Database Develop

getting hangs while overclocked?

I tried overclocking my phone with galaxian and semaphore kernels. I overclocked my phome to 1.2ghz and tried other frequency not lower than than 1ghz but I keep on getting hangs when waking up the phone to unlock and sometimes while using the phone. how do I fix thix problem? I'm on darkys rom 10.2 extreme edition.
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2

Galaxian is on 1.2 ghz on default only then how did you overclocked it ! Try semaphore kernel its better, believe me i have used galaxian for 2 weeks on jetpack rom and got bit of lags and quadrant score near 2600 only while on semaphore I get 3000 on 1.2ghz after overclocking using tegrak overclock app.
Sent from my sgs
kernel: galaxian
Rom: jetpack

i used both tegrak and set CPU apps to overclock it. when i used the tegrak, i clicked on the load module then clicked on CPU max frequency, chose the 1.2ghz, then says watching stability the the watcher stopped working or the countdown stops at 298. chose another frequency it did the same. i tried it until the countdown works, and it works but i get hangs sometimes. would you be good enough to give me all info to overclock it manually in the optimize menu in the tegrak app?? thanks

anyone have fix for this?

yes, clean your phone and install Tornado.

I was using tegrak. But my suggestion is dont use oc. Bcs OC is always risk and we are not getting any performance increase except the benchmark score.

First try wiping cache/dalvik cache and use Ultimate Kernel Cleaning Script - 2.0 via CWM. If that doesnt improve the lags better do a full install via odin. Its better than a factory reset co's u will lose all ue data any way. Pls do back up all of ur apps and personal data. Try using mybackup root or titanium backup from market.

i think you should overvoltage on 1200mhz
you can use tegark overclock ultimate or voltage control ultimate

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

[Q] help for oc alfs

hello I have ROM and kernel GignerDx Alfs, how can I turn up the processor to a value such as 700MHz? because I have a choice only between 600 and 729mhz. At 729 I restarts: (Please help

GingerDX doesn't support OC, so it depends only on kernel. Alfs allow You to choose from several frequencies. You should try SetCPU or similar app, but IMO it won't help.

Q) About overclocing and my ROM!

I currently use Prime HD ROM with nAa kernel. Whenever i overclock my cpu to 783 Mhz it shows red led and freezes. Any way to go higher? Als what governor is best to choose. And which kernel is faster with PrimeHD nAa or Alfs. Id like to try out alfs so can anyone give me link to the thread.???Sorry my bad english skills!

strenoob11 said:
I currently use Prime HD ROM with nAa kernel. Whenever i overclock my cpu to 783 Mhz it shows red led and freezes. Any way to go higher? Als what governor is best to choose. And which kernel is faster with PrimeHD nAa or Alfs. Id like to try out alfs so can anyone give me link to the thread.???Sorry my bad english skills!
Click to expand...
Click to collapse
If it freezes it means that your phone's chip can't handle 783 MHz. My phone can go up to 748 MHz. Not everyone's is the same.
With primehd alfs is faster, go to android development section and you will find alfs kernel or search it. Make sure you download alfs cm7 not gdx
Hit the thanks button if I helped!

what is the best overclock kernel

Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.

AtanasP said:
Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
Click to expand...
Click to collapse
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)

kalpetros said:
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
Click to expand...
Click to collapse
I use semaphore with stock volt and 1.2 Ghz SmartassV2 - Noop and it work flawlesly

Ehndroix V + Neo Kernel // CyanAOSP + CyanCore
Using Neo Kernel, probably the best kernel i ever used so far.
It bases on Linaro 4.9, while the most other Kernels sit at 4.7 still.
For Antutu it keeps up at its highest preset: 1.32 GHz (Intelliactive) and I/O: BFQ (Stock). Getting impressive 6059 points.
For daily use i have it at 1.2 GHz, had no crash yet.
The kernel runs butter smooth with Ehndroix V.
The Best Kernel for Gaming is probably the CyanCore Kernel, if you use it with CyanAOSP (comes Stock with CyanCore Kernel) its the smoothest gaming experience so far i had on this device after the Legendary GamerzRom..