Database Develop

factory reset "invalid argument" ?

This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.

forcedv said:
This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.
Click to expand...
Click to collapse
Hi, i have exactly the same problem.
With the invalid argument problems on data/factory reset, and the download unsucessfull problem! i have reflashed 4times JM1 on my phone !!!
i give 25$ for someone who solve the problem !

The way I fixed this problem was in two steps.
I used the Kies registry hack (someone here has created a program (which I can't find a link to right now) for windows that fools Kies to recognize your SGS as requiring an official firmware update).
Once your SGS is back on your official carrier firmware, Android market will work again.
From there, I was able to do a proper factory reset, followed by installing Draky's 7 Rom, using the 3 button combo and update zip method......and till now it's all good.
My SGS went from being a useless paper weight, to a kick ass device.
Good luck.
*You mentioned JM1* you may not need to go back to that firmware, but whatever official carrier firmware that Kies updates your SGS to, should fix the market problem.

With the Internal SD Corrupted Fix, i have formated my internal SD and there is no invalid argument when i do a data/factory reset.
but i think this is another problem, i have tried anything.
The hang on installing/unistalling problem come when i add my Google Account on the Android Market.
After this, i can't install or unistall anything.. that show installing.... at the infinite.
(sry for my english)
i have created a new google account for re-downloading again applications on the market, but i'm really sad because i have bought a lot of with my other account! wtf...
can't someone have any ideas or can help me?
thanks!

[Q] SHW-M180S repartition successfull but with undesirable result...[SOLVED abit]

ok now that i sucesfully reparttioned my shw-m180s,
i have a tiny bit of problem on the internal sd card...
its not showing the 16gb storage,instead its 210mb size..
.i have now sucesfully collected all the files i need to flash and keep on reflashing,
but i cant find a way to successfully make the internal sd to gb
,instead it keeps goin back to the 210mb,
before i have the no internal sd card detected or error,
but it shows upfor a sec then gone,now its just 210mb,
anyone else who have this problem that successfully corrected the repartition process kindly guide me to make it to gb instead of just mb...
for those interested heres the file url links for you to use
stock SHW-M180S Files:
http://gadgetmodder.com/2012/11/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
Ice Cream Sandwich rom:
http://gadgetmodder.com/2012/11/gui...m180s-korean-anycall-tablet-to-android-4-0-4/
Theres another thread here on forums for the Jelly Bean system but i wouldnt suggest it coz i cant access the recovery mode but ill add the link too
Jelly Bean Rom Thread Link:
http://forum.xda-developers.com/showthread.php?t=2057050
this threads and files are not mine,i just looked hard to get these from all the sites i came across,thanks to them i can use my tab even with 210mb (^^,)

after many months of being stuck,
i have now successfully restored my internal to stock with some threads and files ive collected,
all came clear after 2 days ago,why? coz I was always partying and drinking lol
ok the trick is
1. enter download mode to flash m180s_4.1.2_CN_130109 tarball via odin 1.85
2. it be a constant loop in recovery choose advance option reparation sd card to settings u want
3. mount sd card to pc to check desired internal
4. clear all data cache dalvik etc if u can
5.enter download again to flash the rom that worked before,as for me im stuck with Jiwon ROM 2.0S Full
I cant retun to stock froyo,gb and rooted ics. the error still shows when im using those roms
now its what im working on,hope to fix it as soon as possible
and they say it cant be fixed lol, go prove them wrong (^_^)
heres a site with the files I used,credit goes to all to ones that shared it
http://main.develoid.com:81/samsung/Galaxy/Galaxy Tab/SHW-M180S/

site is moved
hi this site is moved to mobile-hub.net
here is the new links
4.0.4 ugrade is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
root guide is here http://mobile-hub.com/guide-how-to-root-samsung-shw-m180s-korean-anycall-tablet/
back to stock is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/

After Flash it shows E:failed to mount
After i flash my Samsung Galaxy Tab SHW M180S(B) with \HOME_M180S.UC27.2041_CL1058960_REV03_user_low_ship.tar.md5
and it seccessfully pass in Odin.but after reset it shows a error message like
E:Failed to mount /Cache (Invalid Argument) what should i do now......
E:failed to mount /data (Invalid argument)
E:failed to mount /cache (Invalid argument)
E:Can’t mount /cache/recovery/command
Checksum confirmation -> check(0)
Not need checksum confirmation
Already executed!!...
# MANUAL MODE #
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernal_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)

stock rom i have same result, only way to fix that is by jtag, the solution i found was to bring back the internal

[q] need a help

Hello mate u ok ?
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/201...jw4-value.html
Now i am trying to flash my phone through odin but when its finshed it* my phone shows some erorrs in red* coloures
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
Meida files copy failed
-- Deleting files...
E: failed to mount /dbdata (File exists)
E: delete_data_files: Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
--Updating filesystem...
E: failed to mount /dbdata (File exists)
E: discard_filesystem_for_rfs:Can't mount /dbdata
--Wiping cache...
Formatting /cache...
Cache wipe failed.
--Applying Multi-CSC...
Installing Multi-CSC
Applied the CDC-code 'CPW'
Successfully applied multi-CSC.
i also wipe factorty and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?

hi mate.
your problem is that you're trying to run a gingerbread rom, while you have an ICS/JB bootloader. the two use an entirely different partition scheme, so it's not finding the storage when it tries to access it. it seems to be a common occurrence, lots of people aren't aware that the two differ, when they're even aware that bootloaders exist.
if you look here : http://forum.xda-developers.com/showpost.php?p=37836094&postcount=2 , you'll find the solution i gave someone else that had that problem the other day.

to succesfuly downgrade from cm10 to stock GB you have to flash 3-file ROM with pit512 and re-partition checked.

You posted 2 topics the same
Answered : HERE

OH MY GOD LOL, ANOTHER ONE!
FLASH DBDATA.RFS AS PDA IN ODIN
AAAARRRGGGGHHHH!!!!!
Sent from my GT-I9000 using Tapatalk 2

[Q] Reinstalling stock firmware - stuck in boot loop

I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?

Amphibian59 said:
I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1640906

Amphibian59 said:
I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?
Click to expand...
Click to collapse
You should factory reset and wipe cache and dalvik cache partitions. If else fails, try flashing a different stock ROM.

gsstudios said:
You should factory reset and wipe cache and dalvik cache partitions. If else fails, try flashing a different stock ROM.
Click to expand...
Click to collapse
Thanks guys. Meanwhile I managed to track down the XXJVU ROM and now have the phone up and running again on Cyanogenmod 10.2.1. But despite wiping cache and Dalvik cache, and factory resetting, it is still rooted! There is no Superuser app but #Superuser is still in the settings menu, and my bank's app reports that it won't work because the phone is rooted. Very odd. I suppose I'll have to try a different stock ROM, but why doesn't root disappear when flashing a stock ROM?

TF701T partitions appear corrupted...HELP?

I stopped using my ASUS tablet a couple of years ago when internal memory started giving me trouble, but recently I started messing around with it again to see if I could get it working again. It appears that all partitions have no free space so that i cannot install a custom rom, fix anything, or really do anything. If I go to fastboot and try to force install a new recovery or new rom or anything it looks like it works but it really doesn't. if I try to boot, I just go in a boot loop.
I got twrp to boot(can't get it to install) and it tells me when I try to fix the partitions that they have 0 space?
Anyone have a tool or know the steps to delete and recreate ALL the partitions for the TF701t(K00C)? Any help would be appreciated.
I've tried twrp fix partitions, I've tried it's resizing as well. I've tried to install a stock rom, hoping it would rewrite them. nothing works.
Worse case is it possible to convince the tablet to just use an SD card as the internal storage and not use the emmc at all?

rkimbal45 said:
I stopped using my ASUS tablet a couple of years ago when internal memory started giving me trouble, but recently I started messing around with it again to see if I could get it working again. It appears that all partitions have no free space so that i cannot install a custom rom, fix anything, or really do anything. If I go to fastboot and try to force install a new recovery or new rom or anything it looks like it works but it really doesn't. if I try to boot, I just go in a boot loop.
I got twrp to boot(can't get it to install) and it tells me when I try to fix the partitions that they have 0 space?
Anyone have a tool or know the steps to delete and recreate ALL the partitions for the TF701t(K00C)? Any help would be appreciated.
I've tried twrp fix partitions, I've tried it's resizing as well. I've tried to install a stock rom, hoping it would rewrite them. nothing works.
Worse case is it possible to convince the tablet to just use an SD card as the internal storage and not use the emmc at all?
Click to expand...
Click to collapse
when I'm doing anything in recovery i also get the following kinds of messages
E: failed to mount / cache (Invalid Argument)
E: Can't mount / cache / recovery / log
E: Can't open / cache / recovery / log
E: failed to mount / cache (Invalid Argument)
E: Can't mount / cache / recovery / last_log
E: Can't open / cache / recovery / last_log
E: failed to mount / cache (Invalid Argument)
E: Can't mount / cache / recovery / last_install
E: Can't open / cache / recovery / last_install
E: failed to mount / cache (Invalid Argument)
I've seen a few posts with this issue, but not much in the way of resolutions.