Hello i successfully rooted my galaxy note and overclocked it im running darkynote rom but want to change to a new, But firstly i want to do a fresh install delete everything apart from the kernal and root, Do i simply just go into
Privacy, Factory data reset ?
First of all, you want to do a backup of your existing system and data in case something goes wrong. The way to do this is
1. reboot into CWM Recovery
2. choose Backup and Restore option
3. Backup
and CWMR will backup everything. Restoring is just as easy (if something goes pearshape with your new install).
Usual steps when flashing new Roms are
1. reboot into CWM Recovery
2. wipe cache (2 times)
3. advanced/wipe Davlik cache (2 times)
4. factory reset (2 times)
5. install zip from sd card (this is your new Rom)
However, bear in mind that some Roms have different flashing procedures, so you'd do well to follow closely flashing instructions in their respective threads. Those can be usually found in 2nd or 3rd post.
Hope this helps.
scottdonny08 said:
Hello i successfully rooted my galaxy note and overclocked it im running darkynote rom but want to change to a new, But firstly i want to do a fresh install delete everything apart from the kernal and root, Do i simply just go into
Privacy, Factory data reset ?
Click to expand...
Click to collapse
Refer this lucid guide for all your need for flashing a new ROM on your rooted Gnote: http://forum.xda-developers.com/showthread.php?t=1424997
I hope u are aware with every custom rom flash, you change your binary counters and that this will hamper your warranty claims, in case of needful. Nevertheless, its always useful to be enterprising... so good luck!!
Related
I read as much as I can about installation of a custom ROM. I think I'm confident enough to do it now, but I just want someone to review these steps before I start.
I have a Rogers I896 currently running the stock froyo that I upgraded via Kies with a build 10.10.
Because this is on a build 10.10 I can't follow the steps vertabim with the guide in the android development forum.
1. Root with SuperOneClick
2. Titanium Backup
3. Use Odin3 v1.7 or later to restore to stock with this http://forum.xda-developers.com/showthread.php?t=905042 and the 512 pit file. (I understand this is unnecessary as I'm already stock, but in case I need to revert back to stock from a custom ROM, this is what I'll do)
4. Reroot with SuperOneClick
5. Get the ROM and put it in the root of the phone
6. Download ROM Manager and install Clockwork Recovery
7. Boot into recovery and install zip from SD card and choose the zip file that I downloaded.
8. Titanium Backup to restore
Please let me know if I'm missing something. I think I read something about Nandroid backup somewhere in the forums. I'm not exactly sure what that is and it didn't really say that in the guide. Should I do that and how do I perform that?
I'm thinking about installing either Paragon, Serendipity, or di11i. Perhaps someone can also maybe list some differences, issues, pros and cons about these ROMs.
Thanks in advance!
your steps are good enough for you to flash to a new rom.
You may have trouble with installing Clockwork. If you do, follow this link.
Also, once you reboot into clockwork, remember to do a backup of your current ROM and move it and your TiBu backups to your HD. Clearing your cache before you install your new ROM isn't a bad idea either
Goodluck!
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
integrasaurus said:
You may have trouble with installing Clockwork. If you do, follow this link.
Also, once you reboot into clockwork, remember to do a backup of your current ROM and move it and your TiBu backups to your HD. Clearing your cache before you install your new ROM isn't a bad idea either
Goodluck!
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I896 using XDA App
likiud said:
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
I do not think "clear cache" is necessary when you install a new rom, since most of rom will format the related partitions first. You can clear the dalvik cache in the cwm.
A master clear is recommended since it will reset your phone to factory default and delete all the data in your built-in sdcard.
Click to expand...
Click to collapse
mengbo said:
likiud said:
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
I do not think "clear cache" is necessary when you install a new rom, since most of rom will format the related partitions first. You can clear the dalvik cache in the cwm.
A master clear is recommended since it will reset your phone to factory default and delete all the data in your built-in sdcard.
Click to expand...
Click to collapse
It doesn't hurt AFAIK. I do notice after restoring apps with TiBu some apps require you to clear their cache in order to work properly, so I do it as a preventative measure.
Another tip: do NOT restore all system data with TiBu after you flash!
Click to expand...
Click to collapse
I started on Rogers stock 2.2.
Used superoneclick to root. Installed rom manager. Used a script to modify my recovery 3e file. Rebooted into recovery. Flashed cwm. Installed my custom rom.
Pretty awesome.
Sent from my SGH-i896
Hey I don’t mean to hijack/bump the thread but I’ve got an I896 which I’m attempting to flash a custom ROM onto, but I’m a complete phone newbie and could use some assistance when it comes to clarifying some instructions. This thread seemed to be the most “laid out” instruction guide for the I896 which I could find.
Currently my phone is running 2.2 Froyo / I896UXJL1 / Kernel 2.6.32.9 which I got via Kies early January when the update was released by Rogers.
I downloaded SuperOneClick 1.7 and rooted it without problems, but that’s as far as I’m clear/comfortable.
1. Do I need to use Odin (http://forum.xda-developers.com/showthread.php?t=905042) to restore to stock? Since I’m on the default Rogers technically that is already stock, no? Can I simply continue on from where I am?
a. If I don’t need to use Odin, do I need to make a backup with titanium?
2. Does step 6 of the OP’s list simply involve hitting the “Flash ClockworkMod Recovery” option in ROM Manager v3.0.1.0?
3. After that is it simply a matter of downloading my ROM of choice (Serendipity 5.12) and putting the .zip into my root folder, booting into recovery via the “Reboot into Recovery” option in ROM Manager, and then selecting to install the ROM .zip file?
4. Is my above three points everything I need to know or is there anything else I should know/be considered?
Also, when rooting I simply turned USB debugging on, ran the two .exe’s in order and then hit root after plugging in my phone. Was I supposed to go into download mode or anything or is that only for other modes of rooting (I have superuser installed and titanium backup was able to get root access so I assume my phone rooted properly).
That being said, I’ve read a ton of threads and a ton of stickies but things tend to seem either old/outdated or focusing on the AT&T i897, with there being limited information on a newbie friendly “explain all” way from A to B for the i896, unless I missed it. Some mention rooting with X, and using path ABC to root/flash a custom rom, and others mention rooting with Z and using patch DEF to do the same; all of which have left me feeling uneasy about flashing. ><
I'd be more then happy to provide any information in which I may have left out, and would appreciate any help I can get as I'm more then enthusiastic about flashing my first custom ROM but would like have the knowledge to do it right instead of being left with a brick. Yes, I know it seems almost all "bricked" captivates are unbrickable, though I would prefer to avoid that road at all costs either way haha.
mengbo said:
Another tip: do NOT restore all system data with TiBu after you flash!
Click to expand...
Click to collapse
I'm curious to know why not to restore system data?
Is "missing apps with data" ok to restore?
Restoring system data messes things up. Restore "missing apps with data" only. no system data.
If you restore system+data your home screen will fill up with force closes faster than you can clear them out, I know this Because I did it...twice, this is where my aww.W.T.F? sig came from. Don't panic if this noobish brain fart happens to you, just re-flash the rom and only restore missing apps+data as studacris said and enjoy.
Hi,
i currently have Froyo 2.2.1 + Root + Vodoo + Lagfix installled.
However, i am unhappy with the battery life with the voodoo kernel and want to get back to my CF Kernel.
I modded some of the stuff on my SGS (Camera App, Bootscreen, uninstalled some system apps).
First Question:
If i dont have any other issues, is there a reason to reformat the whole device (repart) so its back to stock like it was when i got it? I always felt better with a "fresh" installation of my windows, and somehow i feel like... how to say.. like i dumped my OS on the SGS with all the stuff i installed, reinstalled, deinstalled, flashed etc pp ^_^ But if you say, thats not an issue then i will leave it as it is.
Second Question (just to confirm what i am doing):
How do i uninstall vodoo and get back to what it was before installing vodoo? I want a fresh install after that.
1. Disable the Lagfix
2. Factory Reset
3. Flash JPY without Repart
4. Flash CF Kernel
5. Install Rom Manager + CWM
6. Install Deoexed Stock JPY Theme
7. Install Backup Apps/settings (not nandroid)
8. Profit
Correct?
Could i also restore a nandroid Backup from when i had the CF Kernel? (after step 5 ofc).
Thanks in advance
//EDIT:
To concretise my initial question:
When is repartition needed? (except when you crashed the OS on the phone )
Re partition is only needed when you have a firmware with all 3 files.. and something is corrupted preventing the phone from booting...
you dont need to do a full wipe.. you could get away with just removing lagfix and restoring back to JPY firmware... BUT doing a full factory reset would remove any unwanted things giving you that 'fresh out the box' feel... somethings tend to get left behind if a wipe isnt done.
your steps 1-8 are all in the right order you can disable lagfix thru CWM
i always do a full wipe before installing another ROM it makes me feel better
i always do a full wipe before installing another ROM it makes me feel better
Click to expand...
Click to collapse
Yes same reason why i did ask
So, I did steps 1 and 2, but instead of flashing the JPY i tried to flash the brand new JS5.
Now i have this issue:
http://forum.xda-developers.com/showpost.php?p=11372249&postcount=5
(to keep topics separated please answer there)
I had my phone stolen the other day, but I got it back (thanks Cerberus). I want to do a complete system wipe (as in deleting current firmware and reinstalling, not just factory reset) as I'm nervous about what they might have done to it, and because it still seems a bit slow, even after a Factory reset, Cache wipe, and dalvik wipe. I have already rooted using method 1.A. from this forum, so I have the "Wipe Data-Cache-System-Preload" option in PhilZ's bootloader (which I'm assuming does what I'm looking for). I would like to use the firmware on the Sammobile website for my country (Chile (ENTEL)), but I have a couple questions I haven't been able to find an answer to.
1. Is what I'm doing safe? Can you use the Sammobile Firmware's after doing a "Wipe Data-Cache-System-Preload"? Will it raise the counter or change the fact that I have a safe kernel currently?
2. Will I lose my current root access and/or PhilZ's bootloader? If so, is this a problem at all? Will I be able to re-root with the same method, or will that mess something up considering that the bootloader had already been modified the first time I rooted?
Sorry for being an overly anxious noob, but I just barely got my phone back, and I don't want to brick it.
the_angel_moroni said:
I had my phone stolen the other day, but I got it back (thanks Cerberus). I want to do a complete system wipe (as in deleting current firmware and reinstalling, not just factory reset) as I'm nervous about what they might have done to it, and because it still seems a bit slow, even after a Factory reset, Cache wipe, and dalvik wipe. I have already rooted using method 1.A. from this forum, so I have the "Wipe Data-Cache-System-Preload" option in PhilZ's bootloader (which I'm assuming does what I'm looking for). I would like to use the firmware on the Sammobile website for my country (Chile (ENTEL)), but I have a couple questions I haven't been able to find an answer to.
1. Is what I'm doing safe? Can you use the Sammobile Firmware's after doing a "Wipe Data-Cache-System-Preload"? Will it raise the counter or change the fact that I have a safe kernel currently?
2. Will I lose my current root access and/or PhilZ's bootloader? If so, is this a problem at all? Will I be able to re-root with the same method, or will that mess something up considering that the bootloader had already been modified the first time I rooted?
Sorry for being an overly anxious noob, but I just barely got my phone back, and I don't want to brick it.
Click to expand...
Click to collapse
Yes you can download the firmware from sammobile or even from here (if it exists here):
http://forum.xda-developers.com/showthread.php?t=1424997
Yes, what you are doing is safe. the method for flashing stock rom is also in the above link. it will not raise the counter, you will lose root and would be back to stock kernel and there is no problem in that.
Yes you can flash philz kernel again once you are done flashing stock rom.
Edit: flash .zip file for philz kernel after flashing rom again to avoid raising counter.
Ok thanks! Is this process of re-installing the firmware going to actually delete the old firmware first? As opposed to just write over it? Will it have the same effect as the "Wipe Data-Cache-System-Preload" option in PhilZ kernel?
the_angel_moroni said:
Ok thanks! Is this process of re-installing the firmware going to actually delete the old firmware first? As opposed to just write over it? Will it have the same effect as the "Wipe Data-Cache-System-Preload" option in PhilZ kernel?
Click to expand...
Click to collapse
it is the process of over writting if you do not clear up the data or system or preload (which you already did and if the rom is non wipe rom). As you have cleaned up data, system, preload and rest it is the process of reinstalling the firmware as there is no ROM to boot to at that point (i.e once you have cleaned up everything).
So in the thread you linked to it gives these instructions:
Installation
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First wipe cache and data
And you are saying I should do this instead:
Installation
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First "Wipe Data-Cache-System-Preload"
And then continue with the rest of the process?
the_angel_moroni said:
So in the thread you linked to it gives these instructions:
Installation
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First wipe cache and data
And you are saying I should do this instead:
Installation
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First "Wipe Data-Cache-System-Preload"
And then continue with the rest of the process?
Click to expand...
Click to collapse
if you are rooted already and have backed up apps+data (non-system apps) with TBP you can follow any of the method (preferably 2nd) and once you are done flashing, root again using philz kernel and restore apps+data using TBP. Also if you go to philz recovery and then to wipe data/factory reset you will also find option for clean up to install new rom (something like that). Usually this method is often used if you are flashing custom rom but you can still do it even if you are flashing the stock rom (even same) again. Under mount/storage you can also mount USB storage while connected to pc and delete everything from internal sd before flashing too.
treacherous_hawk said:
Also if you go to philz recovery and then to wipe data/factory reset you will also find option for clean up to install new rom (something like that).
Click to expand...
Click to collapse
It is called "Wipe Data-Cache-System-Preload." This is exactly the information I wanted, thanks so much again!
I am planning to flash a custom rom on my phone (for the first time).
Model : Xperia SP(C5302)
Build : 12.1.A.1.205 (Stock) running JB 4.3 with LB
I have rooted my phone using the towelroot method and installed supersu. I have also installed custom recovery from here http://forum.xda-developers.com/showthread.php?t=2649923
I am planning to flash this custom rom http://forum.xda-developers.com/xperia-sp/development/cyanogenmod-11-locked-bootloader-users-t2868398
So I have a few questions that I am not clear about(even after searching the forums). And sorry if they are dumb. I really want to understand as much as possible before flashing roms.:fingers-crossed:
1. After reading the thread of my recovery, from what I understand, the recoveries are installed in /system. But on OP of the custom rom, I am about to install, there is an instruction to format /system before flashing the rom. So my question is if I format the /system partition, won’t my recoveries be removed (by the recoveries itself) before I even flash the rom?
2. Also will the recovery still be available to me if say I enter bootloop for some reason during flashing the rom?(asking for the same reason as above that is wiping my /system should also remove my recoveries)
3. Does CM 11 come with any inbuilt custom recovery? If not can I install the one I am already using (assuming installing a custom rom will remove my installed recoveries)?
4. Say I screw up during the flashing procedure. So if I want to rectify this I should first flash the stock .205 ftf, root, install a recovery again and then restore using the nandroid backup. Am I correct?
5. Is it necessary to wipe cache and dalvik cache before flashing rom? I see this instruction in some roms but not in others. And dalvik should be wiped after flashing rom and gapps, right?
6. Should I install supersu again after I flash the rom. I read in an article that it causes problems with CM. As far as I know CM11 comes pre-installed with superuser. But it also supposedly causes some problems.
7. Is it safe to restore user app+data, messages and contacts backed up using Titanium backup on a newly flashed rom? I have seen conflicted views on this.
Click to expand...
Click to collapse
And that’s it for my questions (for now at least... ).
A Big Thanks in advance for all your helpful answers
Prat92 said:
I am planning to flash a custom rom on my phone (for the first time).
Model : Xperia SP(C5302)
Build : 12.1.A.1.205 (Stock) running JB 4.3 with LB
I have rooted my phone using the towelroot method and installed supersu. I have also installed custom recovery from here http://forum.xda-developers.com/showthread.php?t=2649923
I am planning to flash this custom rom http://forum.xda-developers.com/xperia-sp/development/cyanogenmod-11-locked-bootloader-users-t2868398
So I have a few questions that I am not clear about(even after searching the forums). And sorry if they are dumb. I really want to understand as much as possible before flashing roms.:fingers-crossed:
And that’s it for my questions (for now at least... ).
A Big Thanks in advance for all your helpful answers
Click to expand...
Click to collapse
First of all, I am only explaining the one I know about
1. Well, wiping the system will remove the recovery. That's why you'll have to flash the ROM after wiping the system. Do not ever reboot the phone after wiping the system but haven't yet flashed the ROM zip, else you'll have to do more work to flash the Stock ROM. This is due to the fact your phone does not have an OS to boot into! When flashing the ROM zip, the recovery will be automatically installed.
2. This is based on luck, most of time you'll end up unable to boot into anything. A fix is to flash the Stock ROM again.
3. Every ROM has recovery built with it (unless stated otherwise in the thread)! Upon flashing, it will be automatically installed too.
4. The methods you mentioned is correct. However, only restore the nandroid backup if you want to stay on stock. You could always retry to flash the ROM again. Nandroid backup is an image backup of your android. If you restore your nandroid backup, you'll end up with your previous version of android (like the way before you started flashing the ROM)
5. Wiping /cache and dalvik-cache is a really good practise! It doesn't really matter when you will need to wipe them, but personally I wipe them all before flashing the ROM. Wiping /data and performing a factory reset through recovery is recommended if you're coming from a different ROM. That's why backing up user apps through TiB (Titanium Backup) is recommended for you to easily get your installed apps back. Remember, nandroid backup and apps backup from TiB is different to each other.
6. No, this might cause extreme conflicts. No, I am using SuperUser as long as I have used CM. It never fails to give root permission at all despite the hatred I sense in some apps that overly-recommends SuperSU.
7. Of course it is very safe to restore them backups with TiB. However, based on my experience, messages and contacts were unable to be restored due to the difference in ROM version. I don't know if anyone else faces the same problem as mine. As of this, I really recommend your contacts to be synced with Google.
Heads up!
Based on this post, the dev of the ROM you wanted to flash, MrSteve555, recommends PhilZ when flashing the ROM.
TechnoSparks said:
First of all, I am only explaining the one I know about
1. Well, wiping the system will remove the recovery. That's why you'll have to flash the ROM after wiping the system. Do not ever reboot the phone after wiping the system but haven't yet flashed the ROM zip, else you'll have to do more work to flash the Stock ROM. This is due to the fact your phone does not have an OS to boot into! When flashing the ROM zip, the recovery will be automatically installed.
2. This is based on luck, most of time you'll end up unable to boot into anything. A fix is to flash the Stock ROM again.
3. Every ROM has recovery built with it (unless stated otherwise in the thread)! Upon flashing, it will be automatically installed too.
4. The methods you mentioned is correct. However, only restore the nandroid backup if you want to stay on stock. You could always retry to flash the ROM again. Nandroid backup is an image backup of your android. If you restore your nandroid backup, you'll end up with your previous version of android (like the way before you started flashing the ROM)
5. Wiping /cache and dalvik-cache is a really good practise! It doesn't really matter when you will need to wipe them, but personally I wipe them all before flashing the ROM. Wiping /data and performing a factory reset through recovery is recommended if you're coming from a different ROM. That's why backing up user apps through TiB (Titanium Backup) is recommended for you to easily get your installed apps back. Remember, nandroid backup and apps backup from TiB is different to each other.
6. No, this might cause extreme conflicts. No, I am using SuperUser as long as I have used CM. It never fails to give root permission at all despite the hatred I sense in some apps that overly-recommends SuperSU.
7. Of course it is very safe to restore them backups with TiB. However, based on my experience, messages and contacts were unable to be restored due to the difference in ROM version. I don't know if anyone else faces the same problem as mine. As of this, I really recommend your contacts to be synced with Google.
Heads up!
Based on this post, the dev of the ROM you wanted to flash, MrSteve555, recommends PhilZ when flashing the ROM.
Click to expand...
Click to collapse
Thanks for such detailed answers. That cleared most of my doubts
Just some last few questions(promise!)
1. If wiping /system does remove the recovery before I install the rom, how is it possible to access it even to flash the rom? Shouldn't it like just close right when I wipe /system. Or does it not work like that?
2. Just to be sure the nandroid backup I made on my stock rom won't work if I later try to flash it through recovery while using CM,right?
Prat92 said:
Thanks for such detailed answers. That cleared most of my doubts
Just some last few questions(promise!)
1. If wiping /system does remove the recovery before I install the rom, how is it possible to access it even to flash the rom? Shouldn't it like just close right when I wipe /system. Or does it not work like that?
2. Just to be sure the nandroid backup I made on my stock rom won't work if I later try to flash it through recovery while using CM,right?
Click to expand...
Click to collapse
1. Wiping system wont close the recovery at all. It still runs and you can still navigate within it. But remember do not reboot unless you've flashed the ROM! The mechanism of how the magic works is yet to be acknowledged. So I can't tell why it doesn't closes upon wipe. My best guess here is that the recovery might be running on a temporary partition perhaps. I hope a developer see this post and explains the magic.
2. Nandroid backup works all the time (if they are no errors when you are creating them). Nandroid backup is simply a backup of your whole device. If you're on CM, restoring nandroid backup will get your phone back to the way when you attempted the nandroid backup (stock ROM, rooted, and triple recoveries installed). Nandroid backup is useful when you're about to try something that may damage your ROM, without doing so much work to restore your device.
Say, you created a nandroid backup in cwm in which Cyanogenmod was installed. And then you flashed something afterwards. If that "something" damages the ROM and gives you bootloop, you can simply flash Stock ROM, root it again, install recoveries again, and restore the nandroid backup. Then, voilà, cyanogenmod is back. This will simplify your work rather than flash CM again, then gapps, then restore your apps and all those other things that will consume so much time
So a new nandroid backup will backup the whole device, in a form of an image.
Just trying to find out if before i install computerfreek's rom that all i need to do is go to wipe and just do a factory reset or, like i've seen some of rootjunky's video's, he goes into advanced wipe and selects dalvik cache, system, data, and cache. Not sure what is necessary and the directions say just to install it but rootjunky wipes some things so i'm not sure what to do that would have the best outcome.
Thanks guys!!
A factory reset will be fine. If you want to wipe everything like Rootjunky does, that's fine too. If you're going to wipe everything, make sure that you have a computer handy so that you can get the flashable zip back on there after everything is wiped.
Here are the directions from post #1 in computer freeks thread.
Step 1 Phone bootloader must be unlocked via sunshine root. I will no longer help users unlock please see sunshine If you need an none xposed ver use @firstEncounter v3 listed here. I blocked my no xposed img from downloads. I know it worked for most users but there was a few it did not and hung up on sunshine server blocking there IP. @jcase recommend you use @firstEncounter v3 or update to stock .44 then unlock with sunshine.
Step 2 Install Twrp Recovery Get it here.
Step 3 Enter recovery Copy my rom/zip to your phones storage device.
And any other options your download from here xposed and PON-3 put all zip's on phone storage. And flash/install in recovery computerfreek_Unlocked_1.X 1st then install/flash xposed,Pon-3 zip's
Step 4 In recovery click install select my rom .zip and slide to install
Step 5 Hit home and go to wipe for best results slide bar to do factory reset.
Step 6 Reboot system
Step 7 Your done setup your phone xposed and pon-3 audio if you install it.
Step 8 If you flashed xposed you need to install the APK now.
Yeah I've read that part and it doesn't say to do anything before installing the rom, just goes straight to flashing then factory reset. Wasn't sure if I should do any sort of wipe before I install it or not is all. Haven't flashed stuff on a phone on a couple years so I've sort of lost touch with it all but I did do tons of reading but couldn't find this one answer.
Thanks st33v! I'll do that and keep the computer handy. Hopefully this post helps others with the same thing I had. Just some minor confusion.
I mean technically, if you're coming from the stock rom, you could flash CF's rom without wiping anything and still be okay, but it never hurts to be extra careful and start from a clean slate.
Yeah, i always figure its best to have a clean slate plus, i like the clean slate feel again