Hello!
I wan't to totally get rid off the T-Mobile branding and so I decided flashing the original qtek rom ver. 2.18 GER. I used awizard to unlock cid, backup roms and afterwards tried to flash the QTEK rom. Now the program throwed error 296 "upgrade only". I read several posts in the forum describing how to do a downgrade and downloaded the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe which I tried to flash to the phone before upgrading to qtek ROM. But when I try to flash the custom rom the updater gives me "ERROR 300":this ROM cannot be used with your phone.
Does anyone have a solution for this?
TIA.
okay... I read a bit more and seems that there is currently no possibility to flash another rom into my phone with version 2.21 without turning it into a brick, right? so I think I will better keep the TMO software until anyone finds a possibility to do an up- or downgrade on this...
If your IPL and SPL were 2.xx, then you can upgrade your ROM to any 2.xx Wizard rom by following this instruction: http://forum.xda-developers.com/viewtopic.php?t=56088
Alternatively, you could install my cooked rom Wizard_Love 2.26 (it is safe, because it doesn't contain IPL and SPL part) which is a operator-independent ROM.
thx wlove!
so just to clarify that I understand it right- with this tutorial I WILL be able to flash the ver. 2.18 of the QTEK rom to my IPL/SPL ver. 2.21 phone?
Yes, just follow the instruction carefully, then you will definitely get it done (not just for 2.18 version, but for all the higher rom version as well). I have done it over and over again using this method without any problem. This method is safe, because it doesn't your touch the IPL and SPL part, even if your computer was power off in middle of flashing, you'll still be able to flash it again, your phone is not death yet. However, remember do a full charge of your battery before upgrading your ROM. Good luck.
thank you! I was finally able to flash my phone with an unbranded rom version!
Nice, enjoy your new ROM.
Related
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
hi...
i am a little noob when it comes to rom upgrading. so, i apologise if this is a stupid question. i flashed my wizard with wizard love rom. the ipl and spl both show 1.01 and os 2.26.10.2..but, no gsm.also, my phone doesn't catch signals.now, if i need to flash a radio rom, which radio rom should i flash, and is there any risk of bricking my device ??
thanks..
puja
There's very little risk (I'm definitely not going to say there's none because you always take some risk when flashing) with flashing a radio ROM. I kind of curious though, most people only flash the wizard love ROM so they can CID unlock before going on to flashing other ROM's such as a WM6 version. Are you planning on keeping the wizard love ROM as your OS? Which radio ROM you decide to flash kind of depends on where are and what ROM you're using. 2.19.11 seems to be the most popular one to flash though. Check the wizard wiki if you need to download it.
Basically flasing Radio ROM will not brick the device, and it also does not require CID unlocking.
Beside 2.19.11, 2.47.11 and 2.69.11 Radio ROM are also popular.
If you have unlocked your device after downgrading IPL and SPL, just get a 3.08 IPL/SPL upgrade package and you will get all IPL/SPL/Radio ROM upgraded to the most current version.
p.s. You now have IPL/SPL 1.01 that is too old and should be upgraded (Instead you MUST upgrade to at least 2.xx if you plan to use WM6)
i was earlier having ipl n spl 2.xx..but i wanted to unlock my device.so, i downgraded to button's 1.05 rom..but i couldn't unlock it (See my post in the topic 'The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards'), after which i decided to simply flash the love rom...
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
edit. sorry
starkwong said:
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
Click to expand...
Click to collapse
when i run 'lokiwiz.bat' as instructed, it says 'your phone is now unlocked', but my device doesn't reboot..u may read my post in ''The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards"..is there any way to check if my phone is unlocked or not ???
Search for and download wizard service tool. It has a button on it that you can press and it will tell you if you're unlocked or not.
I'll save you the searching since about 10 seconds after I wrote that last post I saw the wizard service tool thread. It's here - http://forum.xda-developers.com/showthread.php?t=295038
I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2
Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.
Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol
I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas
You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp
Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario
imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry
Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.
thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck
ok guys i f***** up my mda gets stuck at second splash screen the one that tells you ipl/spl and stuff
i was flashing a new rom using a prog called shelltool which i got from here as my device isnt cid unlocked i was using this rom
http://forum.xda-developers.com/showthread.php?t=403096
dunno whats happened but now its stuck and cant seem to get it sorted here are some details
ipl 3.08
spl 3.08
gsm 02.69.11
os 2.18.0.0
i have tried using a rom update utility but doesnt work, please help
You can always flash back to your MDA stock ROM.
After flashing back, flash to Button's ROM to downgrade your IPL and SPL and unlock your CID. However due to your IPL and SPL is at 3.08, there is a possibility that you can downgrade IPL to 1.01, however SPL stays at 3.08. In that case, try unlock CID using Wizard Service Tool (Actually you can also use WST if both IPL and SPL version are 1.01).
Note: Never use ShellTool ever. There are methods now that use RUU to flash your favorite ROM, both for G3 and G4. You should use those methods instead.
the same thing happened to me when I was very hesitant on cid unlocking my 838 . I use shelltool in flashing and was successful but when i decided to give another shot on a different cooked rom, it certainly did its job on flashing but never got pass on the IPL SPL screen.
then I follow Dr. P's guide (CID unlocking) then I successfully resurrected my 838 and now I can flash whatever cooked rom I want (given that it is for a G3 device)
btw, after flashing my 838 with the buttons rom, I use WST instead of lokiwiz
HTHs
thanks
thanks for your help guys got it sorted and cid unlocked now
just need a really good rom now
and the hunting begins
good to hear that try to look for a rom that will suit your needs. There is a lot of good roms here, just try to search what best fit you.
like I did, i have flashed at least 5 different roms in just a months time