Guyz my x8 ain't stable at 691 mhz.. on stock kernel ....
I tried many roms it is not stable on froyobread,gcr,gdx,kuyadroid,
And xgin...but my phone restarts smtimes whn I use
Some app it don't always reboots but sometimes it just
Freeze n reboot .... what's the max freq stable you guyz got
On stock.kernel? ??
is it.my hardware problem .... I use superchrage ...
Balanced 3 settings....can something be done will changing
The kernel help it? ???
noobismyname said:
Guyz my x8 ain't stable at 691 mhz.. on stock kernel ....
I tried many roms it is not stable on froyobread,gcr,gdx,kuyadroid,
And xgin...but my phone restarts smtimes whn I use
Some app it don't always reboots but sometimes it just
Freeze n reboot .... what's the max freq stable you guyz got
On stock.kernel? ??
is it.my hardware problem .... I use superchrage ...
Balanced 3 settings....can something be done will changing
The kernel help it? ???
Click to expand...
Click to collapse
The higest Freq that my phone was able to go up to was 787 mhz,, and It was stable at 768, If you want to stick to stock kernel,, you might try changing oc module, There are 2 oc modules one by DX and other ones By Zefie,
The best option however is to unlock your Bootloader and Use a custom kernel , according to some people unlocked bootloaders increased their phones oc capabilities .
I am running gingerdx v0.22 and CPu is stable at 768..I am currently having stock kernel.
Related
Hi all
I 've wildfire with root access .I tried to flash it with all custom ROMS's, only CyanogenMod run after reststart but wasn't stable, others couldn' t even start after reboot. Loaded kernels ,without OC dosn't help. I only need try OC .Can it be done without reflashing whole ROM ??
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
I use the stock HTC Wildfire ROM overclocked @768Mhz and sometimes it just get fkd up when i write messages ... Im gonna change phone asap
Sent from my HTC Wildfire using XDA App
MySelf_v1 said:
I use the stock HTC Wildfire ROM overclocked @768Mhz
Click to expand...
Click to collapse
My HTC switches off casualy on 768Mhz i think this is too high for any Wildfire
Mine seems stable now at max 652mhz and min 245mhz ... i get like 3.8 mflops and I think thats nice?
Mine works fine on cyanogenmod with oc 768 mhz
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
dakhr said:
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
Click to expand...
Click to collapse
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
relesman said:
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
Click to expand...
Click to collapse
Kernel from this topic:
forum.xda-developers.com/showthread.php?t=798471
Stock ROM-my Wildfire is completly "resistant" to any custom ROM(do not boot ,crash, screen freezes etc)
™¤»Aamir«¤™ said:
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
Click to expand...
Click to collapse
Yes i've orginal ROM only OC kernel flashed
Kernel here :
forum.xda-developers.com/showthread.php?t=798471
How to..
Hi, how do I overclock? I mean, what app do I have to use? I also find a picture showing the temperature in the status bar - maybe it is also possible to show the speed as well.
M.
buy SetCpu from android market
Mines can do 748mhz ,but if i set 768mhz,it can't boot and become a "soft brick"(use clockwork mod recovery to recover it)
I use cyanogen mod 7 #17
I found 691 to be most stable for every ROM i tried so far. SetCpu can be found free somewhere in the XDA forum.
I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?
Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App
Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..
You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.
Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"
Which rom are you using? Did you have the same problem on stock rom?
Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?
If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium
GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...
I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!
LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective
approach samsung and get new phone..
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for
hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?
I'm done explaining
A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!
Hi need help i always cannot oc my x8. I am using alfs kernel + GDX and it'll freeze and reboot if i set to 748mhz or higher.
Today i tried to use Gingercruzt + nAa kernel I also cannot oc too. Anyone experience this problem??? Help
Phone reboots after OC
Hello am currently using MiniCm7 2.1.6 + nAa kernel 08b using governor interactive min 122Mhz and Max 729Mhz and enabled the set on boot and runs very smooth it only takes 44 secs to fully boot with many apps intalled that are required to start on boot as far as i`ve been using it i had no issues, with preloaded settings min 122Mhz and Max 600Mhz i got a score of 1764 running nice and neet no concerns
Thanks to the great effort of nobodyAtall and DaRk dOg
say thanks if this helped you...
Sent from E15i
__________________
MiniCM7 2.1.6+nAa-08B kernel
I like to keep it simple
8GB Class 10 MicroSDHC
Every phone is different, If a x8 is stable at 748 mhz it is not necessary that other one should..
Mine also not stable at 748 mhz so if your phone is not stable try lower frequency..
Thanks a lot for the info My X8 still reboots if i set to 748Mhz so i only can use 729Mhz
Sent from my E15i using xda premium
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
More is not a good idea for daily use... You will get some lag in multitasking..
Best for daily use (to my point of view) is 122 / 729.. More my phone was very laggy sometimes..
how to overclock in the first place?
can someone please give me the link on how to do it??
thanks!
Bah,
Go on parameters > cyanogemmod > performance > CPU : select your frequencies, check overclock and keep on boot and reboot.
If you've got the good kernel (as naA), that's all
i'm using gingerdx v22 with stock kernal
and i can OC it To 787
but i prefer 748 or 768
it's just luck!
but 748 is good,isn't it? at least for me
You can try and play with various governors,i think some go higher....
Guys, in general, there are 2 kinds of X8 concerning hardware.
If you got lucky, then you can overclock your X8 up to 806.
On the other hand, if you are unlucky (like me), then you will NEVER be able to have a stable OC over 719. It is just a matter of hardware
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
wilbso said:
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
Click to expand...
Click to collapse
or no..for me it's the same..but i use alfs and i can go up to 768mhz..in nAa i only can 748mhz..
then OP, CHANGE KERNEL!
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
signashoes007 said:
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
Click to expand...
Click to collapse
Follow the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1020313) and then you will be able to overclock your X8, even without unlocked bootloader.
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
boisdulait said:
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
Click to expand...
Click to collapse
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Sent from my XPERIA X8 using xda premium
signashoes007 said:
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
Click to expand...
Click to collapse
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
I can Oc to 691mhz only ....
guess am the most unlucky here... ;(
I can overclock to 729 mhz!!
After dat phone works like a charm!!
SONY ERICSSON XPERIA X8
ACHOTJAN SEMC DEBRAND ENGINE V1.0 FINAL
bootloader unlocked ;-)
nAa -11 kernel
NIMBAH said:
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Click to expand...
Click to collapse
Yes I saw.. I should have edited my post.. but thx
Triptamine said:
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
Click to expand...
Click to collapse
nice to hear that..thanks!
anyway, when I went from v22 to v23b, the x8oc.ko on the module folder has been deleted..so i guess(not really sure) that it would be deleted when you install another rom..
-gab-
earth android
Hello,
My phone -xperia x8 white e15i
Kernel - Stock
It don't matter what Rom I use I can only OC till 691 MHz at 710mhz my.phone freeze and reboot.
also I get reboot time to time on 691.
I heard that very x8 should atleast be stable at 710
my question is.
Do I get a higher stable frequency if I use a different module other than Dix's???
I came across a module which offers a higher frequency .... search for better overclock you will find the thread.....so will I get a higher frequency? ?? using the other module???
I USED THE SEARCH BUTTON BEFORE POSTING.
so don't yell at me. : )
Help
I'm not too sure about this one since I'm a part noob much like you but have you tried flashing a different kernel such as Alfs? linuxxd is really good but doesn't allow overclocking as I found out with the same problem as yourself Sorry I meant stock kernel doesn't allow overclocking ...
If I helped you please answer my question on a new thread I made
It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.
A custom kernel allows better overclocking most of the time. When I was on stock kernal the highest I could get to was 710Mhz before rebooting. With a custom kernel I can get to 787Mhz before rebooting.
Sent from my E15i using xda premium
@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????
Chris95X8 said:
It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.
Click to expand...
Click to collapse
dependent on yes. with stock kernel to kernel naa 691 Mhz 806 big diference
what about.a different module??? it can increase potential? ??
noobismyname said:
@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????
Click to expand...
Click to collapse
You need to understand that the stock kernel is not designed for overclocking, it's only possible with modules for stock kernel.
You can try the other module but I doubt it'll be any improvement, if you want better overclocking you really should install a custom kernel.
Sent from my X8 using xda premium