When I'm in moboot and I select webos it gives me an error "boot failed" any help. Thanks.
I can boot fine into everything else by the way.
Sent from my SPH-D710 using XDA App
jarnail24 said:
When I'm in moboot and I select webos it gives me an error "boot failed" any help. Thanks.
I can boot fine into everything else by the way.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
You might have to doctor. After, reinstall moboot with Acmeinstaller, android should still be there. That's what I did. Good luck!
Should I just click webos recovery and doctor it?
Sent from my SPH-D710 using XDA App
If you have a good nandroid backup, you could try to do an advanced recovery from cwm
Restore boot only
May save you a visit to the doctor
Good luck
I don't have a nandroid and don't mind doctoring but I'm how should I doctor it. Should go to webos recovery and doctor it?
Sent from my SPH-D710 using XDA App
Hey I doctored it without deleting the android partition and now I can't log into webos. Its giving me an error pams9999
Sent from my SPH-D710 using XDA App
Related
I dont know what happen?!?! but my boot menu in moboot change by itself?? only I do is reistall one of my backup and reboot the HP, I see my boot menu on different order!!! original is WebOs,Aokp,CWM recovery, Hp recovery, reboot and shutdown. Now is CWM recovery,shutdown,Aokp,WebOs, reboot and HP recovery. Someone know how to fixed?!?!?
Sent from my PC36100 using Tapatalk 2
Does the change in order cause any issues? For example; now that ClockworkMod is the first entry while before it was WebOS, does selecting ClockworkMod cause your Touchpad to boot into WebOS?
No!!! everything work perfect!!! the only thing is the order!!! I just want to know why that happen!!! if any way to fixed!!! or keep like that!!!
Sent from my PC36100 using Tapatalk 2
My advice is that if isn't causing any true issues, then it's nothing to worry about. Best obsesses over it and just it as one of life's great mysteries. Also ... you may want to switch to decaf my friend or try to re-flash moboot.
ipzant said:
No!!! everything work perfect!!! the only thing is the order!!! I just want to know why that happen!!! if any way to fixed!!! or keep like that!!!
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
In webos, download and install Cyboot, from preware. You can set the booting order and also change the time to first boot.
I have a stock Android 2.3.6 galacy exhibit 4g and when I boot up into recovery, an update is automatically found, installed and then reboots the phone doing the same thing every time recovery is booted into. My problem is, I cannot find this update package in my internal sd storage to save my life nor do I even know what the update package would be called. Can anyone please help?
Sent from my SGH-T679 using xda app-developers app
korruptedimage said:
I have a stock Android 2.3.6 galacy exhibit 4g and when I boot up into recovery, an update is automatically found, installed and then reboots the phone doing the same thing every time recovery is booted into. My problem is, I cannot find this update package in my internal sd storage to save my life nor do I even know what the update package would be called. Can anyone please help?
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I'm not certain but it might be called update.zip, because if I remember that's the only name that will flash in the stock recovery. As for finding it, just try searching for update.zip. it should be on the root of the sdcard(no folder) because that's the only way I thought it could install. Any ways I'm probably wrong but at least you can try.
Sent from my Nexus 7 using xda app-developers app
theAPANT said:
I'm not certain but it might be called update.zip, because if I remember that's the only name that will flash in the stock recovery. As for finding it, just try searching for update.zip. it should be on the root of the sdcard(no folder) because that's the only way I thought it could install. Any ways I'm probably wrong but at least you can try.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i tried that too. it was unsuccessful. im almost out of ideas. does anyone have a clue about multi csc code that can automatically apply upon booting into stock recovery and then make it automatically reboot the phone?
This is exactly my problem. I just took a picture of it. this it what it says as soon as i boot into recovery. No options. Nothing. Just reboots
Sent from my SPH-D710 using xda premium
korruptedimage said:
This is exactly my problem. I just took a picture of it. this it what it says as soon as i boot into recovery. No options. Nothing. Just reboots
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sorry i thought it posted my picture with the link. only place i have to upload it is on facebook but heres the link. if anyone can help, please do.
http://www.facebook.com/photo.php?f...1306577752552.492490.664252551&type=3&theater
korruptedimage said:
i tried that too. it was unsuccessful. im almost out of ideas. does anyone have a clue about multi csc code that can automatically apply upon booting into stock recovery and then make it automatically reboot the phone?
Click to expand...
Click to collapse
I'm not sure really what CSC code is but I think your talking about stock Odin flash able package. That should get you back to stock and flash the stock recovery and wipe everything. However i think it will bootloop after it flashes so you will have to boot into recovery and wipe data. If so check out the wiki. There is all the info you need. I have another idea though. I haven't done this myself but you should be able to push a clockworkmod recovery.img to the phone from a terminal if you have adb also in the wiki. I can't view your pic because I don't have a Facebook but maybe someone else can. Good luck
Sent from my Nexus 7 using xda app-developers app
That is the stock update pushed by Samsung from what it sounds like. Also sounds like a data packet might have dropped during the downloading of it causing a bad install. For simplicity get cwm Installed and boot thru that and flash from cwm. Wiki has all the info needs.
Wiki please read completely on rooting and install of cwm. Suggest 6.0.1.2 version. Personal preferences on that.
http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
Sent from my SGH-T679 using xda premium
Problem solved. I just randimly pushed the 3 buttons on the phone before the rebooting part came up in the script and finally got the menu, took may tries to get to that point but as soon as I got to that point, I was quick to install clockworkmod successfully. Now problem is gone. Hope this thread maybe helps someone else
Sent from my SGH-T679 using xda app-developers app
korruptedimage said:
Problem solved. I just randimly pushed the 3 buttons on the phone before the rebooting part came up in the script and finally got the menu, took may tries to get to that point but as soon as I got to that point, I was quick to install clockworkmod successfully. Now problem is gone. Hope this thread maybe helps someone else
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I have a similar problem. Which 3 buttons are we talking about? Power+Home+VolUp?
Easiest way, take out battery, push volume up and power, insert battery while holding, when Samsung appears release only power, when the android guy with package appears press menu
Sent from my SGH-T679 using xda app-developers app
Make sure you push the "Menu" capacitive button (left in the row of four buttons below the screen) when you see the green Android guy and the box. That will get you into the stock recovery menu.
I had to reboot into recovery a couple of times because I missed that part. What a pain!
Long post but can't really shorten it.
32GB wifi Nexus, rooted and was running Liquid Smooth ROM and Motley kernel, went to update the ROM to rc9 version ,anytime I updated previously I never done full wipe unless using different ROM, anyway flashed the ROM and the gaaps with it and rebooted, immediately and prompted to me to use either apex or Holo HD I choose Holo HD got error saying system ui not responding, tried apex and got the same.
I was on the main screen but couldn't access it, yet I could pull down and enter into settings, everything else looked to be ok, so rebooted back to recovery and tried fixing permission, rebooted and got the same so I though I'll be just restore my nandroid backup, to my astonishment all the data had been wiped, I didn't do a wipe at all so I'm baffled how this happened.
Anyway I done a factory reset and rebooted and went through the setup, got the same system ui not responding, went to settings which could still access, apps and un installed both Apex and Holo HD noticed that Liquid Smooth rc9 had installed but instead of showing the cm kernel it still showed motley kernel.
Back to recovery, factory reset twice, wiped cache and dalvik, rebooted, went through set up process, same system ui error again, went to settings, erased all data, tablet rebooted, set up process same again, system ui, so I'm getting worried so back to recovery and this time I selected format system, data and sd, card and now I think I've completely fuc#ed it up as it just hangs at the Google screen and has stayed like that for over 30 minutes.
Previously asides from the occasional force close issue in the 2 months I've had the Nexus not really had a problem with it and whilst I'm no developer or techy geek I'm certainly no noob when it comes to this type of thing but I'm very concerned now and hoping someone can be of assistance as I sold laptop and primary just use my Nexus (and Galaxy S3)
Thanks
Sent from my GT-I9300 using xda app-developers app
Strange.. But I didn't understand well, after wiping /system, did you flash the ROM back ?
I think you should flash 4.2.1 factory image using toolkit or whatever, then root etc..again
No all the data had been wiped this is what is baffling me, I didn't do a factory reset I just flashed the ROM and gaaps, as I said initially it was the system ui error I was getting but I think I've fucjed it up by formatting the system, data and sd card as all I can see now is the Google screen at boot, I can still get into clock work mod recovery but I've exhausted all avenues as it were, is there any hope I can get it back working again?
Sent from my GT-I9300 using xda app-developers app
j3r3myp said:
Strange.. But I didn't understand well, after wiping /system, did you flash the ROM back ?
I think you should flash 4.2.1 factory image using toolkit or whatever, then root etc..again
Click to expand...
Click to collapse
Is that Mr skips Nexus 7 toolkit?
Sent from my GT-I9300 using xda app-developers app
Download Google Stock Image and Flash the System.img File ...Tablet will be fine after that.
manasgirdhar said:
Download Google Stock Image and Flash the System.img File ...Tablet will be fine after that.
Click to expand...
Click to collapse
Thanks can you give me more instructions how I go about doing that, any links, etc
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Is that Mr skips Nexus 7 toolkit?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes ! Really easy to use. You'll just have to put the tab into fastboot mode give it a try I'm pretty sure it will solve everything and you'll start back with good bases as it is full stock !
Sent from my Nexus 7 using Tapatalk HD
Cheers but I don't see anything in clockwork mod recovery for fastboot mode, I'll go to an Internet cafe tomorrow and do it if I could just get specific instructions.
Thanks again folks for your assistance
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Cheers but I don't see anything in clockwork mod recovery for fastboot mode, I'll go to an Internet cafe tomorrow and do it if I could just get specific instructions.
Thanks again folks for your assistance
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hold power and volume up and down all for like 10-15 seconds. Tablet will boot into bootloader/fastboot mode
Sent from my Nexus 7 using xda app-developers app
malikadnanm said:
Hold power and volume up and down all for like 10-15 seconds. Tablet will boot into bootloader/fastboot mode
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
That is what I've always done but all I can see is - start - restart bootloader - recovery mode - power off, and I cannot see anything for fastboot mode (unless I'm going blind)
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Thanks can you give me more instructions how I go about doing that, any links, etc
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
First Download and install the fastboot drivers...Download the stock Image here:-
https://developers.google.com/android/nexus/images
then hold volume-(Down) Button and while holding the Button power on the device..it will take you into the bootloader. Now conne4ct the nexus to your PC...Now extract the file you downloaded (the Stock image)..keep extracting the files till you get the system.img file.Use fastboot to flash that(the command):
fastboot flash system system.img
Boot into fast boot, push a stock image. Ta da. Easy stuff. The basics.
Sent from my A100 using xda app-developers app
manasgirdhar said:
First Download and install the fastboot drivers...Download the stock Image here:-
https://developers.google.com/android/nexus/images
then hold volume-(Down) Button and while holding the Button power on the device..it will take you into the bootloader. Now conne4ct the nexus to your PC...Now extract the file you downloaded (the Stock image)..keep extracting the files till you get the system.img file.Use fastboot to flash that(the command):
fastboot flash system system.img
Click to expand...
Click to collapse
Right cheers ill give this a go tomorrow pretty new to the Nexus used to Samsung
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Right cheers ill give this a go tomorrow pretty new to the Nexus used to Samsung
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ah..We were all new to this once..you will get the Hang of it..If you need further help please do let me know.Always happy to help.
So I tried to customize the moboot screen and replaced moboot.background.tga with one I made and now I can't boot into anything. No moboot, no android, no webos. Is there a way to reinstall with acmeinstaller. Someone was talking about using novaterm but I have no clue how to use it. Any advice? Oh and I get this error message: [90] panic (caller 0x500042e1): gfx_surface_blend: unimplemented color space combination (source 0 target 2)
Sent from my Galaxy Nexus using xda premium
Never mind I finally was able to get into USB mode and wiped with webos doctor and now reinstalling :thumbup:
Sent from my Galaxy Nexus using xda premium
syrum84 said:
Never mind I finally was able to get into USB mode and wiped with webos doctor and now reinstalling :thumbup:
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
did the moboot screen show up cuz when resetted mine it wouldnt go into moboot it would go straight to webos
sflecha35 said:
did the moboot screen show up cuz when resetted mine it wouldnt go into moboot it would go straight to webos
Click to expand...
Click to collapse
This happens because the doctor resets the boot partition, removing android and moboot
Sent from my ss_tenderloin using Tapatalk HD
Here is the problem: the phone is only able to boot in to cwm. I dont know what happened, but the system got wiped. The process of flashing a ROM goes well but when i reboot the system is wiped again and it boots into cwm.
Is there a way to solve this problem with the phone only, because i dont have the necessary programs on my laptop to solve this problem in a different way, and i wont be able to download them for another week. I do have adb on laptop but i dont know if it could help the situation.
Sent from my GT-I9070 using xda app-developers app
Try removing the battery then put it back in. Turn it on pressing power and volume up. In recovery choose reboot system.
Sent from my LG-P880 using Tapatalk 4
MilkyJoePD said:
Try removing the battery then put it back in. Turn it on pressing power and volume up. In recovery choose reboot system.
Sent from my LG-P880 using Tapatalk 4
Click to expand...
Click to collapse
Already did that, but the problem is that after reboot there isnt a system to boot into. So it boots in cwm.
Sent from my GT-I9070 using xda app-developers app
It might be different with this phone, but the phones I've had with a blank system didn't boot into recovery, you'd either get a boot loop or just a blank screen.
I've had the recovery boot loop before and the only way to get out of it was to boot into recovery manually (rather than let it boot into it itself). Which meant removing the battery for about 10 seconds, then making sure when you boot into recovery you initiate it before it does itself.
If it is a blank system then I'd suggest just trying to somehow get a ROM on your phone to flash.
Did you not make a nandroid?
Sent from my LG-P880 using Tapatalk 4
I tried to boot into recovery manually, but instead it booted into OS
Sent from my GT-I9070 using xda app-developers app
Recovery limbo solution should be stickied.
How many times will an unnecessary full wipe etc. be advised?
Sent from my LG-P880 using Tapatalk 4