Database Develop

Problems rooting

Sorry another noob just joined the forum.
I have been researching periodically for about a month now and jumped in last week and attempted to root my phone. I believe that I rooted it after upgrading to 2.27.651.5. I could not successfully flash the recovery.img.
The program that pops up on the phone gave me an error message. Should I root the phone again from the beginning?
After this is successful all I have to do is load a ROM onto the phone and I will be set am I right? As of right now my rooted? phone is having problems connecting to the mobile network and I can only connect to the WiFi networks to get internet.
Sorry for being such a noob. I have tried searching and researching but the terms used are unintentionally geared towards people who know about this stuff unlike me.
Thanks for any help.

Just want to say you have an awesome username lol. Hopefully someone can help you out

If your phone was successfully rooted then yes all you would have to do is load a ROM and you'd be all set but it seems like your phone didn't get rooted. When you root a phone correctly it won't interfere with anything already on the phone, it will just add functionality. When I rooted my hero I had to drop from the .6 build to the .5 and after I rooted it my gps and such didn't work so it might have been the build I downloaded onto the phone or the rooting process I used was wrong. I would try to wait until a dev puts together a guide on how to root the .6 build(the latest Android 2.1 build) and then root it. I have some experience with rooting so ill keep looking for a .5 build that works properly after being rooted and if I find one ill let you know what to do and all that fun stuff. And you do have a pretty awesome user name if you have any other questions email me at [email protected]
Sent from my HERO200 using XDA App

Stock Nexus Root Steps

I've been doing a lot of reading regarding rooting the Nexus one and unlocking the bootloader etc. I wish not to unlock the bootloader at this stage (as you can't lock it again, and the fact that i'm gonna be playing around with my dad's phone and wouldnt want anything to happen to that)
Right now, the phone has stock 2.3.4 installed, which I believe needs to be downgraded to be rooted.
So I downloaded the FRG83 release.
Now is the following right/possible:
Flash the phone with FRG83 by going into the phone's recovery - so the phone is downgraded
Root the phone using the superoneclick method
Now the phone is rooted and I can flash it with any custom ROM eg, CyanogenMod 7 etc..?
Sorry if this has been covered earlier, however I tried my best to read as much as I could, however there were always a few more steps involved in the process which I thought could be left out
So would the above process be okay?
Thanks

You have to use the PASSIMG.ZIP method to downgrade.
I would just read the WIKI
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus

Read the wiki. You said you been doing a lot of reading but still do not know how to root/downgrade from 2.3.4. That makes no sense.
The steps are there for a reason.
You don't know what you're doing but come to conclusion that you can skip/leave out steps. That is flat out stupid.

Thanks
Thanks baseballfanz Yeah I've read the wiki and I was going to use the PASSIMG method, hence downloaded the FRG83 file, but somewhere else I had read that you had to flash it to froyo then back upto gingerbread :/ hence was a bit confused.
The problem is there are too many threads about it. And there are a few tiny differences in all.
So I guess I have to flash down to froyo and then use superoneclick.
And after that, I can just flash any ROM from the forum?
Alubundy2010, mate I did read it all and understood it. However I still had a few questions. If you didnt wanna help, it would've been best to keep your mouth shut.
Thanks

It is clear you did not and still don't understand it.

Yeah probably not, hence why I posted asking for help in the first place. Just spent an hour trying to do it, but stuck at froyo for now till I do an official OTA update tmrw morning and have a stock unrooted phone, cus I honestly don't have the balls to brick my dad's phone. So not rooting till I'm 100% sure of what I'm doing.
Thanks a lot for all the amazing the help.

Wiki clearly says:
"Gingerbread 2.3.4 can be rooted only when downgraded to 2.3.3 or to Froyo, using PASSIMG method, which will wipe the phone"
And the link is given - landing you on the same page, a bit upwards. The link contains EVERYTHING needed to downgrade.
Moreover, the following sentence points you to a VERY simple guide, which says: when you downgrade, you root. Without any additional steps. And from that point you do whatever you want.
The main guideline of XDA should say - "if you don't know what you're doing - stay away from rooting until you do". Obviously you don't, and you don't seem willing to learn by reading the proper guides, even when pointed to.
And just to make sure you got it: you can't root the latest OS version. Which means, if you downgrade and wait for the OTA to upgrade you back to the latest version, you'll finish (again) without the ability to root, and this time also without the ability to downgrade. Not quite smart, yes? If you want to avoid unlocking the bootloader, that is.

Now that the phone is running froyo you can root.
You should also have gotten the ota notification basically as soon as the phone finished booting.
Sent from my Nexus S using XDA App

I've read through
http://forum.xda-developers.com/showthread.php?t=939243
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
http://forum.xda-developers.com/showthread.php?t=636795
http://forum.xda-developers.com/showthread.php?t=705460
http://forum.xda-developers.com/showthread.php?t=1084978
think that's a fair few guides I've been through, and that's probably why I can't get it write cus I'm jumping from one page to another :|
Oh well thanks for the help guys, and I did actually do all the reading that was required.
Oh and I also rooted the phone when it was on Froyo through the manual superboot process.

[REQ] Rogers Stock Firmware UXJJ6

UPDATE: 27/11/11
I have started a thread in the development section that contains all this information, please leave any findings or questions there, I believe members will find it more helpful there.
The thread can be found here
I have removed the file links from the OP to stop any confusion in the future. All files can be found in the other thread where it will be maintained and updated (if necessary) in the future.
Thanks for reading.
UPDATE: 27/11/11
Andrew_Low has provided a copy of his stock FROYO backup, which I tested on my tab and confirm that it is working. The kernel is rooted, other than that it is a clean ROGERS rom.
He was also able to capture the GINGERBREAD update, (which I have not tested as of yet, any testers please post your results) this is the stock update available from KIES.
Many thanks to him for this, if it helps you, hit his thank you button[/URL]. If you find this thread helpful as well, hit my thank you button.
Instructions on flashing are not provided. If you need these files it means you know how to flash your device, have flashed a custom ROM previously, and require this to return to a stock state.
Both downloads can be found in the link
downloads here
ORIGINAL POST:
I am looking for the stock firmware for a Rogers Galaxy Tab (P1000UXJJ6)
There are many posts mentioning it, even asking for it, but no firmware to be found.
If anyone has a copy of it can you please post a link here or PM me, or even if you have a backup of the original ROM (or if you can make a backup if you have the original software on your tab). Anything will do, as searching for it has not showed any results.
MODEL: P1000R
IC: 649E-SGHI987
ORIGINAL FIRMWARE:
Version: FROYO.UXJJ6
P1000UXJJ6
The SamFIT web shows
Model: P1000
Region: Rogers - Canada, (Branded: yes)
Available languages: en, fr,
October 2010 Revision: 6
Thanks in advance.
RED

Not an easy ROM to find is it?
Anybody ?

Any fresh ROGERS tabs out there???

I just picked up a used Galaxy Tab that has this firmware on it. I'm not new to hacking Android devices, but the Tab is new to me.
I haven't installed Kies yet, but will in a couple of days and can make a backup.

That would be just great, thank you very much, and I assure you that you will be glad that you made a backup for yourself as well in the future (hopefully not though, I don't expect you to have problems or anything like that but you know what I mean).
If possible, can you make the backup before you root the device, otherwise it seems to be a bit of a headache trying to get it un-rooted after the fact.
Many thanks.
EDIT: I guess i'm thinking more of a temp root than a perm root before backup

Sigh, I'm in noobville here with Kies.
Cross booted to Windows XP (I normally use Linux as my desktop) - installed Kies and sorted out USB connectivity.
I don't see where in Kies I can do a firmware backup. The backup just grabs the user data from the device.
It detects my firmware version and offers me the chance to update (which I assume would be a bad idea). Quickly looking on the net, you can 'capture' the firmware files during an update - but that doesn't help grab the version I'm running. Seems there may be a registry hack that lets you install older versions in Kies? If that's true, why can't anyone with a Rogers tab just get the old firmware easily?
Looking for a bit of hand holding.
Oh yeah, and device is bone stock. I'll likely root, unlock and install CyanogenMod - but I'm in no rush. Happy to try to help capture the stock ROM. It may help me out in the future, you never know.

Search for Roto-backup, it is a way to back it up bit by bit. It's a thread by Rotohammer, using his technique members were able to provide UN-ROOTED firmware, which are posted in the dev section. Have a little read see what you think.

The Roto-backup link was helpful, but that requires rooting.
Here's what I've done. Starting with a bone stock, factory reset device. I rooted the device using SuperOneClick 2.2. Sadly I had to run this under Windows to get it to work, mono + Ubuntu didn't seem to work out
I used the default "auto" method of rooting with SuperOneClick, and I did install busybox. In theory - if you really wanted to have an un-rooted stock, you could use the Unroot option of SuperOneClick.
Then I used the roto-backup script. This seems to have worked and I've got a 250MB zip file that I believe contains the stock firmware.
Are you brave enough to test it?
Files were zipped into a single file then split into chunks using RAR to get around upload limits. Grab them from skydrive.

Nice. I have a backup I came across but it's screwy and can't be un-rooted. The root method you used was temporary or perm?, the difference would be one disappears after a reboot.
When I originaly did my backup I used a temp root and came up with a file that I'm pretty sure was about the same size.
Brave you ask? I'm downloading the 3 RARs right now and will check it out.
Many thanks, will flash and tell you how it goes.

Well, Andrew_Low, it worked like a charm. The flash went smooth I will attempt to un-root shortly, and tell you how it went.

Glad it worked. Let me know if unroot via SuperOnClick 2.2 goes ok.
Why do you want non root? Warranty claim?
Slightly off topic, what ROM would you recommend? Seems any AT&T compatible ROM should play ok on the Rogers tab. I'm partial to CM being that's what is on my phone.
Sent from my GT-I9000 using XDA App

It is for warranty reasons, I have two tabs one was acting up. I did re stock it and sent it back but I wasn't able to un-root so I'll see if it goes through with samsung.
I HAD my stock rom that I somehow deleted (or just misplaced, cause I can't find it anywhere) Then I figured that I am not the only one who may need this, and since it is harder to find, I thought that I would try and help out the P1000R folks by getting a stock rogers rom for those who would like to revert. I was going to wait until I receive my tab back and see what they did to it and maybe have a fresh rogers rom on it to backup. I plan on posting it for members to have.
Our Rogers tabs are great for flashing anything on it really (p1000 related of course). Currently I have BOCA on mine, I had HC RC1 on it previously for a good little bit, and was going to put the ICS alpha build on it, but now since I'm left with one I use it for business purposes and require full functionality out of it. The tab that I sent back had OVERCOME KRATOS on it. Funny enough, this tab is the one that i'm always flashing different roms on and overclocking and plain old abusing it yet it was the other one that crapped out.
I recommend the OVERCOME rom as it is very stable, fast and reliable with almost no bugs. Combined with the bell modem it could also be used for phone calls if necessary. But experiment with any one you want until you find one that suits your needs, I found both my tabs hard to brick so I wouldn't worry too much if I were you. I can't wait for an ICS beta rom to stick on this one.

Cool. I'm interested in a clean stock ROM if one shows up, please post to this thread. I'll try the unroot and see if that works for me.
Open to pointers on how to soft root and capture ROM. Seems feasible, but I didn't find a way to soft root and give me enough to roto backup.
Sent from my GT-I9000 using XDA App

Looking for a clean stock ROM for Rogers as well for warranty work, thanks!

Can't folk use the 2.3 firmware from kies? I haven't tried, but if you flash the rooted UXJJ6 from this thread then use Kies to upgrade to 2.3 you'd be in an unrooted stock state.
Sent from my GT-I9000 using XDA App

theREDlegion said:
Well, Andrew_Low, it worked like a charm. The flash went smooth I will attempt to un-root shortly, and tell you how it went.
Click to expand...
Click to collapse
Hmm, very interesting. I ran the unroot on my device and it did manage to remove the superuser apk, but beyond that the device appears to still be rooted - busybox is still installed, and when I shell in over adb I get the # indicating root access.
I suspect just removing the superuser app is enough to make it appear 'as stock' - but any expert digging into the device and it's easy to see things are not stock.
If I were to try again - seems zergRush may be the local root you want to use, then from there figure out how to backup the ROM.
[edit] Ooh... reboot and adb has lost the # - I still see busybox installed in /system/xbin/busybox - I suspect this is pretty close to 'stock' if I punt the /system/xbin stuff entirely.
I'm not sure I'm that motivated to chase this further - I can't guarantee it is 100% stock, and it's the same as dl'ing the files I previously uploaded and running SuperOneClick 2.2 unroot + removing the busybox stuff as I specified above. The only mystery here is really what causes adb to have root privs when rooted.

Sweet - appears I was able to grab the ROM from Kies during the 2.3 upgrade - so I've got a copy of the clean/stock Rogers GINGERBREAD.UXKG1 firmware.
Will upload and link here in the next couple of days.

Very sweet, I will post it in the OP for reference.

pback said:
Looking for a clean stock ROM for Rogers as well for warranty work, thanks!
Click to expand...
Click to collapse
I will post the Froyo version on the first post for reference, but if you are willing to wait Andrew_Low is generously going to provide a stock rogers Gingerbread rom which I will post for you and others in the OP.

Gingerbread is here https://skydrive.live.com/redir.aspx?cid=61f79860d644cd72&resid=61F79860D644CD72!124
+1 to theREDlegion for cleaning this stuff up and making the thread useful.

(Newbie) I need help regarding getting to .901

I rooted, bootstrapped, and flashed clockwork with rom manager. I am currently running liberty3 v2.0 and I am on .886. Is it worth updating to .901? And if so how do I do it? Step by step instruction will help. Thanks

Read around. Just to give you a hint:
There is currently a thread on the first page of the "Droid Bionic General" section of this forum (same area as this thread) that has a list of step by step instructions. To give you an even bigger hint, it has NOOB in the title.

whoops! my bad.
Edit: Just checked out post. Its for .893, but is it basically the same way? In other words, could I just run R3l3AS3DRoot in order to restore to stock, update to .901 and then reinstall liberty. Also, is it worth updating? Thanks.

901 radio is flawless for me never dropped signal phone went from 5 starts to 10 stars however I am stock plan on rooting after I learn a bit mire
Sent from my DROID BIONIC using XDA App

I have no experience with 886 since my phone came with 893 pre installed. Here's my general advice.
1) Read more.
2) Get rid of Bootstrap and install Safestrap. Especially since you're a noob, this is like an insurance policy. Again, refer back to #1.
3) If you want to get to 901, my best guess would be to FXZ back to stock, and then get the OTA (over-the-air) update to 893. I've never done that, so I can't be more help. But there's definitely instructions somewhere. Let me know how that goes.
EDIT: Maybe try this post: http://forum.xda-developers.com/showthread.php?t=1408522 Disclaimer: I haven't tried it, have no idea what I'm talking about, but it looks promising.
EDIT2: Or maybe this could help? http://www.mydroidworld.com/forums/droid-bionic-forum/10577-bionic-path-saver-1-click-method.html

[Q] noob root questions...

I was hoping someone could help out, i'm a noob for sure, but i do have a LOT of linux kernel programming experience, and have been an SA for over 16 years...
anyhow, here is my issue:
I got my droid bionic on presale a few days before it came out. I rooted using a manual method found here on the forums back in beginning october, and did the root 4ever thing...After rooting, I installed liberty rom v2.0 and have been on that with no updates/mods/changes since that day in october.
MY bionic is currently on 5.5.886. I have not seen any posts about getting it to .893, or anything later for that matter. I would really like to get back into flashing new roms, testing ICS and making this thing mine again, but it has all failed...
Here is what i have tried:
went back into CWM, restored back to original post-rooted stock rom, tried to run system update=failed, all of the instructions i have found on here refer to 893 and above, and have instructions for that, but none that i could find referred to what to do if you were still on a version prior to that...
Can anyone please assist me with getting to .902/.901 so I can enjoy some ICS goodness? or at least be back on a path of better performance/more updated os?
I am willing to paypal some beer money to anyone willing to help, thanks in advance!!

I can help you man.
But I don't take donations.
You have gtalk? PM me your gtalk name.

Noob
I am also having issues. My bionic is 5.5.886. I rooted shortly after getting it, then got over eager and deleted all of the bloatware (backed-up some with Ti but Ti is hanging trying to restore). Now, I can't update.
Is it as simple as me just flashing the current version rom?

kstimp said:
I am also having issues. My bionic is 5.5.886. I rooted shortly after getting it, then got over eager and deleted all of the bloatware (backed-up some with Ti but Ti is hanging trying to restore). Now, I can't update.
Is it as simple as me just flashing the current version rom?
Click to expand...
Click to collapse
You will have to flash the 902 fxz with RSDlite 5.6