Database Develop

Flash QTEK Rom To MDA ver. 2.21

Hello!
I wan't to totally get rid off the T-Mobile branding and so I decided flashing the original qtek rom ver. 2.18 GER. I used awizard to unlock cid, backup roms and afterwards tried to flash the QTEK rom. Now the program throwed error 296 "upgrade only". I read several posts in the forum describing how to do a downgrade and downloaded the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe which I tried to flash to the phone before upgrading to qtek ROM. But when I try to flash the custom rom the updater gives me "ERROR 300":this ROM cannot be used with your phone.
Does anyone have a solution for this?
TIA.

okay... I read a bit more and seems that there is currently no possibility to flash another rom into my phone with version 2.21 without turning it into a brick, right? so I think I will better keep the TMO software until anyone finds a possibility to do an up- or downgrade on this...

If your IPL and SPL were 2.xx, then you can upgrade your ROM to any 2.xx Wizard rom by following this instruction: http://forum.xda-developers.com/viewtopic.php?t=56088
Alternatively, you could install my cooked rom Wizard_Love 2.26 (it is safe, because it doesn't contain IPL and SPL part) which is a operator-independent ROM.

thx wlove!
so just to clarify that I understand it right- with this tutorial I WILL be able to flash the ver. 2.18 of the QTEK rom to my IPL/SPL ver. 2.21 phone?

Yes, just follow the instruction carefully, then you will definitely get it done (not just for 2.18 version, but for all the higher rom version as well). I have done it over and over again using this method without any problem. This method is safe, because it doesn't your touch the IPL and SPL part, even if your computer was power off in middle of flashing, you'll still be able to flash it again, your phone is not death yet. However, remember do a full charge of your battery before upgrading your ROM. Good luck.

thank you! I was finally able to flash my phone with an unbranded rom version!

Nice, enjoy your new ROM.

Downgradeing HTC Wizard

Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot

It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..

Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.

mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...

Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..

Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).

mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!

Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..

Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan

A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works

stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe

Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway

I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)

Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2

HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....

Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks

could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.

Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.

Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got

I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE

radio rom problem

hi...
i am a little noob when it comes to rom upgrading. so, i apologise if this is a stupid question. i flashed my wizard with wizard love rom. the ipl and spl both show 1.01 and os 2.26.10.2..but, no gsm.also, my phone doesn't catch signals.now, if i need to flash a radio rom, which radio rom should i flash, and is there any risk of bricking my device ??
thanks..
puja

There's very little risk (I'm definitely not going to say there's none because you always take some risk when flashing) with flashing a radio ROM. I kind of curious though, most people only flash the wizard love ROM so they can CID unlock before going on to flashing other ROM's such as a WM6 version. Are you planning on keeping the wizard love ROM as your OS? Which radio ROM you decide to flash kind of depends on where are and what ROM you're using. 2.19.11 seems to be the most popular one to flash though. Check the wizard wiki if you need to download it.

Basically flasing Radio ROM will not brick the device, and it also does not require CID unlocking.
Beside 2.19.11, 2.47.11 and 2.69.11 Radio ROM are also popular.
If you have unlocked your device after downgrading IPL and SPL, just get a 3.08 IPL/SPL upgrade package and you will get all IPL/SPL/Radio ROM upgraded to the most current version.
p.s. You now have IPL/SPL 1.01 that is too old and should be upgraded (Instead you MUST upgrade to at least 2.xx if you plan to use WM6)

i was earlier having ipl n spl 2.xx..but i wanted to unlock my device.so, i downgraded to button's 1.05 rom..but i couldn't unlock it (See my post in the topic 'The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards'), after which i decided to simply flash the love rom...

What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection

edit. sorry

starkwong said:
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
Click to expand...
Click to collapse
when i run 'lokiwiz.bat' as instructed, it says 'your phone is now unlocked', but my device doesn't reboot..u may read my post in ''The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards"..is there any way to check if my phone is unlocked or not ???

Search for and download wizard service tool. It has a button on it that you can press and it will tell you if you're unlocked or not.

I'll save you the searching since about 10 seconds after I wrote that last post I saw the wizard service tool thread. It's here - http://forum.xda-developers.com/showthread.php?t=295038

Downgrade Locked G3 with 3.08 IPL/SPL

I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2

Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.

Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol

I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas

You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp

Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario

imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry

Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.

thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry

ooh no!! please help me

ok guys i f***** up my mda gets stuck at second splash screen the one that tells you ipl/spl and stuff
i was flashing a new rom using a prog called shelltool which i got from here as my device isnt cid unlocked i was using this rom
http://forum.xda-developers.com/showthread.php?t=403096
dunno whats happened but now its stuck and cant seem to get it sorted here are some details
ipl 3.08
spl 3.08
gsm 02.69.11
os 2.18.0.0
i have tried using a rom update utility but doesnt work, please help

You can always flash back to your MDA stock ROM.
After flashing back, flash to Button's ROM to downgrade your IPL and SPL and unlock your CID. However due to your IPL and SPL is at 3.08, there is a possibility that you can downgrade IPL to 1.01, however SPL stays at 3.08. In that case, try unlock CID using Wizard Service Tool (Actually you can also use WST if both IPL and SPL version are 1.01).
Note: Never use ShellTool ever. There are methods now that use RUU to flash your favorite ROM, both for G3 and G4. You should use those methods instead.

the same thing happened to me when I was very hesitant on cid unlocking my 838 . I use shelltool in flashing and was successful but when i decided to give another shot on a different cooked rom, it certainly did its job on flashing but never got pass on the IPL SPL screen.
then I follow Dr. P's guide (CID unlocking) then I successfully resurrected my 838 and now I can flash whatever cooked rom I want (given that it is for a G3 device)
btw, after flashing my 838 with the buttons rom, I use WST instead of lokiwiz
HTHs

thanks
thanks for your help guys got it sorted and cid unlocked now
just need a really good rom now
and the hunting begins

good to hear that try to look for a rom that will suit your needs. There is a lot of good roms here, just try to search what best fit you.
like I did, i have flashed at least 5 different roms in just a months time