I've QTEK 9100 SPV M3000
version IPL 1.03
SPL1.03
GSM1.4.10
OS1.3.1.4
I try to change FRENCH to ENGLISH ROM using this rom:RUU_Pridigy_1060701_101_11310_QTEK_WWE_Ship.exe
But I recieve this ERROR [294] : INVALID VENDER ID message.
(One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.)
Can somebody please help me upgrade my qtek 9100
You need tyo clear the CID lock.
Find the aWizard tools on the forum, read an execute the indicated steps (unlock CID and make a backup.
Then run the upgrade again.
Works very wel (at least on my dutch MDA vario)
Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
Hi,
I have a Vodafone VPA Compact II (HTC Wizard) in German.
I will relocate to USA and I want to update my phone OS etc. into English (Cingular ROM).
I know that I have to first unlock my phone and I used both Lokiwiz02b and aWizard 1.3 beta 2 in order to unlock my phone. And these programs let me know that my phone is unlocked.
"Your phone is now unlocked...."
I have tried both "U. Unlock" and "C. CID Unlock (SuperCID)".
Than I have tried to install Cingular ROM "RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe" but I still get error msg 294.
Than I tried other Cingular file "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" and it was installed without any problem. But I have still German in my phone. As I understand this file installs only Extended ROM of Cingular.
Now I need to install an English ROM and when possible a Cingular one.
Any tip?
:?:
I have found a solution.
Lokiwiz02b does not work for AKU2 ROMs. I've just downgraded my ROM into an older version and than applied Lokiwiz02b CID unlock with success.
Than I upgraded my ROM into new Cingular 8125 one and works great!
help on Cingular 8125
Hello Web dev90,
Could you please tell me more about the way you upgrade your Cingular 8125 to English ,how to down grade ROM?
Thanks very much
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck