Related
Just posted this as a reply to a thread in 'Themes and Apps' but thought it belonged in 'General' so I've echoed it here. The Admin can feel free to remove the double posting, take away my birthday, etc. if I've broken the forum protocol
==========================
I connected my HDMI cable for the first time since upgrading/rooting ZV8 and I couldn't get the screen to mirror. This is something I've used/done quite a bit before the update and I never had an issue at home or in hotels while traveling. Now for some reason the screen doesn't seem to want to mirror.
After fooling around with it for a while, I'm starting to think the problem it could be tied to the G sensor position - when connected, I'll re-position the phone and when close to landscape/vertical the screen will mirro of a few seconds and then quit. Could someone with rooted ZV8 give this a try and let me know if they're having problems?
Here's what I've done/observed:
I've rebooted and re-tried
I've checked all the right boxes under settings - connectivity
I've toggled screen resolution - 480/720/Auto
The status bar properly reports when the cable is connected and indicates the screen is mirroring (but it's not)
Most times the sound will mirror and occassionally occassionally the screen will do so but only for a few seconds.
Tried this with HBOGo, Netflix, and just swiping across home screens
Sometimes the screen mirrors nothing and sometimes a blue screen.
I get this same issue on my Galaxy Note...I feel your pain man, no help anywhere.
Are you using stock or broken out? Have you tried using in portrait mode and let the video load into landscape..?. I know my hdmi port on my phone is a very loose connect and I have to have it standing on end to get it to work. Cant say anything about sounds working or not I use a LCD monitor with no sound capabilities so I plug speakers in. Haven't had any software related to hdmi issues while on broken out...
Sent from my VS910 4G Broken Out 2.0.1 powered by Mt using xda app-developers app
meabrams said:
Are you using stock or broken out? Have you tried using in portrait mode and let the video load into landscape..?. I know my hdmi port on my phone is a very loose connect and I have to have it standing on end to get it to work. Cant say anything about sounds working or not I use a LCD monitor with no sound capabilities so I plug speakers in. Haven't had any software related to hdmi issues while on broken out...
Sent from my VS910 4G Broken Out 2.0.1 powered by Mt using xda app-developers app
Click to expand...
Click to collapse
Problem turned out to be a damaged cable. i replaced my $2.00 HDMI cable form Amazon with another $2.00 HDMI cable from Amazon and it solved the problem. We'll see how long this one lasts . . .
Just reading a doc and screen went to sleep. Few days ago read about apple patent involving zooming a page based on proximity of users face to screen...
Given android does face unlock as is, it is not a small leap for it to detect that my mug is peering at the screen and so prevent the device from going to sleep in mid-read. Conversely and optionally, if I 'look away' or no face detected power off the screen.
Seems doable in an app easy enough, but os wide would be ideal. or did fruity folk patent that too?
Just a thought as my screen went off reading a spreadsheet...
Edit: It would only have to check for a 'face' at the instance the device would normally go to sleep (after usual x amount of time with no touch input), so camera would only be active for a second, so not a resource hog.
I like it . I want it. My device should know I am reading and not shut the screen off.
Sent from my Nexus 7
Samsung has what you are talking about. It uses proximity sensor and camera from what i understand.. But it works about as good as a light sensor. And uses battery . Had it on note 10.1 Check out the specs on samsung site ..
it Takes what 1/10th of a second to hit the power button or just turn it to NOT SLeep. Adding to much to a device is just something else to fail..
But nice thought .
erica_renee said:
Samsung has what you are talking about. It uses proximity sensor and camera from what i understand.. But it works about as good as a light sensor. And uses battery . Had it on note 10.1 Check out the specs on samsung site ..
it Takes what 1/10th of a second to hit the power button or just turn it to NOT SLeep. Adding to much to a device is just something else to fail..
But nice thought .
Click to expand...
Click to collapse
It's actually very useful I have it on my SGS3 the Nexus 7 could have used it its a pain when you're reading that the Flippin screen doesn't always shut off
from my SGS3 while my nexus 7 rests
There is an app that does something like this, i think it was even featured here in a video on XDA. I'll update this post when i find it... hopefully it will be what you're looking for. Blanking on the name atm tho, but i have a friend who uses it..
Update: https://play.google.com/store/apps/details?id=com.keyes.screebl.full&hl=en
Not sure but maybe it will help. It doesn't use face unlock i don't think, but uses the accelerometer.There is also a free lite version.
My thought was that in the seconds before device normally switches screen off, Camera or sensor is activated, checks if there is anyone there, and if so prevents sleep. V little resource required if done properly. Could be active only for same duration as a face unlock, possibly quicker as only detecting A face not recognising your face.
Seemed like something's that should have cropped up before, will check out app too cheers.
Sent from my Nexus 7
I think this would be a useful feature as well.
Smart Stay EX....
Fantastic app... I use the free one and use Androids option to hide the notification icon and it works flawless... Gonna buy it soon
I have only had my tf701 a day but Ive noticed sometimes when docked to the keyboard if you dont touch the mouse for a few seconds sometimes when you move the mouse again it will make a flicker around where the mouse is located, it doesnt always do it, just wondering if anyone has noticed this or is it a fault with my tablet?
I can live with it, but if there is a known fix it would be nice to sort it.
Thank You
After a bit of messing about I think it only does it with live wallpapers? Which isnt a problem as I wont be setteling on a live wallpaper anyway found them far too distracting.
Would still be nice to know this is fixable though.
Thank You
I was wrong its not to do with live wallpapers, just seems to do it on some apps, for example if I go to apex launcher then settings, if I leave the mouse for 10 seconds or more than rouch to move it, it makes the strange flash across the screen.
Could anyone else please test if theirs does this?
Thanks
Asus considers it to be a feature - not a bug - and calls it "smart backlight adjuster".
For most people it goes away upgrading to 4.3 which I guess you haven't done?
berndblb said:
Asus considers it to be a feature - not a bug - and calls it "smart backlight adjuster".
For most people it goes away upgrading to 4.3 which I guess you haven't done?
Click to expand...
Click to collapse
Yeah I am running 4.3?
I have noticed it does it on the drawer too, only when using the dock and leaving the mouse dormant for 8 seconds or more than moving it again it sends horizontal lines across the screen for a split second, is this the bug *ahem* feature you speak of?
Thanks
berndblb said:
Asus considers it to be a feature - not a bug - and calls it "smart backlight adjuster".
For most people it goes away upgrading to 4.3 which I guess you haven't done?
Click to expand...
Click to collapse
Also when you say adjuster, that sounds like it would be something that requires adjusting but it still does this with screen set to full brightness, or least brightness, with auto off, also wit outdoor on or off, it still does the strange flicker.
I can happily live with it, doesnt bother me that much just dont want it to be something that is going to get worse as Im very close to unlocking the device and dont want to blow all warranty if I already have a fault.
Thanks
dougie175 said:
Also when you say adjuster, that sounds like it would be something that requires adjusting but it still does this with screen set to full brightness, or least brightness, with auto off, also wit outdoor on or off, it still does the strange flicker.
I can happily live with it, doesnt bother me that much just dont want it to be something that is going to get worse as Im very close to unlocking the device and dont want to blow all warranty if I already have a fault.
Thanks
Click to expand...
Click to collapse
No what I had in mind was the screen dimming and brightening. What you describe sounds more like the "flashing black lines" the TF700 has (which seems to be due to some nvidia driver issue). I have not noticed those on the TF701 but then, I am so used to them from the 700 I probably wouldn't even notice. Have not read anything about them in the forums though, so I suspect your situation is unique.
Are you in the US? Get a Squaretrade warranty. I find the peace of mind is worth the $75 since they don't care about locked/unlocked...
berndblb said:
No what I had in mind was the screen dimming and brightening. What you describe sounds more like the "flashing black lines" the TF700 has (which seems to be due to some nvidia driver issue). I have not noticed those on the TF701 but then, I am so used to them from the 700 I probably wouldn't even notice. Have not read anything about them in the forums though, so I suspect your situation is unique.
Are you in the US? Get a Squaretrade warranty. I find the peace of mind is worth the $75 since they don't care about locked/unlocked...
Click to expand...
Click to collapse
No I am in the UK Im afraid, hmmmmm its deffo a tf701 not a 700 hehe
Can you please test for me open your drawer, leave the mouse in the centre for 10 seconds then move it and see if it does the black lines?
Also did the issue ever get resolved or get any worse on the 700 or is it just something the user gets used to?
Thank You
dougie175 said:
No I am in the UK Im afraid, hmmmmm its deffo a tf701 not a 700 hehe
Can you please test for me open your drawer, leave the mouse in the centre for 10 seconds then move it and see if it does the black lines?
Also did the issue ever get resolved or get any worse on the 700 or is it just something the user gets used to?
Thank You
Click to expand...
Click to collapse
Don't have the keyboard for the TF701 - yet. So I can't help you with your test.
The black lines on the 700 are benign - I don't even notice them anymore. But I don't think my 701 has them, so there is a possibility that your tablet has a glitch...
berndblb said:
Don't have the keyboard for the TF701 - yet. So I can't help you with your test.
The black lines on the 700 are benign - I don't even notice them anymore. But I don't think my 701 has them, so there is a possibility that your tablet has a glitch...
Click to expand...
Click to collapse
Thanks, I have sent Asus an email to see if they will help me, I bought the tablet second hand though so they probably have no interest even though it is only 3 months old and hasnt been out long enough to be out of warranty.
If they will fix or replace it for me ill take that, if not i can happily live with it
dougie175 said:
No I am in the UK Im afraid, hmmmmm its deffo a tf701 not a 700 hehe
Can you please test for me open your drawer, leave the mouse in the centre for 10 seconds then move it and see if it does the black lines?
Also did the issue ever get resolved or get any worse on the 700 or is it just something the user gets used to?
Thank You
Click to expand...
Click to collapse
Just tried your test and I see no lines. Maybe because I'm not on the stock rom exactly?
dougie175 said:
Thanks, I have sent Asus an email to see if they will help me, I bought the tablet second hand though so they probably have no interest even though it is only 3 months old and hasnt been out long enough to be out of warranty.
If they will fix or replace it for me ill take that, if not i can happily live with it
Click to expand...
Click to collapse
I don't want to be negative here, but waiting for Asus' response is pretty useless. Their support staff has two answers for questions beyond: "Where do I find my pictures?" and they are:
a) Factory reset, and if that does not help:
b) Send it in for repair - which may or may not cost you a bundle...
If you do send it in get written confirmation that your tablet is still under warranty first and take pictures of your tablet documenting its condition, how you packed and shipped it etc.
Thanks for the replies
This is what I get
dougie175 said:
Thanks for the replies
This is what I get
Click to expand...
Click to collapse
That is entirely different from what I thought it was and I have no idea what could be causing it. Do you get that ever when the dock is not connected?
berndblb said:
That is entirely different from what I thought it was and I have no idea what could be causing it. Do you get that ever when the dock is not connected?
Click to expand...
Click to collapse
No it cannot be replicated when the dock is not connected or when just touching the screen with or without the dock connected, it only does it on some areas of the system such as drawer and some apps if the mouse if left dormant for 8 seconds or so then moved.
I have done a factory reset and cold boot as requested by Asus, but the problem still persists as shown here in the new video
http://s9.photobucket.com/user/dougie175/media/Mobile Uploads/MOV_0020.mp4.html
dougie175 said:
No it cannot be replicated when the dock is not connected or when just touching the screen with or without the dock connected, it only does it on some areas of the system such as drawer and some apps if the mouse if left dormant for 8 seconds or so then moved.
I have done a factory reset and cold boot as requested by Asus, but the problem still persists as shown here in the new video
http://s9.photobucket.com/user/dougie175/media/Mobile Uploads/MOV_0020.mp4.html
Click to expand...
Click to collapse
Mine definitely doesn't do that. Try switching the cursor mode to gesture mode for me and see if that makes a difference. (I doubt it will but you never know)
Then go to the system settings, about and click the build number 7 times to enable developer mode. Then go into developer settings and look for force GPU rendering and disable hardware overlays. Check both. Reboot - any difference?
Check the cables
When troubleshooting a screen flicker, I always check the cables first. Several TechRepublic members agree. Ian C B, Bruceb, Crjordan, and Aqmike all suggested checking the video and monitor power cables before doing anything else. Ian C B reminds us to confirm that the cables are screwed in tightly and to replace the cables with new ones to see if the problem persists.
"The color changes are almost always a faulty wire in the cable," Crjordan said. "Try working the cable back and forth near both connectors. If this causes the color change, you could have a broken wire in the cable, or a loose pin in one of the connectors. Make sure the cable is out of the way (from feet, hands, and other objects). You may also try zip-tying it to itself or another stable object until you can replace either the cable or the monitor."
Check the environment
If a cable isn't the culprit, then the user's workspace should be next on your hit list. Monitors are notoriously sensitive to magnetic fields. Speakers, florescent lights, fans, cell phones, radios, and any other electrical device can cause a wide range of monitor problems. (See Figure A.) "Check what's around the [monitors]," Vilefileman said. "Cell phones are known to cause screen flickers, among other things, and plugging a radio or fan into the same receptacle can also cause screen flickers."
Maybe its like some kind of electrostatic interefereence in your environment more to do with the power being supplied to the device. Check cables. Etc. I think its interference or something.
sbdags said:
Mine definitely doesn't do that. Try switching the cursor mode to gesture mode for me and see if that makes a difference. (I doubt it will but you never know)
Then go to the system settings, about and click the build number 7 times to enable developer mode. Then go into developer settings and look for force GPU rendering and disable hardware overlays. Check both. Reboot - any difference?
Click to expand...
Click to collapse
I have noticed one other thing, it will not do the fault on first reboot, until the screen is locked, once unlocked it starts doing this fault
Gesture mode made no difference
Also done the developer options and they made no difference :crying:
sbdags said:
Mine definitely doesn't do that. Try switching the cursor mode to gesture mode for me and see if that makes a difference. (I doubt it will but you never know)
Then go to the system settings, about and click the build number 7 times to enable developer mode. Then go into developer settings and look for force GPU rendering and disable hardware overlays. Check both. Reboot - any difference?
Click to expand...
Click to collapse
I was wrong disabling hardware overlays does seem to resolve the issue?
However each time I reboot the option is un ticked that's why I thought it didn't do it
YayYouFixedIt said:
Check the cables
When troubleshooting a screen flicker, I always check the cables first. Several TechRepublic members agree. Ian C B, Bruceb, Crjordan, and Aqmike all suggested checking the video and monitor power cables before doing anything else. Ian C B reminds us to confirm that the cables are screwed in tightly and to replace the cables with new ones to see if the problem persists.
"The color changes are almost always a faulty wire in the cable," Crjordan said. "Try working the cable back and forth near both connectors. If this causes the color change, you could have a broken wire in the cable, or a loose pin in one of the connectors. Make sure the cable is out of the way (from feet, hands, and other objects). You may also try zip-tying it to itself or another stable object until you can replace either the cable or the monitor."
Check the environment
If a cable isn't the culprit, then the user's workspace should be next on your hit list. Monitors are notoriously sensitive to magnetic fields. Speakers, florescent lights, fans, cell phones, radios, and any other electrical device can cause a wide range of monitor problems. (See Figure A.) "Check what's around the [monitors]," Vilefileman said. "Cell phones are known to cause screen flickers, among other things, and plugging a radio or fan into the same receptacle can also cause screen flickers."
Maybe its like some kind of electrostatic interefereence in your environment more to do with the power being supplied to the device. Check cables. Etc. I think its interference or something.
Click to expand...
Click to collapse
Theres not really any cables I can check, I have checked the connection is pushed in correctly which it is.
I have just tried to replicate the error outside with my phone turned off inside the house so no chance of interference and the error was still present.
Don't think this is quite the issue as it only does it when moving the mouse after leaving it on certain apps for 8 seconds.
Thank you for the help though
So I bought the LED flip cover for my S7 Edge (EF-NG935). Although its a really good quality case I have issues with its software. The LED's on the case display the time, receiving a call or a text and afterwards it goes dark. There is no way for me to see if I have a notification on my phone. Usually the phone LED would flash slowly notifying me to check my phone. Other than that the Flip cover LED does not notify me for any general notification (viber,facebook etc). Not even when i receive a message on them. So there is no way for me to see that i just received a message or that I had received a message. Other than that it doesn't display music bars when music is playing or the volume.
What it would be excellent is that the LED's should be always on (hence low consumption). In case of a notification it should display the icon of the app that I got a notification from. The LEDs are quite a lot so its easy to figure out what app send the notification. The case costed 70 Euros which are quite a lot. There should be a customization software or something. Samsung needs to address this issue. My ROM version is : G935FXXU1APAW
I agree 100%. One of the great things about Android phones are the LED notifications, but this cover covers it and it should IMO show notifications on the cover.
Just a simple blinking diod would even be good enough.
Disappointing
Or make the dot leds always on! Can we edit it's settings with root? Does anyone have knowledge how to? The led view flip cover is really nice and has potential. But right now it's not even working right.
I reported the issue to samsung...but I'm not expecting much...xda devs is the only salvation haha. Any rom cookers that can help?
When i went to a samsung store to buy the led flip case, the first one i used had an issue like yours so we cracked open another case and tried it on and the 2nd one works like a charm and as a matter of fact no issues until now.
My previous experiences tell me that the sensor itself is faulty on the case. Go to your nearest samsung store and try a new led flip case. See if the issue is still there on a new case.
Does it show all general notifications? Like what's up, Facebook,etc? Because mine shows only time, battery charging, incoming call,and sms. No general notifications...and furthermore it should stay on all the time so I know I had a notification..like the phone led! I'll go try another one Monday...but I still want to see customization on the led case. Always on option...app icons etc.
Please explain how your case works? General notifications etc...
Ok so I was doing some googling on this, and found that it seems to work with Nova Launcher Prime + TeslaUnread (their unread badge plugin). It seems to show four dots spinning on other Samsung LED flip covers.
I don't have Nova Launcher Prime, so I can't test it. If you do, please feel free to try!
edit: ok so I've got nova launcher prime now, and it still doesn't work..
I got my info from here http://forum.xda-developers.com/note-4/accessories/led-case-review-t2993839/page2
edit 2: from reading a bit more, the note 4 led cover had some support for 3rd party apps, but that seems to be gone with S7 LED cover..
So there is a way to control it! We just need the software! Great work @dogans ! Anyone who can give us some help? I'm sure its not such a hard thing to do...if it could only take the notification bar icons...and show em on..that would be great. For example if you have a viber text...it should show a viber icon always on till you read it!
gasketse said:
Does it show all general notifications? Like what's up, Facebook,etc? Because mine shows only time, battery charging, incoming call,and sms. No general notifications...and furthermore it should stay on all the time so I know I had a notification..like the phone led! I'll go try another one Monday...but I still want to see customization on the led case. Always on option...app icons etc.
Please explain how your case works? General notifications etc...
Click to expand...
Click to collapse
Notification only works with standard sms, prompt to swipe for call only happens when receiving calls, music player led only works with samsung music app, alarm clock with samsung built in clock app.
No 3rd party notification support.
Led doesnt stay lit all the time.
It was meant to do that.
And if u wanna check the time u can press the power/lock button.
Well that's no good. First of all..even if I get a standard sms or call..after it lids up for some seconds then it goes dark. The phone led is covered so how I supposed to notice I got a notification. If someone is willing to modify its settings or make a small app to take control of it that would be great. It's highly inefficient as is.
Luckily i read it. I was planning to buy one. Saved some money there.
arslanshah said:
Luckily i read it. I was planning to buy one. Saved some money there.
Click to expand...
Click to collapse
No you should buy it...it's a really nice case! Even without the notifications...and I'm sure it's a matter of time till we get it right! Haha! I don't think there is a better case..leather plus led
Update: the case works with samsung music player. Wish it would stay on all the time. Volume shows up as well. So the only thing that doesn't work is general notifications and always on (which it's a must if you ask me)
gasketse said:
Update: the case works with samsung music player. Wish it would stay on all the time. Volume shows up as well. So the only thing that doesn't work is general notifications and always on (which it's a must if you ask me)
Click to expand...
Click to collapse
Im not too sure but the number of leds there > number of lcds on a 5" lcd smartphone. If its always on, theres bound to be a huge battery drain
Well at least one led should fade in and out just to let you know you have a notification... Like the phone LED on top of the screen. Can someone write an app to control it? Or at least enable general notifications.
hi, i got problem with this s7 edge led flip case. somethimes it show the clock when i close it but sometimes not. already claim the warranty, and got new one but sadly it happen again after several hour using. one thing i noticed when the led it not show , then put my phone back on metal object suddenly led is working. what do u guys think, problem came from the case or the phone itself?
Probably nfc interference... The case works fine here. Except the above complaints. Try testing it on someone's else's phone. And try your nfc with another phone as well. If both works fine its a software problem. Hard reset!
azrudin99 said:
hi, i got problem with this s7 edge led flip case. somethimes it show the clock when i close it but sometimes not. already claim the warranty, and got new one but sadly it happen again after several hour using. one thing i noticed when the led it not show , then put my phone back on metal object suddenly led is working. what do u guys think, problem came from the case or the phone itself?
Click to expand...
Click to collapse
I have the same problem like this. If the phone
attached with another phone the LED
can work properly,
But if not attached the LED not working.
Picked one up today, tried the hopeless Samsung Experience store in London - who had no S7 Edge cases at all !!!
Went to Carphone Warehouse and got a 3 for 2 deal, but again only bought the LED as that was all they had. Works fine, but boring the led as always with Samsung great idea (hardware) poor software failure to exploit hardware potential.
so did anyone figure out how to modify its software? it shouldnt be that hard i guess.
First of all, I love this phone. The main selling point for me was the massive battery and from there it's just getting better counting in the other features, but as always, nothing is perfect and I'm not that experienced with Android in general so figured I'd ask away here. As a disclaimer, for all the things below, I'm not interested in rooting the phone, feel free to write if rooting is the only option though and if doing so, what I am asking for would work.
Is there any way to turn off the volume warning? Like if you're going above 70%. Seems it's a lot less aggressive than on my old S9 though.
Is there any way to add a few more steps to the volume? It appears 15 is the highest volume at the moment. And the highest volume is a bit low for my taste, when listening to music. I'm using BOSE QC20's and while they sound great, I could use a few more steps. I used some App on my S9 but it didn't really sound that well. For comparison, on the PC you can put VLC on 200% AND turn up the volume on the headset as well, if you want.
What kind of screen protection would you advice? Or shouldn't I bother with that?
How water resistant is the phone? All I know is that there is no classification yet. Even it isn't, how would you rate it? Go Swimming? Drop it in a pool of water? Walk with it in the rain? Or panic if one droplet gets anywhere close to the speakers?
Can I dual charge the phone? As in, if the Fan is connected, can I put one charger in the bottom Type-C port and one into the fan?
What happens if I put the charger in the Red sideport? Not that I would, just curious as I saw a warning saying not to.
Similar to the dual charge, would a PC gaming headset work on the phone that uses 2 3.5mm pins? The sound pin would go into the fan and the mic pin would go into the bottom slot of the phone, or vice versa?
I've been trying to change the Notification sound and ringtone for Whatsapp using the same sounds I had for my S9. I've added both (Orange & Whisper) but they just don't want to work. I made them in .mp4 (aac), .mp3 & .oog formats. When I select them in the list, they are played as they should but when I get a message and/or recieve a call, the latest (standard) signal is instead used.
Update: I managed to get the notification sound to work now (Whisper). By going into the Phone Settings -> Notifications -> WhatsApp. Seems that option in there would override the App Settings. However, when I get a call now, BOTH the original ringtone and the S9 (Orange) one is played ontop of each other.
While we are on WhatsApp, how can I remove the big notifications. Like, there's 2 types. The one at the top of the screen (I want this) and then it's the big popup in the middle of the screen (that has a reply field and some more options (I don't want this). I remember it was a hassle to get rid of on my S9 so thought I'd ask.
Bug or feature? When I'm inside a program and exit back to the Home screen, I've noticed the "locked" bottom row starts jumping, as if they want to swipe up. I'm using the Two-Layer mode. Not sure if it's a bug or a feature "showing" me there's stuff down there.
Last but not least, can I move the clock on the lockscreen? It's currently in the top left corner, I'd prefer to have it centered.
Sorry for the long post and thanks in advance!
I've replied in line to the questions I can answer.
How water resistant is the phone? All I know is that there is no classification yet. Even it isn't, how would you rate it? Go Swimming? Drop it in a pool of water? Walk with it in the rain? Or panic if one droplet gets anywhere close to the speakers?
Not very, there doesn't appear to be any waterproofing, check the sim card tray for example, no rubber seal.
Can I dual charge the phone? As in, if the Fan is connected, can I put one charger in the bottom Type-C port and one into the fan?
You could but the phone isn't going to charge twice as fast, I think it'll likely only charge from one port but shouldn't do any damage.
What happens if I put the charger in the Red sideport? Not that I would, just curious as I saw a warning saying not to.
People say it dies but I haven't tried it, it's not the same as a C port so you'd have to force it.
Similar to the dual charge, would a PC gaming headset work on the phone that uses 2 3.5mm pins? The sound pin would go into the fan and the mic pin would go into the bottom slot of the phone, or vice versa?
No, there's no mic in option afaik.
Bug or feature? When I'm inside a program and exit back to the Home screen, I've noticed the "locked" bottom row starts jumping, as if they want to swipe up. I'm using the Two-Layer mode. Not sure if it's a bug or a feature "showing" me there's stuff down there.
Probably a feature as I think I've seen that on some pixel launchers but I don't use the stock one personally.
1) There isn't;
2) You can only set Outdoor Mode on, but the volume will go up, no volume steps wil be added;
3) I think you should go for one with good comments, since you have the fingerscan under the display and a screen protection may void It;
4) the phone is not certified for water/dust resistance. So, just avoid contact with water. Tho, I don't think some raindrop will ruin it;
5) You cannot dual charge the phone;
6) The Red sideport is a Trademark Port made by Asus exclusively for their optional accessories. So, just leave It alone if you don't wanna be sorry;
7) No such phone will ever have the drivers made for Windows/MacOs which makes the headset to work on a personal computer;
8) You can have this setted on the Sound Settings;
9) You can have this setted on the Notification Settings;
10) that's a feature;
11) you must use third part apps for that.
Thank you so much, both of you.
The volume warning is a lot less of a pain than I initially thought. The one on the S9 is rather agressive so had some bad experiences. Can't say I notice any diff with Outdoor mode but I'll try more later, suppose it's fine.
Good point about the screen protection, I'll definately keep the fingerprint sensor in mind.
The waterproofing, or non-waterproofing rather is one of the Con's of the phone I suppose. Not that it's an issue but I'd rather not care at all as I could with my old phone. Thanks for clarifying though. My dad lost his old iPhone 6 to having his phone in the rain so I kinda know the limit then (as that also lacked any kind of cert).
No dual charging, makes sense. One takes prio.
Yeah, I'll not mess with the red port. @willhemmens, dies as in "throw the phone and buy a new one" or "phone shuts off but just restart and it's fine". (Like, battery is dead/dies). Just curious here really.
I see, that's too bad. Suppose I'd have to get one of those 2 becomes 1 3.5mm cable adapters.
@NajimKiSaad, that's just for the phone ringtone/sms though? This is for Whatsapp exclusively. It's as if a WhatsApp call triggers as a normal call as well as it's own settings, kinda.
Hm, where? Settings -> Apps & Notifications -> WhatsApp -> Notifications, it's set to - Behavior: Make Sound. Same in the App itself, Popup is not enabled anywhere.
"Bug or feature? When I'm inside a program and exit back to the Home screen, I've noticed the "locked" bottom row starts jumping, as if they want to swipe up. I'm using the Two-Layer mode. Not sure if it's a bug or a feature "showing" me there's stuff down there."
Well, that's good to know. How do I disable it? I just find it annyoing.
And for the clock widget on the Lockscreen, any recommendations? I like the style of the default one, just the position is kinda off.
Once again, thanks for all the answers!
Not related to your questions but have you felt that this phone just cuts off the internet connection to Whatsapp? I don't get notifications after a while and the Whatsapp Web says that my phone is not connected to internet even though there is internet. Whatsapp only starts working when I open this app. Then, I get all the messages. I have allowed unrestricted internet access to this app and turned off battery optimization for this app. Any ideas?
That's interesting, I haven't had it as you describe it no but since I got the phone, I've noticed the "last online" doesn't always show on my friend I have on WA. Could be that she has turned it off but it works sometimes.
Looking at the top bar on the phone, I added internet speed and it says 0 B/s quite often so my guess is that it only uses internet on demand, maybe it has something to do with that?
tinyimg.io/i/RQf50YL.jpg
Think I might have seen a post about it too, could be wrong though.