I was currently installing a V6 supercharger on my Xperia x8 then it suddenly stopped. It automatically restarted then it's stuck on the SE logo. I already tried PC Companion and SEUS but it won't recognize my device when it comes to the "press the back button" thing. Already tried a flashing tool with the stock firmware but it says error flashing. Been searching for almost half a day for fixes. Can anyone help? Thanks in advance.
Put battery out open PCC
Put battery in hold back button
And connect x8 to pc and restore it
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Put battery out open PCC
Put battery in hold back button
And connect x8 to pc and restore it
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
Still, PCC can't detect my phone. Still stuck on the press the back button thing.
iGarou said:
Still, PCC can't detect my phone. Still stuck on the press the back button thing.
Click to expand...
Click to collapse
Turn off phone hold back button and connect usb
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Turn off phone hold back button and connect usb
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
Still the same. Thanks though.
Already fixed. Flashed with flashing tool with different firmware.
Related
hello i tried to intall this http://forum.xda-developers.com/showthread.php?t=1004740 and when i rebooted and try to unlock it it says
sorry! the aplication dpsmanages(process.com.bel.android.dpsmanager)has stoped unexpectedly)pleasy try again
and the somtihng about luncher pro...
i cant run xrecovery i press the button for xrecovery but it isnt show up..
is it bricked? or what should i do now?
reboot and when the kernel logo appears press back button like a mad man.
if the recovery does not appear:
1turn off your phone
2install SEUS (sonny ericson update service)
3install drivers for xperia x8 (gordons gate i think they are called search the forum)
4while phone is off, press and hold back, plug the usb cable and a green led should appear
5go for recovery in SEUS
cheers
thanks
Better use flashtool.if you have unlocked the bootloader
Sent from my E15i using Tapatalk
what do u mean?
It doesnt matter you have unlocked bootloader or not, you can always use flashtool...
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
VaterFrost24 said:
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
Click to expand...
Click to collapse
If you tried this via the official PCCompanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
emuX said:
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
Click to expand...
Click to collapse
I can't even enter Recovery because it immediately restarts after the Sony Logo!
gregbradley said:
If you tried this via the official PCCOmpanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
Click to expand...
Click to collapse
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You cant enter recovery if you have not unlocked the bootloader, rooted and installed Recovery
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
gregbradley said:
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
Click to expand...
Click to collapse
I know what you mean, but when i plug in the USB-cable, the phone automatically turns on.
The menu is like this: SEARCH -> CONNECT (i plug in the cable) -> RECOGNITION -> at this point the phone is on for a few seconds
but it turns off and aborts the update!
This error appears: "PC Companion could not connect to the phone... please read the document troubleshooting".
But no point in this document helps me. There are only proposals like:
-use another USB port
- turn the phone off and on again
- Use another USB-cable
Seems like Sony bricked it with it's own software
Take it back to the shop then
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
Did you try :
while device is power ON
Volume Up + POWER (for 10 seconds) -> resets the battery, its like removing the battery and putting it back in [device will vibrate once]
Volume Up + POWER (for additional 5 seconds, total 15 seconds) -> will power off hard, device will power down [device will vibrate thrice]
Click to expand...
Click to collapse
Maybe nothing will happend but it cost nothing to try...
babylonbwoy said:
Maybe nothing will happend but it cost nothing to try...
Click to expand...
Click to collapse
Thanks for the description! While trying things out i noticed the vibration signal but didnt know what it means.
Nothing happened
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You don't have to. You have to put the device in fastboot or flashmode which you reach by holding either vol-up or vol-down BEFORE respectively WHILE hooking the phone up to your pc.
But as greg said, undplug and completely power off your device and put it aside. Then start PC Companion and chose repair. PC Companion will then guide you through the steps necessary to get your phone to a state where it can be reflashed.
because it always restarts. There are only 2 modes: loop or off.
Click to expand...
Click to collapse
Not true, it does not restart by itself in either flashmode nor fastboot mode
As pointed out above, theres fastboot mode and flashmode which bypass the failing OS bootup
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
You obviously have no clue what a brick is. You have a bootlooping device which is nowhere near a brick. But that's probably a detail you're not interested in.
Try to follow the steps above to repair (=basically a full on, clean reflash in Sony vocabulary) your phone and get rid of the bootloop.
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
mani234 said:
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
Click to expand...
Click to collapse
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
gregbradley said:
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
Click to expand...
Click to collapse
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
mani234 said:
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
Click to expand...
Click to collapse
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
gregbradley said:
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
Click to expand...
Click to collapse
got this when i connected with vol- held down
regards
mani234 said:
got this when i connected with vol- held down
regards
Click to expand...
Click to collapse
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
gregbradley said:
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
Click to expand...
Click to collapse
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
mani234 said:
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
Click to expand...
Click to collapse
tried the flashtool with the relevant ftf file but after an initial connection phase it kept bootlooping back out of 'connected mode'. however i left i (trial and error) and it did start to flash the ftf but initially it stopped around 40% then re-bootlooped. i messed around with vol- connection to usb and power plus vol+ shutdown method (which incidentally did not vibrate) serval times left it plugged in and each time it started but stopped flashing around 92-94% complete. having got frustrated i just thought what the hell and left it to attempt to charge overnight (i say attempt as this method never seemed to charge the device once i had this problem). Anyways i must've done something right (or not!:silly as i tried it again but today there must've been some charge applied as it flashed on the second attempt i tried (the first resulted in another aborted flash) it flashed my T no problem!:good:
thank you guys!:laugh:
Glad it worked out for you.
But you activated USB-Debugging before your phone started looping right?
Sent from my LT30p using xda app-developers app
Hello,
I think I've bricked my X8 and I'd need some help, I'd really appreciate it :laugh:
Well, I had nAa kernel and LewaOS ported, but something went wrong and it was unstable lately, 'til it got frozen at loading screen and I couldn't do anything anymore, so I decided to go back to stock kernel and ROM, but I was hurried and I didn't pay much attention to what I was doing, so I flashed E15i kernel, instead of E15, so my mobile phone is now stucked at "Sony Ericsson" loading screen, but nothing happens.
I've been reading guides and well, it seems quite simple: use flashtool or PCC to unbrick it, okey. But here's my problem: when I have to turn my phone off -and then hold back button...- my phone won't go off: I press power switch but nothing happens, so I can't switch it off, and if I just remove battery it doesn't work (Flashtool or PCC, I tried both), so, what the he** can I do?
Any ideas?
Thanks
remove your battery, and wait 10 secs, then insert it and try with flashtool, if it doesnt work, remove baterry again, and try with pc companion, do a repair phone. that should work, i had a similar problem like that before...
pull out battery
connect usb cable
prepare flash tool or PCC
press back button
if flashtool or PCC is ready to flash
put battery in phone
wait for green led/light
if i helped press thanks button
FloWy99 said:
Hello,
I think I've bricked my X8 and I'd need some help, I'd really appreciate it :laugh:
Well, I had nAa kernel and LewaOS ported, but something went wrong and it was unstable lately, 'til it got frozen at loading screen and I couldn't do anything anymore, so I decided to go back to stock kernel and ROM, but I was hurried and I didn't pay much attention to what I was doing, so I flashed E15i kernel, instead of E15, so my mobile phone is now stucked at "Sony Ericsson" loading screen, but nothing happens.
I've been reading guides and well, it seems quite simple: use flashtool or PCC to unbrick it, okey. But here's my problem: when I have to turn my phone off -and then hold back button...- my phone won't go off: I press power switch but nothing happens, so I can't switch it off, and if I just remove battery it doesn't work (Flashtool or PCC, I tried both), so, what the he** can I do?
Any ideas?
Thanks
Click to expand...
Click to collapse
Its a softbrick bro follow what the developers said
Sent from my E15i using xda premium
Thanks
It's not working, I did exactly what you told me, but there's no green flashmode light, just a blinking red one. Mobile doesn't have a light when I connect it to the charger either. Now I'm fearing that battery is dead
FloWy99 said:
Thanks
It's not working, I did exactly what you told me, but there's no green flashmode light, just a blinking red one. Mobile doesn't have a light when I connect it to the charger either. Now I'm fearing that battery is dead
Click to expand...
Click to collapse
Connect your mobile 2-3 hours in charging mode & then perform this
Sent from my E15i using xda premium
Remember to hold the BACK button when inserting USB so you can enter flash mode.
Cheers,
Mistev
Maybe your phone just need charging,leave it at the charger for an hour,sometimes when it has low battery the light doesn't light up immediately when you connect your charger
And then follow the steps as described at the above posts
Sent from my X8 using xda premium
do not flash loader.sin
Simply usw pcc, it helped me while I bricked my x8 in flashing another. Rom. I have no option to get it back... But pcc>> repair phone worked great...
One thing is important in your case. After downloading when you reconnect your data cable, don't forget to press back button instantly for 5 second. After that phone update will be start....
I hope it will be helped...
Sent from my E15i using xda app-developers app
My z1 randomly shut down and won't turn back on. Tried the volume rocker+ power also pushed the power button near the sim, still nothing. Any help?
ypungdaro said:
My z1 randomly shut down and won't turn back on. Tried the volume rocker+ power also pushed the power button near the sim, still nothing. Any help?
Click to expand...
Click to collapse
Try holding that red button for 5 seconds. If that doesn't work, try plugging it in to a charger. Does the led turn on?
i
ypungdaro said:
My z1 randomly shut down and won't turn back on. Tried the volume rocker+ power also pushed the power button near the sim, still nothing. Any help?
Click to expand...
Click to collapse
hard reset!
before anything else first try to repair firmware by PCC
if install fresh firmware of ur region.
if repairing don't solve problem u should download another stock firmware and flash it by flash-tool
:good:
x102x96x said:
hard reset!
before anything else first try to repair firmware by PCC
if install fresh firmware of ur region.
if repairing don't solve problem u should download another stock firmware and flash it by flash-tool
:good:
Click to expand...
Click to collapse
have same problem
help
i
redstoneman45 said:
have same problem
help
Click to expand...
Click to collapse
so did u tried wht i said previously?
if u tried please tell about current condition of ur phone
:good:
x102x96x said:
so did u tried wht i said previously?
if u tried please tell about current condition of ur phone
:good:
Click to expand...
Click to collapse
how do you connect your phone to the computer ?
and my phone is in good condition : )
hi
well im using Xperia V and i tried flashing it but of course im stupid and didnt "fix" the right settings...
so now it wont boot up? i can start it but it shows the sony logo then its all black and it shuts down again... i am able to go into fastboot and flash mode i think thats what its called but when i do that and use flash tool it just restarts and goes back into the black screen and shuts down
Im using linux so please dont post anything windows related? i can probably get my uncles laptop but id rather not
sorry if this is in the wrong place
please help tho?
Flash official ftf 4.3 via flashtool or cmd.
alial04 said:
Flash official ftf 4.3 via flashtool or cmd.
Click to expand...
Click to collapse
i cant do that ... whenever i plug it in and then after a little while it restarts
3r0rfadeness said:
i cant do that ... whenever i plug it in and then after a little while it restarts
Click to expand...
Click to collapse
remove the battery for 10 sec or force power off completely by holding vol up down and power button . using flashtool connect the mobile only when it say connect. i mean just select the rom and click flash without connecting the phone . then in a few sec it will ask you to connect the mobile . connect it by holding the vol down button . hope it works