Related
Im a Huge star wars fan and i would love to have this leaked boot animation ported to my vogue if anyone is willing to help me out i would be very grateful
i wish i know how to do it myself
for those that want the androidupdate i put one together the link is below http://www.megaupload.com/?d=DJV03Z6M
i have tested this on my own vogue and it works great
thank you Kallt_Kaffe for the resizing
here is the links to droidlife
http://www.droid-life.com/2010/09/08/download-official-r2-d2-droid-2-boot-animation/
and there are also leaked live wallpapers for anyone who wants them
http://www.droid-life.com/2010/09/08/download-leaked-r2-d2-live-wallpapers/
I'll have a look at the bootanimation. I have the resizing tools needed so it's usually a few commands at the command line.
Here you go... not tested though... resized to 240x427 then cropped to 240x320.
EDIT: Tested it on my QVGA Huawei U8100 and it worked just fine so it should work OK.
SWEET!!! thanks to you both
kallt_kaffe said:
Here you go... not tested though... resized to 240x427 then cropped to 240x320.
EDIT: Tested it on my QVGA Huawei U8100 and it worked just fine so it should work OK.[/uQUOTE]
Thank you
That was fast
Click to expand...
Click to collapse
I was try to make my own bootanimation for my own device. But it won't load during booting. Is there any compression or encryption method should i use when re package it to zip file ?
vellowax said:
I was try to make my own bootanimation for my own device. But it won't load during booting. Is there any compression or encryption method should i use when re package it to zip file ?
Click to expand...
Click to collapse
It's an uncompressed zip. More like an archive.
Thank you, I will try again later.
awesome, thanks OP and kallt_kaffe
edit: so where do I put this?
radar5 said:
awesome, thanks OP and kallt_kaffe
edit: so where do I put this?
Click to expand...
Click to collapse
if you use the update file i posted then put it on your sd card in the andboot file
then reset your phone and when you power on hold down the volume or d pad center
that will take you to the installer
from there pick number 4 install update
let it install
when its done you will be back at the install menu
then pick number 10
the phone will boot up and you should see the new boot animations
enjoy
evilclosetmonkeynate said:
if you use the update file i posted then put it on your sd card in the andboot file
then reset your phone and when you power on hold down the volume or d pad center
that will take you to the installer
from there pick number 4 install update
let it install
when its done you will be back at the install menu
then pick number 10
the phone will boot up and you should see the new boot animations
enjoy
Click to expand...
Click to collapse
thanks, I didn't realize that was the edited one. No access to mega upload at work though so this will have to wait until later.
Hey I downloaded the androidupdate.tar and I ran the update from the installer, but whenever I boot it just shows a blank screen
delivery_dragon said:
Hey I downloaded the androidupdate.tar and I ran the update from the installer, but whenever I boot it just shows a blank screen
Click to expand...
Click to collapse
it worked fine for me is anyone else having this problem
try running it again
Awesome thanks for this. Lovin seein good ol' R2 on boot
My Vogue is now really a droid
This ROM has been modified to Include The Data File for The Sims 3. Instructions are included with the download link.
XipherBUILD Rom
Flashing this rom will wipe your data (Not you internal SD Card) please make a backup of all your applications
This ROM is based on eugene373's Frankin-Twiz Rom and has the default theme, indicators and wallpaper. The changes have been to the boot sequence and the underlying system. I have also included many of the default Samsung Applications that were removed from Frankin-Twiz. A full list of changes follows.
XipherBUILD v.1.1:
~Added the TouchWiz Calendar
~Added AllShare fixed to be compatible with Frankin-Twiz
~Fully Deodexed OTA Release and ported application updates
~Corrected default permissions of /data/app applications on install
XipherBUILD v1.0:
~Included Root
~Included the I9000 Boot Splash
~Included a modified I9000 Shutdown sequence
~Included the JI6 OTA modem.bin for 3G & Reception Improvements
~Included LSB Fix for GPS to use MS Based Network Assistance from Google's Servers
~Included the Captivate Camera Application
~Included JAC's OC Kernel + Color Correction
~Installed the following Samsung Applications:
AmazonMP3
Audio Postcard
Samsung Calculator
Samsung MyFiles
Samsung MediaHub
Samsung Music Player
The Sims 3 Launcher (You will need to install the Sim3 Data Package As Well)
SlackerRadio
~Replaced Layar-samsung with the True Layar application from the market
~Included the ROM Manager (Free Version) and RyanZA's OCLF (Free Version)
~Other stuff I forgot about.....
This can be lag fixed with either the Voodoo Lagfix OR RyanZA's One Click Lag Fix!
************************************************************************************
UPDATED VERSION RELEASED 10/11/10 Download the XipherBUILD.v.1.1 (Sims 3 Included).zip from MultiUpload HERE
ORIGINAL VERSION RELEASED ON 10/10/10 Download the XipherBUILD.v.1.0 (Sims 3 Included).zip from MultiUpload HERE
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
************************************************************************************
Installation
1. Download the ROM Manager from the market as well as the RyanAZ's OCLF 2.0.
2. Open OCLF from the menu and install root. (Follow the instructions that the application gives you to enable root access)
3. Copy the file XipherBUILD.v.1.0.zip to your internal sd card.
4. Open the ROM Manager and click "Flash ClockworkMod Recovery" and select the Samsung Vibrant. When prompted allow root access.
5. Reboot into Recovery. The default Android recovery screen will appear, use the Volume Keys to move down to "reinstall packages" and kit the power key to select it. The phone will reboot into the ClockworkMod Recovery.
6. Using the vol- key move down and select "install zip from sdcard"
7. Using the vol- key move down and select "choose zip from sdcard"
8. Using the vol- key move down and select "XipherBUILD.v.1.0.zip"
9. Using the vol- key move down and select "Yes - Install xxxx"
The install will commence. Once done use the vol- key to select go back and then select "Reboot system Now"
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
Over clocking the CPU
Make sure to install SetCPU and adjust your CPU to 200mhz - 1200mhz to enable the over clocking of the processor. You can get SetCPU from the market or elsewhere on these forums.
Lag Fix Guides:
There are step by step instructions to apply either RyanZA's One Click Lag Fix, or the Voodoo Lag Fix
Only One Lag Fix Can Be Enabled At A Time
RyanZA's One Click Lag Fix
1. Open the application menu and select OCLF
2. Allow the application to have Root Access by selecting Allow
3. Install the EXT2 Tools
4. Apply the v.2.1+ Lag Fix and select a size of approx 1300mb
5. Wait until phone powers down and reboots.
Voodoo Lag Fix
1. Download the Voodoo lag fix from here project-voodoo.org Make sure that you download the Galaxy S Vibrant T-Mobile (SGH-T959) update .zip
2. Copy the "Voodoo-lagfix-3.0-SGH-T959-update.zip" file to your internal SD Card
3. Open the ROM Manager from the application menu and allow it root access.
4. Install ClockWork Recovery (Select Galaxy S Vibrant) and then Reboot into Recovery.
5. The default recovery menu will open, select "reinstall packages"
6. After the phone boots into clockwork recovery select "install zip from sdcard" then "choose zip from sdcard" and use the volume keys to move down to "Voodoo-lagfix-3.0-SGH-T959-update.zip" and hit the power key. Next confirm the install by moving to Yes and install. Once this is completed go back until you can reboot the phone. As the phone reboots the lag fix will be applied.
CREDITS:
eugene373 for the Frankin-Twiz Base
justanothercrowd for the exceptional kernel
RyanAZ for the easy Root Option
lbingham for the Mobile AP Mod
chaoscentral for the I9000 Camera Mod
rk0 for the I9000 Boot animation
Tydiz for the I9000 shutdown animations
And Anyone Else I May Have Missed!
Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?
dddtc2005 said:
Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?
Click to expand...
Click to collapse
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )
xipher_zero said:
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )
Click to expand...
Click to collapse
OK,got it. Thanks
I use Bionix's rom with voodoo kernel(thanks for his great work), but when i enabled voodoo it says '/dev/block/mmcblk0p3' in adb shell instead of '/dev/block/mmcblk0p4' in his thread. I don't know why but it will be all right to flash another Rom. I also searched on google, but thers's no help about it.
Hope this can help someone who were in this situation..
PS: When disabled ,it says '/dev/block/mmcblk0p2' corretly.
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Thanks for the Great Work!!!!!!
The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks! It really confused me for a long time...LOL
Parse Error on Sims3
Any reason this is showing up? Other than that, great ROM!!!!
Nice work, lets keep the development for the Vibrant rolling. The more the better!
Sent from my SGH-T959 using XDA App
Wow no one is reporting Bugs
The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks for clearing that up, I had already gone to sleep when dddtc2005 asked.
jreed3786 said:
Any reason this is showing up? Other than that, great ROM!!!!
Click to expand...
Click to collapse
I didn't have enough room in the ROM Zip to include the data package and still be able to use MediaFire's free 200mb account. I have updated the OP with the instructions on how to get and install the data package.
If anyone knows of a different file sharing site that is as easy for people to download from please let me know and I will upload the ROM with the data package included. (232mb).
I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??
I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App
chris279m said:
I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??
Click to expand...
Click to collapse
I have updated the OP to include instructions for getting the Sims to work. Basically the issue arises from the Sims 3 Stub file being locked to my handset. When it is installed on anyone else's handset it will error out due to the device ID mismatch. The way around this is to install the data package yourself. All of the instructions to do so are in the OP now.
junkdruggler said:
I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have never used DB before. Can I set it up so that anyone can download the file, or do they have to log into my DB account to access it?
You just upload and it allows you to share a link... its really easy and links your phone to your comp...
Sent from my SGH-T959 using XDA App
This looks awesome! It's great seeing all of these custom ROMs coming out now, thank you!
first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast
rolf90 said:
first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast
Click to expand...
Click to collapse
Thank you! I glad you like it. Any feedback is appreciated!
www.droid-life.com/2010/12/06/download-gingerbread-keyboard-for-rooted-devices/
instructions on installing the new gingerbread keyboard
Anyone try this yet? I am real interested in seeing how it works for you guys.
kevinb77 said:
Anyone try this yet? I am real interested in seeing how it works for you guys.
Click to expand...
Click to collapse
I have that's why I posted it lol.
kevinb77 said:
Anyone try this yet? I am real interested in seeing how it works for you guys.
Click to expand...
Click to collapse
I pulled it from another thread but its working. There was an issue with the auto correction but it was resolved. Just make sure wherever you pull from has it corrected (ie, the file I downloaded had _fixed in the name)
it2steve said:
I pulled it from another thread but its working. There was an issue with the auto correction but it was resolved. Just make sure wherever you pull from has it corrected (ie, the file I downloaded had _fixed in the name)
Click to expand...
Click to collapse
The one on the site is the new fixed version.
How is this keyboard compared tot he swype version we have working?
I get an error while installing the zip via CWM...:-(
eric.a.bardu said:
I get an error while installing the zip via CWM...:-(
Click to expand...
Click to collapse
So did I... "error" failed install(ok now)
I got the updated one... now trying to get the keyboard work
more reading to do
catttman said:
So did I... "error" failed install
Click to expand...
Click to collapse
Same here.
also getting a failed error when trying to install. whats the deal?
error install
install aborded for me also
working install
I had issues with cwm failing to up date as well. So after some google fu I managed to get a working install.
1. Download the file found in this thread.http://forum.xda-developers.com/showthread.php?t=864033
2. Power down and reboot into cwm.
3. Select mounts and storage and then select mount system.
4. Install zip from sd and select the zip from step one.
5. Reboot and enjoy.
6. In settings>language&keyboard there should now be an option for android keyboard. Open the browser and long press the url bar. You should get a popup allowing you to select the android keyboard.
Does this "IMPORTANT NOTE: this ZIP file is a ClockWork Recovery update file ==> DO NOT USE IT !!! (it will remove your system odex files) Just unzip and grab the APK and SO files." apply to the G-Tablet too? That thread talks about SO files and stuff too. I take it nothing bad happened when you flashed it?
jpmi23 said:
Does this "IMPORTANT NOTE: this ZIP file is a ClockWork Recovery update file ==> DO NOT USE IT !!! (it will remove your system odex files) Just unzip and grab the APK and SO files." apply to the G-Tablet too? That thread talks about SO files and stuff too. I take it nothing bad happened when you flashed it?
Click to expand...
Click to collapse
At first I tried the install with just the apk and so files and it didn't work for me.
As far as .Odex files I haven't seen any at all in the root folder.
So far I haven't had any fc's or issues what so ever.
jpmi23 said:
Does this "IMPORTANT NOTE: this ZIP file is a ClockWork Recovery update file ==> DO NOT USE IT !!! (it will remove your system odex files) Just unzip and grab the APK and SO files." apply to the G-Tablet too? That thread talks about SO files and stuff too. I take it nothing bad happened when you flashed it?
Click to expand...
Click to collapse
I followed wingman_214s instructions and it worked perfect for me. No issues so far.
Ok. I'll take the plunge. Thanks.
EDIT: Took the plunge. Typing on it now and liking it so far. Thanks for the help.
Sent from my GTablet-TnT-Lite using Tapatalk
I followed the instructions above ands while I can see the android keyboard under settings, clicking on the URL space on my browser only pops up the starndard TnT keyboard. How long do I need to engage the URL space? I would like to test it.
Try the google search bar. Just press and hold you should get a pop up. Select "input method" the android keyboard should be an option.
i'm curious as to why people prefer this keyboard over the stock TnT keyboard. the TnT has bigger keys. the gingerbread has these small little "half" keys. annoying to type on. or do other roms not have that keyboard?
Hi Guys! I finally can release my first customized themed ROM from SP3DV build! This is my daily use ROM and think it is so good to share it.
I'd prefer to shared the NANDROID (backup restore) but maybe upload the usual installing .zip file in next days. The major advantages of this rom is that it can boot with SD CARD inserted (It work for me and hope to work with any SD CARD type). Also use an app (tasker) that prevents rebooting after any missed call.
FEATURES:
- Based on CyanogenMod 7.1 Android 2.3.7
- This is a MOTO BLUR themed rom. (I don't use the BLURHOME launcher becouse it is so heavy for X1. Instead I use a blur theme for Great GO LAUNCHER EX)
- Changed Bootanimation with a 3D CYANOGENMOD7.
- JAVA enabled (For installing .jar files).
- New WALLPAPERS.
- 3 new AOSP themes Added (MOTOBLUR, ANASTASDROID, ROVER BLACK).
- Customized framework-res.apk.
- US text-to-speech (tts) Added.
- Changed the default FONT with the CHINT font.
- used the last Zargloub's kernel (gf111062 - 28.2.2012).
- CPU Max and Min frequency customized (128~614MHZ).
ADDED:
- Go launcher ex with BLUR theme, Go locker, Go locker themes, Go taskmanager, Go weather.
- Gauge battery widget.
- X-plore.
- Smart keyboard pro.
- Multitasking pro (With long press of home key it appears).
- Ucbrowser and Ucxunlei (a great chinese downloading app).
- Audio effect.
- TASKER (A good replacement of chinese Newding) [Great Thanks to BORKISHA and other guys that introduce it].
REMOVED:
- Stoke Android Keyboard.
- Old CMWALLPAPERS.
- CM7 old themes.
- Newding
BUGS:
THIS ROM IS UNROOT! So there are some bugs like wifi problems!
IF YOU DONT HAVE THE CLOCKWORKMOD recovery flashed to your XPERIA X1, please see the link blow till flashing CLOCKWORKMOD recovery. [thanks to Kerfooly]
http://forum.xda-developers.com/showthread.php?t=1329379
HOW TO INSTALL:
1- Download the .7z file from the provided link.
2- Extract it and put the folder clockworkmod in the root of your SD CARD.
3- Reboot in recovery and choose backup and restore.
4- select restore.
5- select the date-time provided. then select yes-restore.
6- reboot and enjoy without need to eject your SD CARD when booting!
7- After that ANDROID boots, launch the TASKER app and select your ringtone and SMS notification from your SD CARD!
Special Thanks to:
- SP3DEV
- Sun Dream
- Kerfooly
- Zargloub
- jerrytan93
Download link:
*** Link removed due to unlicensed paid software included in this release ***
-DM
IMPORTANT NOTE:
There are not something special in that build! just can find a way to prevent SD CARD checking while boot! I find that if the build be unroot it can't stuck while boot! I try 4zroot for unroot but it can't reroot! When the build be unroot some bugs appear! If the unroot-reroot problem solves, can say that the SD CARD problem finally can be solved!
first one unbelivable it really works with sdcard inserted nice job attisa!!!!
my simcard can't get detected with this rom
wow...really this build can used daily ??
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
mahmoodifar said:
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
Click to expand...
Click to collapse
I'd post the installer .zip file in some next days! But for now you can modify the TASKER app to use your ringtone! because this app use the SD CARD ringtones to prevent reboot when phone rings!
Elibl said:
first one unbelivable it really works with sdcard inserted nice job attiso!!!!
my simcard can't get detected with this rom
Click to expand...
Click to collapse
I have no idea why your simcard can't detected. Did you try reboot or replacing the simcard?! I think you do it! Hope that the .zip file don't have this problem!
Hi, thanks for this. I've just installed it. Whats wrong with wifi? its showing an "error" message and its not finding any network. Also, are GAPPS included ?
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
mahmoodifar said:
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
Click to expand...
Click to collapse
The simplest way is that use 4zroot.apk for unroot-reroot the device!
attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
thanks a lot! and what's the reason for the boot problem? do you know it?
attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
So, just load it up, click unroot then reboot, then run again and chose reroot?
for me it gives force closes and system is totally messed after unroot and i'm not able to reroot...
but boot works with sdcard inserted...
Just like me
Wifi doesn't work anymore
what kind of crap you posted attisa didn't you tried it before?
but solution is near...
wifi is also messed up for me...
EDIT: oh ok i understand this is the mod you did to the rom but i prefer to remove sdcard than to have no su rights and no wifi
but pretty good the solution is near
you only should mentioned the problems more clearly and earlier...
I think all of these problems are as result of shell rooting
If there is a way to could full root the NAND roms, all problems will gone (missed call reboot, SDcard, wifi, ...)
If it ok I share tasker and it's settings
What are the Phone Offhook and Phone Idle ?
Sorry OP, but i have to close this. Next time, do not include paid software in your release..
So! you've just rooted your Nexus 4.
Now you have Clockworkmod recovery or TWRP recovery, and a stock Android ROM. Want to flash your first ROM?
NOTE: "►" is what you should do, "►►" is a comment on what's happening.
Preparations to flash a ROM:
►First pick a ROM from the Development section or the Original Dev Section
►Put it on your sdcard, it should be a zip file.
Click to expand...
Click to collapse
Booting to recovery:
►Turn off your phone: by holding the power button, and choosing power off.
►Press and hold the volume DOWN button, and press the power button... keep pressing the volume down button until you see an android lying down with a door opened in his tummy
►►You are now in the Bootloader.
►►Now to flash your first ROM, you'll have to go to recovery to make the installation
►Press volume DOWN until you see "RECOVERY" in red
►Press power to select it
►►The phone will now boot to recovery (Clockworkmod/TWRP)
Another way is to use ADB:
►Plug your phone to your PC
►Check that USB debugging is on, in settings, developer options.
►Open cmd on PC
►Type the following:
Code:
adb reboot recovery
Click to expand...
Click to collapse
OPTIONAL Full Backup:
►►In recovery please do NOT use the power button for selections. please use touch.
►Go to backup and restore.
►Press the backup button.
►►This will backup EVERYTHING except sdcard, it will backup your apps and their data, your settings, and your themes/launcher customizations. just in case anything wrong happens.
►►Backup will take about 5 minutes.
►►At most, this will take 1.5GB in size (with 200 apps installed, like me).
Click to expand...
Click to collapse
Wiping, and flashing the ROM:
►Now go to wipe data/factory reset, and wipe your phone
►►This will wipe the /data partition on your phone, to flash a new ROM.
►Go to the first menu, and select install from sdcard
►Press choose zip from sdcard
►Locate your ROM, and select it
►Select "yes" and click it.
►►It will start installing.
►Once finished, go back to the first menu, and click reboot now.
►Let the phone boot (give it about 5 minutes).
►Finish the first setup.
►And reboot.
Click to expand...
Click to collapse
Congrats you have flashed your first ROM!
Troubleshooting:
Bootlooping:
►►Is your phone bootlooping?
►Go to recovery as shown above, and wipe your phone.
►OPTIONAL: reflash the ROM as shown above.
Click to expand...
Click to collapse
No Gmail, Playstore, Google account:
►Find Gapps HERE
►►GB is Gingerbread (2.3.x) ICS is Ice Cream Sandwich (4.0.x) JB is JellyBean (4.1.x/4.2.x/4.3)
►Put the Gapps zip file on sdcard
►Go to recovery
►Flash the Gapps zip file.
►►Do NOT flash Gapps directly after flashing a ROM, let the ROM boot first, then go to recovery and flash Gapps.
Click to expand...
Click to collapse
Speeding up GPS/AGPS:
►► One of the main reasons to root an Android phone is to speed up the GPS lock.
►► This happens by changing some text in a file called gps.conf in /etc/ or /system/etc/
► Get a file explorer with root support (root explorer, ES file explorer is good too)
► You'll have to replace your gps.conf with a new, tweaked one.
► Go HERE, pick your country, and download the file inside the folder.
►► If you didn't find your country (like me), pick the country that is the closest to yours.
► Put it on your sdcard
► Open up your root explorer
► Copy the file
► Go to /system/etc/
► Mount system as R/W
► Paste the file, and overwrite it with the old one.
► Now change it's permissions to rw-r--r-- by holding on it, and clicking permissions
► Change both owners to 0-root
Click to expand...
Click to collapse
Testing results:
►► The main purpose of the test is to make Android learn the new gps.conf file.
►► This happens by using an app that controls GPS and AGPS.
► Download GPS test HERE, and install it.
► Open it, go to menu-settings, and press clear AGPS.
► OPTIONAL: reboot
► After clearing AGPS, and while connected to the internet, press Update GPS.
►► You'll get a GPS lock in about 5 seconds
► Leave the GPS locked for about 10 minutes for Android to learn how it works.
►►This method will get you a lock in 5-15 seconds with or without internet connection.
Click to expand...
Click to collapse
Remove Music Lag on AOSP/MIUI/AOKP ROMs:
Problem:
► Music hangs for about a second repeating the last syllable the singer says. even while the screen is turned on, while it's charging, or while it's overclocked to 5GHz
Click to expand...
Click to collapse
Explanation:
►► This usually happens when on AOSP/MIUI/CM/AOKP ROMs and not Sense ROMs.
►► What is happening is that the buffer size for the non-Sense ROMs are set too low, so the music player gets to a point where it has to play something, but that "thing" isn't loaded, so it'll have to wait until the buffer loads it to play.
►► All of this happens is under a second, but this lag is VERY annoying, especially if you're on a headset, and the volume is set a little high.
►►The solution is to set the buffer size a little (or a lot) higher.
Click to expand...
Click to collapse
Solution:
► Download PlayerPro or PlayerPro Trial.
► Download the PlayerPro DSP Pack.
► Run PlayerPro.
► Go to Menu-Settings-Audio.
► Enable "DSP pack".
► Click "Audio buffer" and set it to Large (or Very Large).
► Click "Audio priority" and set that to Maximum.
►► Now you'll have to always use PlayerPro for music playing, because it's the only Music player that is compatible with the DSP pack... but it's worth it.
Click to expand...
Click to collapse
Thanks to BlackICE Team for the GPS files.
Thanks to all the users for teaching me those things.
Hi.thank you for the guide.
The 4shared link seems to be empty,its just a folder but nothing inside.
Sent from my Nexus 4
Yadro said:
Hi.thank you for the guide.
The 4shared link seems to be empty,its just a folder but nothing inside.
Sent from my Nexus 4
Click to expand...
Click to collapse
investigating into it...
EDIT: apparently, i can't share multiple files on 4shared... looking for alternatives
EDIT 2: fixed
wow, 10 downloads already?
if you guys are having a problem with the guide, please do tell me.
-----------------------------
^this bar means im on phone
My country is not listed in there.
Should it work if i pick the nearest country?
yep, it's there in OP
-----------------------------
^this bar means im on phone
Unintentional Bump
Sorry for bumping for an old thread but this is the only thread I got that it properly detected actual satellites on GPS Status. Though I still can't lock-on to my location, and GPS Test just shows 'No Fix' on its status. I'm from the Philippines by the way.
on the same boat..
kentaro25 said:
Sorry for bumping for an old thread but this is the only thread I got that it properly detected actual satellites on GPS Status. Though I still can't lock-on to my location, and GPS Test just shows 'No Fix' on its status. I'm from the Philippines by the way.
Click to expand...
Click to collapse
i am also into same problem...aftr installing cm13 i am having gps malfunction.....searching a lot for the solutions but still no luck.....
if anyone know it pls help ...?