Related
hi all i tried to bootload my w8 today but i am stuck at the identifying part ...i shut down my phone and when i rebooted it when straight to xrecovery (flash mode ?), the guide says i need to press back ..but even after a long time nothing happens ..and when i open folder for the flash app on my PC , i cant see anything written w8 , all is x8 ,x10 , x10mini ..is my w8 doomed from bootloading?
Just power of the phone, hold the back button, and then connect it to the PC.
DON´T power it on.
DON´T release the back button until you see the Simlock certififcate.
oh..so how long should i press? i spammed on the back for like 1minute
i suddenly went into CWM wow ...and it says bug and alot of numbers ..and in CWM it sats FATAL : coundn't generate a valid backup for the current recovery
CRAPPP MY PHONE BRICKED AFTER I GOT THE click any key to continue option ...my phone just shuts down and is not opening!
I was currently installing a V6 supercharger on my Xperia x8 then it suddenly stopped. It automatically restarted then it's stuck on the SE logo. I already tried PC Companion and SEUS but it won't recognize my device when it comes to the "press the back button" thing. Already tried a flashing tool with the stock firmware but it says error flashing. Been searching for almost half a day for fixes. Can anyone help? Thanks in advance.
Put battery out open PCC
Put battery in hold back button
And connect x8 to pc and restore it
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Put battery out open PCC
Put battery in hold back button
And connect x8 to pc and restore it
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
Still, PCC can't detect my phone. Still stuck on the press the back button thing.
iGarou said:
Still, PCC can't detect my phone. Still stuck on the press the back button thing.
Click to expand...
Click to collapse
Turn off phone hold back button and connect usb
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Turn off phone hold back button and connect usb
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
Still the same. Thanks though.
Already fixed. Flashed with flashing tool with different firmware.
Hello,
I think I've bricked my X8 and I'd need some help, I'd really appreciate it :laugh:
Well, I had nAa kernel and LewaOS ported, but something went wrong and it was unstable lately, 'til it got frozen at loading screen and I couldn't do anything anymore, so I decided to go back to stock kernel and ROM, but I was hurried and I didn't pay much attention to what I was doing, so I flashed E15i kernel, instead of E15, so my mobile phone is now stucked at "Sony Ericsson" loading screen, but nothing happens.
I've been reading guides and well, it seems quite simple: use flashtool or PCC to unbrick it, okey. But here's my problem: when I have to turn my phone off -and then hold back button...- my phone won't go off: I press power switch but nothing happens, so I can't switch it off, and if I just remove battery it doesn't work (Flashtool or PCC, I tried both), so, what the he** can I do?
Any ideas?
Thanks
remove your battery, and wait 10 secs, then insert it and try with flashtool, if it doesnt work, remove baterry again, and try with pc companion, do a repair phone. that should work, i had a similar problem like that before...
pull out battery
connect usb cable
prepare flash tool or PCC
press back button
if flashtool or PCC is ready to flash
put battery in phone
wait for green led/light
if i helped press thanks button
FloWy99 said:
Hello,
I think I've bricked my X8 and I'd need some help, I'd really appreciate it :laugh:
Well, I had nAa kernel and LewaOS ported, but something went wrong and it was unstable lately, 'til it got frozen at loading screen and I couldn't do anything anymore, so I decided to go back to stock kernel and ROM, but I was hurried and I didn't pay much attention to what I was doing, so I flashed E15i kernel, instead of E15, so my mobile phone is now stucked at "Sony Ericsson" loading screen, but nothing happens.
I've been reading guides and well, it seems quite simple: use flashtool or PCC to unbrick it, okey. But here's my problem: when I have to turn my phone off -and then hold back button...- my phone won't go off: I press power switch but nothing happens, so I can't switch it off, and if I just remove battery it doesn't work (Flashtool or PCC, I tried both), so, what the he** can I do?
Any ideas?
Thanks
Click to expand...
Click to collapse
Its a softbrick bro follow what the developers said
Sent from my E15i using xda premium
Thanks
It's not working, I did exactly what you told me, but there's no green flashmode light, just a blinking red one. Mobile doesn't have a light when I connect it to the charger either. Now I'm fearing that battery is dead
FloWy99 said:
Thanks
It's not working, I did exactly what you told me, but there's no green flashmode light, just a blinking red one. Mobile doesn't have a light when I connect it to the charger either. Now I'm fearing that battery is dead
Click to expand...
Click to collapse
Connect your mobile 2-3 hours in charging mode & then perform this
Sent from my E15i using xda premium
Remember to hold the BACK button when inserting USB so you can enter flash mode.
Cheers,
Mistev
Maybe your phone just need charging,leave it at the charger for an hour,sometimes when it has low battery the light doesn't light up immediately when you connect your charger
And then follow the steps as described at the above posts
Sent from my X8 using xda premium
do not flash loader.sin
Simply usw pcc, it helped me while I bricked my x8 in flashing another. Rom. I have no option to get it back... But pcc>> repair phone worked great...
One thing is important in your case. After downloading when you reconnect your data cable, don't forget to press back button instantly for 5 second. After that phone update will be start....
I hope it will be helped...
Sent from my E15i using xda app-developers app
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Try the safe mode,keep pressing vol down with power until the phone boot completely.
If the phone boot to safe mode than do a factory reset.
Sent from my C6602 using xda premium
GeertNool said:
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Click to expand...
Click to collapse
Welcome to XDA
you should go to the recovery thread in my signature. Read the first 2 posts.
Hope you recover your phone.
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
al3xwhite said:
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
Click to expand...
Click to collapse
Yes.
When the battery dies the phone should reset itself.
After the loops end plug into a charger, not pc for now.
You should get a red led indicating low battery level charging is working.
After the red led you may get Sony boot screen or bootloops.
If you get Sony and then the charging battery icon, then charge to over 50%. Then use pc companion or flashtool to restore.
If you get bootloops then read my 2nd post from the recovery thread in my signature for bootloop tricks.
Please let me know if it works. I am looking to add the Xperia Z to my recovery guide.
If there are any questions about my guide please ask in that thread.
Thanks
From Jaramie's LT28at
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
vaud27 said:
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
Click to expand...
Click to collapse
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
gm007 said:
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
vaud27 said:
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
Click to expand...
Click to collapse
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Check schaggo post up^^^^
Sent from my C6602 using xda premium
gm007 said:
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i will try to flash it using flashtool. thanks for your help mate
had the same problem and i managed to fix it just showing sony sign by installing the sony update programme on the sony update website
all you do is put phone into flashboot mode.
on mine i had to hold up and power button untill it vibrates 3 times then press down volume button to get it into flashboot mode
takes a few atempts but it worked.
takes around 20 mins to download then install another 10.
i couldnt get flashtool to flash firmware as my phone is locked on 3 mobile firmware locked bootloader
i hope this helps you
update:
schaggo method works. i can breath now. thanks to @gm007
This worked great for unbricking mine !!
P.S. don't waste time for Sony's Emma flash, they do not send login credentials in real time, site says they do manual user validation ...
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
AW: [Q] Xperia Z possible brick
racht said:
...don't waste time for Sony's Emma flash, they do not send login credentials in real time...
Click to expand...
Click to collapse
They never will. Read the instructions which come with EMMA. I have it working fine, officially, without any credentials.
flashtool not flash the phone
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
[email protected] said:
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
[email protected] said:
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
It probably means your battery was low.
From my Xperia LT28at ION
gm007 said:
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for response. Finally flashtool 0.9.10.1b works for me!
Returning to stock
Hey guys,
I've flashed [ROM][JB 4.2.2][CM10.1][AOKP-MR1][PananoidAndroid 3.15] PAC v22.1.1 - Update: 0508 from http://forum.xda-developers.com/showthread.php?t=2208249&page=65. It's working, but I'd like to try another ROM, specifically Xperia Z Revolution™ from http://forum.xda-developers.com/showthread.php?t=2175903. This requires to install stock 10.1.A.1.434 firstly So I downloaded C6603_10.1.A.1.434_Generic DE, NL, world. Flashing with Flashtools 0.9.10.1 always stucks at 0%.
BL unlocked. Does anyone have any idea how to get stock 434 in the phone? Originally there were older one 10.1.A.1.340, if it's somehow important to know...
nice to meet you guys,
i am new here.
it starts with,
when i want to flash new rom it works perfectly fine.
but after finishing installation of rom it asks for reboot...
after rebooting there is no coming back to nothing in screen
i have serious problem with my Xperia SP
hard brick problem
no vibrate
no light
no chargin sign
flashtool
pc companion
volum up-down with usb cable...an
with power button
nothing working...
please , help
Before My SP has-
DoomKernel V3
CWM - 6.0.3.7
TWRP- 2.0.x.x
ROM-
Existenz v 1.3.7
(camera problem that's why i was tryin to install another rom called Mahdi-v2.0)
Now charging till 3hours.....
but there is absolutly no response from my Phone........
please, somebody help me about my phone......
also i am tryin and serching in xda for something usefull and responsed with my phone.....
thank you very much,
and.
sorry for taking your valuable time
SEUS
Have you tried SEUS for repairing your software? Always works for me
won't help with SUS
Nanostray said:
Have you tried SEUS for repairing your software? Always works for me
Click to expand...
Click to collapse
tried everything include Sony Update Service (SUS)
but.... my problem is
phone get nothin (Vibrate, Light)
if i pressed Volume down with power
or volume down with USB through Flashtool
is there anything could i try??
thanks for helpin, mate!!
Do you unlock your bootloader first?
Sent from My XSP
Solution..
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Pulsa said:
Do you unlock your bootloader first?
Sent from My XSP
Click to expand...
Click to collapse
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
shojeep said:
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
Click to expand...
Click to collapse
Isn't Fastboot mode volume +?
sid8840 said:
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Click to expand...
Click to collapse
Really appriciate for your helping comments....
but.
how do i suppose to do that, where no power no led and no response from FlashTools....?
please give some instruction Step by Step
I already have CM11 (4.4) kitkat with Gapps.
but how to give the kernel for cm11 4.4?
thnks...mate
Hey, first to answer your question, the CM 11 kernel is inside the ROM .zip called "boot.img". So just to understand you, you have had eXistenZ Ultra 1.3.7 (which is in case no ROM but a kind of update) and then you Installed mahdi ROM over it, right? And now your phone is like dropped into a pool. If so the chance to reanimate your phone is unfortunately very low. I heard about a USB-JIG and J-TAG which can help but don't know if that works.
Nevertheless, I hope I could help a little bit and good luck
Sent from my C5303 using xda app-developers app
try while pressing volume up and usb connected press the powrr button for a while
Sent from my C5303 using xda app-developers app
Nanostray said:
Isn't Fastboot mode volume +?
Click to expand...
Click to collapse
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
keep faith
shojeep said:
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
Click to expand...
Click to collapse
I'm sorry to hear none of it works, but don't give up yet mate, I'm sure someone here on the forum can help you!
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
sid8840 said:
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
Click to expand...
Click to collapse
after charging with wall charger now device showing the red light.......
now what to do?
Press the offbutton behind the backflip until it vibrate 3 times. Then press vol+ and put the usb cabel into phone. Now there is a blue light! You are in fastboot mode and the phone is ready to flash the bootimage. that's all you have to do! Good luck!
Janith Olagama said:
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
thnks for replying
but when i open cmd and type
fastboot flash boot boot.img and press enter
<waiting for device>
then while i press volume down either up it's blinkd the red light.....repetadly...
with flashtools i got nothing also...
please, replay
If red light comes after changing... That means your phone is not bricked
sent from my galaxy grand duos
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Salo-S said:
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Click to expand...
Click to collapse
thank you very much for replying
but...still got the problem.....
"hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7."
there is nothing appear on my windows screen, device manager, safe remove connectivity (also i have all the drivers installed adb/google-universal/sony pcc/sony update.
everything was closed....
after that....
there is red light appera on my mobile and stand by 2mins
in this 2 mins....i opend as you say-
"and see if the phone is being detected by FlashTool."
but in my flash tool screen i got-
"25/007/2013 00:07:24 - INFO - <- This level is successfully initialized
25/007/2013 00:07:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/007/2013 00:07:28 - INFO - Device disconnected
"
(2 mins finished)
and everything off again......(still connected with USB to PC)
no light .. no vibrate.
what to do now?
please, reply.
thanks for your helping advices and comments.....