Database Develop

PLEASE HELP???

I Just upgraded to the new push ROM on my QTEK 9100, its very stable im so happy with.
now i need to send my qtek to repair, but they will not honor the warranty if they recieve it with the TEST TOM 2.8.
I Tried to flush it back to the orginal ROM i failed " ERROR NEW NBF FILE REQUIRED"
ANY HELP WILL BE APPRECIATED
thanks

You need to use aWizard to CID unlock, and then restore the old ROM. See the aWizard thread.

i thought CID only for the K-JAM NOT FOR MY qtek 9100

Nope, I had to use aWizard to CID unlock my Qtek 9100 to go back from the 2.8 rom to the original 1.1 shipping rom in order to edit the extended rom.

HBERBOUT123 said:
i thought CID only for the K-JAM NOT FOR MY qtek 9100[/quote
Thank you so much you are DA MAN , after many attemp i keep getting this error
"The system cannot find the path specified"
i dont know what happen on my 20th attemp the cid unlocked
thanks again.
BY any chance you know i was getting this error
The system cannot find the path specified
Click to expand...
Click to collapse

Can't put I-Mate rom into unlocked QTEK9100 - Invalid Vender

Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance

The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.

still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance

I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area

tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...

Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.

Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again

I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.

change from Danish to English/Swedish

i have tried to change from Danish to english or swedish on my Qtek 9100..
i have tried to unlock it
i have tried to remove CID
but i still get the message ERROR 300 and that i understand is that is some problem with RUU.
Can someone help me
BR
Markus

Check if your unit if G3 of G4 (Refer to the Wiki)

A Problem with upgrading rom

I downloaded the WM6 rom of HTC Herald from Thai website and tried to upgrade my Dopod C800's rom.But I faced a problem that "error invalid vender id".So I would like to know that how could I fix this problem,please.!!!
Thanks for your help.

Invalid vender ID
I got the same as yours. I'm THAI but working in CHINA so, I bought Dopod S1 (same model as Touch). THe OS is CHN so I also want to change the OS to ENG. After reading some advices in this web, I install the CID unlock and following with the RUU WWE (Dopod asia) and it turns out the "invalid vender ID".
Sill don't know how to do.

Does pdaviet rom CID lock the device?

Hi
I have an unbranded german herald and used to flash offical RUUs in german and english without any problems. Today I flashed the latest pdaviet touchflo rom. Because I didn't like it I tried to reflashed the WWE RUU. But this time I got the "invalid vendor id" message. I flashed with the german RUU - no problem. I tried again to flash the englich RUU -> "invalid vendor id" !?!?
My CID unlocked herald now seems to be a CID locked herald - is this possible ?
I found several msgs about the "invalid vendor id" with pdaviet (unfortunately after I flashed my device) but I didn't find any msgs about a CID lock.
Thanks !

you can only ruu with an ruu of the language that your herald came in.
and for the record, aserg's method doesn't actually cid unlock

Hi,
Mine is a Dopod C800 from HK, originally it was English, now it's bricked after USPL-beta3.
It shows IPL 1.9.0001, SPL 4.10.0000. Tried all the RUU versions (different lang) I could download, it takes NONE. Invalid vendor ID, or Error [226] flash write error.
So what vendor it is locked now to?
Thanks for any answers.

Hi,
but I was able to use the english RUU on my german herald before I flashed pdaviet. And now it is not possible again. This really make me wonder. Now I have to use the german RUU but I liked an english rom much better...