hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck
Related
Hello!
I wan't to totally get rid off the T-Mobile branding and so I decided flashing the original qtek rom ver. 2.18 GER. I used awizard to unlock cid, backup roms and afterwards tried to flash the QTEK rom. Now the program throwed error 296 "upgrade only". I read several posts in the forum describing how to do a downgrade and downloaded the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe which I tried to flash to the phone before upgrading to qtek ROM. But when I try to flash the custom rom the updater gives me "ERROR 300":this ROM cannot be used with your phone.
Does anyone have a solution for this?
TIA.
okay... I read a bit more and seems that there is currently no possibility to flash another rom into my phone with version 2.21 without turning it into a brick, right? so I think I will better keep the TMO software until anyone finds a possibility to do an up- or downgrade on this...
If your IPL and SPL were 2.xx, then you can upgrade your ROM to any 2.xx Wizard rom by following this instruction: http://forum.xda-developers.com/viewtopic.php?t=56088
Alternatively, you could install my cooked rom Wizard_Love 2.26 (it is safe, because it doesn't contain IPL and SPL part) which is a operator-independent ROM.
thx wlove!
so just to clarify that I understand it right- with this tutorial I WILL be able to flash the ver. 2.18 of the QTEK rom to my IPL/SPL ver. 2.21 phone?
Yes, just follow the instruction carefully, then you will definitely get it done (not just for 2.18 version, but for all the higher rom version as well). I have done it over and over again using this method without any problem. This method is safe, because it doesn't your touch the IPL and SPL part, even if your computer was power off in middle of flashing, you'll still be able to flash it again, your phone is not death yet. However, remember do a full charge of your battery before upgrading your ROM. Good luck.
thank you! I was finally able to flash my phone with an unbranded rom version!
Nice, enjoy your new ROM.
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2
Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.
Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol
I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas
You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp
Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario
imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry
Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.
thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry
sorry if i ask vry stupid question because I'm new and can someone help me
i need a new soft or ROM vich can make my device ENGLISH and not rusian.
only what i need is to change a lenguage. i need ENGLISH language
plz plz plz heeelp!!!!
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
starkwong said:
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
Click to expand...
Click to collapse
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
You DID NOT CID unlock your device.
siemensfun1 said:
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
Click to expand...
Click to collapse
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
zabardast_1 said:
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
Click to expand...
Click to collapse
ok thanks!!! i'll try to upgrade my device tonight.
thanks all who try to help me.
sorry about my English.
i,ll try to update but language is still russian an ROM is still same.
I download thes file: RUU_NoID.exe, then i download an oficial ROM, then i replace the original ROM's RUU with RUU_NoID. operation begin, but after and of this nothing change.
ha can i change language for English? can anyone help me an give me a links of this files vich i can use???
my IPL/SPL is 2.16 and i think it is G3???
plz today i must do this i need help!!!
XDA-developers plz help me!!!
Well,I'll suggest you go for the second option,unlock your phone and upgrade to any latest wm6 custom build Roms.Once you get your phone unlocked,it stays unlocked and gives you the opportunity to keep on upgrading to the latest Roms and features.Read the stickies on unlocking and upgrading and do it correctly,I'm sure you'll have much more benefits and enjoyment.
Cheers !
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
siemensfun1 said:
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
Click to expand...
Click to collapse
ok,grrrrrr8,if you have managed to downgrade to ipl/spl 1.xx,its time to SIM/CID unlock the phone,read the 'definitive guide for unlocking by Dr.Puttingham and download the lokiwiz-2b tool and do the method exactly as stated in the guide to Sim/CID unlock your phone,after successful unlock upgrade to ipl/spl 2.xx by downloading and flashing T-mobile 2.26 to the phone,only then you can upgrade to any latest wm6 rom,as its required to have CID unlocked phone and ipl/spl 2.xx for upgrade to wm6.
Good luck
& 1 question again.
if i uogarde my device with T-mobile ROM 2.26 and want to upgrade again to WM6 i must unlock CID again??? or i can upgrade ROM without it???
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter