[Q] recovery of mda wizard G3 cid lock - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have a problem after flashing to my screen appears only T-mobile with the IPL and SPL data is that T-Mobile MDA wizard Charles Lock CID do not know what I do
after a hard reset outputs
Patricion Fail
may need to be corrected, then FAT table should go to load ROM.
please Consult
SLOVENSKY
mam problém po flashovaní sa mi objavi iba obrazovka T-mobile s IPL a SPL udajmi je to T-mobile mda wizard UK CID Lock neviem co mam robit
po HARD RESETE vypiše
Patricion Fail
zrejme bude treba opraviť FAT tabulku potom by mala ist nahrať ROM.
poradte prosim

Related

Mda Vario upgrade Room. Big problem....

Hello to all. I have a great problem.
I want to install an Italian ROOM in my VARIO MDA (room version 2.21.2.0 ger). I have used Lokiwiz in order to unblock the CID but now when I install new ROOM appears error 300.
Perhaps there is an error when I release the CID. In fact in window DOS of Lokiwiz it appears “Error: ITwriteDisc - si è verificato un errore interno"
Please help me!!!! :?
lokiwix 0.2x does not work anymore with spl 2.x roms. i to have the same problem, but it is impossible to cid unlock spl 2.x phones (unless it is below 2.21). in your case, the only way to change the language is to follow the following post / guide (as did i). you can use lokiwiz 0.3a to simunlock you phone.
http://forum.xda-developers.com/viewtopic.php?t=56088
or go to http://www.imei-check.co.uk/

anyway to unlock my vario

hi to all, I need help to unlock my vario from t-mobile Germany.
I have read to much but I did not find any way to unlock sim and cid.
mda vario
IPL 1.03
SPL 2.21
rom 2.21.2.8
03.09.2006
many thanks guyes
mosobhy said:
hi to all, I need help to unlock my vario from t-mobile Germany.
I have read to much but I did not find any way to unlock sim and cid.
mda vario
IPL 1.03
SPL 2.21
rom 2.21.2.8
03.09.2006
many thanks guyes
Click to expand...
Click to collapse
IPL 1.03 and SPL 2.21 ?!?
Hhhmmmm....how did you do that? As far as I know those two has to be THE SAME, otherwise you'll get an unstable device and can brick it easily!
And please (!!!!!) read the forum....there are tons of threads on how to unlock SIM and CID, so I guess you still did not read to much.
Molski
I believe what are you said. but i just got it today from T-mobile as replacement.
Upgrade to the latest 2.26.10.2 T-Mobile Rom, you can find it on this forum.
I believe if you do that then everything will be okay for your device.
I hope they don't gave you a "refurbished" device.
I had upgrade to rom 2.21.2.8 GER. so I got the following
IPL 2.21
SPL 2.21
rom 2.21
than I unloked sim with Lokiwiz03a.
so anyway to unlock cid that I can upgrade to other network without resk
many thanks

Mda Vario bad reception

Hi,
I have Mda Vario which has very bad reception ( have had some Varios before, never encountered this problem). Is it possible to upgrade radio ROM in spite of the fact this is G4 phone?
Thanks for help..
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.21.2.6

need some help about upgrading wizard.....

hello i'm newbie on pda...
i have a problem about upgrading my mda vario(T-mobile Netherland),i have tried all de way which write on wiki n all threads about upgrading wizard on dis forum,but i still get "ERROR:INVALID VENDER ID"
i've got IPL 1.05(i already flash xda_miniS_launchROM)
SPL 2.21
n i already CIDunlocked(even at the bottom of de CIDunlocked process,an error says that "cannot copy unlocked.bin to tffs",but there is says succed CIDunlock my device)
actually i juz want to change de dutch to english...
thanx before
Look for the WST tool from Mistrini (the thread is on this same usb-forum!) to help you checking about the status of your Wizard (e.g. whether it is really CID unlocked etc.) and be sure to understand and to follow the steps in the tutorials ...
Good luck!

upgrade MDA G3 Wizard lukt niet

Ik heb een MDA Wizard G3, met ipl/spl 1.06, OS 1.6.2.2. Volgens de wizard service tool is ie al cid unlocked. Wanneer ik probeer de rom te upgraden lukt dat niet met een officiele T-mobile upgrade, maar ook niet met de button rom. De foutmelding die ik krijg is 'error(260) update error. Wat doe ik verkeerd?
barry2008 said:
Ik heb een MDA Wizard G3, met ipl/spl 1.06, OS 1.6.2.2. Volgens de wizard service tool is ie al cid unlocked. Wanneer ik probeer de rom te upgraden lukt dat niet met een officiele T-mobile upgrade, maar ook niet met de button rom. De foutmelding die ik krijg is 'error(260) update error. Wat doe ik verkeerd?
Click to expand...
Click to collapse
Have you noticed that the forum's interface language is English? Maybe it's for a reason
If you want to increase the chance of an answer better write in English, else you'll only get answers from dutch (or whatever is the the language you wrote)
cheers
****, what a loony I am. (so sorry) My point is I cannot upgrade my G3 wizard that appears to be cid unlocked. (as shown by Wizard Service Tool)
It has ipl/spl 1.06, OS 1.6.2.2 running and I connect to the device with Active Sync 4.5. I get update errors like 260 when I trie to update official T-Mobile rom or Button rom. Upgrade from bootloader screen doesn't work either. What massive mistake am I making here?
Reset (Soft reset or Hard reset) your phone. Confirm connectivity via usb,check if small usb appears at the bottom of the Bootloaders mode when connected via usb cable,if its there than it shud flash,otherwise,there's a connection problem,it might be usb cable or mini usb port of the phone.
Its already IPL/SPL 1.xx,there's no need to flash Button's Rom,if WST tool confirms its CID unlocked,than upgrade to 2.xx by flashing T-mobile 2.26.After that you can upgrade to any wm6 or 6.1 rom,but if its still CID locked,then use lokiwiz02b for CID unlocking it first.
Post WST results here.
Be sure to have a FULL (or almost) battery before trying the upgrade as connection errors can come from low voltage.
Think you were right there. After a couple of hours patience (=loading battery) things went fine.
hi every body I need some one can give me a method to upgrade my I-mate k-jam G3 wizard to any windows because I tried all steps in this web site to upgrade my device but I let-down.........please help me guys because mybe I will through my device in the rubbish

Categories

Resources