Database Develop

[Q] am having CM7 (nightly20) &Novav11 kernel. CAN I OVERCLOCK???...if so, how??

am running the latest CM7 release for the black and also the latest NOVA kernel. my question is
"CAN I OVERCLOCK???...IF SO, HOW EXACTY???"....can any of you great guys give me some detailed information on how to overclock the black EXACTLY????..awaiting your response eagerly.
P.S.-> i used the search tool but i didn't find the step by step guide for overclocking CM7 Op. Black. so, please don't flame if i reposted

You can't find it, because it doesn't exist yet. If you had read the nova kernel thread past few pages, aprold already mentioned that he is working over it but hasn't succeeded yet.
So, the only way till now is NOVA ROM (froyo), which supports the overclocking.

achyut said:
am running the latest CM7 release for the black and also the latest NOVA kernel. my question is
"CAN I OVERCLOCK???...IF SO, HOW EXACTY???"....can any of you great guys give me some detailed information on how to overclock the black EXACTLY????..awaiting your response eagerly.
P.S.-> i used the search tool but i didn't find the step by step guide for overclocking CM7 Op. Black. so, please don't flame if i reposted
Click to expand...
Click to collapse
I'm about to upgrade my old-stock rom to NOVA. But a little confusing about it. Maybe anyone can help me
when I want to upgrade rom to Nova V11, what firmware do should I use?
I read from posts that nova based on stock rom but in this thread says that nova can use CM#20 nightly firmware..

cuprum12 said:
I'm about to upgrade my old-stock rom to NOVA. But a little confusing about it. Maybe anyone can help me
when I want to upgrade rom to Nova V11, what firmware do should I use?
I read from posts that nova based on stock rom but in this thread says that nova can use CM#20 nightly firmware..
Click to expand...
Click to collapse
You are confused with NovaROM and NovaKERNEL. The latter is a kernel for CM7. Please always read the thread tittle and OP. It will indicate what it is, what they are, and what they are for.
Sent from my LG-P970 using xda premium

gabwerkz said:
You are confused with NovaROM and NovaKERNEL. The latter is a kernel for CM7. Please always read the thread tittle and OP. It will indicate what it is, what they are, and what they are for.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
ooh, I seems about to get it.
so if I want to use NOVA ROM, what I need is just kernel for NOVA V11?
I mean, in recovery mod, I just choose the NOVA zip after factory reset and wipe cache?
if so CM#20 is kernel for CM7 do i still need to put that CM#20 in my sdcard and choose it on recovery?
IMO, when I wipe all data and partition cache, then Nova Kernel will have no firmware, 'cause when I download nova kernel, it's just 5MB but the CM#20 is 100MB. and when i see inside the zip, CM#20 contain app,bin,etc,framework,font,lib,media,tts,usr,vendor,xbin. but in Nova just contain app,bin,etc,lib,xbin.

cuprum12 said:
ooh, I seems about to get it.
so if I want to use NOVA ROM, what I need is just kernel for NOVA V11?
I mean, in recovery mod, I just choose the NOVA zip after factory reset and wipe cache?
if so CM#20 is kernel for CM7 do i still need to put that CM#20 in my sdcard and choose it on recovery?
IMO, when I wipe all data and partition cache, then Nova Kernel will have no firmware, 'cause when I download nova kernel, it's just 5MB but the CM#20 is 100MB. and when i see inside the zip, CM#20 contain app,bin,etc,framework,font,lib,media,tts,usr,vendor,xbin. but in Nova just contain app,bin,etc,lib,xbin.
Click to expand...
Click to collapse
u r all messed up!!!!....in a summary:
1. NOVA V8 is a ROM.
2. NOVA KERNEL (latest V11) is NOT for the NOVA OR STOCK ROM...it is for CM#20 nightly build.
3. In Stock ROM, u can flash another kernel called "QUASAR" kernel.
now, for applying a kernel, u need to flash the ROM FIRST and then FLASH THE KERNEL. u don't need to do a factory reset if u flash a kernel but u should do a factory reset if u flash a ROM....
hope this helps

cuprum12 said:
ooh, I seems about to get it.
so if I want to use NOVA ROM, what I need is just kernel for NOVA V11?
I mean, in recovery mod, I just choose the NOVA zip after factory reset and wipe cache?
if so CM#20 is kernel for CM7 do i still need to put that CM#20 in my sdcard and choose it on recovery?
IMO, when I wipe all data and partition cache, then Nova Kernel will have no firmware, 'cause when I download nova kernel, it's just 5MB but the CM#20 is 100MB. and when i see inside the zip, CM#20 contain app,bin,etc,framework,font,lib,media,tts,usr,vendor,xbin. but in Nova just contain app,bin,etc,lib,xbin.
Click to expand...
Click to collapse
Ah my friend, you still don't get it. Let me put it this way
(NovaROM (NovaV8) / CM7 nightly#20 / LG Stock 2.2 Froyo) = are ROMs
(Quasar (NovaROMv8) / NovaKERNEL v11) = are KERNELS
Nova v8 (ROM) contains a custom KERNEL called Quasar, and it is based on stock 2.2 Froyo. All-in-One.
CyanogenMod 7 (CM7) is Gingerbread AOSP based. It has Nightly#0-#20 and few RC0 compiled by members. We have custom KERNELS for it, NovaKERNEL v1-v11, HuexxxKERNEL v1-v4.
In short, NOVAKERNELS SHOULD ONLY BE USED with CM7 and in some instances with stock Gingerbread (Tested with V20a, V20l, Marquee). You cannot combine NOVAKERNEL with NOVA8 (ROM). Please read more what's the difference of ROM and KERNEL.

cuprum12 said:
ooh, I seems about to get it.
so if I want to use NOVA ROM, what I need is just kernel for NOVA V11?
I mean, in recovery mod, I just choose the NOVA zip after factory reset and wipe cache?
if so CM#20 is kernel for CM7 do i still need to put that CM#20 in my sdcard and choose it on recovery?
IMO, when I wipe all data and partition cache, then Nova Kernel will have no firmware, 'cause when I download nova kernel, it's just 5MB but the CM#20 is 100MB. and when i see inside the zip, CM#20 contain app,bin,etc,framework,font,lib,media,tts,usr,vendor,xbin. but in Nova just contain app,bin,etc,lib,xbin.
Click to expand...
Click to collapse
ROMs :
- CM7 (#0-#20 is the version)
- Nova 2.2 v8
- official stock
KERNELs :
- Quasar kernel
- Nova kernel
Hope it helps
Edit :
Hey,gabwerkz is fast, i don't see ur comment when i type these
Sent from my heart into yours

agent205 said:
ROMs :
- CM7 (#0-#20 is the version)
- Nova 2.2 v8
- official stock
KERNELs :
- Quasar kernel
- Nova kernel
Hope it helps
Edit :
Hey,gabwerkz is fast, i don't see ur comment when i type these
Sent from my heart into yours
Click to expand...
Click to collapse
Haha! As long as they help, mine or yours, same or not would be ok. Till he gets it, the idea of it.

ahh...
finally got a crystal clear there
thanks all for your kindness
love this forum

Looks like with NOVA KERNEL V12 you'll can Overclock

yes...let's hope so :\

Yes you can expect the feature on v12 but be patient
Sent from my LG-P970 using Tapatalk

If you have the knowledge you could always compile something yourself, but I guess very few of us do so I recommend waiting for the upcoming V12 version of the kernel wich is said to have the overclock feature.

[q] help installing rocket rom

hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.

abhi29021992 said:
hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.
Click to expand...
Click to collapse
Go back in recovery, wipe data/factory reset, wipe cache and dalvik cache, reflash the rom and reboot, that should do it

it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?

abhi29021992 said:
it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?
Click to expand...
Click to collapse
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up

gee2012 said:
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up
Click to expand...
Click to collapse
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?

abhi29021992 said:
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?
Click to expand...
Click to collapse
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.

jambamkin said:
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.
Click to expand...
Click to collapse
Thnx ...........

Moved To Q&A​
Please post all questions in the Q&A section​

[Q] Dark Knight V4

V4 was released today and I have the following questions:
1) Download link not working
2) Does the modem have better wifi reception
3) Are there any included launchers
Thanks

1) http://www.mediafire.com/?3d6da7j5i306v7u - That link works.
2) Test different modems and see which you get the best with, at the minute my best is JVU.
3) Probably not, check? Also you can get more from the market / on here.

Charis.sh said:
V4 was released today and I have the following questions:
1) Download link not working
2) Does the modem have better wifi reception
3) Are there any included launchers
Thanks
Click to expand...
Click to collapse
2. All Dark Knight Roms got no Modem pre installed. If you got a modem, u will keep it after flashing from ur earlier installations.
3. Try Nova Launcher or Apex Launcher from market.
Dark Knight rom got an pre installed Nova Launcher and this one runs very smooth (except the sporadic rom bugs )

TV
someone can say if digital tv is working in dark knight 4?

Schlabbernr1 said:
2. All Dark Knight Roms got no Modem pre installed. If you got a modem, u will keep it after flashing from ur earlier installations.
3. Try Nova Launcher or Apex Launcher from market.
Dark Knight rom got an pre installed Nova Launcher and this one runs very smooth (except the sporadic rom bugs )
Click to expand...
Click to collapse
In this case how can I flash KB3 and where can I find it?
Also would you suggest formatting to ext4 and how should I do it so that I don't lose anything?

Hey guys, i flashed V4 and now my phone is stuck at the bootanimation (i had it booting for 20 min). I did a full wipe, wiped cache, wiped dalvik and even tried to reflash. Any suggestions?
edit: i got it working after 3rd reflash

I didnot like it.....

My suggestion: wait for an update
I have tried switching from V3 to V4 yesterday. I encountered problems with Titanium and GPlay kept FCing so I returned to my backup of the stable V3.
V4 was rushed out so I´m waiting for the next update.

Charis.sh said:
I have tried switching from V3 to V4 yesterday. I encountered problems with Titanium and GPlay kept FCing so I returned to my backup of the stable V3.
V4 was rushed out so I´m waiting for the next update.
Click to expand...
Click to collapse
Did you directly flash the ROM ? In that case you may face FCs often.
Better take a nandroid backup.
wipe cache and data
flash the rom
Rebot and let the phone start
Go to recovery and then from backuo and restore -> advanced restore -> select the backup you did -> restore data
I moved from Elite V7.1 to Dark Knight 4 and dint face any such issues.

in my case titanium crashed while restoring and couldn't complete the process.I think I'll stay on gb rom all the way till a gb-stable-and-smooth- like ics rom comes out.

twisturandroid said:
Did you directly flash the ROM ? In that case you may face FCs often.
Better take a nandroid backup.
wipe cache and data
flash the rom
Rebot and let the phone start
Go to recovery and then from backuo and restore -> advanced restore -> select the backup you did -> restore data
I moved from Elite V7.1 to Dark Knight 4 and dint face any such issues.
Click to expand...
Click to collapse
I did a backup of DK V3 to which I returned.
I wiped dalvic cache, data and cache and then flashed. I will try again and see what happens

i have a SGS i90000b with ics 4.0.4 CYANO XI.I
i wanna use this ROM from dark knight and i need to know if i can just instal from CWM without chance my kernel or i need install other kernel too?
if i need chance what kernel i have to use?

marcospbs said:
i have a SGS i90000b with ics 4.0.4 CYANO XI.I
i wanna use this ROM from dark knight and i need to know if i can just instal from CWM without chance my kernel or i need install other kernel too?
if i need chance what kernel i have to use?
Click to expand...
Click to collapse
I think it includes the devil kernel because I when i flashed V3 over stock ROM it changed to Devil Kernel

Stability
I can confirm that Dark Knight v.3 is much more stable than v.4.
Upgrading to v.4 I found these bugs:
1) After the first reboot I activated the wi-fi toogle and it started to switch on and off repeatedly. The system error that appears every time forces you to reboot the device.
2) Many users reported problems with titanium backup (I didn't try it)
3) Trying to move an application to USB (SD) causes a hotboot ( !!!! )
4) The new "Dark Knight" application crashes if you try (f.ex.) to install a new theme or a new battery icon ... after this crash you can no more change the battery icon from the ROM control menu.
I upgraded from Dark Knight 3, wiping everything before flashing as recommended. I made a second try upgrading from the original gingerbread 2.3.3 by Samsung (and wiping everything of course). The result was the same in both cases.

Stable DK4
If someone has flashed a stable DK V4 pls post the procedure that you have performed

Thought of going after this rom. But its better to wait for some better version in future with lesser bugs
Sent from my GT-I9000 using Tapatalk

verma_nis said:
Thought of going after this rom. But its better to wait for some better version in future with lesser bugs
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Agree, this v4 versión is near to unusable for now, hope next version will be much better

[Q] Bootloop after installing ALL-in-1 Mod for Stock ROM **Update 5**

hi guys ,
i need some advice on how to solve this boot loop.
i am on [ROM] [Stock] [Nims 11 Kernel] S'Perience ROM ® [21-09-2012] and after installation 1st reboot , i flashed ALL-in-1 Mod for Stock ROM **Update 5** and reboot. Everything seems fine when i was changing the settings for status bar. problem came right after i set the lockscreen type to Epic and bootloop start once i tried to turn on the lockcreen and then after.
i tried to used the scipt to wipe the dalvik cache from CronMod int2ex as Sperience rom is using it. but doesnt help.
Pls kindly advice me on how to integrate ALL-in-1 Mod to the latest S'Perience ROM ® [21-09-2012] ,
thanks alot and i appreciate it.
cheers

are you sure the mod supports the baseband on which the rom is based?
Insert witty sentence here

that will screw The Framework Of The Rom ... It will screw the 14 toggles because of lidroid ... will screw as hell your system because of dalvyk cache!

[Q] Kernel issue???

Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(

andywang02021 said:
Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(
Click to expand...
Click to collapse
flash sharp rom or andro-id rc3 via sutlr you will get new baseband for newer 35.7 kernel,, and than you can flash any rom or any 35.7 base kernel..

andywang02021 said:
Hi porters, I think I am at my wits end...I have a spice mi410 (a variant of the ideos x6) and i've been pretty sick of gingerbread... want to flash ics. So far only edowar's ics a4 worked... The rest, including icecoldsandwich, miui v4.... after flashing, just gets stuck on the "android technology" boot screen... I've done everything right, including restoring from nb0, installing cwm, wipe data, cache, dalvik, even the /system itself..... i think might be kernel issue, anything other than 2.6.32 never worked. i'm lucky that edowar's a4 is on .32, but i wanted to flash miuiv4 badly. any good advice??? :'(
Click to expand...
Click to collapse
As abenagiel said, it's very simple.
Try to find SUT LR setup in the forum, install it, then download RC3 by TJ style, flash it through SUT LR, then download MIUI V4 by RCSET, posted by COMDEVX in development section, flash that through recovery and enjoy .......

abenagiel said:
flash sharp rom or andro-id rc3 via sutlr you will get new baseband for newer 35.7 kernel,, and than you can flash any rom or any 35.7 base kernel..
Click to expand...
Click to collapse
vivekb said:
As abenagiel said, it's very simple.
Try to find SUT LR setup in the forum, install it, then download RC3 by TJ style, flash it through SUT LR, then download MIUI V4 by RCSET, posted by COMDEVX in development section, flash that through recovery and enjoy .......
Click to expand...
Click to collapse
Thanks! I'll try it when exams are over...
You guys are awesome, thanks for your help
EDIT: HI. Got spare time to flash... It worked! I feel so stubborn....Yeah I'm a newbie in android. Thanks guys!

Help
Hi to All
I want to use a rom with diffrent kernel version to diffrent kernel version
For eg MT has a stable ICS Rom with Kernel 2.6.32.59. I want to use it with either 2.6.32.9 or 2.6.35.7.
What are the changes I need to made if t is possible?
Please share your views
Thanks

Tanuj Chhibber said:
Hi to All
I want to use a rom with diffrent kernel version to diffrent kernel version
For eg MT has a stable ICS Rom with Kernel 2.6.32.59. I want to use it with either 2.6.32.9 or 2.6.35.7.
What are the changes I need to made if t is possible?
Please share your views
Thanks
Click to expand...
Click to collapse
see this link http://forum.xda-developers.com/showthread.php?t=1923298

elol said:
see this link http://forum.xda-developers.com/showthread.php?t=1923298
Click to expand...
Click to collapse
Rom is flashed but touch screen is not working what should I do?
Mt rom is based on kernal 2.6.32.59