Downgrade Locked G3 with 3.08 IPL/SPL - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2

Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.

Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol

I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas

You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp

Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario

imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry

Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.

thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry

Related

Downgradeing HTC Wizard

Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE

Some help please

I am pulling my hair out here...
I have an 8125, with the following
Sim Carrier and Rom = T-Mobile
IPL/SPL=3.08
GSM=01.12.10
OS=1.5.4.2
Rom Version=1.5.4.2 WWE
Radio Version 01.12.10
I followed the two main tutorials on how to SIM and CID unlock, got both my IPL and SPL to match, flashed in the TMo Rom and thought all was good.
Now I was poking around and see that it is not a 2.26 rom that is on there but it is a 1.5.4.2. So what do I do, I go to
http://www.t-mobile.com/wmupgrade/
to get the Mobile MDA Software Version (2.26.10.2)
and when I run the file that gets downloaded, it gives me a
ERROR [296] : UPGRADE ONLY
Now, does it see that the phone is infact not an MDA and is a 8125 and does not like it?
So now from this point, (I have done my research and forum search, and RTFM many times so pleae dont blast me) what do I need to do to get the updated 2.26 rom, and eventually get up to the WM6.
I appreciate all the help, as I am seriously ready to have phone meet wall.
177media said:
I am pulling my hair out here...
I have an 8125, with the following
Sim Carrier and Rom = T-Mobile
IPL/SPL=3.08
GSM=01.12.10
OS=1.5.4.2
Rom Version=1.5.4.2 WWE
Radio Version 01.12.10
I followed the two main tutorials on how to SIM and CID unlock, got both my IPL and SPL to match, flashed in the TMo Rom and thought all was good.
Now I was poking around and see that it is not a 2.26 rom that is on there but it is a 1.5.4.2. So what do I do, I go to
http://www.t-mobile.com/wmupgrade/
to get the Mobile MDA Software Version (2.26.10.2)
and when I run the file that gets downloaded, it gives me a
ERROR [296] : UPGRADE ONLY
Now, does it see that the phone is infact not an MDA and is a 8125 and does not like it?
So now from this point, (I have done my research and forum search, and RTFM many times so pleae dont blast me) what do I need to do to get the updated 2.26 rom, and eventually get up to the WM6.
I appreciate all the help, as I am seriously ready to have phone meet wall.
Click to expand...
Click to collapse
You have already flashed newer bootloaders that 2.26. You have 3.08. Why do you need to go back to 2.26? IF you are CID unlocked (did you take your bootloaders down to 1.xx then run lokiwiz, and then bring them up to 3.08?) you should be able to flash your WM6 rom now. Have you tried?
Zzan said:
You have already flashed newer bootloaders that 2.26. You have 3.08. Why do you need to go back to 2.26? IF you are CID unlocked (did you take your bootloaders down to 1.xx then run lokiwiz, and then bring them up to 3.08?) you should be able to flash your WM6 rom now. Have you tried?
Click to expand...
Click to collapse
I think he upgraded the IPL/SPL alone from button's 1.01 and now can't flash any ROM since 3.08 can't handle 1.5 OS.
My advise is to flash IPL/SPL 1.01 and from there flash a 2.26 but... there are a lot of people mentioning IPL 3.08 and SPL 1.xx meaning that IPL won't allow to downgrade. I think it's up to him...
my understanding is that you shouldn't be going to an ipl/spl of 3.xx unless you are flashing from an ipl/spl of 2.xx. (based on thread information from old roms of molski and faria, last days of wm5 roms).
if possible, you should try to reflash back to 1.05 (i think they were customized so you shouldn't have problems).
official t-mobile roms won't let you downgrade to my understanding...at least not from one official t-mobile to another official (3.08 --> 2.26 or 2.26 -->1.80).
so...retry to flash buttons 1.05, then move up to 2.26...and then if you really want to flash again to 3.08.
That is exactly what I figured out last night.
When I RTFM where it says EDIT STEP 17: Flash to 3.08 .......
I took that as a instad of thinking that it contained the 2.16 rom as well as the IPL/SPL upgrades.
So I went through reflashed both back down to buttons 1.05 and then reflashed back up to 2.26 and then to WM6, everything is dandy and it is all becuase of the wonderful people here. I can not say it enough. This place is the greatest! And thank you all yet again.
I'm glad you managed to save your phone. Not many these days by counting the number of "Help" threads
Can i ask you to please give something back to the forum? please check my signature and visit the "Data crashes" solution thread. Tx
Definitly will.

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

Is this normal?

I'm sorry if this a repost or not, but i'm currently following the Upgrade procedure for windows mobile 6, and it required me to downgrade to the button rom. Everything went smooth, but i wonder. The guy in the tourital says that my IPL and SPL is one on 1.xx and another on 2.xx, as mine is both at 1.xx. i have the T-mobile MDA version, and I'm following the G3 tourital. Currently now it's just sitting there, should i continue without worry or do i need to do it over again to get one at 1.xx/2.xx. Thanks for the support
Harlan.
No - if both your ipl/spl is at 1.xx - then you are good to go, continue on to the next step.
It appears that some users (such as myself ) have to run the buttom rom twice to get both ipl/spl to be the same.
My first pass with the button rom gave me ipl of 1.xx -and spl of 2.xx
Ran the button rom a second time - and all was good
Good luck
Remember to CID unlock, then Upgrade IPL/SPL before upgrading to WM6.
Read the guide carefully,it says, the while downgrading with Button's Rom you might probably get ipl 1.xx and spl 2.xx,reflash the button's rom a few times more till you get both ipl/spl 1.xx.Its required to have both ipl/spl 1.xx to apply lokiwiz02b to SIM/CID unlock the phone,so as you already got ipl/spl 1.xx,you are lucky and good to go to run lokiwiz02b and unlock,remember only after unlocking the phone,upgrade to ipl/spl 2.xx by flashing T-mobile 2.26,ok
cheers !
Thanks
Thanks you Guys, it Successfully installed with breeze. Now that i upgraded the rom by installing the 2.26 before WM6, I'm getting 200% better reception, like it would take an hour or more Just to get reception ANYWHERE!!!!, I'm not kidding. Now that i finished up and installed the black diamond WM6, as soon i hit the today screen, I'm already connected to t-mobile. Thank you everybody for telling me that I'm safe on continuing the installer with both 1.xx ipl/spl, because now i have better reception, touch, unlocked, MDA. Thanks xda-developers for the great information.
Harlan.

ooh no!! please help me

ok guys i f***** up my mda gets stuck at second splash screen the one that tells you ipl/spl and stuff
i was flashing a new rom using a prog called shelltool which i got from here as my device isnt cid unlocked i was using this rom
http://forum.xda-developers.com/showthread.php?t=403096
dunno whats happened but now its stuck and cant seem to get it sorted here are some details
ipl 3.08
spl 3.08
gsm 02.69.11
os 2.18.0.0
i have tried using a rom update utility but doesnt work, please help
You can always flash back to your MDA stock ROM.
After flashing back, flash to Button's ROM to downgrade your IPL and SPL and unlock your CID. However due to your IPL and SPL is at 3.08, there is a possibility that you can downgrade IPL to 1.01, however SPL stays at 3.08. In that case, try unlock CID using Wizard Service Tool (Actually you can also use WST if both IPL and SPL version are 1.01).
Note: Never use ShellTool ever. There are methods now that use RUU to flash your favorite ROM, both for G3 and G4. You should use those methods instead.
the same thing happened to me when I was very hesitant on cid unlocking my 838 . I use shelltool in flashing and was successful but when i decided to give another shot on a different cooked rom, it certainly did its job on flashing but never got pass on the IPL SPL screen.
then I follow Dr. P's guide (CID unlocking) then I successfully resurrected my 838 and now I can flash whatever cooked rom I want (given that it is for a G3 device)
btw, after flashing my 838 with the buttons rom, I use WST instead of lokiwiz
HTHs
thanks
thanks for your help guys got it sorted and cid unlocked now
just need a really good rom now
and the hunting begins
good to hear that try to look for a rom that will suit your needs. There is a lot of good roms here, just try to search what best fit you.
like I did, i have flashed at least 5 different roms in just a months time

Categories

Resources