Mda Vario upgrade Room. Big problem.... - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello to all. I have a great problem.
I want to install an Italian ROOM in my VARIO MDA (room version 2.21.2.0 ger). I have used Lokiwiz in order to unblock the CID but now when I install new ROOM appears error 300.
Perhaps there is an error when I release the CID. In fact in window DOS of Lokiwiz it appears “Error: ITwriteDisc - si è verificato un errore interno"
Please help me!!!! :?

lokiwix 0.2x does not work anymore with spl 2.x roms. i to have the same problem, but it is impossible to cid unlock spl 2.x phones (unless it is below 2.21). in your case, the only way to change the language is to follow the following post / guide (as did i). you can use lokiwiz 0.3a to simunlock you phone.
http://forum.xda-developers.com/viewtopic.php?t=56088

or go to http://www.imei-check.co.uk/

Related

HELP ME PLEASE!

I've QTEK 9100 SPV M3000
version IPL 1.03
SPL1.03
GSM1.4.10
OS1.3.1.4
I try to change FRENCH to ENGLISH ROM using this rom:RUU_Pridigy_1060701_101_11310_QTEK_WWE_Ship.exe
But I recieve this ERROR [294] : INVALID VENDER ID message.
(One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.)
Can somebody please help me upgrade my qtek 9100
You need tyo clear the CID lock.
Find the aWizard tools on the forum, read an execute the indicated steps (unlock CID and make a backup.
Then run the upgrade again.
Works very wel (at least on my dutch MDA vario)

:?: Vodafone -> Cingular: Error 294

Hi,
I have a Vodafone VPA Compact II (HTC Wizard) in German.
I will relocate to USA and I want to update my phone OS etc. into English (Cingular ROM).
I know that I have to first unlock my phone and I used both Lokiwiz02b and aWizard 1.3 beta 2 in order to unlock my phone. And these programs let me know that my phone is unlocked.
"Your phone is now unlocked...."
I have tried both "U. Unlock" and "C. CID Unlock (SuperCID)".
Than I have tried to install Cingular ROM "RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe" but I still get error msg 294.
Than I tried other Cingular file "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" and it was installed without any problem. But I have still German in my phone. As I understand this file installs only Extended ROM of Cingular.
Now I need to install an English ROM and when possible a Cingular one.
Any tip?
:?:
I have found a solution.
Lokiwiz02b does not work for AKU2 ROMs. I've just downgraded my ROM into an older version and than applied Lokiwiz02b CID unlock with success.
Than I upgraded my ROM into new Cingular 8125 one and works great!
help on Cingular 8125
Hello Web dev90,
Could you please tell me more about the way you upgrade your Cingular 8125 to English ,how to down grade ROM?
Thanks very much

Help ROM CID unlock

Hi,
My boss has just bought a Wizard branded as a Grundig GR660 by Movistar, and he wants it in English, I've read all about the bootloader problem with 2.21.0001, it has Rom version 2.22.5.2ESN. If I try the downgrade i get a error 300 message.
Is there ANY way i can change the language to English????
Cheers!!!!
I have the same G4 device as well, there is no need for CID unlock to upgrade the phone to 2.xx rom (any languages) version. However, you might need to sim unlock the phone using Lokiwiz03a though. In order to upgrade the ROM, just follow this instrution: http://forum.xda-developers.com/viewtopic.php?t=56088
Alternatively, you could try my new cooked Rom Wizard_Love 2.26 (worldwide English version) which is for G4 device : ftp://xda:[email protected]/Uploads/Wizard/Roms/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
Thankyou very much, worked a treat!!!!!!! 8) 8) 8)

MDA vario T-Mobile CID and ROM

Hi everyone,this is my first tread and I hope someone can help me.
I've just bought a T-Mobile MDA VARIO in USA that is Unlock,because it read me differens SIMs with no problem, but I want to know if is also CID - unlocked because I want to put in, afterwards, the ROM with the italian language.
What I have to do to look if is CID locked or not?
thank you for your time
Mick
mickscores said:
Hi everyone,this is my first tread and I hope someone can help me.
I've just bought a T-Mobile MDA VARIO in USA that is Unlock,because it read me differens SIMs with no problem, but I want to know if is also CID - unlocked because I want to put in, afterwards, the ROM with the italian language.
What I have to do to look if is CID locked or not?
thank you for your time
Mick
Click to expand...
Click to collapse
Ciao,
this is what you have to do:
1) Check whether your phone is G3 or G4 (reset and look at IPL/SPL version: 2.xx.0001->G4; 2.xx->G3)
2) If it is G4: you cannot CID unlock it. To install a different rom, then, you must follow this tutorial: http://forum.xda-developers.com/showthread.php?t=271043
3) If it is G3 AND rom version is >= 2.21 (equal or greater than 2.21): cannot be CID unlocked, use the same tutorial as for G4.
4) If it is G3 AND rom version is < 2.21 (minor than 2.21): follow this thread http://forum.xda-developers.com/showthread.php?t=263116 to learn how to downgrade the rom and CID unlock the phone.
bye
MDA ROM Questions
Thank you, Risidoro, for the excellent advice.
I have a couple of follow-up questions:
Background: My T-Mo (USA) MDA has SPL/IPL 2.26, OS 2.26.10.2 (determined as per your advice). I'd like to install a different "unrestricted" ROM (mainly to get access to JAVA and to impove performance).
Here are the questions:
1. The current ROM (2.26) is not the original software of my MDA: it's the official update released by T-Mo a couple of months ago (I installed it myself). I don't know by now what was the orginal version. It was probably a much earlier version, perhaps 1.17. So, my first question is: does it matter what the original version was, or it only matters what the current version is? Can I fry the phone if I follow your advice for case 3?
2. T-Mo unlocked the phone for me (they do it for its customers after a while). However, I don't know if it's been both SIM-unlocked and CID-unlocked; or just SIM-unlocked. How do I find out? I did run lokiwiz on it (just in case) but I have no idea if it succeded.
3. After running lokiwiz, I tried to install QTek 9100 ROM with push mail, shipping (I found it on the web, and it claimed to be for a shipping QTeck; so, I thought it's a pretty safe ROM). It states that its version is 2.17.7.102. However, the installation failed: it got to the three-colored screen and stopped there. The device is OK though (after soft reset), just runs the previous software 2.26. What does it tell us? And does it make sense at all to "upgrade" to a lower version just to get an unlocked JAVA-running device? Or you'd recommend a different ROM (which one?)?
Many thanks,
LKMDA
risidoro said:
Ciao,
this is what you have to do:
1) Check whether your phone is G3 or G4 (reset and look at IPL/SPL version: 2.xx.0001->G4; 2.xx->G3)
2) If it is G4: you cannot CID unlock it. To install a different rom, then, you must follow this tutorial: http://forum.xda-developers.com/showthread.php?t=271043
3) If it is G3 AND rom version is >= 2.21 (equal or greater than 2.21): cannot be CID unlocked, use the same tutorial as for G4.
4) If it is G3 AND rom version is < 2.21 (minor than 2.21): follow this thread http://forum.xda-developers.com/showthread.php?t=263116 to learn how to downgrade the rom and CID unlock the phone.
bye
Click to expand...
Click to collapse
For your point 3:
Does the problem appears after I upgrade the ROM version to 2.26 (t-mobile)?
Current version is 1.7.13
can the G4 be unlock through - http://www.imei-check.co.uk/ ?
uccoffee said:
can the G4 be unlock through - http://www.imei-check.co.uk/ ?
Click to expand...
Click to collapse
Some have reported that they have used IMEI with the G4 successfully.
--M

need some help about upgrading wizard.....

hello i'm newbie on pda...
i have a problem about upgrading my mda vario(T-mobile Netherland),i have tried all de way which write on wiki n all threads about upgrading wizard on dis forum,but i still get "ERROR:INVALID VENDER ID"
i've got IPL 1.05(i already flash xda_miniS_launchROM)
SPL 2.21
n i already CIDunlocked(even at the bottom of de CIDunlocked process,an error says that "cannot copy unlocked.bin to tffs",but there is says succed CIDunlock my device)
actually i juz want to change de dutch to english...
thanx before
Look for the WST tool from Mistrini (the thread is on this same usb-forum!) to help you checking about the status of your Wizard (e.g. whether it is really CID unlocked etc.) and be sure to understand and to follow the steps in the tutorials ...
Good luck!

Categories

Resources