Database Develop

Nexus One ATT and the Cyanogenmod

Hi, i have the n1 with the att 3g band and i am looking to root and to install the Cyanogenmod, however i am kinda afraid to do this because i wanna make sure that the radio will still work OK after the mod.
My logic is that the Cyanogenmod was created when the n1 only existed with the t-mobile 3g band and i wanna make sure that before i do the mod that the phone will still work ok with the att 3g bands
Thank You
Alex

Yes it will work. Many people have already flashed the mod with no issues. You do not need to flash the radio since you have the newest one already, and flashing radio might get you a nice looking brick.

GuerillaZhou said:
Yes it will work. Many people have already flashed the mod with no issues. You do not need to flash the radio since you have the newest one already, and flashing radio might get you a nice looking brick.
Click to expand...
Click to collapse
thank you
what are the advantages of installing the mod on the phone, whats the differences between the stock and the Cyanogenmod?

um main thing besides all the supported root apps..
SPEED! and the ability to pretty much do anything with your device..
May the Root be with you.
-Charlie

Cyanogenmod on AT&T/Rogers Nexus One
Hi,
I just got my Nexus One today and put Amon_RA Recovery 1.6.2 on it then flashed Cyanogenmod 5.0.5.1 and it froze on the splash screen for 10 minutes. Didn't go to an animated boot screen or anything. I did a full wipe before flashing.
I am still able to get to the recovery mode... so I am glad I don't have a brick already; but I am curious how to get CM working.
I also flashed gapps-passion-EPE54B-signed.zip
Anybody else have any trouble? I am going to try a Modaco ROM before trying a stock one.

bt1980 said:
Hi,
I just got my Nexus One today and put Amon_RA Recovery 1.6.2 on it then flashed Cyanogenmod 5.0.5.1 and it froze on the splash screen for 10 minutes. Didn't go to an animated boot screen or anything. I did a full wipe before flashing.
I am still able to get to the recovery mode... so I am glad I don't have a brick already; but I am curious how to get CM working.
I also flashed gapps-passion-EPE54B-signed.zip
Anybody else have any trouble? I am going to try a Modaco ROM before trying a stock one.
Click to expand...
Click to collapse
I am having this same problem with my AT&T Nexus One. The only difference is that I used 1.7.0 of Amon_RA's recovery.

bt1980 said:
Hi,
I just got my Nexus One today and put Amon_RA Recovery 1.6.2 on it then flashed Cyanogenmod 5.0.5.1 and it froze on the splash screen for 10 minutes. Didn't go to an animated boot screen or anything. I did a full wipe before flashing.
I am still able to get to the recovery mode... so I am glad I don't have a brick already; but I am curious how to get CM working.
I also flashed gapps-passion-EPE54B-signed.zip
Anybody else have any trouble? I am going to try a Modaco ROM before trying a stock one.
Click to expand...
Click to collapse
Many people have had this problem... I had this with my TMo N1... and it has been discussed in the CM thread... but here's the quick workaround...
Wipe, flash CM 5.0.5, flash CM 5.0.5.1, flash GApps

Cyanogenmod on AT&T/Rogers Nexus One - WORKING!!
I went to Modaco here to get his kitchen of the CyanogenMod ROM:
http://android.modaco.com/content-p...nmod-5-for-nexus-one-online-kitchen/page/560/
I just grabbed the pre-baked file.
I flashed Amon_RA 1.7.0 beforehand.
Wiped everything
Flashed CM 5.0.5.1 from Modaco
Wiped again
Fix APK UID
Reboot
Working!

Good to know, I was wondering that.
My Nexus one is in the mail right now
Can't wait!
N1 arrives -> gets warm -> gets charged -> gets Amon_RA =)

labbbby said:
Good to know, I was wondering that.
My Nexus one is in the mail right now
Can't wait!
N1 arrives -> gets warm -> gets charged -> gets Amon_RA =)
Click to expand...
Click to collapse
It will arrive with 25% battery. just plug it into your computer to charge it and skip from...N1 arrives->gets Amon_RA =)

Can some one guide me to a good stable rom.

Hi guys i am looking for a good rom for my htc hero for some reason all the rom i got they all loop.is there atlease one thats working fine????

CM6 STABLE
Root-Hack-Mod-Always™

Are you fully wiping your phone (data and Dalvik) in recovery before flashing any of these new ROMs? If not, that's probably why they are all looping for you. You need to completely wipe your phone before you flash any new ROM.
Also, if you are flashing any ROMs that have an overclocked default kernel in them, it could be possible that your phone can't boot at OC speeds which also causes it to bootloop.

xconpr said:
Hi guys i am looking for a good rom for my htc hero for some reason all the rom i got they all loop.is there atlease one thats working fine????
Click to expand...
Click to collapse
Are you wiping before loading new roms? If you load - say Fresh 2.4 for example - and you're getting boot loops with it - are you wiping before you try to install a rom like CM6?
and the second post is definitely right on - CM6 is excellent -

[Q] Boot Loop when installing ROM

Hey guys; i'll try to provide you with all the information but honestly i'm not 100% on all of it so try and be patient.
I'm trying to go back to SuperE from Froyo by Laszlo which was absolutely killing my battery without me even using it. However, every time i flash it (and i wipe everything) after it goes past the G1 screen it just resets again.
I'm not sure if this is maybe because of the new kernel (2708) which i'm PRETTY sure i have, but am not 100%. I do know that i have one of the new radios though.
Would the kernel be causing the problem? If so how do i downgrade?
I hope you can help me out!
Thank you!

Q: Can you mention step-by-step what did you flash? And confirm the exact setup before flashing. I believe you mentioned your radio is 2708.
Powered by Android

Thank you for replying. I'll definitely try.
I'm back on FroyoByLaszlo-int2.1 because i couldn't successfully flash either Super D or Super E.
My Radio is 2.22.28.25
Kernel version says 2.6.35.10 - froyobylaszlo
Basically i did what i always do. I wiped everything, first by flashing the "all-wipe" and then going back and wiping it all manually.
Then i flashed the appropriate gapps, followed by the ROM. Rebooted afterwards, but every time it gets passed the G1 screen it reboots.
The only thing i can think of is incompatibility with the kernel but then again, i don't know crap, so that's why i'm asking

Yep, most likely it is indeed the incompatibility of the kernel with the radio.
I'd try flashing the ezBiffTestKernel20101106-2708.zip after the ROM+GApps.
Just use Google to find the kernel.
Powered by Android

The battery drain could be becos of the new kernel. Try installing the 35.9 kernel from ezterry (the one he had for CyanogenMod 6.1 2708) It is working good for me, the battery last for a whole day.

[Q] Need help with CyanogenMod 9

I finally rooted my Nexus one recently. And I wanted to flash the unofficial cyanogen mod 9 ics to my phone. Because I needed a larger Hboot partition I flashed an ICS hboot (http://forum.xda-developers.com/showthread.php?t=1637166) . I then flashed the rom i wanted and all looked okay. But i booted my phone up and now it just freezes on the boot animation? someone please help me, this is driving me crazy...

moose.splash1 said:
I finally rooted my Nexus one recently. And I wanted to flash the unofficial cyanogen mod 9 ics to my phone. Because I needed a larger Hboot partition I flashed an ICS hboot (http://forum.xda-developers.com/showthread.php?t=1637166) . I then flashed the rom i wanted and all looked okay. But i booted my phone up and now it just freezes on the boot animation? someone please help me, this is driving me crazy...
Click to expand...
Click to collapse
Stupid question, but did you do a factory reset after installation?

Try the proccess again, something bad may have happened during your flash.

[Q] Custom ROMs dont work

Hello guys,
my friend has a Galaxy S Advanced GT-9070, and he had really bad stock ROM which came built in with the phone,
and i wanted to upgrade his ROM for MIUI or whatever..
So I flashed him CWM and tried some ROMs.
The ROMs flashed properly, but the phone got stuck on the boot logo each time I tried to turn it on.
I did wait a long time, about 2 hours, and I do have experience (successful one) with flashing ROMs on other phones.
Do you have any idea what the problem could be?
Any kind of help will be appreciated. :good: :good:

Give more details.
What CWM, what ROM'S do you flashed, did you wipe all with a clean flash?
Powered by CM11 - M6 snapshot

Berlovich4 said:
Hello guys,
my friend has a Galaxy S Advanced GT-9070, and he had really bad stock ROM which came built in with the phone,
and i wanted to upgrade his ROM for MIUI or whatever..
So I flashed him CWM and tried some ROMs.
The ROMs flashed properly, but the phone got stuck on the boot logo each time I tried to turn it on.
I did wait a long time, about 2 hours, and I do have experience (successful one) with flashing ROMs on other phones.
Do you have any idea what the problem could be?
Any kind of help will be appreciated. :good: :good:
Click to expand...
Click to collapse
You did factory reset? And bad stock rom was? JB or GB? You can't flash JB+ ROMs over GB.

Had the same problem for months due to faulty sd card. Try a different one.
Sent from my GT-I9070 using XDA Free mobile app