Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
VaterFrost24 said:
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
Click to expand...
Click to collapse
If you tried this via the official PCCompanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
emuX said:
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
Click to expand...
Click to collapse
I can't even enter Recovery because it immediately restarts after the Sony Logo!
gregbradley said:
If you tried this via the official PCCOmpanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
Click to expand...
Click to collapse
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You cant enter recovery if you have not unlocked the bootloader, rooted and installed Recovery
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
gregbradley said:
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
Click to expand...
Click to collapse
I know what you mean, but when i plug in the USB-cable, the phone automatically turns on.
The menu is like this: SEARCH -> CONNECT (i plug in the cable) -> RECOGNITION -> at this point the phone is on for a few seconds
but it turns off and aborts the update!
This error appears: "PC Companion could not connect to the phone... please read the document troubleshooting".
But no point in this document helps me. There are only proposals like:
-use another USB port
- turn the phone off and on again
- Use another USB-cable
Seems like Sony bricked it with it's own software
Take it back to the shop then
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
Did you try :
while device is power ON
Volume Up + POWER (for 10 seconds) -> resets the battery, its like removing the battery and putting it back in [device will vibrate once]
Volume Up + POWER (for additional 5 seconds, total 15 seconds) -> will power off hard, device will power down [device will vibrate thrice]
Click to expand...
Click to collapse
Maybe nothing will happend but it cost nothing to try...
babylonbwoy said:
Maybe nothing will happend but it cost nothing to try...
Click to expand...
Click to collapse
Thanks for the description! While trying things out i noticed the vibration signal but didnt know what it means.
Nothing happened
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You don't have to. You have to put the device in fastboot or flashmode which you reach by holding either vol-up or vol-down BEFORE respectively WHILE hooking the phone up to your pc.
But as greg said, undplug and completely power off your device and put it aside. Then start PC Companion and chose repair. PC Companion will then guide you through the steps necessary to get your phone to a state where it can be reflashed.
because it always restarts. There are only 2 modes: loop or off.
Click to expand...
Click to collapse
Not true, it does not restart by itself in either flashmode nor fastboot mode
As pointed out above, theres fastboot mode and flashmode which bypass the failing OS bootup
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
You obviously have no clue what a brick is. You have a bootlooping device which is nowhere near a brick. But that's probably a detail you're not interested in.
Try to follow the steps above to repair (=basically a full on, clean reflash in Sony vocabulary) your phone and get rid of the bootloop.
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
mani234 said:
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
Click to expand...
Click to collapse
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
gregbradley said:
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
Click to expand...
Click to collapse
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
mani234 said:
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
Click to expand...
Click to collapse
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
gregbradley said:
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
Click to expand...
Click to collapse
got this when i connected with vol- held down
regards
mani234 said:
got this when i connected with vol- held down
regards
Click to expand...
Click to collapse
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
gregbradley said:
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
Click to expand...
Click to collapse
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
mani234 said:
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
Click to expand...
Click to collapse
tried the flashtool with the relevant ftf file but after an initial connection phase it kept bootlooping back out of 'connected mode'. however i left i (trial and error) and it did start to flash the ftf but initially it stopped around 40% then re-bootlooped. i messed around with vol- connection to usb and power plus vol+ shutdown method (which incidentally did not vibrate) serval times left it plugged in and each time it started but stopped flashing around 92-94% complete. having got frustrated i just thought what the hell and left it to attempt to charge overnight (i say attempt as this method never seemed to charge the device once i had this problem). Anyways i must've done something right (or not!:silly as i tried it again but today there must've been some charge applied as it flashed on the second attempt i tried (the first resulted in another aborted flash) it flashed my T no problem!:good:
thank you guys!:laugh:
Glad it worked out for you.
But you activated USB-Debugging before your phone started looping right?
Sent from my LT30p using xda app-developers app
Related
please could any one help?\
i bought my xperia LT30p yesterday and it was working normaly and amzing
today i put it to a charger and the battery was 65% few moments later i was cheking it and the screen was off
and a white led is flashing and flashing and flashing
and its been for hours now..i tried evry thing but it wont start and my pc dont see it
what could it be? plz help
hamed shamass said:
please could any one help?\
i bought my xperia LT30p yesterday and it was working normaly and amzing
today i put it to a charger and the battery was 65% few moments later i was cheking it and the screen was off
and a white led is flashing and flashing and flashing
and its been for hours now..i tried evry thing but it wont start and my pc dont see it
what could it be? plz help
Click to expand...
Click to collapse
Press the power button and volume up for 10 -15 seconds.
it will vibrate once, that is like a restart
If you continue to hold for another 10 seconds it will vibrate 3 times. That is like pulling the battery.
Try turning it on after that
gregbradley said:
Press the power button and volume up for 10 -15 seconds.
it will vibrate once, that is like a restart
If you continue to hold for another 10 seconds it will vibrate 3 times. That is like pulling the battery.
Try turning it on after that
Click to expand...
Click to collapse
i did it and nothing happend the wihte led is still flashing :S
hamed shamass said:
i did it and nothing happend the wihte led is still flashing :S
Click to expand...
Click to collapse
Have you flashed anything to the phone?
Have you rooted it?
Have you unlocked the bootloader?
If you dont know what these mean then you will not have done them.
Please plug the phone into the wall charger and leave it for a few hours then try the power and volume up button again. It is essential you leave the phone alone in this time.
Last question, when you press the power button and the phone is on charge does the red LED come on?
gregbradley said:
Have you flashed anything to the phone?
Have you rooted it?
Have you unlocked the bootloader?
If you dont know what these mean then you will not have done them.
Please plug the phone into the wall charger and leave it for a few hours then try the power and volume up button again. It is essential you leave the phone alone in this time.
Last question, when you press the power button and the phone is on charge does the red LED come on?
Click to expand...
Click to collapse
no man i did nothing to the phone it is brand new...i opened it yesterday and it was working fine and i used the charger yesterday normaly
but today as i described it was on the charger and i came to check it and it was like this off and white led flashing
if i connect the phone to the charger now nothing appear only the white led keep flashing no red led even if i press the power button
hamed shamass said:
no man i did nothing to the phone it is brand new...i opened it yesterday and it was working fine and i used the charger yesterday normaly
but today as i described it was on the charger and i came to check it and it was like this off and white led flashing
if i connect the phone to the charger now nothing appear only the white led keep flashing no red led even if i press the power button
Click to expand...
Click to collapse
OK, try what I suggested. There may be other things that can be tried but if my phone behaved like that straight out of the box when I had not tampered with it I would take it back to the shop and demand a new one. Even we were to "fix" it via doing something on this site I would always be slightly worried I had a defective device.
Is it possible for you to return it?
gregbradley said:
OK, try what I suggested. There may be other things that can be tried but if my phone behaved like that straight out of the box when I had not tampered with it I would take it back to the shop and demand a new one. Even we were to "fix" it via doing something on this site I would always be slightly worried I had a defective device.
Is it possible for you to return it?
Click to expand...
Click to collapse
i went to the shop and he said that the phone was out for 24 hours so its not his responsbily anymore :S
hamed shamass said:
i went to the shop and he said that the phone was out for 24 hours so its not his responsbily anymore :S
Click to expand...
Click to collapse
What kind of shop is that? What country are you from? Thats terrible customer services!
Oh well, dont worry.
Have you installed PCCompanion on your PC? If not google it, download and install it. Also, look in the first thread in the development section for a thread called flashtool. Follow the links in that and download and install flashtool. We will need them if we are to save your phone. Also, they are good to have for pimping your phone later...
gregbradley said:
What kind of shop is that? What country are you from? Thats terrible customer services!
Oh well, dont worry.
Have you installed PCCompanion on your PC? If not google it, download and install it. Also, look in the first thread in the development section for a thread called flashtool. Follow the links in that and download and install flashtool. We will need them if we are to save your phone. Also, they are good to have for pimping your phone later...
Click to expand...
Click to collapse
yes i have installed pc comapnion but ut doesnt detect my phone i will intsall the flashtool thing now
hamed shamass said:
yes i have installed pc comapnion but ut doesnt detect my phone i will intsall the flashtool thing now
Click to expand...
Click to collapse
OK try this.
Run PCCompanion
Click start on support zone
Click on start on phone software update
Click on repair my phone (Its in blue)
Follow the instructions
If asked to pick the model of you phone choose Xperia T
If asked to connect phone in flashmode do so by pressing and holding the volume down button whilst you attach the usb cable
Tell me what happens when you do that
gregbradley said:
OK try this.
Run PCCompanion
Click start on support zone
Click on repair my phone (Its in blue)
Follow the instructions
If asked to pick the model of you phone choose Xperia T
If asked to connect phone in flashmode do so by pressing and holding the volume down button whilst you attach the usb cable
Tell me what happens when you do that
Click to expand...
Click to collapse
there is no repair in the support zone!!! there is phone softwear update and xperia care and recycle ur phone :S
gregbradley said:
OK try this.
Run PCCompanion
Click start on support zone
Click on start on phone software update
Click on repair my phone (Its in blue)
Follow the instructions
If asked to pick the model of you phone choose Xperia T
If asked to connect phone in flashmode do so by pressing and holding the volume down button whilst you attach the usb cable
Tell me what happens when you do that
Click to expand...
Click to collapse
hamed shamass said:
there is no repair in the support zone!!! there is phone softwear update and xperia care and recycle ur phone :S
Click to expand...
Click to collapse
Look again at my instructions
gregbradley said:
Look again at my instructions
Click to expand...
Click to collapse
found it
hamed shamass said:
found it
Click to expand...
Click to collapse
OK, you will have to wait now while the program downloads the software for your phone.
Once done it will prompt you again.
I may be offline when it has finished, but either tell me what it says next or tell me it worked and then smash my thanks button
If it doesnt work i will give you some more things we can try in the morning (I am inthe UK)
gregbradley said:
OK, you will have to wait now while the program downloads the software for your phone.
Once done it will prompt you again.
I may be offline when it has finished, but either tell me what it says next or tell me it worked and then smash my thanks button
If it doesnt work i will give you some more things we can try in the morning (I am inthe UK)
Click to expand...
Click to collapse
the download was finished and the prompt said the hold the down button but nothing happend :S it cant see the phone is still off and white led blinking
hamed shamass said:
the download was finished and the prompt said the hold the down button but nothing happend :S it cant see the phone is still off and white led blinking
Click to expand...
Click to collapse
Last thing to try tonight
Download flashtool
Goto the installation folder and then into the driver folder.
Run flashtool drivers
Choose nx for ICS
tx driver
flashmode driver
fastboot driver
Then try again with pccomapnion.
If that does not work, download a stock FTF file from post 3 in the first thread of the Q&A section.Choose any file for the xperia t.
Open flashtool
Once downloaded, drag and drop the ftf file into the open window of flashtool.
When prompted attach the phone in flashmode (press volume down when attaching the usb cable)
Thats me for thenight now.
Let me know how it goes, but I wont be back untill the morning
[ STRIKE]Just to add one thing, before you try connecting it in flash mode, do power plus volume up till you get 3 vibrates. That way you know for sure your phone is off. If your phone isn't off it won't enter flashmode[/STRIKE]
Never mind, as Greg said I just didn't read good enough.
Sent from my LT30p (Xperia T) using XDA Premium.
Did I help? please press thanks button
crazymister said:
Just to add one thing, before you try connecting it in flash mode, do power plus volume up till you get 3 vibrates. That way you know for sure your phone is off. If your phone isn't off it won't enter flashmode
Sent from my LT30p (Xperia T) using XDA Premium.
Did I help? please press thanks button
Click to expand...
Click to collapse
We already went through that, and he was not getting any vibrations.
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Try the safe mode,keep pressing vol down with power until the phone boot completely.
If the phone boot to safe mode than do a factory reset.
Sent from my C6602 using xda premium
GeertNool said:
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Click to expand...
Click to collapse
Welcome to XDA
you should go to the recovery thread in my signature. Read the first 2 posts.
Hope you recover your phone.
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
al3xwhite said:
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
Click to expand...
Click to collapse
Yes.
When the battery dies the phone should reset itself.
After the loops end plug into a charger, not pc for now.
You should get a red led indicating low battery level charging is working.
After the red led you may get Sony boot screen or bootloops.
If you get Sony and then the charging battery icon, then charge to over 50%. Then use pc companion or flashtool to restore.
If you get bootloops then read my 2nd post from the recovery thread in my signature for bootloop tricks.
Please let me know if it works. I am looking to add the Xperia Z to my recovery guide.
If there are any questions about my guide please ask in that thread.
Thanks
From Jaramie's LT28at
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
vaud27 said:
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
Click to expand...
Click to collapse
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
gm007 said:
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
vaud27 said:
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
Click to expand...
Click to collapse
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Check schaggo post up^^^^
Sent from my C6602 using xda premium
gm007 said:
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i will try to flash it using flashtool. thanks for your help mate
had the same problem and i managed to fix it just showing sony sign by installing the sony update programme on the sony update website
all you do is put phone into flashboot mode.
on mine i had to hold up and power button untill it vibrates 3 times then press down volume button to get it into flashboot mode
takes a few atempts but it worked.
takes around 20 mins to download then install another 10.
i couldnt get flashtool to flash firmware as my phone is locked on 3 mobile firmware locked bootloader
i hope this helps you
update:
schaggo method works. i can breath now. thanks to @gm007
This worked great for unbricking mine !!
P.S. don't waste time for Sony's Emma flash, they do not send login credentials in real time, site says they do manual user validation ...
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
AW: [Q] Xperia Z possible brick
racht said:
...don't waste time for Sony's Emma flash, they do not send login credentials in real time...
Click to expand...
Click to collapse
They never will. Read the instructions which come with EMMA. I have it working fine, officially, without any credentials.
flashtool not flash the phone
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
[email protected] said:
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
[email protected] said:
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
It probably means your battery was low.
From my Xperia LT28at ION
gm007 said:
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for response. Finally flashtool 0.9.10.1b works for me!
Returning to stock
Hey guys,
I've flashed [ROM][JB 4.2.2][CM10.1][AOKP-MR1][PananoidAndroid 3.15] PAC v22.1.1 - Update: 0508 from http://forum.xda-developers.com/showthread.php?t=2208249&page=65. It's working, but I'd like to try another ROM, specifically Xperia Z Revolution™ from http://forum.xda-developers.com/showthread.php?t=2175903. This requires to install stock 10.1.A.1.434 firstly So I downloaded C6603_10.1.A.1.434_Generic DE, NL, world. Flashing with Flashtools 0.9.10.1 always stucks at 0%.
BL unlocked. Does anyone have any idea how to get stock 434 in the phone? Originally there were older one 10.1.A.1.340, if it's somehow important to know...
i was restoring my sp with pc companion and my laptop shut down, the upadate was no were near complete and my phone will not turn on. the led light glows green when plugged into pc, and it does show sony boot image with a red led.
i was on .257 originally locked to orange/ee uk. i have sim unlocked it using a code. what tft file do i need? and were can i find the flash tool. thanks
okay it appears to be constantly stuck in flash mode, flash tool is finding it and verifying it in flash mode without holding the vol button down..
also pcc does not let me repair my software, it tells me it has been updated
also phone keeps bootlooping from flash mode to sony screen making it bounce out of flashtool
ykdr-scott said:
i was restoring my sp with pc companion and my laptop shut down, the upadate was no were near complete and my phone will not turn on. the led light glows green when plugged into pc, and it does show sony boot image with a red led.
i was on .257 originally locked to orange/ee uk. i have sim unlocked it using a code. what tft file do i need? and were can i find the flash tool. thanks
okay it appears to be constantly stuck in flash mode, flash tool is finding it and verifying it in flash mode without holding the vol button down..
also pcc does not let me repair my software, it tells me it has been updated
also phone keeps bootlooping from flash mode to sony screen making it bounce out of flashtool
Click to expand...
Click to collapse
You are lucky that it is a soft brick just hold the reset button for about 10 seconds.
The phone will vibrate 3 times do NOT release before 10 seconds have passed because you would only "take the battery out"
This will erase your Internal SD data and hard reset the phone.
jackaros said:
You are lucky that it is a soft brick just hold the reset button for about 10 seconds.
The phone will vibrate 3 times do NOT release before 10 seconds have passed because you would only "take the battery out"
This will erase your Internal SD data and hard reset the phone.
Click to expand...
Click to collapse
Thanks for your reply mate, I somehow managed to fix it. I flashed firmware with flashtool. Even though it didn't finish, it hung on reading phone information. I unplugged my phone and it came on.
I can only assume that flashtool at this point had frozen, And there for had somehow flashed it. Either way it's working fine, so happy days
Sent from my C5303 using xda app-developers app
ykdr-scott said:
Thanks for your reply mate, I somehow managed to fix it. I flashed firmware with flashtool. Even though it didn't finish, it hung on reading phone information. I unplugged my phone and it came on.
I can only assume that flashtool at this point had frozen, And there for had somehow flashed it. Either way it's working fine, so happy days
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Nice to hear it pal good job!!!
Hi there i have rooted my phone with doomlord's latest rootkit for c6603 UK devices (you can tell im a noob), when installng and the opening he chainfire 3 app it asked me to install some graphics drivers and i did, it then restarted and then the loop restarted (turns off after sony logo, doesn't even get to xperia logo, then turns back on). I have tried several fastboot and flash methods but the problems still persists, does anyone know of any recovery or factory reset methods wihtout having access to your xz?
Thanks
1. Hold on boot volum up and power for 12 seconds i think.
Or
2. Charge the phone and see what's happening
Gesendet von meinem C6603 mit Tapatalk
charging it goes into a reboot loop then after a few times it displays battery meter...
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
avi312singh said:
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
Click to expand...
Click to collapse
I assumed you installed chainfire 3D app.
So, if you want to flash with flashtool, you must set your phone in flash mode.
Hold vol - when plugging the usb cable in (with phone powered off).
If you got the loop, plug the USB cable pressing vol - at the moment the phone is off.
And it may warn you about usb debugging, etc but just ignore it and continue anyway. Ive got back from bootloops with this regardless of unknown sources or debugging. Usually even when bootlooping the hard shutdown will work, hold power and volume up untill the phone vibrates three times and turns off. You may feel it vibrate once, ignore and keep holding.
You do need the correct adb drivers installed to use flashtool, the downloaf here at xda i believe includes them you just have to open the drivers folder, open the exe and choose your phone from the list. If you get into flashboot mode (when you hold volume up and plug it into the computer the led should flash once to let younknow its in the right state. Sometimes flashtool will take a long time to prepare the files for flashing amf your phone will start up... Let flashtool finish prepping, then it will come up with a screen telling you to put the phone in flashmode (usually giving the wrong instructions to do so, ignore them) if so, now go ahead and unplug your phone, power it down via the hard shutdown function i mentioned, then hold volume up and plug it back in. If you get the led flash its working, and if it wont then install its because your drivers arent installed properly.
Also i may be wrong, but the chainfire 3d drivers are for older versions of android, dont try to install them again. I did this on another phone that I had upgraded to jellybean and ot softbricked it. Jellybean runs ope GL fine on this phone.
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
avi312singh said:
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
Click to expand...
Click to collapse
I have kind of the same problem here, can you please tell me how you solved it?
I rooted my z1s today, then i installed recovery then flashed the rom for our phone made by tactic, all was well but everytime i booted the phone it always said android is upgrading, then it went through all the apps, so i thought why don't i just wipe system cache data and dalvik, then install the rom again, big mistake at first it booted to the sony logo got stuck, i kept turning it off then on 3 times, then after that i just went into flash mode with the led turning blue, after that i turned it off to save battery because i didn't download the ftf and flashtool yet, so after all that is downloaded i try to go into that mode again by plugging it into my computer then volume up and power but then it shows a red led for a brief second then stays black screen, not on ithink. When plugged into my computer it shows usb device not recognized so the phone is still alive. so my question is, what can i do to save my phone? pleeease help :crying: and yes i kind of literally cried
LaosPerson said:
I rooted my z1s today, then i installed recovery then flashed the rom for our phone made by tactic, all was well but everytime i booted the phone it always said android is upgrading, then it went through all the apps, so i thought why don't i just wipe system cache data and dalvik, then install the rom again, big mistake at first it booted to the sony logo got stuck, i kept turning it off then on 3 times, then after that i just went into flash mode with the led turning blue, after that i turned it off to save battery because i didn't download the ftf and flashtool yet, so after all that is downloaded i try to go into that mode again by plugging it into my computer then volume up and power but then it shows a red led for a brief second then stays black screen, not on ithink. When plugged into my computer it shows usb device not recognized so the phone is still alive. so my question is, what can i do to save my phone? pleeease help :crying: and yes i kind of literally cried
Click to expand...
Click to collapse
You wiped the system and then wonder why there is no system?
Just repair your phone using pccompanion to get back to stock
Or
Flash a Z1S FTF using flashtool.
Then, spend some reading the threads and learning what to do before blindly flashing and wiping stuff.
gregbradley said:
You wiped the system and then wonder why there is no system?
Just repair your phone using pccompanion to get back to stock
Or
Flash a Z1S FTF using flashtool.
Then, spend some reading the threads and learning what to do before blindly flashing and wiping stuff.
Click to expand...
Click to collapse
I can't get pc companion or flash tool to read my phone, when it's connected to my computer it says usb device not recognized, but my phone still is alive but no display either
LaosPerson said:
I can't get pc companion or flash tool to read my phone, when it's connected to my computer it says usb device not recognized, but my phone still is alive but no display either
Click to expand...
Click to collapse
Have you tried using them yet?
In your last post you say you have not even downloaded flashtool yet?
Download it, run driver.exe from the driver folder in the installation path. Choose flashmode, fastboot and Z1 drivers
then run flashtool and attach the phone with it turned on.
Detach the phone
Attach the phone again in flashmode.
Please post the log from flashtool here
gregbradley said:
Have you tried using them yet?
In your last post you say you have not even downloaded flashtool yet?
Download it, run driver.exe from the driver folder in the installation path. Choose flashmode, fastboot and Z1 drivers
then run flashtool and attach the phone with it turned on.
Detach the phone
Attach the phone again in flashmode.
Please post the log from flashtool here
Click to expand...
Click to collapse
My phone doesn't even shutoff, no vibrations etc, just the computer saying device not recognized, and the phone was unplugged while trying to turn it off
flash tool also says device disconnected? and i can't upload the log file
Press and hold the power and volume up until it vibrates 3 times. Then it is off.
Just copy and paste the window from flashtool here.
LaosPerson said:
My phone doesn't even shutoff, no vibrations etc, just the computer saying device not recognized, and the phone was unplugged while trying to turn it off
flash tool also says device disconnected? and i can't upload the log file
Click to expand...
Click to collapse
i changed it to zip file but the log is inside
gregbradley said:
Press and hold the power and volume up until it vibrates 3 times. Then it is off.
Just copy and paste the window from flashtool here.
Click to expand...
Click to collapse
i tried that, doesn't work
Try it again, that should ALWAYS work, no matter what.
How long are you holding them both for?
Press and hold both of them at the same time
gregbradley said:
Try it again, that should ALWAYS work, no matter what.
How long are you holding them both for?
Press and hold both of them at the same time
Click to expand...
Click to collapse
i pressed it for at least 5 seconds, and both
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
LaosPerson said:
...so i shut it off then went into flash mode with the blue led then i turned it off from there then when...:
Click to expand...
Click to collapse
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
gregbradley said:
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
Click to expand...
Click to collapse
these don't work anymore for some reason, and again windows reognizes the device but doesn't know what it is
time to wrry, it doesn't work the vol up and power after a minute
HELP DEVICE OCNNECTED IN FLASH MODE WHAT DO I EXCLUDE IN THE FLASH ?
NVM I JUST LET it wiothout excluding anything wishh me luck
gregbradley said:
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
Click to expand...
Click to collapse
there's around 2000 files it's sending to my phone, is it normal
OMG YESSS MY PHONE STARTED :victory::victory::victory::victory:
Love you greg, thanks for always coming on xda arouund this time
No worries, My boss is not yet in at work
gregbradley said:
No worries, My boss is not yet in at work
Click to expand...
Click to collapse
HEHEHEH what helped me was telling me to hold the vol up and power for a minutes, i went further to like almost two minutes and after that i started stabbing the red button next to the sim card with a toothpick LOL