloader doesnt detect it, even system wipe/factory recovery doesnt change anything. I'm not able to figure out how to fix this, please someone help me with fixing this and/or updating it to android 4.1 with cyanogenmod 10? thanks in advance!
Click to expand...
Click to collapse
Have u tried going download mode? if yes then may b samsung usb drivers aren't installed on ur system!.. this is why odin is nt detecting it!
Coolie_747 said:
Hello everyone,
first of all, thanks for reading this.
So here's a short scetch of the details of my phone:
I have an samsung GT-s5570 galaxy mini I, and a half year ago i succesfully rooted it, now it's running android 2.3
Today I tried to upgrade it to 4.1 with cyanogenmod 10, so i did the recovery, update thing, but i forgot to install clockworkmod. after a 'succesfull' update, rebooting ends up giving me a black screen, normal startup gets stuck at the samsung logo. i tried to update it to the version it ported with, i tried to update it to the root thing, but none of these changed anything. Odin multidownloader doesnt detect it, even system wipe/factory recovery doesnt change anything. I'm not able to figure out how to fix this, please someone help me with fixing this and/or updating it to android 4.1 with cyanogenmod 10? thanks in advance!
Click to expand...
Click to collapse
Firstly, it was a dumb thing to do to flash a custom rom through stock recovery. Secondly, you can't fix it just by wiping data, you gotta flash stock rom via ODIN. Thirdly, to let your computer's ODIN detect the phone, it's gotta be in download mode. To go into download mode, just press and hold Home+VolumeDown+Power buttons.
There's a guide available in my sig feel free to refer to it.
I have a galaxy mini s5570 with Froyo, yesterday I want to upgrade the firmware directly via Newest Kies downloaded from samsung site,
The first stage, the firmware download is complete, until the update process is running about 9%, suddenly I just pull out the sdcard, afraid interrupting the process, Hence an error message that occurs, the process must be repeated with the code ...
then the problem begins when I try to reupdate with code, kies ask me to make my galaxy into recovery mode, from this point until now my galaxy mini can not enter recovery mode, and if my galaxy is turn on its only flashes and become warm-> hot
until now my galaxy is still in the same condition
please help me , I don't know which process that must be use to recover my galaxy
mazai79 said:
I have a galaxy mini s5570 with Froyo, yesterday I want to upgrade the firmware directly via Newest Kies downloaded from samsung site,
The first stage, the firmware download is complete, until the update process is running about 9%, suddenly I just pull out the sdcard, afraid interrupting the process, Hence an error message that occurs, the process must be repeated with the code ...
then the problem begins when I try to reupdate with code, kies ask me to make my galaxy into recovery mode, from this point until now my galaxy mini can not enter recovery mode, and if my galaxy is turn on its only flashes and become warm-> hot
until now my galaxy is still in the same condition
please help me , I don't know which process that must be use to recover my galaxy
Click to expand...
Click to collapse
Enter download mode and flash the Firmware with Odin. That will work (for me), i think it shall work for you too.
F4uzan said:
Enter download mode and flash the Firmware with Odin. That will work (for me), i think it shall work for you too.
Click to expand...
Click to collapse
i've tried download mode
i pressed the power + volume down + home
but there's only flash... same with the first time ,
for the ODIN .. should I uninstal the kies before instaling Odin?
btw thanks for the advice gan
FW upgrade encountered an issue. Plz select recovery mode in kies & try again (i537)
Help!! so i try to root my Samsung Galaxy S4 Active SGH-I537 (android 4.3 & I537UCUBML2) had it on debugging mode too.
i think i broke it :crying::crying::crying::crying::crying::crying::crying:
so i was following this steps:
Google: root 4.3 ml2 galaxy s4 active i537 -- the first link!! (i just sign up for XDA so i cant post the link)
everything was going just fine until this step, i know i didn't get far.
"Now once loaded, hit the “START” button, it only takes a while to flash then wait until the phone reboots."
so i hit the start button but it said it FAIL, i reset and hit the button once again and it said it fail. At this point I decided to just give up and try another day. but there was a little problem. I didn't know how to EXIT the download mode. I did i little google search and the only thing that suggested was to take out the battery, so i did. Now when every i boot my phone I get this message:
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
any suggestions? please?
I just got this phone!!
thanks in advance!