Database Develop

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

[Q] X8Overclock and Alfs Kernel

in alfs kernel the max cpu clock is 787, i wanted to go to 806mhz.
coz ive been stable on 806mhz on STOCK kernel and now ive flashed alfs kernel but its limiting me at 787mhz -.-? help? or could i just load the module like i did with stock kernel? would it work?

my phone heated up like hell in just 15 min when i flashed 815Mhz...i used gc 8.4 then...stable at 710 Mhz....

ahhahaahhaah ..you noob : )

pls answer my question guys,
u're going off topic ==!

n1kolaa said:
ahhahaahhaah ..you noob : )
Click to expand...
Click to collapse
haha...the ics port was supergood...but im still a noob and thats a fact...so step by step learning and i learned about modules... today ive been playing with nexus rom ported to x8.....
and to the thread: by the way the alfs kernel was supergood for gdx...i havent used that rom...will xperiment this night with gdx...which rom are u using anyway???

im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?

imrano1210 said:
im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?
Click to expand...
Click to collapse
Flash miniCM and nAa kernel.best rom and kernel,and in overclock you can go upto 825 mhz.
Sent from my E15i using xda premium

Alfs kernel have OC module inside. No matter what rom you put on it max will be 787.
Also if you NOT delete oc/uv module from rom it will cause instability when OC.

806 Mhz .. with alfs kernel it imposibble.. why did u need higher freq, even if the 787 Mhz is pretty stable..
*Sorry for my bad english

[Q] What kernel and rom?

What is the best kernel and custom rom for me? I have an xperia x8 and need one that can support dual touch as my screen is cypress. I'm currently on stock kernel with gingerxperia v13.
Which kernel is the fastest and best for playing games etc. and that can also support dual touch?
Thanks

None. For me..
Sent from my Xperia X8 using xda premium

It has been answered a lot of times... there are 2 or 4 topics here with best kernel-rom discussion. Please check them.
Sent from my heart using a brain )

gengerxperia v20 it`s very good

GingerXperiaRay v3 with nAa-08 kernel ...
Works great ~

I use alfs kernel + gingerdx v21...its very fast and stable...but the phone itself cant go superfast...put only what you need and it sould be allright!!!!

Antreas Kal said:
I use alfs kernel + gingerdx v21...its very fast and stable...but the phone itself cant go superfast...put only what you need and it sould be allright!!!!
Click to expand...
Click to collapse
and you don't have problems with ext partition or app2sd in alfs kernel?

GINGERXPERIA v21+Alf v06+Swap+Optmizer+Odex=speed and smooth
BTW THANK ME IF I HELPED YOU

I also use GinderDX with ALFS kernel, but I think I'm going to change it for something more stable.

I recently changed to froyopro v2.2 whit alfs v6 kernel,and i can't believe how fast it is,and stable of course!Reaaly recommend you to try!

akaSk8krew said:
and you don't have problems with ext partition or app2sd in alfs kernel?
Click to expand...
Click to collapse
app2sd works fine for me! ext partition dont know though....

I am using S-rom V008 with nAa V09 + odexed and runs very smoothly. 729 max, 245 min. Smartass V2 with bfq i/o scheduler.

gingerxperia v25 especial edition with nAa kernel v10 .......very fastttttt........
hit thnks,....

[Q] My X8 keep rebooting after OC help

Hi need help i always cannot oc my x8. I am using alfs kernel + GDX and it'll freeze and reboot if i set to 748mhz or higher.
Today i tried to use Gingercruzt + nAa kernel I also cannot oc too. Anyone experience this problem??? Help

Phone reboots after OC
Hello am currently using MiniCm7 2.1.6 + nAa kernel 08b using governor interactive min 122Mhz and Max 729Mhz and enabled the set on boot and runs very smooth it only takes 44 secs to fully boot with many apps intalled that are required to start on boot as far as i`ve been using it i had no issues, with preloaded settings min 122Mhz and Max 600Mhz i got a score of 1764 running nice and neet no concerns
Thanks to the great effort of nobodyAtall and DaRk dOg
say thanks if this helped you...
Sent from E15i
__________________
MiniCM7 2.1.6+nAa-08B kernel
I like to keep it simple
8GB Class 10 MicroSDHC

Every phone is different, If a x8 is stable at 748 mhz it is not necessary that other one should..
Mine also not stable at 748 mhz so if your phone is not stable try lower frequency..

Thanks a lot for the info My X8 still reboots if i set to 748Mhz so i only can use 729Mhz

[Q] help for oc alfs

hello I have ROM and kernel GignerDx Alfs, how can I turn up the processor to a value such as 700MHz? because I have a choice only between 600 and 729mhz. At 729 I restarts: (Please help

GingerDX doesn't support OC, so it depends only on kernel. Alfs allow You to choose from several frequencies. You should try SetCPU or similar app, but IMO it won't help.