Hi there i have rooted my phone with doomlord's latest rootkit for c6603 UK devices (you can tell im a noob), when installng and the opening he chainfire 3 app it asked me to install some graphics drivers and i did, it then restarted and then the loop restarted (turns off after sony logo, doesn't even get to xperia logo, then turns back on). I have tried several fastboot and flash methods but the problems still persists, does anyone know of any recovery or factory reset methods wihtout having access to your xz?
Thanks
1. Hold on boot volum up and power for 12 seconds i think.
Or
2. Charge the phone and see what's happening
Gesendet von meinem C6603 mit Tapatalk
charging it goes into a reboot loop then after a few times it displays battery meter...
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
avi312singh said:
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
Click to expand...
Click to collapse
I assumed you installed chainfire 3D app.
So, if you want to flash with flashtool, you must set your phone in flash mode.
Hold vol - when plugging the usb cable in (with phone powered off).
If you got the loop, plug the USB cable pressing vol - at the moment the phone is off.
And it may warn you about usb debugging, etc but just ignore it and continue anyway. Ive got back from bootloops with this regardless of unknown sources or debugging. Usually even when bootlooping the hard shutdown will work, hold power and volume up untill the phone vibrates three times and turns off. You may feel it vibrate once, ignore and keep holding.
You do need the correct adb drivers installed to use flashtool, the downloaf here at xda i believe includes them you just have to open the drivers folder, open the exe and choose your phone from the list. If you get into flashboot mode (when you hold volume up and plug it into the computer the led should flash once to let younknow its in the right state. Sometimes flashtool will take a long time to prepare the files for flashing amf your phone will start up... Let flashtool finish prepping, then it will come up with a screen telling you to put the phone in flashmode (usually giving the wrong instructions to do so, ignore them) if so, now go ahead and unplug your phone, power it down via the hard shutdown function i mentioned, then hold volume up and plug it back in. If you get the led flash its working, and if it wont then install its because your drivers arent installed properly.
Also i may be wrong, but the chainfire 3d drivers are for older versions of android, dont try to install them again. I did this on another phone that I had upgraded to jellybean and ot softbricked it. Jellybean runs ope GL fine on this phone.
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
avi312singh said:
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
Click to expand...
Click to collapse
I have kind of the same problem here, can you please tell me how you solved it?
Related
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
VaterFrost24 said:
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
Click to expand...
Click to collapse
If you tried this via the official PCCompanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
emuX said:
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
Click to expand...
Click to collapse
I can't even enter Recovery because it immediately restarts after the Sony Logo!
gregbradley said:
If you tried this via the official PCCOmpanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
Click to expand...
Click to collapse
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You cant enter recovery if you have not unlocked the bootloader, rooted and installed Recovery
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
gregbradley said:
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
Click to expand...
Click to collapse
I know what you mean, but when i plug in the USB-cable, the phone automatically turns on.
The menu is like this: SEARCH -> CONNECT (i plug in the cable) -> RECOGNITION -> at this point the phone is on for a few seconds
but it turns off and aborts the update!
This error appears: "PC Companion could not connect to the phone... please read the document troubleshooting".
But no point in this document helps me. There are only proposals like:
-use another USB port
- turn the phone off and on again
- Use another USB-cable
Seems like Sony bricked it with it's own software
Take it back to the shop then
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
Did you try :
while device is power ON
Volume Up + POWER (for 10 seconds) -> resets the battery, its like removing the battery and putting it back in [device will vibrate once]
Volume Up + POWER (for additional 5 seconds, total 15 seconds) -> will power off hard, device will power down [device will vibrate thrice]
Click to expand...
Click to collapse
Maybe nothing will happend but it cost nothing to try...
babylonbwoy said:
Maybe nothing will happend but it cost nothing to try...
Click to expand...
Click to collapse
Thanks for the description! While trying things out i noticed the vibration signal but didnt know what it means.
Nothing happened
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You don't have to. You have to put the device in fastboot or flashmode which you reach by holding either vol-up or vol-down BEFORE respectively WHILE hooking the phone up to your pc.
But as greg said, undplug and completely power off your device and put it aside. Then start PC Companion and chose repair. PC Companion will then guide you through the steps necessary to get your phone to a state where it can be reflashed.
because it always restarts. There are only 2 modes: loop or off.
Click to expand...
Click to collapse
Not true, it does not restart by itself in either flashmode nor fastboot mode
As pointed out above, theres fastboot mode and flashmode which bypass the failing OS bootup
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
You obviously have no clue what a brick is. You have a bootlooping device which is nowhere near a brick. But that's probably a detail you're not interested in.
Try to follow the steps above to repair (=basically a full on, clean reflash in Sony vocabulary) your phone and get rid of the bootloop.
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
mani234 said:
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
Click to expand...
Click to collapse
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
gregbradley said:
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
Click to expand...
Click to collapse
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
mani234 said:
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
Click to expand...
Click to collapse
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
gregbradley said:
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
Click to expand...
Click to collapse
got this when i connected with vol- held down
regards
mani234 said:
got this when i connected with vol- held down
regards
Click to expand...
Click to collapse
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
gregbradley said:
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
Click to expand...
Click to collapse
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
mani234 said:
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
Click to expand...
Click to collapse
tried the flashtool with the relevant ftf file but after an initial connection phase it kept bootlooping back out of 'connected mode'. however i left i (trial and error) and it did start to flash the ftf but initially it stopped around 40% then re-bootlooped. i messed around with vol- connection to usb and power plus vol+ shutdown method (which incidentally did not vibrate) serval times left it plugged in and each time it started but stopped flashing around 92-94% complete. having got frustrated i just thought what the hell and left it to attempt to charge overnight (i say attempt as this method never seemed to charge the device once i had this problem). Anyways i must've done something right (or not!:silly as i tried it again but today there must've been some charge applied as it flashed on the second attempt i tried (the first resulted in another aborted flash) it flashed my T no problem!:good:
thank you guys!:laugh:
Glad it worked out for you.
But you activated USB-Debugging before your phone started looping right?
Sent from my LT30p using xda app-developers app
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Try the safe mode,keep pressing vol down with power until the phone boot completely.
If the phone boot to safe mode than do a factory reset.
Sent from my C6602 using xda premium
GeertNool said:
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Click to expand...
Click to collapse
Welcome to XDA
you should go to the recovery thread in my signature. Read the first 2 posts.
Hope you recover your phone.
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
al3xwhite said:
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
Click to expand...
Click to collapse
Yes.
When the battery dies the phone should reset itself.
After the loops end plug into a charger, not pc for now.
You should get a red led indicating low battery level charging is working.
After the red led you may get Sony boot screen or bootloops.
If you get Sony and then the charging battery icon, then charge to over 50%. Then use pc companion or flashtool to restore.
If you get bootloops then read my 2nd post from the recovery thread in my signature for bootloop tricks.
Please let me know if it works. I am looking to add the Xperia Z to my recovery guide.
If there are any questions about my guide please ask in that thread.
Thanks
From Jaramie's LT28at
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
vaud27 said:
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
Click to expand...
Click to collapse
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
gm007 said:
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
vaud27 said:
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
Click to expand...
Click to collapse
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Check schaggo post up^^^^
Sent from my C6602 using xda premium
gm007 said:
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i will try to flash it using flashtool. thanks for your help mate
had the same problem and i managed to fix it just showing sony sign by installing the sony update programme on the sony update website
all you do is put phone into flashboot mode.
on mine i had to hold up and power button untill it vibrates 3 times then press down volume button to get it into flashboot mode
takes a few atempts but it worked.
takes around 20 mins to download then install another 10.
i couldnt get flashtool to flash firmware as my phone is locked on 3 mobile firmware locked bootloader
i hope this helps you
update:
schaggo method works. i can breath now. thanks to @gm007
This worked great for unbricking mine !!
P.S. don't waste time for Sony's Emma flash, they do not send login credentials in real time, site says they do manual user validation ...
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
AW: [Q] Xperia Z possible brick
racht said:
...don't waste time for Sony's Emma flash, they do not send login credentials in real time...
Click to expand...
Click to collapse
They never will. Read the instructions which come with EMMA. I have it working fine, officially, without any credentials.
flashtool not flash the phone
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
[email protected] said:
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
[email protected] said:
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
It probably means your battery was low.
From my Xperia LT28at ION
gm007 said:
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for response. Finally flashtool 0.9.10.1b works for me!
Returning to stock
Hey guys,
I've flashed [ROM][JB 4.2.2][CM10.1][AOKP-MR1][PananoidAndroid 3.15] PAC v22.1.1 - Update: 0508 from http://forum.xda-developers.com/showthread.php?t=2208249&page=65. It's working, but I'd like to try another ROM, specifically Xperia Z Revolution™ from http://forum.xda-developers.com/showthread.php?t=2175903. This requires to install stock 10.1.A.1.434 firstly So I downloaded C6603_10.1.A.1.434_Generic DE, NL, world. Flashing with Flashtools 0.9.10.1 always stucks at 0%.
BL unlocked. Does anyone have any idea how to get stock 434 in the phone? Originally there were older one 10.1.A.1.340, if it's somehow important to know...
I rooted my z1s today, then i installed recovery then flashed the rom for our phone made by tactic, all was well but everytime i booted the phone it always said android is upgrading, then it went through all the apps, so i thought why don't i just wipe system cache data and dalvik, then install the rom again, big mistake at first it booted to the sony logo got stuck, i kept turning it off then on 3 times, then after that i just went into flash mode with the led turning blue, after that i turned it off to save battery because i didn't download the ftf and flashtool yet, so after all that is downloaded i try to go into that mode again by plugging it into my computer then volume up and power but then it shows a red led for a brief second then stays black screen, not on ithink. When plugged into my computer it shows usb device not recognized so the phone is still alive. so my question is, what can i do to save my phone? pleeease help :crying: and yes i kind of literally cried
LaosPerson said:
I rooted my z1s today, then i installed recovery then flashed the rom for our phone made by tactic, all was well but everytime i booted the phone it always said android is upgrading, then it went through all the apps, so i thought why don't i just wipe system cache data and dalvik, then install the rom again, big mistake at first it booted to the sony logo got stuck, i kept turning it off then on 3 times, then after that i just went into flash mode with the led turning blue, after that i turned it off to save battery because i didn't download the ftf and flashtool yet, so after all that is downloaded i try to go into that mode again by plugging it into my computer then volume up and power but then it shows a red led for a brief second then stays black screen, not on ithink. When plugged into my computer it shows usb device not recognized so the phone is still alive. so my question is, what can i do to save my phone? pleeease help :crying: and yes i kind of literally cried
Click to expand...
Click to collapse
You wiped the system and then wonder why there is no system?
Just repair your phone using pccompanion to get back to stock
Or
Flash a Z1S FTF using flashtool.
Then, spend some reading the threads and learning what to do before blindly flashing and wiping stuff.
gregbradley said:
You wiped the system and then wonder why there is no system?
Just repair your phone using pccompanion to get back to stock
Or
Flash a Z1S FTF using flashtool.
Then, spend some reading the threads and learning what to do before blindly flashing and wiping stuff.
Click to expand...
Click to collapse
I can't get pc companion or flash tool to read my phone, when it's connected to my computer it says usb device not recognized, but my phone still is alive but no display either
LaosPerson said:
I can't get pc companion or flash tool to read my phone, when it's connected to my computer it says usb device not recognized, but my phone still is alive but no display either
Click to expand...
Click to collapse
Have you tried using them yet?
In your last post you say you have not even downloaded flashtool yet?
Download it, run driver.exe from the driver folder in the installation path. Choose flashmode, fastboot and Z1 drivers
then run flashtool and attach the phone with it turned on.
Detach the phone
Attach the phone again in flashmode.
Please post the log from flashtool here
gregbradley said:
Have you tried using them yet?
In your last post you say you have not even downloaded flashtool yet?
Download it, run driver.exe from the driver folder in the installation path. Choose flashmode, fastboot and Z1 drivers
then run flashtool and attach the phone with it turned on.
Detach the phone
Attach the phone again in flashmode.
Please post the log from flashtool here
Click to expand...
Click to collapse
My phone doesn't even shutoff, no vibrations etc, just the computer saying device not recognized, and the phone was unplugged while trying to turn it off
flash tool also says device disconnected? and i can't upload the log file
Press and hold the power and volume up until it vibrates 3 times. Then it is off.
Just copy and paste the window from flashtool here.
LaosPerson said:
My phone doesn't even shutoff, no vibrations etc, just the computer saying device not recognized, and the phone was unplugged while trying to turn it off
flash tool also says device disconnected? and i can't upload the log file
Click to expand...
Click to collapse
i changed it to zip file but the log is inside
gregbradley said:
Press and hold the power and volume up until it vibrates 3 times. Then it is off.
Just copy and paste the window from flashtool here.
Click to expand...
Click to collapse
i tried that, doesn't work
Try it again, that should ALWAYS work, no matter what.
How long are you holding them both for?
Press and hold both of them at the same time
gregbradley said:
Try it again, that should ALWAYS work, no matter what.
How long are you holding them both for?
Press and hold both of them at the same time
Click to expand...
Click to collapse
i pressed it for at least 5 seconds, and both
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
LaosPerson said:
...so i shut it off then went into flash mode with the blue led then i turned it off from there then when...:
Click to expand...
Click to collapse
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
gregbradley said:
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
Click to expand...
Click to collapse
these don't work anymore for some reason, and again windows reognizes the device but doesn't know what it is
time to wrry, it doesn't work the vol up and power after a minute
HELP DEVICE OCNNECTED IN FLASH MODE WHAT DO I EXCLUDE IN THE FLASH ?
NVM I JUST LET it wiothout excluding anything wishh me luck
gregbradley said:
Press it for much longer. If you get to one minutes and it has not worked then we can worry
Also, after seeing your numerous posts all over the forum I see another issue
Blue LED means fastboot, for flashmode you need a green LED
Press volume down for flashmode and volume up for fastboot.
Click to expand...
Click to collapse
there's around 2000 files it's sending to my phone, is it normal
OMG YESSS MY PHONE STARTED :victory::victory::victory::victory:
Love you greg, thanks for always coming on xda arouund this time
No worries, My boss is not yet in at work
gregbradley said:
No worries, My boss is not yet in at work
Click to expand...
Click to collapse
HEHEHEH what helped me was telling me to hold the vol up and power for a minutes, i went further to like almost two minutes and after that i started stabbing the red button next to the sim card with a toothpick LOL
Hey guys,
A while back I tried to root my Xperia T and putting CWM on it. Something went wrong and I don't exactly know what. It went into a boot loop.
Every time it starts up, the LED turns purple for a couple of seconds and it reboots again. I waited for the battery to drain and honestly forgot about it.
Now i found it again and i want to get it out of the boot loop. The wierd thing is that I can get into ClockWorkMod recovery but nothing else. When in startup and I push VOL- it goes into CWM without a problem. It's like the normal firmware is missing and it can only get into CWM. Is this possible?
And i am trying to flash the stock firmware on it. But when i try to connect with my pc (drivers an flashtool in place and working) it doesn't really seem to connect. It worked 1 time out of the last 5 tries. But when i tried to flash, it said ERROR. The phone get's the blue LED when i connect it. but this only workes if my timing is exactly right in the boot loop. I will try to manage it again to get some screenshots.
I'll update when i have screenshots and everything (with the proper ERROR code)
In the meantime, does anyone have any clue of what is going on?
Thanks:good:,
Flip
flipster112 said:
Hey guys,
A while back I tried to root my Xperia T and putting CWM on it. Something went wrong and I don't exactly know what. It went into a boot loop.
Every time it starts up, the LED turns purple for a couple of seconds and it reboots again. I waited for the battery to drain and honestly forgot about it.
Now i found it again and i want to get it out of the boot loop. The wierd thing is that I can get into ClockWorkMod recovery but nothing else. When in startup and I push VOL- it goes into CWM without a problem. It's like the normal firmware is missing and it can only get into CWM. Is this possible?
And i am trying to flash the stock firmware on it. But when i try to connect with my pc (drivers an flashtool in place and working) it doesn't really seem to connect. It worked 1 time out of the last 5 tries. But when i tried to flash, it said ERROR. The phone get's the blue LED when i connect it. but this only workes if my timing is exactly right in the boot loop. I will try to manage it again to get some screenshots.
I'll update when i have screenshots and everything (with the proper ERROR code)
In the meantime, does anyone have any clue of what is going on?
Thanks:good:,
Flip
Click to expand...
Click to collapse
Blue LED means you're in Fastboot mode, you need to put it into Flashmode (green LED) for it to work. If Vol Down puts it into Fastboot mode, then Vol Up would put it in Flashmode (I assume). Considering you're talking about timing, then it seems you don't know how to put it into Fastboot/Flash mode properly.
1.- Turn off your phone.
2.- Connect the USB cable to your computer
3.- Open Flashtool
4.- Press down the corresponding volume button (keep it pressed), and connect USB cable to your phone
Alternatively, you could also connect your sdcard to your computer and copy a flashable ROM to it, then flash it in recovery. It seems your /system partition/folder is either incomplete or damaged.
Antiga Prime said:
Blue LED means you're in Fastboot mode, you need to put it into Flashmode (green LED) for it to work. If Vol Down puts it into Fastboot mode, then Vol Up would put it in Flashmode (I assume). Considering you're talking about timing, then it seems you don't know how to put it into Fastboot/Flash mode properly.
1.- Turn off your phone.
2.- Connect the USB cable to your computer
3.- Open Flashtool
4.- Press down the corresponding volume button (keep it pressed), and connect USB cable to your phone
Alternatively, you could also connect your sdcard to your computer and copy a flashable ROM to it, then flash it in recovery. It seems your /system partition/folder is either incomplete or damaged.
Click to expand...
Click to collapse
Hey,
thanks for the reply.
The problem is that i can't turn the phone off. The only way it stays off is when the battery is dead. Like it is now. I have just tried what you said. VOL- gives the green LED for flashmode. But even when it is in flashmode and connected with my pc(pc also said it's connected) it keeps rebooting. So the connection switches on and of every 30 seconds or so. I found out that there was a wrong file in the flashtool firmware folder. after trying to flash the standard firmware it tried to do something else. I've removed the file and set it up right.
When it was connected (green light and everything) I got this;
"09/025/2014 17:25:27 - ERROR - (Bundle.java:440) - Cannot delete C:\Flashtool\.\firmwares\prepared\system.sin"
"09/025/2014 17:25:39 - ERROR - (Bundle.java:440) - Cannot delete C:\Flashtool\.\firmwares\prepared\system.sin"
And that was all. I will try again in a few minutes, but maybe I missed something.
[EDIT]
Tried a few more times. VOL- to flashmode, connected with pc. Flashtool starts loading the green bar.
After a couple of minutes it stops and Flashtool says this:
09/021/2014 18:21:11 - ERROR - (X10flash.java:523) - Read error :31 : Een apparaat dat op het systeem is aangesloten, werkt niet.
09/021/2014 18:21:11 - ERROR - (X10flash.java:524) - Error flashing. Aborted
(Een apparaat dat op het systeem is aangesloten, werkt niet. -> English -> The device that is connected to the system, doesn't work.)
And the thing that irritates me most of all is the X10flash.java:52.. part. Why does it say X10flash when a Xperia T lt30p is connected en i'm trying to flash LT30_9.2.A.1.205_CH or LT30p_9.2.A.0.295_Generic IT.
I can't wrap my head around it.
I put some attachments in here so you can see what I see. Can someone see what I'm doing wrong or not doing at all?
I seriously do not know how or why. But i did it. Flashtool did not give a log or anything(with previous phones i saw a long list.) it looked like it did not do anything. but the phone is booting into android as we speak!
Thanks for the help Antiga Prime! not a lot, but enough!:laugh:
Now i need to find out how to delete all thisXD
Take the battery out and in, then leave it connected to the charger for one full day, don't do anything with it.
Xperia T doesn't let you take out the battery that easy. But it's fixed. I just need to know how to delete this thread
Sent from my C6903 using XDA Free mobile app
I have a Z3+ Dual, yesterday it just went blank, I was listening to music and suddenly the screen went off and the music also stopped. I thought it was a random reboot so I waited but nothing happened. I just pushed the power+volume up key to shut it down. It vibrated for three times and that's it. When I tried to turn it back on nothing happened. Still now I'm pushing the keys to try and make it work and still nothing. When I try to connect it with my computer nothing happens,
The flastool says
"Device Connected in USB Debugging Off
For 2011 Devices Please make sure it is not connected in MTP mode"
That's it.
I'M REALLY WORRIED. PLEASE HELP ME.
ROM : Stock .253
Kernel : Zach's Kernel Playground
Recent Install : Amplify
I forgot to mention one thing, the back of the phone is warm which indicates that the processor is doing something..
Kindly Give a reply, it'll at least keep me from panicking :-|
njaya95 said:
I forgot to mention one thing, the back of the phone is warm which indicates that the processor is doing something..
Kindly Give a reply, it'll at least keep me from panicking :-|
Click to expand...
Click to collapse
Reflash it with the latest ftf and see what happens
first: press power and vol up to force switch off
2nd: use flashtool to reinstal firmware
note: when flashtool ask to connect you phone (while phone is off), hold vol down and plug usb, hold vol down till the "connect phone" window disappear
I don't think it'll work, cause it's BRICKED.